Condition: used, Zwick / Roell Type: Z020 Allround-Line BT1-FR020TN.A50 Zwick / Roell Material Testing Machine, 20 kN, Tensile & Compression Testing, testXpert III For sale is a high-quality Zwick / Roell material testing machine for professional tensile and compression testing of materials and components. The machine is suitable for metals, plastics, rubber, and many other materials and is typically used in laboratories, quality assurance, research, and education. The machine is controlled via a PC with Zwick/Roell testXpert III software (storage medium and documentation available). Technical Data: Nominal testing force: 20 kN Testing direction: Tensile & Compression Power connection: 230 V / 50–60 Hz / 1-phase Power consumption: approx. 2.1 kVA Weight: approx. 150–180 kg Dimensions: approx. 856 × 650 × 1,545–2,114 mm Technical Data (from documents & nameplate) Mechanics / Testing Nominal force: 20 kN Testing direction: Tensile & Compression Max. testing frequency: 0.5 Hz Crosshead: servo-electric Positioning accuracy: < 1 µm Speed range: 0.0005 – 1,000 mm/min Dimensions & Weight Overall height: approx. 1,545 – 2,114 mm (depending on the crosshead position) Overall width: approx. 856 mm Overall depth: approx. 650 mm Working space width: 440 mm Weight: approx. 150 kg (basic unit) approx. 180 kg with typical equipment Electrical Data Power connection: 230 V AC Phases: 1-phase (1PH, N, PE) Mains frequency: 50 / 60 Hz Current consumption: approx. 8–10 A Power consumption: approx. 2.1 kVA Socket: Schuko (CEE 7) Measuring & Control Electronics Internal measurement value acquisition: 500 Hz Data transmission to PC: 10–100 Hz adjustable Lrsdpfx Aszimgtoh Sju Interface: RS232 (COM) Protection class for electronics housing: IP32 Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of supply: (See picture) Zwick / Roell material testing machine (20 kN) Electronics unit PC workstation (monitor, PC condition see pictures) 2 measuring modules (Delock units) Zwick/Roell testXpert III software (storage medium) Original operating and technical documentation Various connection and linking cables (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Spectro Type: SpectroMaxX LMD08 / LMX08 Date: 07/24/2020 Complete analysis using the stationary spark optical emission spectrometer SpectroMaxX: Using the spark optical emission spectrometer, the alloy compositions and trace elements of macroscopic solid samples can be determined with high accuracy, down to the ppm range. Description of the system: Open spark stand for high sample throughput A wide variety of sample geometries are possible The following elements are available as a basis: Magnesium The analyzable elements and concentration ranges depend on the methods available for the respective base element. Usable wavelength range: 170-670 nm Output of measurement values in concentrations or intensities Selectable output units (%, ppm) Lodpfx Ajzizdtjh Ssru Output of statistical parameters (mean, RSD) SPECTROMAXx LMX08 Technical specifications: CCD optics: High-resolution CCD multi-detectors Stabilized against temperature fluctuations Effective wavelength range: 140-670 nm; the applicable and configured wavelength range depends on the customer's application requirements. Automated profiling Analysis modules: Freely selectable analysis modules Optimized for customer requirements Expansion with additional modules possible on-site Spark stand: Open spark stand for high sample throughput and various sample geometries Minimized argon consumption due to the argon-saving module Optimized argon flow Reduced cleaning intervals Spark stand plate easily replaceable Temperature-absorbing design without water cooling Integrated shutter system for optimal plasma view Excitation system: Fully digitized plasma generator with digital discharge definition, digital pulse generation, and digital offline pulse control 32 MHz microcontroller Max. spark duration: 4000 µs Max. spark power: 4 kW Display system: Dedicated microcontroller for each CCD Serial source interface Spectrometer: External, state-of-the-art computer PC system with Windows operating system Keyboard and mouse Monitoring Software: Spark Analyzer Pro MAX software for analytical operation and calibration Continuous automatic hardware diagnostics in the background Automatic verification and identification of alloy/grade Result Manager Online maintenance scheduler Environmental conditions: Room temperature: 10-30°C Conditions: (10-30°C) Relative humidity:

