Year of construction: 2024, condition: refurbished (used), functionality: fully functional, Steel gauge block set, accuracy class 1 according to DIN ISO 3650, with 103 pieces, supplied with a new calibration certificate bearing the accreditation symbol (DAkkS), issued to the buyer. Hnedpfxjyyd Eqo Abtsk

Condition: excellent (used), Memmert Type: UFP 800 Basic Equipment of the Device - Electronic, fuzzy-supported PID process controller with continuous power adjustment and a time-saving self-diagnosis system for rapid fault detection (see chapter "Error Messages") - Language selection - Alphanumeric text display - Internal protocol memory with 1024 kB for storing actual temperature, setpoint temperature, air turbine, air flap, and error states with a timestamp - Device control and logging of actual values on MEMoryCard XL - Program sequence control for up to 40 ramp segments - Adjustable air turbine for forced-air cabinets (settings in 10% increments) - Servo-motor controlled air flap (settings in 10% increments) for recirculating or fresh air operation - Integrated weekly timer with group function (e.g., all working days) - Retractable push/turn knob for easy operation of the device - Visual alarm indicator - Built-in buzzer as an alarm for setpoint exceedance, as an acoustic signal at program end, and for input confirmation (key click) - Digital monitoring controller for overtemperature, undertemperature, and automatic setpoint-tracking monitoring (ASF) - Mechanical temperature limiter (TB, protection class 1) Hjdpeymm Erefx Abtsnk - Monitoring relay for heater shutdown in the event of a fault - Two separate PT100 temperature sensors, DIN Class A, 4-wire for control and monitoring - Convenient integrated 3-point temperature calibration - Temperature-dependent interior and door ventilation - Parallel printer interface (PCL3 compatible) - Serial RS-232C interface for computer-aided temperature programs and for reading the internal controller log Technical Data: - Chamber: made from stainless steel, highly stable and easy to clean due to deep-drawn profiled structure. - Housing (outer shell): textured stainless steel, rear panel galvanized steel sheet - UFP 800 mobile and lockable on wheels. - External dimensions: Width 1190 mm, Depth 750 mm, Height 1620 mm - Internal dimensions: Width 1040 mm, Depth 600 mm, Height 1200 mm - Volume: approx. 749 liters - Weight: approx. 170 kg - Power supply: 3N〜 400 V 50/60 Hz - Power consumption: approx. 4800 W 7A Condition: used Scope of delivery: (see picture) (Specifications and technical data subject to change and errors reserved!) We are happy to answer any further questions by phone.

Condition: ready for operation (used), Year of construction: 2024, Form tester Contour measuring station Hsdpfx Absyt Ux Totenk Marsurf 280 CD BG 22 Year of manufacture: 2024 Measuring range: 280mm Dismantling and packaging by Mahr technician The machine is packaged and ready for transport This offer is exclusively intended for commercial customers as defined in §14 BGB

Condition: good (used), MASS FLOW TRANSMITTER-PD340 Item: D_1596-Flowmeter-PD340, Digital flow meters Mass Flow Transmitter with or without display Hsdpfehcpwtsx Abtsnk (New or used) PD340. Ø 1" - 4". For more informations please contact us!

Condition: excellent (used), We offer you: 3D Manufacturing Measurement System Hnsdpfxow H Rb Sj Abtok Manufacturer: Keyence Model: XM-5000 Technical Data: - Maximum measuring range: 2000 × 1200 × 1000 mm - Measuring accuracy: ±(7 + 9L/1000) µm - Repeatability: ±3 µm Accessories, pictured tools, and clamping devices are only included in the scope of delivery if specified in the additional information. Subject to prior sale, changes, and errors in technical data and specifications!

