Year of construction: 1999, Condition: not inspected (used), For sale is a built-in salt spray chamber/corrosion test chamber from Weiss Technik, type: SC/KWT 450 The system must be cleaned and serviced before use. The system can be inspected on site, shipping is possible. Manufacturer Weiss Technik B2misngk99 Type: SC/KWT 450 Test chamber capacity: 480 l Max. load: 100 kg Brine storage tank: 180 l Corrosion tests: Salt spray test: Room temp. up to +50 °C Babumc3umw Condensation water test: Room temp. up to +45 °C Voltage: AC 230V Salt spray test SS: DIN 50021 Condensation water test KFW: DIN 50017 Normal climate (ventilation): DIN 50014 Co Iaewbai Ue Ttiujgt

Condition: excellent (used), Functionality: fully functional, Year of construction: 2012, Fitotron® Modular Plant Growth Chambers, Type HGC 1014 V, including HQI-T and Krypton Lighting Module Temperature range +5°C - +45°C for temperature testing Test chamber volume approx. 1300 l Simpac Control System Network Connection USB Connection The Fitotron® HGC series plant growth chambers are based on a modular design. Individual modules can be added or replaced as needed. This allows them to be adapted to different applications. They are suitable for plants with high light requirements, such as wheat, corn, cotton, rice, and C4 plants. Lighting HQI-BT-400 W/D and 100 W, Temperature range +5°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Fresh air up to 7.5 m³/h Power consumption without fresh air operation at 25°C / 75% RH approx. 0.8 kW Characteristics for climatic tests with irradiation Temperature range +10°C to +45°C with light on +10°C to +45°C Temperature deviation over time ± 0.5 K Humidity range 40% to 95% Dew point range +4°C to +35°C Humidity deviation over time ± 3 to 5% RH Humidification and dehumidification system, stainless steel test chamber Internal dimensions: Height 1400 mm, Depth 750 mm, Width 1270 mm External dimensions: Height 1985 mm, Depth 980 mm, Width 2320 mm External dimensions with lighting module: Height 2450 mm Single door with observation window Cs Ia Tevz U Erstiusgt Interface for computer connection Connection 3/N/PE 400V ±10% 50Hz CE marking, mobile, very good condition Pipe penetration ∅ 50 mm Air cooling Refrigerant R404A Weight approx. 480 kg + 130 kg lighting module

Year of construction: 2017, Condition: good (used), - Standard deviations: 0.01 g/l - In good condition Co Ia Ttiswff A Iousgt

Condition: reconditioned (used), Year of construction: 2025, operating hours: 12 h, Functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, feed length X-axis: 400 mm, feed length Y-axis: 400 mm, feed length Z-axis: 200 mm, year of last overhaul: 2025, Equipment: documentation/manual, lighting, type plate available, Mahr Multiscope 442 multi-sensor measuring device equipped with camera, laser and Renishaw probe system and the Hexagon Vision 3D software Factory overhauled premium multisensor measuring center with guarantee and warranty rebuilt 2024. Delivery with factory service or forwarding agency, worldwide. Online, optionally on-site demos with customer parts, application technology advice from accredited Profitech measurement laboratories during project planning. Complete service: – Delivery, construction, commissioning, accuracy acceptance according to standard, certification and extensive acceptance documentation. Individual education and training programs can also be booked as online courses. Rent-hire-purchase or financing possible directly via Profitech and without a financial institution. Measuring device individually configurable to customer needs Measuring range of all sensors: 400x400x200mm Dimensions: 800x1000x2000mm Weight: about 800kg max. loading weight: glass plate 30kg Accuracy: U1=1.9 + L/200; U2=2.4 + L/150; U3=2.9 + L/100 (L= measuring length in mm) max. travel speed: 250mm/s including camera incl. turntable including lasers including LED ring light including a new frame grabber including 2-monitor operation incl. CNC control and PC including Hexagon Vision3D software Cge Ijiu Hfvea Ttiust