Condition: used, FARO Measuring arm / 3D coordinate measuring arm FARO Prime measuring arm Mobile 3D measuring system / Portable CMM for industrial metrology For sale is a used FARO Prime measuring arm including accessories, transport case, and HP laptop. The measuring arm is suitable for mobile 3D measurements, quality control, component testing, reverse engineering, toolmaking, fixture construction, and industrial metrology. Technical data Manufacturer: FARO Technologies Type: Prime Device type: Portable 3D coordinate measuring arm / Portable CMM Date of manufacture: 10.09.2013 Calibration date according to certification: 25.06.2015 Revision: 28.1 Made in Switzerland Measuring range: approx. 1.8 m (6 ft) Axes: 6 Single point accuracy: 0.019 mm Volumetric accuracy: ±0.027 mm Repeatability: up to 0.016 mm Bluetooth wireless technology Integrated battery operation Temperature compensation Portable measuring arm technology USB interface Compatible with multiple probe systems Weight of measuring arm: approx. 9.3 kg Total weight including case and accessories: approx. 35 - 50 kg Ledpfx Ahszc Erpj Sjru Equipment Mobile FARO Prime measuring arm Reference sphere / Calibration sphere Measuring probes / Probe set Base plate / Mounting plate Transport case HP EliteBook laptop Software data carrier USB dongle Operating instructions / Manuals Accessories according to pictures Application areas 3D coordinate measuring technology Quality assurance Incoming goods inspection First article inspection Component control Reverse engineering Tool and mold making Fixture construction Mechanical engineering Automotive industry Aerospace technology Condition Used Optical condition according to pictures Scope of delivery as shown in the pictures A complete technical function test has not been carried out Scope of delivery 1x FARO Prime measuring arm 1x Transport case 1x HP EliteBook laptop 1x Reference sphere 1x Base plate Measuring probes / Probe set Software data carrier USB dongle Documents and other accessories according to pictures The table shown in the photos, or other items not explicitly mentioned, are not part of the sale. Shipping or freight forwarding is possible. Subject to change, errors and prior sale. We are happy to answer any further questions by telephone.

Condition: used, et ETSYSTEM Electronic Load GPIB Here we offer you an et ETSYSTEM Electronic Load GPIB. 32615A AC & DC Electronic Load GPIB/RS232 300V, 108A, 10800VA The 3260A series is a 300V high-performance AC and DC load in a single unit, providing an ideal testing solution for UPS, AVR, and D/A inverters, especially for devices under test with step or square wave forms. Each AC&DC load in the high-performance series has its own control and display panel, and a 5-status recall/memory, enabling more efficient load setup. The adjustable power factor setting (PF, range: 1, 0.85 ~ -0.85) expands the simulation of the test environment. Lrsdpszd Uh Iofx Ah Sou The integrated GO/NG measuring device test function provides a quick diagnosis of test results for production and QC test throughput. Features Voltage, current, watt, and VA variable display. CC, linear CC, CR, and crest factor mode. GPIB/RS232 interface and 5 status recall/memory. Power factor (PF) adjustable: 1, 0.85 ~ -0.85. Upper/lower threshold capability. Protection against V, I, W, and ℃. Dual 4 1/2-digit meter display for voltage, current, watt, and VA. Suitable for sine, square, and step waves. Width 600 mm, height 1506 mm, depth 600 mm 196kg Type: 32615A AC & DC Electronic Load Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, IMV Type: i240 + Amplifier SA3M + Fan Dimensions: Power amplifier: SA3M-i40EM-CE WxHxD 580 x 1950 x 850 mm Vibration exciter: i240 WxHxD 1234 x 997 x 720 mm Technical data of the system: Armature mass: 20 kg Armature diameter: 290 mm Armature resonance: 2300 Hz Permissible eccentric moment: 850 N·m Frequency range: 0-2600 Hz Maximum force: 24 kN (Sine and random) 48 kN (Shock) Maximum acceleration: 1200 m/s² (Sine) 840 m/s² (Random) 2400 m/s² (Shock) Ljdpfozimf Aex Ah Seru Maximum displacement: 100 mm p-p Maximum load capacity: 400 kg Environmental conditions: Temperature 0-40 °C, humidity 0-85 %RH Maximum output power: 30 kVA (SA3M-i40EM-CE) + Shaker armature 290 mm Usable up to 2000 Hz Weight: 410 kg (SA3M-i40EM-CE) Total weight approx. 2800 kg Condition: used Scope of supply: (See image) (Changes and errors in the technical data and specifications are subject to change!) We will gladly answer any further questions you may have by telephone.