Condition: excellent (used), Weiss Model: WK 5/55-120 Weiss Technik Climate Test Chamber WK 5/55-120 -55°C to +120°C / 5 m³ | Year of manufacture: 2016 The system is water-cooled, high-performance, and designed for continuous professional operation. For sale is a professional climate test chamber from Weiss Technik, model WK 5/55-120, manufactured in 2016. This unit is ideal for temperature, climate, and material testing in industrial, research, and development applications. With a temperature range from -55°C to +120°C and a humidity range from 10–95% RH, the chamber covers a broad range of testing scenarios. The spacious test chamber of approximately 5 m³ allows for testing of larger components or assemblies. Technical highlights: - Temperature range: -55°C to +120°C - Climatic range: 10–95% RH - Heating/cooling rate approx. 1.5 K/min - Requires water cooling Technical data: Manufacturer: Weiss Technik GmbH Model: WK 5/55-120 Year of manufacture: 2016 Hodpfx Aoymdc Iebtenk Dimensions / Volume - Test space volume: approx. 5 m³ - External dimensions (W×D×H): approx. 1900 × 4410 × 2621 mm - Internal dimensions (W×D×H): approx. 1600 × 1700 × 2000 mm Temperature range: -55 °C to +120 °C - Heating/cooling rate: approx. 1.5 K/min - Climatic range: 10 – 95 % RH - Dew point range: +4 °C to +85 °C Electrical data: - Mains connection: 3/N/PE AC 400V ±10% 50Hz - Rated power: approx. 47 kW (depending on configuration) - Rated current: 71 A - Customer-side fuse: 63 A Cooling water: - Water cooling required - Maximum cooling water consumption: approx. 7 m³/h - Inlet temperature: approx. 20 °C Noise level: approx. 76 dB(A) Weight: approx. 4,600 kg Scope of delivery: - Weiss Technik climate test chamber WK 5/55-120 - Control system - Operating manual (German) - Nameplate & documentation Condition: used Scope of delivery: (see photo) (Subject to change and error in technical data! All information provided without liability.)

Condition: excellent (used), Binder Model: FD 53 Binder drying oven, warming cabinet Warming cabinet with forced convection External dimensions (housing): Width (mm) 635; Height (incl. feet/casters) (mm) 620; Depth (without connections and attachments) (mm) 575; Depth (with connections and attachments) (mm) 690 Internal dimensions: Width (mm) 400; Height (mm) 400; Depth (mm) 340 Internal chamber volume (l) 53 Load per shelf (kg) 15 Permissible total load (kg) 40 Weight (empty) (kg) 44 Temperature range: approx. 5 °C above ambient up to (°C) 300 Electrical Data: Hjdpjyma Nwsfx Abtonk Rated voltage (±10 %) 50/60 Hz (V) 230 5.3 A Rated power (kW) 1.2 Energy consumption: at 70 °C (W) 172 at 150 °C (W) 429 at 300 °C (W) 951 max. 300°C Important note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: (See picture) (Specifications subject to change and errors excepted!) For further questions, we are happy to assist you by phone.