Condition: excellent (used), Year of construction: 2018, Functionality: fully functional, overall weight: 7 kg, Equipment: documentation/manual, ATOS 3D scanner consisting of: - Stereo system with 2 cameras - 8 million pps (points per scan) - Two-shell cast housing with encapsulated electronics and external cooling - Removable front panel for easy lens changes - Fast warm-up time - LED illumination - Laser pointer for distance adjustment - Weight approx. 7 kg - Dimensions approx. 310 mm x 220 mm x 150 mm - 10 m cable - Carrying case Measurement fields: - 200 x 140 m² Cgs Ia Ttswaywcjiuet - 70 x 50 mm² GOM probe including probe tip and calibration board: - GOM probe PM 1.5 (point mark size 1.5 mm, M2 thread) Image processing computer 7820 - Workstation: - 64-bit Intel Xeon 2 x 3.0 GHz 12-core CPU - 128 GB RAM - NVIDIA Quadro OpenGL graphics card - 24" TFT monitor - 1 TB SSD hard drive - External USB system backup hard drive for incremental backups - Image processing card - I/O: LAN, USB 2.0 / 3.0 - Windows 10 (64-bit) operating system Motorization kit for ATOS: - Automatic turntable on the rotation and tilt unit - Plate diameters: 300 mm and 200 mm with threaded holes - 5 kg maximum load - Tilt axis: Tiltable up to +/- 115° - 360° rotation axis - Maximum rotation unit speed: 60°/s - Maximum tilt unit speed: 30°/s - Motorized vertical axis for sensor positioning - Maximum vertical axis speed: 30 mm/s - Emergency stop switch - 3-axis control unit in 19" format - Stable Table with 750 mm x 750 mm perforated plate - Joystick control - ATOS software control - Motion replay function in the software for recurring measurement and calibration processes ATOS Professional Software/Zeiss Inspect 2025 Inspect Optical 3D License - Setup and calibration - Measurement data acquisition and project management - Polygon mesh processing - Element construction - Alignment - Inspection - Stage management with timeline - Digital assembly - Report module - Process automation with GOM Parametik - Live software module Reference frames: - 50 mm x 50 mm; 0.4 mm uncoded white single-point markers - 150 mm x 90 mm; 0.8 mm uncoded white single-point markers

Year of construction: 2012, Condition: ready for operation (used), Functionality: fully functional, Feutron climate chamber Type: 3703/13 Hum: 70% Year of construction 2012 See more information in the attachments Cge Ia Ttsvwm Nusiujt Door is damaged (paint damage)

Condition: used, Year of construction: 2011, In our opinion, the machine is in good used condition and can be inspected Co Iasvdudmj Ttiusgt under power by appointment. Accessories, tools and clamping devices shown are only included in the scope of delivery if this is noted in the additional information. Subject to changes and errors in the technical data and information as well as prior sale!

Condition: reconditioned (used), Year of construction: 2011, Functionality: fully functional, measuring range X-axis: 300 mm, measuring range Y-axis: 200 mm, measuring range Z-axis: 150 mm, workpiece weight (max.): 16 kg, warranty duration: 3 months, total height: 1,500 mm, type of input current: AC, total width: 800 mm, total length: 850 mm, travel distance X-axis: 300 mm, travel distance Y-axis: 200 mm, travel distance Z-axis: 150 mm, overall weight: 77 kg, input voltage: 230 V, year of last overhaul: 2023, ambient temperature (max.): 30 °C, Equipment: documentation/manual, type plate available, CNC-controlled measuring machine for automatic, optical-tactile Cs Ia Ttjq T R Rhoiujgt measurements with camera and 3D with probe. Interchangeable bench and 2 SF modules are included. PC-DMIS CAD V13 with Step/Dxf programming possible.

Condition: excellent (used), Year of construction: 1985, WENZEL LS 89091 3D measuring machine. -Year of manufacture 1985 -Moving distances (XxYxZ): 1500x600x600 mm. -RENISHAW PH9A measuring probe. Cs Iaoud At Ds Ttiujgt -WENZEL control cabinet. -FUJITSU computer.