Condition: used, Original ZEISS CMM Probe Holders and Stylus Extensions Original ZEISS probe holders Stylus extensions Various star styli and straight styli As shown in the pictures Condition: Used Good working condition Carefully removed from a functioning ZEISS CMM Lodpszg Eczsfx Ah Soru Ideal for ZEISS CMM users looking for original replacement or additional probing equipment.

Condition: used, Universal Shaker Accessories / Clamping Devices Universal Shaker Accessory Kit Precision clamping devices, angle adapters, adapter elements, and holding devices for vibration test benches, vibration tests, and special designs For sale is a used accessory kit for an electrodynamic shaker or vibration test bench. The kit consists of numerous solid aluminum clamping devices, angle adapters, adapter plates, clamping blocks, holding elements, precision chucks, and other accessories for vibration tests. Ideal for test specimen mounting, special designs, and customized test setups. Technical data: Manufacturer: unknown Type: Accessory kit for electrodynamic shaker / vibration test bench Material: predominantly aluminum Design: Clamping devices, angle adapters, adapter elements, and fasteners Components: Several clamping devices Angle adapters of various sizes Precision adapter elements Clamping blocks Adapter plates Aluminum rings Holding and fastening elements Other accessories as shown in the pictures Features: Solid aluminum construction Precision-engineered components Threaded holes and clearance holes Universally applicable Clamping devices Angle adapters Adapter elements Clamping blocks Accessories as shown in the pictures Applications: Electrodynamic shakers Vibration test benches Vibration testing Material testing Environmental simulation Research and development Automotive industry Aerospace Test specimen mounting and special designs Scope of delivery: Complete accessory kit as shown in the pictures Clamping devices Ljdpfx Ahjzpya He Soru Angle adapters Adapter plates Clamping blocks Adapter elements Aluminum rings Other accessories as shown in the pictures Weight: 600 kg Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches, and pressure marks are present. Only the accessories shown in the photos are being sold. The table shown in the photos, and any other items not explicitly mentioned, are not included in the sale. Shipping on a pallet or collection is possible. Subject to changes, errors, and prior sale. We will gladly answer any further questions by telephone.

Condition: used, Johansson Type: Johansson Cordimatic 7000 Coordinate Measuring Machine The coordinate measuring machine for measuring large workpieces. Johansson Cordimatic 7000 measuring machine with Renishaw retrofit (control, rotary/swivel probe & probe changer library) Johansson Cordimatic 7000 measuring machine with Renishaw rotary/swivel head PH10T Measuring range: 28" x 17" x 13.5" Granite table size: 42" x 28" x 8" Equipped with: Computer Metrologic 1 joystick pendant control Metrologic software manuals Joystick and control from RENISHAW SPA2 servo power amplifier Ledpfx Ajzd N Sheh Soru UCC2 controller Condition: used Scope of delivery: (See image) (Changes and errors in technical data and information are subject to change!) We would be happy to answer any further questions you may have over the phone.

Condition: used, Lindner Type: AGB Burst Testing Stand TMM4 Lindner Burst Testing Stand AGB Burst Testing Stand TMM4 Technical Data: AGB Burst Testing Stand TMM4 Year of manufacture: 2015 Rated voltage: 3/N/PE AC 400V Rated power: 5.5 kW Temperature range, chamber: RT ... 180°C Temperature range, medium: RT ... 135°C Pressure range: 0 ... 5 bar Compressed air supply: 6-8 bar Test medium: Glycol / Water Heat transfer fluid: Fragoltherm Q-HTF Dimensions: Length 2150 mm x Width 1050 mm x Height 2160 mm Operating voltage: 3/N/PE AC 400V +/-10% 50Hz Power: 5.5kW Rated current: 8A Fuse: 16A Control voltage: 24VDC PLC system: S7-1215 DC/DC/RLY Lrjdpfjzd Sivsx Ah Seu The following items are required to put the burst testing stand into operation: Pump, cooling tower & fire alarm control panel – these are not included. Weight: approx. 705 kg Condition: used Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will gladly answer any further questions you may have by phone.