Condition: excellent (used), Zwick/Roell Zwick/Roell ProLine Universal Testing Machine Z010 TN – 10 kN Type: BT1-FB010TN.D30 For sale is a professional material testing machine from Zwick / Roell, suitable for tensile and compression tests up to 10 kN. The machine comes from industrial use and has been professionally maintained. General Data: Manufacturer: Zwick GmbH & Co. KG, Ulm Rated Force: 10 kN Type of Testing: Tensile and Compression Testing Technical Specifications: Crosshead speed: 0.001 – 1,000 mm/min Speed accuracy: 0.01% of Vnom Position resolution: 0.038 µm Position repeatability: < 2.0 µm Maximum test frequency: 0.5 Hz Data acquisition rate: 500 Hz Measured value transmission to PC: 10–100 Hz Force measurement according to ISO 7500-1 Dimensions & Weight: Height with leveling elements: approx. 1,331 mm Width with electronics: approx. 930 mm Depth with electronics: approx. 437 mm Work space width: 440 mm Work space height below: 1,050 mm Weight with typical fixtures: approx. 160 kg Electrical Data: Input voltage adjustable: 100–250 V Mains frequency: 50 / 60 Hz Power consumption: 800 VA Current at 230 V: approx. 3.4 A Protection: ≤ 16 A Connection: 1L / PE / N Documented Test & Calibration Records: 18.09.2017 Machine BT1-FB010TN.D30 testXpert II Version 3.2 tC-PC System Testing temperature: 23.3 °C Travel measurement system: incremental encoder (rotary) Force transducer installed 29.01.2014 Force transducer: Xforce HP Module: DCSC Calibrated at Zwick Ulm 28.08.2013 Force transducer: Xforce P Module: DCSC Rotation before test series: 120° testXpert control Documented service and calibration records are available. Hnodpfxeyl T U Dj Abtek Software & Control: Software: testXpert® II Documented version: V3.2 Installation documentation from version 2.2 Documentation status: March 2010 PC control: tC-PC Interfaces: RS232 / Ethernet Note: testXpert II is a professional industrial testing software. Installed Modules & Components DCSC measurement module Force transducers Xforce P / Xforce HP Incremental encoder (rotary position measurement system) ISO 7500-1 compliant force measurement Installed under crosshead Important Note: "The table shown in the photos is not included in the sale." Condition: used Scope of delivery: Material testing machine BT1-FB010TN.D30 PC with monitor Force transducer DCSC module Clamping fixtures / grips Adapters and brackets Tools Documentation folder with records Scope of delivery as shown in the pictures. (Subject to changes and errors in technical data and specifications!)

Condition: ready for operation (used), Year of construction: 2020, An optical 2D coordinate measuring machine Werth is available. Measuring range X/Y: 400mm/200mm, electrics: VDE 0113, magnification: 0.2x. Machine dimensions X/Y/Z: approx. 800mm/600mm/1200mm, weight: approx. 200kg. Including two computers, software, and one replacement glass pane. Documentation available. An inspection on site is possible. Hnodpfeyxq U Aox Abtjk

Condition: used, Year of construction: 2011, valve dimensional inspection * Hsdpfx Absyrg E Ajtjnk

Condition: excellent (used), For sale: professional portable surface roughness tester Mitutoyo SJ-210 manufacturer code: 178-560-01D drive: 0.75 mN Made in Japan Device for precise measurement of surface roughness according to ISO 1997. Condition: Used, in very good technical and visual condition. Fully functional. Display without any damage. Complete set as shown in the photos. Included: – SJ-210 measurement unit – standard drive attachment – Mitutoyo 178-601 reference specimen – power supply – cables – original carrying case – original packaging Hnsdpoyc Rwdofx Abtsk The device measures, among others: Ra Rz parameters compliant with ISO standards Ideal for: – quality control – CNC companies – tool shops – technical departments – measurement laboratories Industrial-grade equipment – this is not a budget laboratory version.

Condition: excellent (used), For sale: Hioki CT6711 – precision current probe, designed for accurate current measurements in laboratory, R&D, service, and industrial applications. The CT6711 model allows safe, non-invasive current measurement with high resolution and an extremely wide bandwidth, ideal for use with oscilloscopes and power analyzers. Key features: • Current range up to 30 A • Bandwidth up to 120 MHz • High measurement accuracy and stability • Fast range switching • Demag / Auto Zero functions • Robust, professional construction • Manufactured in Japan Condition: • Fully functional • Very good cosmetic condition • Equipment removed from laboratory / industrial use Included: • Hioki CT6711 current probe • Control unit • Full set of cables Hsdpfx Asyc Idbjbtenk • Original carrying case • Manufacturer’s documentation (manuals) Ready-to-use device – no hidden defects. Applications: • AC/DC current measurements • Power electronics • Research and development (R&D) • Inverter, power supply, and drive servicing • Laboratories and maintenance departments