Condition: reconditioned (used), Year of construction: 2024, operating hours: 16 h, Functionality: fully functional, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 300 mm, warranty duration: 12 months, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 300 mm, input voltage: 230 V, year of last overhaul: 2024, Equipment: documentation/manual, lighting, type plate available, On behalf of the customer: 3D coordinate measuring machine Hexagon Optiv443 used multi-sensor CMM with camera, probe Complete acceptance before delivery including calibration certificate! Optionally available services: delivery, commissioning, on-site calibration, training, program creation for immediate start of measurements! Ce Ia Tsd Ah Nxotiuegt • Measuring range of individual sensor: 400x400x300mm • Dimensions: 1232x910x1663mm • Weight: approx. 940kg • Max. workpiece weight: glass plate approx. 30kg Mufjyo • Accuracy: MPEE = 2.9 + L/100 [?m] • Year of manufacture 2014 • Software: Vision3D with option for Opticheck3D • Incl. camera with CNC zoom • Incl. 6-way probe changer • Incl. switching probe HP-TM • Incl. LED ring light • Incl. calibration standard • Incl. 2-monitor operation • Incl. new Windows 10 Professional evaluation station • Incl. Opticheck3D 4.5 evaluation software (12 months free software update) SYMBOL IMAGE (sister machine)

Condition: excellent (used), Year of construction: 2008, machine/vehicle number: 0824715, Measuring arm Measuring range (X/Y/Z): 1200 mm Incl. trolley and accessories Cge Ia Tjqgdkqjtiuot Excl. computer and software

Condition: refurbished (used), Repair and replacement service for all Heidenhain measuring systems: LS 803, LS 903, LS 303, LS 403, LS 501, LS 503, LS 603, LS 703, LS 106, LS 186, LS 706 LB 325, LB 326, LB 301, LB 381, LB 382 LC 481, LC 483, LC 485, LC 181, LC 183, LC 185 Many measuring systems are also available as exchanges and immediately available. Ce Ia Teq Sahnetiuogt Please inquire about your type.

Condition: excellent (used), We are offering an LPKF ProtoLaser S PCB laser system complete with an LPKF Multipress S multilayer press and a Walter Lemmen RBM 300 brush system with filter. Ideal for prototypes Technical specifications: LPKF ProtoLaser S Max. layout area: 229 x 305 x 10 mm Structuring speed: 6 cm²/min a Beam diameter at focus: 25 µm a Minimal track/pitch: 50 µm/25 µm b Scan field resolution: 2 µm Repeatability: ± 2 µm c Laser pulse frequency: 10–100 kHz Machine dimensions (W x H x D): 875 x 1,430 x 750 mm d Machine weight: 260 kg Operating environment: Technical specifications Power supply: 110/230 V, 50–60 Hz Hz, 1.4 kW Compressed air supply: 8 bar (116 psi), 160 l/min (3.5 cfm) Cooling: Air-cooled (internal cooling circuit) Ambient temperature: 22 ± 2 °C (68 °F ± 4 °F) Required accessories: Extraction system, air compressor LPKF MultiPress S The LPKF MultiPress S presses multilayer circuits made of rigid, rigid-flexible, and flexible PCB materials. Uniform pressure distribution across the entire pressing surface with temperature- and pressure-precise process control ensures a homogeneous material bond. Special process profiles ensure a reliable bond of high-frequency materials. Efficient heat dissipation guarantees short cooling phases. The result is optimal process times. Technical specifications: LPKF MultiPress S (1 with automatic hydraulics) Item no. 120734 / 120736 1 Max. layout size 200 mm x 275 mm Max. pressing area 229 mm x 305 mm Max. pressing pressure 286 N/cm² at 229 x 305 mm Max. temperature 250 °C Max. number of layers 8 (depending on material and layout) Process duration approx. 90 min a Dimensions (W x H x D) 600 mm x 620 mm x 530 mm Weight 170 kg b Power supply 230 V, 50/60 Hz, 2.3 kW/2.8 kW 1 Microprocessor controlled 9 pressure/temperature/time profiles Dimensions of hydraulic unit (W x H x D) 260 mm x 410 mm x 280 mm 100 mm x 150 mm x 700 mm 1 Weight of hydraulic unit: 15 kg, 5 kg Walter Lemmen RBM 300 brushing system with filter RBM 300 brushing machine The standard RBM 300 brushing machine (tabletop model) is used for deburring and cleaning drilled circuit boards, fine grinding before photo-processing, and cleaning sheet metal. The board material is brushed on one side at a high oscillation frequency. The oscillation and feed speed are continuously adjustable. The brush distance from the board is automatically adjustable. Special filter systems are available to remove copper abrasion from the rinse water. The easy brush change allows the use of a wide variety of brush types. After the wet process, a squeezing and warm-air drying station ensures a clean surface. Dimensions [W x H x D] 760 x 590 x 415 mm Working width 300 mm Material thickness (rigid) 0.33 mm Co Ia Tev Um Ufotiuegt Plate size (minimum) 80 x 160 mm Oscillation stroke 10 mm Brush speed 10 mm