Condition: used, Hardy Type: Hardy TH453-W2E-II Never used (exhibition model) Water-cooled Here we offer an unused Hardy duplex climate chamber for temperature and humidity testing. The system has two test chambers arranged in a common housing. Both test chambers can be operated independently. This allows two different tests to be carried out simultaneously. The climate chamber is prepared for testing with lithium-ion batteries and is particularly suitable for batteries from power tools, e-bikes and comparable applications. Technical data Number of test chambers: 2 Operation of test chambers: independently of each other Test chamber volume: approx. 300 liters per test chamber Test chamber dimensions per test chamber: 850 × 600 × 600 mm, width × depth × height External dimensions: 1,150 × 2,115 × 1,922 mm, width × depth × height Lredpfx Aszv Rrmoh Sju Temperature range: -45°C to +100°C Temperature deviation: ±0.5°C Temperature change according to data sheet: Heating rate ≥ 2°C from +25°C to +100°C, empty and non-linear Cooling rate ≥ 2°C from +25°C to -45°C, empty and non-linear Humidity range: 20% RH to 98% RH Temperature range during humidity operation: +20°C to +85°C Condition: New Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone.

Condition: used, Weiss Type: SWT 600/800-S Spray Water Test Unit for IP protection tests IPX1 / IPX2 / IPX3 / IPX4 / IPX4K / IPX9K For sale is a professional spray water test unit from Weiss Umwelttechnik GmbH. The unit is used to perform standardized water, spray water, and ingress protection tests on components, housings, electronic components, vehicle parts, and technical products. Suitable for industry, automotive, electronics, quality assurance, development, testing laboratories, as well as research and material testing. Operation is via an integrated touch panel. Test sequences can be automated. The unit features a stainless steel test chamber, rotating test table, swivel arm, water circulation, and available test accessories. Technical data according to the nameplate / documentation: Electrical data: Voltage: 3/N/PE AC 400 V ±10 % Ljdpszachcefx Ah Sjru Frequency: 50 Hz Rated power: 17 kW Rated current: 30 A Wiring diagram No.: 82962 CE marking available Water connection according to documentation: Water inlet: R 3/4" Water outlet: R 1 1/4" Water pressure supply line: approx. 2 – 6 bar Water pressure IPX9K: adjustable approx. 80 – 100 bar Turntable speed: approx. 1 to 5 RPM Swivel speed: approx. 60 °/s Permissible ambient temperature according to documentation: approx. 10 °C to 35 °C Dimensions and weight: Test chamber SWT 600/800: approx. 2350 x 2400 x 2650 mm with hinges and door lock Test chamber without hinges and door lock: approx. 2350 x 2400 x 1850 mm Weight of the test chamber: approx. 650 kg High-pressure unit: approx. 850 x 1200 x 800 mm Weight of the high-pressure unit: approx. 380 kg Total weight according to available data: approx. 1030 kg Noise level according to documentation: approx. 88 dB(A) Heat dissipation to the environment: average approx. 1 kW maximum approx. 3.5 kW Equipment: Touch panel Stainless steel test chamber Rotating test table Swivel arm Water circulation pump Nozzle ring / spray ring High-pressure unit Flow meter ESD earthing point CE marking Robust industrial design Available documentation: Operating manual EC declaration of conformity Quality test certificate Technical documentation as shown in the pictures Accessories include, among others, as shown in the pictures: Various spray and test components Nozzle ring / spray ring Swivel arm accessories Flow meter Connection components Tools / keys Test accessories Documentation and documents Inspection and testing on site is possible and desired after prior appointment. Scope of delivery: Weiss Umwelttechnik SWT 600/800-S Spray Water Test Unit High-pressure unit Turntable / swivel arm Test and spray accessories as shown in the pictures Operating manual / documentation Accessories and components as shown in the pictures Condition: Used Optical condition see pictures Scope of delivery as shown in the pictures The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping or freight forwarding is possible. Subject to changes, errors and prior sale We will be happy to answer any further questions by telephone.