Condition: excellent (used), CTS Type: CW-60/7 Walk-in Climate Test Chamber CTS Walk-in climate chamber 7 m³ Temperature & humidity testing from -60 to 120°C Description: For sale is a professional CTS climate test chamber, type CW-60/7. This is a professional walk-in climatic and temperature test chamber designed for industrial, research, and quality assurance applications. The system simulates extreme environmental conditions to test components, modules, or complete systems under realistic stress scenarios. The climate test chamber enables: - Temperature testing from -60°C to +120°C - Climatic testing with 10–95% relative humidity - Programmable temperature and humidity cycles - Endurance stress testing - Trend recording - RS232 / RS485 interfaces - Manual or automatic program operation Particularly suitable for: - Electronics testing - Solar modules (former application) - Automotive components - Materials testing - Endurance tests Airflow management ensures very uniform temperature distribution throughout the entire 7 m³ test chamber. Technical data: Temperature: -60°C to +120°C Change rate approx. 2 K/min Humidity: 10–95% r.H. Dew point range: +5°C to +89°C Refrigerants: R404A/R23 Max. allowable pressure: 25 bar III.6 Quick Start Instructions Volume: Test volume: 7 m³ Walk-in design (walk-in) Internal dimensions: approx. 1,400 x 2,200 x 2,250 mm (W x D x H) External dimensions: approx. 4,990 x 1,851 x 2,500 mm (L x W x H) Power / Connection: 400 V, 3/N, 50 Hz Rated power: 43.1 kW Rated current: 67.5 A Protection class: IP54 Weight: 4,000 kg Condition: used Delivery scope: (see pictures) (Specifications and technical data subject to change and error!) For further questions, please feel free to contact us by phone. Hodpsylxaxsfx Abtonk

Condition: excellent (used), Professional Fluke DS703 FC diagnostic videoscope for visual inspection of hard-to-reach areas, maintenance, service, and energy sector applications. The FC (Fluke Connect) version enables wireless transmission of images and data. Key features: • Large, clear high-resolution LCD screen • Adjustable LED probe lighting – provides clear images in dark spaces • Fluke Connect (FC) – save, share, and archive inspection results • Intuitive operation, robust industrial-grade housing • Image/video recording functions (for inspection and reporting purposes) Set (as shown in the photos): • Fluke DS703 FC main unit • Inspection probe • Original Fluke case / carrying case • Cables / accessories as visible in the photos • Manuals / software media (if shown) Hnodpfx Abeyc Ru Astok Condition: • Very good (complete, well-maintained equipment) • Fully functional and ready for operation • Offered exactly as configured in the photos Applications: • Maintenance (mechanical, electrical, energy sector) • Manufacturing industry, automotive • Inspection of machinery, installations, ducts, enclosures • Technical service and diagnostics

Condition: excellent (used), CTS Model: CTS CW+40/7/7 Walk-In Climate Chamber CTS Walk-In Climate Chamber 7 m³ Temperature & Humidity Testing 40–90°C Description: For sale is a walk-in climate-temperature test cell, CTS CW+40/7/7, industrial design. This system is used to simulate defined temperature and climate conditions for testing materials, assemblies, and technical systems under realistic environmental conditions. Temperature and humidity can be precisely controlled, and both constant and programmed test cycles are possible. High air circulation ensures uniform climate distribution throughout the entire test area. The walk-in construction enables testing of large components or complete systems. Technical data: Manufacturer: CTS – Clima Temperatur Systeme Hnedpsylmamjfx Abtjk Model: CW+40/7/7 Serial number: 113011 Year of manufacture: 06 / 2011 Design: Walk-in climate test cell Test volume: 2 × 7 m³ Electrical data: Power supply: 400 V / 3N / 50 Hz Rated power: 29.6 kW Rated current: 45.8 A Climatic data: Temperature range: +40 °C to +90 °C Humidity range: 10 % to 90 % RH Dew point range: +30 °C to +87 °C Protection rating: IP44 Internal dimensions: Width: 1400 mm, Depth: 1300 mm, Height: 2250 mm Overall external dimensions: Width: 3511 mm, Depth: 2765 mm, Height: approx. 2515 mm (overall) Additional technical data: Sound pressure level: 56 dB(A) Cooling: Water-cooled Heating: Stainless steel heating elements Internal chamber: Stainless steel Exterior: Coated steel panels (RAL 9010) Air circulation: Radial fan Control: 32-bit controller with LCD Interfaces: RS-232 / RS-485 Program and cycle mode available Safety temperature limiter & emergency stop available Refrigerant: R404A Weight: approx. 2000 kg Condition: used Scope of delivery: (see image) (Specifications subject to change and error!) We are happy to answer further questions by phone.