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, Functionality: fully functional, machine/vehicle number: CC5741150004, year of last overhaul: 2025, warranty duration: 12 months, The PROFITEST PRIME AC makes your investment decision easy. Because with the accessories perfectly tailored to your requirements, electrical systems according to DIN VDE 0100-600, machines and systems according to VDE 0113-1, low-voltage switchgear assemblies according to VDE 0660-600-1, PV systems according to VDE 0126-23 and e-charging stations according to VDE 0122-1 can be tested in accordance with the standards. This device has been used twice. It has been calibrated up to date (see attached photo) and checked by the manufacturer. Cgj Ia Tov Hw S Sotiujt

Condition: excellent (used), HOMMEL WERKE LV-50E roughness measuring device. Cgj Ia Ttovdybdsiuet

Condition: refurbished (used), Year of construction: 2025, operating hours: 20 h, Functionality: fully functional, measuring range X-axis: 600 mm, measuring range Y-axis: 600 mm, measuring range Z-axis: 350 mm, workpiece weight (max.): 25 kg, warranty duration: 12 months, travel distance X-axis: 600 mm, travel distance Y-axis: 600 mm, travel distance Z-axis: 350 mm, compressed air connection: 5 bar, Equipment: documentation/manual, lighting, type plate available, Factory-refurbished MAHR Multisensor OMS 600 CNC Includes acceptance certificate prior to delivery Technical Specifications: Dimensions: 1700x1420x1800 mm Weight: approx. 3300 kg Measuring range: approx. 600x600x350 mm Optical sensor: camera and laser Tactile sensor: prepared for Renishaw probing systems Max. workpiece weight on glass plate: max 50 kg Max. travel speed: 200 mm/s Measurement accuracy: E1 (E2) = 1.3 + L / 400 µm, E3 = 2.2 + L / 300 µm (L in mm) Compressed air supply: min. pressure 6 bar +/- 0.1 bar Compressed air consumption: approx. 120 Nl/min Power supply: 230V +/- 10% Includes: • CNC control Cj Ia Tedz Szvstiuogt • Calibration standard • Full version of OptiCheck3D 2024 software The measuring device was extensively factory-refurbished by Profitech (Mahr Competence Center) in 2024 and is used as a demo device. Additional services: Setup, commissioning, calibration, acceptance, training, hotline service, after-sales services, and comprehensive application support from our service center. The measuring device can also be customized according to your specific parts spectrum upon request and can be delivered with ready-to-use measurement programs for immediate operator access.

Year of construction: 2023, Condition: as good as new (ex-display), ECOPRESS 102 is an automatic hot mounting press with an electro-hydraulic pressure system and therefore does not require a separate compressed air connection. The working pressure reaches up to 300 bars and an embedding temperature up to max. 200°C. The mounting time can be set up to 60 minutes. The automatic process results in short cycle times: thermostatically controlled heating and cooling times, heating output of 1650 W, automatic cooling cycle. Mounting cylinders and pistons with diameters of 25, 30, 40, 50 mm (and inch) are available. The end of the embedding sequence is signaled acoustically by the device. The delivery is made ready for operation (incl. To be ordered separately Mounting cylinder with piston and intermediate piston for 2 mountings), required power supply: 230V / 50 Hz, 1 phase (220V), water inlet, water outlet, delivery included Test equipment consumables consisting of: • 5 x 1 kg (5 kg) different investment materials • 1650 watt heating power • up to 200 ° C embedding temperature • Embedding time adjustable up to 60 minutes • automatic cooling cycle • no compressed air required • 12 month warranty Delivery by forwarding agent to the factory in Germany Co Ia Tocwamxjtiuogt (Optional installation by our technicians on site)