Condition: used, G.i.N. Lrodpfx Aezg Tzrjh Sou Type: GL5350 GL5350-8H-1R3L G.i.N. Intelligent Data Logger GL5350 Performance Meets Intelligence Future vehicle generations will be increasingly equipped with intelligent driver assistance systems, complex multimedia components, and systems for autonomous driving. These complex, networked technologies generate ever-larger volumes of data, making troubleshooting during the development phase more complex and time-consuming. To shorten test drives, reduce their number, and still meet the testing requirements of all departments, the advantages of an intelligent and powerful data logger, such as the GL5300 series, come into play. The GL5300 series covers the time-synchronized recording of LIN/CAN & CAN FD bus systems, FlexRay networks, and Ethernet networks (TCP/UDP/DLT/ADB and Ethernet raw logging). This series also offers the connection of up to 8 cameras and up to 5 GLX504 units for an additional 20 CAN FD channels with SIC transceivers, as well as up to 3 GL5450 units for the synchronous recording of up to 60 100-Base-T1 lines (30 taps) and up to 18 1000-Base-T1 lines (9 taps). Residual bus simulation Classification unit Gateway CCP/XCP on CAN, XCP on CAN FD, XCP on FlexRay, XCP on Ethernet Sending of any, freely configurable messages Selective recording (extensive trigger and filter conditions) Data transfer via LAN/WLAN, USB and mobile network Operation via menu control Technical Data: GL5300 Configuration GL5350-8H-1R3L CAN Interfaces CAN 2.0 16 CAN FD 4 LIN Interfaces 5 RS-232 Interfaces 7 Analog Inputs 10 Bit 4 Operating Voltage +7 V … +50 V Power Consumption at 12 V: typ. 10.3 W Current Consumption at 12 V: in Sleep Mode < 2 mA in Half-Sleep Mode typ. 180 mA in Operation typ. 860 mA Operating Temperature Range -40 °C... +70 °C Housing: Material Side Profiles: Al Mg3 Cover: EN AW-6060 (AlMgSiO,5) T66 Decorative Strip: ABS Dimensions (LxWxH) 212x 290 x 80 Weight ~ 3500g Condition: used Scope of Delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have on the phone.

Condition: used, SincoTec Type: POWER SWING 20 kN POWER SWING 20 kN resonance testing system Sincotec Power Swing 20 kN resonance testing system Manufacturer's maintenance performed General information Lrjdpszii A Dsfx Ah Sou For sale is a used Power Swing 20 kN resonance testing system from Sincotec Test Systems GmbH. The testing system was used in a single-shift operation, and all maintenance work was performed regularly by the manufacturer. Special features: Robust construction for continuous operation Precise resonance testing up to 20 kN Manufacturer's maintenance available Ideal for research, testing, and development applications Technical data – Testing system Feature / Value Overall height of testing system 1215 mm (without clamping device) Width of testing system 2005 mm Depth of testing system 1205 mm Maximum force amplitude 10 kN Maximum total force ±20 kN Accuracy of measuring sensors min. Class 1 (according to DIN EN 10002-3) Technical data – Control cabinet Feature / Value Overall height of control cabinet approx. 1800 mm Height of tabletop 1080 mm Width of control cabinet 650 mm (narrow tabletop) / 1450 mm (wide tabletop) Depth of control cabinet 700 mm (narrow tabletop) / 800 mm (wide tabletop) Weight 152 kg (small tabletop) 187 kg (large tabletop) with (granite plate) 247 kg Conditions for the installation site Feature / Value Space requirement 4.3 × 3.0 m Required ceiling height 2.5 m Floor load-bearing capacity 234 N/cm² Mains conditions Feature / Value Voltage 400 V three-phase with neutral conductor and protective earth Phase sequence Right-rotating field Voltage fluctuations ≤ ±10 % Short-time dips < 20 ms Limits for sustained disturbances Radio interference level A according to VDE 0871 Frequency 50 Hz ± 1 % Protective earth / Grounding resistance < 0.3 Ω Connection and protection Feature / Value Voltage supply 400 V / 50 Hz (Right-rotating field) Connection plug CEE socket, 5-pole, 16 A Protection 16 A Weight of testing system approx. 3.6 t Max. weight clamping device 250 kg Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, ZEISS Multisensory CNC Coordinate Measuring Machine O-INSPECT 442 Professional coordinate measuring machine for optical and tactile precision measurements in industry, research, and quality assurance. For sale is a used multisensory coordinate measuring machine from the manufacturer Carl Zeiss IMT GmbH. The ZEISS O-INSPECT 442 combines highly precise optical and tactile measurement technology in a CNC coordinate measuring machine. The installed ZEISS CALYPSO measurement software enables convenient evaluation of measurement data as well as the display of the actual state, target profile, and deviations. The system is ideal for quality assurance, toolmaking, precision engineering, medical technology, as well as research and development. Lodezii Dhspfx Ah Ssru Technical data: Manufacturer: Carl Zeiss IMT GmbH Model: O-INSPECT 442 Type: Coordinate measuring machine Measuring range X: 400 mm Measuring range Y: 400 mm Measuring range Z: 200 mm Max. workpiece weight: 20 kg Noise level: < 70 dBA Measurement system: Multisensory measurement system Optical and tactile measurement CFS measuring head system CALYPSO measurement software CNC-controlled measurement sequences Electrical data: Supply voltage: 100 / 110 / 120 / 125 / 230 / 240 V AC (±10 %) Current type: 1 / N / PE Frequency: 50–60 Hz (±3.5 %) Power consumption: max. 1500 VA Dimensions: Width: 1,055 mm Depth: 1,351 mm Height: 1,770 mm Weight: Coordinate measuring machine: approx. 800 kg Max. workpiece weight: 20 kg Equipment: Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation CFS measuring head system Reference probe Calibration standard Calibration template Applications: Coordinate measuring technology Optical measuring technology Tactile measuring technology Quality assurance Toolmaking Precision engineering Medical technology Research and development Scope of delivery: ZEISS O-INSPECT 442 coordinate measuring machine Integrated control Control panel Computer with peripherals ZEISS CALYPSO Software 5.2 Documentation Measuring head system Reference probe Calibration standard Calibration template Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos or other items not explicitly mentioned are not included in the sale. Due to its size and weight, shipping is possible via a freight forwarder. Subject to changes, errors and prior sale. We would be happy to answer any further questions by telephone.