Condition: used, Rohde & Schwarz EMI Test Receiver Model: ESPI3 Frequency range: 9 kHz to 3 GHz IF Resolution Bandwidths (RBW): 200 Hz (CISPR), 9 kHz (CISPR), 120 kHz (CISPR), 1 MHz, as well as 10 Hz to 10 MHz in 1-3-10 steps CISPR Bandwidths: < 150 kHz = 200 Hz, 150 kHz–30 MHz = 9 kHz, > 30 MHz = 120 kHz Detectors: Max Peak, Min Peak, Quasi-Peak (CISPR 16), Average, RMS Up to 3 detectors can be activated simultaneously Input Attenuation: 0 dB to 70 dB in 10 dB steps Optional Pre-amplifier ESPI-B2: 9 kHz to 3 GHz, 20 dB gain Noise Figure: approx. 18 dB without pre-amplifier, approx. 10 dB with pre-amplifier User-adjustable start and stop frequency Step size can match reception frequency (harmonic measurement) Hjdpfxjyli A Do Abtenk Display units: dBm, dBµV, dBµA, dBpW, dBpT Measurement functions: EMI as per CISPR, APD, CCDF, continuous and single measurement Weight: 1 kg Condition: Used Scope of delivery: (See picture) (Subject to modifications and errors in technical data. All information is without guarantee!) Please feel free to contact us by phone for further questions.

Condition: used, functionality: fully functional, overall weight: 50 kg, Offered is a mechanical Rockwell hardness tester for HRC measurements. The device comes from our quality assurance inventory and has been regularly maintained. The last documented calibration was performed by a specialist company in May 2020. Since then, the device has not been in productive use. This tester is ideally suited for workshops, toolmaking, or maintenance departments looking for a robust and reliable hardness testing solution. Technical Specifications: - Test method: Rockwell (HRC) - Mechanical force application - Selectable test force levels (see nameplate) - Heavy-duty construction - Stable test table with fine-thread spindle Hedpfx Aeyw Hzisbtenk - Analog display Condition: - Used - Good visual condition - Complete - Last calibration: 05/2020 - Currently without valid calibration certificate Business Note: Mechanical Rockwell testers of this design are extremely durable and require minimal maintenance. The price offered enables an economical entry into hardness testing – significantly below the cost of modern new equipment. Location: Eisenach Collection preferred (high weight), loading by arrangement possible. Sale is made excluding any warranty or liability for material defects. The device is sold as seen.

Condition: good (used), Keyence RB-1200 3D Bin-Picking Robot Vision System with Camera Unit and Controller Manufacturer: Keyence Model: RB-1200 Type: 3D Bin-Picking Vision System for Robots System: Industrial image processing system for automatic part recognition Camera Unit: Keyence RB-1200 Vision Sensor Hnsdoyrun Eepfx Abtok Components: Camera unit, vision controller, mounting frame with four sensor modules Function: 3D detection and position determination of unordered parts in containers Application: Automated picking and removal of parts by industrial robots Connections: Industrial communication interfaces on the controller Scope of delivery: Camera unit, controller, sensor mounting frame, connection cables Condition: Good Location: Fulda