Condition: used, Manufacturer unknown Shaker Fixture Cube / Clamping Cube Aluminum Shaker Fixture Cube, approx. 240 × 240 × 240 mm Professional clamping cube for vibration testing systems, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of aluminum. The clamping cube is suitable for the flexible attachment of test specimens, measurement setups, and fixtures on vibration testing systems. The solid aluminum construction offers high rigidity and is ideal for vibration tests, environmental testing technology, mechanical engineering, as well as research and development laboratories. Technical data: Manufacturer: Unknown Material: Aluminum Type: Shaker Fixture Cube / Clamping Cube / Fixture Block External dimensions: approx. 240 × 240 × 240 mm 4 precision mounting holes, Ø approx. 85 mm Central through-hole Threaded holes on all side surfaces Precision-machined clamping surfaces Robust industrial design Weight: 30 kg Features: Solid aluminum construction Precision-machined clamping surfaces Threaded holes on all side surfaces Four large mounting holes Central through-hole Suitable for individual test setups High rigidity with a compact design Accessories as shown in the pictures Application areas: Vibration testing systems Vibration testing Environmental testing technology Test stands Metrology Mechanical engineering Special machine construction Automotive Aerospace Research and development Testing laboratories Industry Scope of supply: Aluminum Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Lrjdezp E Dkspfx Ah Ssu Optical condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service or freight forwarder is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by phone.

Condition: used, Zwick Type: HA 50 Dimensions: H 2685 mm x W 1040 mm x D 750 mm Footprint: 1600 cm² Technical data: Fmax: 50 kN Vmax: 1500 mm/s Working area height max. 1370 mm Working area width 565 mm Accessories: Kistler force sensor 50 kN via NI-Labview Hydraulic unit 280 bar Footprint: 415 cm² Clamping device / specimen holder available (Universal flange, high-strength jaws for specimen holder) Computer + testXpert R V6.0.0 software Condition: used Scope of delivery: (See image) Weight approx. 1200 kg without frame, etc. (Changes and errors in the technical data are subject to change!) Ljdpfjzil Uisx Ah Ssru We will gladly answer any further questions you may have by phone.

Condition: used, Mahr Type: Helio-Pan II 700 Helio-Pan II Max. workpiece weight 30 kg at center height 100 mm 80 kg at center height 150 mm Measuring range, length: 0 mm to 700 mm Measuring range, outer diameter: 0 mm to 120 mm Max. measurable runout: 100 mm Center height: 100 mm Measuring probes: probe and measuring slide, 1 mm x 5 mm Dimensions (W x D x H) Machine: 2060 mm x 920 mm x 1750 mm Controller box: 600 mm x 800 mm x 2200 mm Weight: approx. 900 kg Electrical power: 230 V / 1200 W / 50 Hz Air pressure: 6 bar Condition: used Scope of delivery: (See picture) (Subject to changes and errors in the technical data!) Lrjdpszd R U Dofx Ah Seu We will gladly answer any further questions you may have over the phone.

Condition: used, BAT Shaker Fixture Cube Magnesium Shaker Fixture Cube 400 × 400 × 400 mm Professional fixture cube for vibration test benches, environmental testing technology, vibration tests, and testing laboratories. For sale is a used Shaker Fixture Cube made of magnesium. The fixture cube is suitable for the flexible mounting of test specimens, measuring setups, and fixtures on vibration test benches. The robust magnesium construction offers high rigidity while maintaining a low weight and is used in testing and development laboratories. Technical data: Manufacturer: BAT Material: Magnesium Type: Shaker Fixture Cube External dimensions: approx. 400 × 400 × 400 mm Threaded grid on all sides Several large through-holes for mounting Robust, precision design Equipment: Magnesium construction Precision-machined mounting surfaces Threaded holes on all sides Large corner holes for mounting Suitable for individual test setups Accessories as shown in the pictures Application areas: Vibration test benches Vibration testing Environmental testing technology Automotive Aerospace Research and development Testing laboratories Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Lodpfx Ahjzkhxto Sjru Condition: Used Visual condition as shown in the pictures. Normal signs of wear and tear due to age. The table shown in the photos and any other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. We will be happy to answer any further questions by telephone.

Condition: used, DSM Lsdpfx Aozgabfjh Soru Type: DS 57 MDW, DS 57 SA + PosiControl + MultiPro TA Fastening system Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, BAT Shaker Fixture Cube / Clamping Cube Magnesium Shaker Fixture Cube Professional clamping cube for vibration testing rigs / shakers with an M8 thread grid for flexible test specimen mounting For sale is a used clamping cube for vibration and shock testing rigs. The adapter cube is used to securely hold test specimens on vibration testing rigs (shaker systems). Thanks to the numerous threaded holes on several sides, a wide variety of devices and test specimens can be flexibly mounted. The lightweight magnesium construction offers high rigidity with a comparatively low weight and is ideal for development, endurance, and environmental testing. Technical data: Manufacturer: BAT Type: Shaker Fixture Cube / Clamping Cube Material: Magnesium Threaded holes: M8 grid on several sides Dimensions (approx.): 300 × 300 × 300 mm Weight: approx. 28–32 kg (estimated) Features: Solid magnesium design M8 thread grid on several sides Two stop eyes Precision-machined clamping surfaces High rigidity with low weight Ideal for individual test setups Accessories as shown in the pictures Areas of application: Vibration testing rigs Shock testing Environmental simulation Automotive testing technology Aerospace Development and testing laboratories Quality assurance Industry Scope of delivery: Magnesium Shaker Fixture Cube Accessories as shown in the pictures Condition: Used Optical condition as shown in the pictures. Normal signs of wear and tear, scratches and marks are present. The table shown in the photos and other items not explicitly mentioned are not part of the sale. Shipping via parcel service is possible. Subject to changes, errors and prior sale. Lredpfxjzkgqnj Ah Ssu We will be happy to answer any further questions by telephone.

Condition: used, Nirox Sensor Nirox multi-Thick-MS1-CH1 Nirox multi-Thick-MS1-CH1 – Sensor for multi-layer thickness measurement For sale is a high-quality optical sensor of the type Nirox multi-Thick-MS1-CH1, developed for the precise and non-contact measurement of multi-layer materials such as plastic films, composite materials, or coated substrates. This sensor system is ideally suited for quality control in the plastics or packaging industry. Technical highlights: Model: multi-Thick-MS1-CH1 Manufacturer: Nirox s.r.l. (Italy) Function: Optical precision sensor for micrometer-accurate thickness measurement of individual layers Ljdpfeziiw Uex Ah Sjru Measurement method: A-scan / optical interference analysis Channel: 1 (CH1) Application areas: In-line measurement in production lines or laboratory use Typical materials: Multi-layer films, coated glass, technical laminates Condition: used Scope of delivery: (See image) Sensor multi-Thick-MS1-CH1 Connection cable (Changes and errors in the technical data and information are subject to change!) We would be happy to answer any further questions you may have by phone.