Condition: excellent (used), Passameter Manufacturer: Zeiss Hnsdpjylkkvefx Abtok (108150) Measuring range: 75 - 100 mm Complete with 2 center stops and pin spanner

Condition: excellent (used), Gauge block connectors and universal holders System KOBA Z 101 Hommelwerke as a set in case (108149) Hodpfjylkdpsx Abtsnk

Condition: good (used), For sale: PWB Swiss measuring device, model TOOL MASTER 310 Very good condition, complete, ready for operation Package includes: • TMA 21 control panel • LED displays • Dial gauge • Measuring socket for holders Features: • X and Z axis measurement • Tool setting and calibration for CNC tools Hodpfjw Humljx Abtenk • Easy operation • Length and diameter measurement Original user manual included Brand: PWB Swiss Model: Tool Master 310

Condition: used, Year of construction: 2000, functionality: fully functional, type of input current: DC, input voltage: 12 V, measuring range X-axis: 200 mm, measuring range Z-axis: 350 mm, travel distance X-axis: 200 mm, travel distance Z-axis: 350 mm, input frequency: 50 Hz, Toolset 350 Tool Presetting Device in used, functional condition. Compact and precise measuring machine for the presetting and measurement of CNC tools. The machine features an optical measuring system with camera and digital display, enabling accurate tool measurement. Measurement is performed over the X and Z axes using digital measuring systems. The measuring range is approximately 200 mm on the X-axis and approximately 350 mm on the Z-axis. The measuring accuracy is about 0.005 mm, allowing for precise results in workshop and production environments. The machine is equipped with an ISO40 tool holder (interchangeable), making it ideal for use in CNC manufacturing, toolmaking, and metalworking applications. Electrical connection: 12 V DC Hsdpfx Asyw Sf Tjbtonk Frequency: 50 / 60 Hz Features: • Optical camera system • Digital display with control panel • Reference holder for tool adapters • Interfaces for data transfer Areas of application: • Tool presetting for CNC machines • Tool measurement • Mechanical engineering • Metalworking Inspection by appointment possible. Sale as inspected.

Condition: good (used), In good technical condition and fully functional. (Like new) Type: Crysta Plus M544 Hnedpfx Abswi H S Ejtsk Manufacturer: Mitutoyo MCOSMOS manual version V4.

Condition: used, functionality: fully functional, measuring range X-axis: 510 mm, measuring range Y-axis: 410 mm, total height: 2,150 mm, total width: 1,100 mm, total length: 980 mm, travel distance X-axis: 510 mm, travel distance Y-axis: 410 mm, travel distance Z-axis: 340 mm, overall weight: 1,000 kg, input voltage: 400 V, table width: 650 mm, table length: 890 mm, DEA SWIFT coordinate measuring machine (CMM) in used, fully functional condition. Robust bridge-type coordinate measuring machine with granite measuring plate, ideal for precise 3D measuring tasks in industry and quality assurance. The machine offers a measuring range of approximately 510 x 410 x 340 mm (X/Y/Z) and is equipped with a touch probe system. Measuring accuracy is approximately 2.5–3.5 µm, enabling high-precision measurement of workpieces and components. The stable granite measuring plate (approx. 890 x 650 mm) and bridge construction ensure high rigidity and repeatability. The air-bearing guides provide smooth and precise movement. Machine dimensions: approx. 980 x 1100 x 2150 mm Machine weight: approx. 1000 kg Fields of application: • Quality assurance Hnsdpoyw R U Tofx Abtjk • Toolmaking • Mechanical engineering • Metalworking The machine is immediately ready for operation and ideally suited for precise measuring tasks in industrial applications. Inspection possible by appointment.

Condition: good (used), Filter testing, filter test system, filter measurement system, filter test system, particle counter, dust particle counter Hnsdoyk Dipopfx Abtok -Particle counter: Laser Particle Count -Type: CLJ-E -Number: 2 particle counters available -Price: per piece -Dimensions: 280/205/H135 mm -Weight: 2.4 kg/pc.