Condition: used, Mitutoyo Type: QS250Z Mitutoyo QS250Z CNC Vision Measuring Machine – Year of manufacture 2017 – including software & accessories For sale is a high-quality Mitutoyo QS250Z CNC Vision Measuring Machine from 2017, in very good condition. It is a precise optical coordinate measuring machine for non-contact measurement of workpieces. Ideal for quality assurance, incoming goods inspection, production, precision engineering, electronics, plastics technology, and more. What can the device do? The QS250Z is a CNC-controlled optical measuring machine for: 2D coordinate measurement Contour and profile measurement Measurement of distances, radii, angles, and diameters Measurement of holes, grooves, edges, and complex geometries Serial measurements with automated measuring programs Documentation and report generation via Mitutoyo software Measurement is performed non-contact using a high-resolution camera system with image processing. Ideal for sensitive or small components where tactile measurement is not suitable. Thanks to CNC control, automated measuring sequences are possible – perfect for recurring testing processes. Technical data: Model: Mitutoyo QS250Z Machine type: CNC Vision Measuring Machine Year of manufacture: 2017 Code No.: 359-508-10Y Manufacturer: Mitutoyo Corporation, Japan Electrical data: 200–240 V AC 50/60 Hz Power consumption: approx. 500 W Fuse: 250V T 2.5A Dimensions (approx.): Width: approx. 700–800 mm Depth: approx. 900 mm Lrjdpfxjynkbae Ah Sju Height: approx. 1,100 mm Weight (approx.): approx. 150–200 kg Important note: “The table shown in the photos is not included in the sale.” Condition: used Scope of delivery: (See image) Mitutoyo QS250Z main unit Joystick box Software package: QS-ConfigDisk QSPAK FORMTRACERPAK-AP MiCAT Vision / Form Manuals & documentation Various electronic circuit boards (see images) Other accessories as shown (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by phone.

Condition: used, Zwick Type: Z30 Technical data: Overall height 2114 mm, width 748 mm, depth 580 mm Fmax: 30 kN Vmax: 125 mm/s Accessories: Extensometer ClipOn 13.5 mm Extensometer ClipOn 40 mm Ledpfx Aszil Uceh Seru Computer + testXpert II V3.5 software Total weight approx. 500 Condition: used Scope of delivery: (See image) (Subject to changes and errors in the technical data and specifications!) We will gladly answer any further questions you may have over the phone.

Condition: used, RMS RMS Electrodynamic Vibration Test System Vibration exciter SW 3006+ Power amplifier TGA 1500 Technical data: Lodpfezd Rvzsx Ah Seru Sine: 3.7 kN Random: 3.7 kN Shock: 3.7 kN Displacement pk-pk: 26 mm Velocity: 0.9 m/s Acceleration: 80 g Cooling: air-cooled Condition: used Untested! Testing was not possible. Scope of delivery: (See image) (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: used, Dr. Hönle Dr. Hönle UV Technology – Bluepoint LED High-Power + Bluepoint 2 easycure – Complete system including LED spotlights & manuals For sale is a complete UV curing system from Dr. Hönle, consisting of two control units and several LED spotlights. Ideal for professional applications in electronics manufacturing, medical technology, optics, plastics processing and laboratory operations. Description: The system includes: Bluepoint LED High-Power control unit (REF 45250.c) Bluepoint 2 easycure control unit (REF 33900.a) Several UV LED spotlights (e.g. 365 nm, air-cooled) Adapter BP-LED 4-1 (REF 45970.a) – for controlling up to 4 spotlights Original operating manuals + CD The devices enable precise control of irradiation time, intensity and energy – perfect for reproducible UV curing processes in industry. Technical data: Bluepoint LED High-Power (45250.c): Supply: 36 V / 5.5 A Control of up to 4 LED spotlights UV intensity adjustable Time programs and energy measurement Bluepoint 2 easycure (33900.a): 230 V AC, 50 Hz 570 VA power consumption High-performance LED controller Industrial quality, Made in Germany Dimensions / Total weight: approx. 12–15 kg Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) Bluepoint LED High-Power Bluepoint 2 easycure LED spotlights (air-cooled) Adapter BP-LED 4-1 Operating manuals CD Original documents (Changes and errors in the technical data are subject to change!) We will be happy to answer any further questions you may have by telephone. Ljdpjzimamofx Ah Ssru