Condition: like new (used), Year of construction: 2015, Functionality: fully functional, 575/5000 In the client's order: Used equipment Hexagon Optiv 321 GL Measuring range single sensor: 300x200x150mm Dimensions: 890x705x150mm Weight: about 170kg Accuracy tactile: Ex, Ey (2.0 + L / 250) um Optical accuracy: Ey, Ey (1.6 + L / 250)? M Refit 2017 Cj Ia Todyfpzotiuegt incl. index turntable incl. digital CCD color camera with 6.5-fold CNC motor zoom including switching button HP-TM incl. LED ring light including calibration standard including 2-monitor operation incl. new Windows 7 Ultimate evaluation station incl. OptiCheck 3D 4.5 evaluation software (12 months free software update) +++ Icon of the manufacturer +++

Year of construction: 2021, Condition: new, Low-priced quality hardness tester for the Rockwell C , B , A methods Analogue dial indicator, manual operation, weight loading system, conform to ISO6506, warranty 2 years Rockwell scales: A, B, C, D, E, F, G, H, K, L, M, P, R, S, V Test loads: preload 10kgf, main loads 60 | 100 | 150 kgf Cgo Ia Ttiobt Drpeuot adjustable hydraulic damping of the weight loading system Adjustable dial indicator, graduation 0.5 HR - Readability 0.1 HR Units Throat 150 mm Test chamber height 240 mm Standard-compliant Rockwell tests according to EN-ISO 6508, ASTM E-18 Machine weight (net) 126 kg Machine dimensions height 765 mm / width 270 mm / depth 555 mm

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 22 h, Functionality: fully functional, machine/vehicle number: 00192168, measuring range X-axis: 800 mm, measuring range Y-axis: 800 mm, measuring range Z-axis: 500 mm, workpiece weight (max.): 100 kg, warranty duration: 12 months, input voltage: 230 V, compressed air connection: 5 bar, Equipment: documentation/manual, lighting, type plate available, High-precision reference measurement center with extended measurement range in the Z-axis. Highlights: - Factory overhaul in 01/2024 with warranty and guarantee - Live demo (available online or offline) - Optional services in the package: (Worldwide transport, commissioning, calibration/certification, training, user training) - 18 months of free software update service - 18 months of free software hotline service - Activation of the full license (OptiCheck3D) WITHOUT subscription model -> purchase license - Online remote on-board (online service on your measuring device) - Custom upgrades and retrofits upon request (the measuring device can be customized according to customer requirements) - Latest 64-bit CNC controller and evaluation station WIN10 and later Cge Ia Ttiedykhtjujt Measuring device from laboratory use in precision measurement room, factory overhauled/refurbished in 2024 after extensive retrofitting/modernization Current new price for comparable devices: from approx. 650,000 Euros Delivery time from order confirmation: approx. 4 weeks High-precision air-bearing multi-sensor coordinate measurement center Mahr OMS 800 / 500 HA with active BILZ vibration damping Technical Data: 3D multi-sensor measuring device MarVision OMS 800/500 HA CNC Measurement range: approx. 800x800x500mm Optical sensor: camera & laser (active measuring) Includes Renishaw TP200 probing system (other possible options available: TP20, SP25...) Camera system includes 10x lens (optional; 1x; 5x; 20x) Includes active vibration damping (BILZ Bi Air) Includes monitor and keyboard New evaluation station Intel Core i9 (operating system Windows 10, alternatively Windows 11) New Opticheck 3D 5.0 measurement software (full license without subscription) Length measurement uncertainty: E1=0.9 + L / 600 µm, E3=1.9 + L / 400 µm (L in mm) Scale resolution: 0.1µm Weight: approx. 8090kg Max. workpiece weight on glass plate: 50kg, expandable Max. workpiece weight on granite: 100kg, expandable Dimensions: 2360x1940x3300mm Max. travel speed: 200mm/s Compressed air supply: Min. compressed air supply: 6 bar +/- 0.1bar, constantly filtered, according to ISO 8573 part 1, classification 4; consumption approx. 160Nl/min Power supply: Voltage: 115/230V +/- 10% Mains frequency: 50/60Hz +/- 5% Power consumption: 2500VA Environmental conditions: Max. allowable vibrations: < 5*10-3m/s², corresponding to an amplitude < 5µm with < 5Hz Humidity: 40%-70% RH Ambient temperature: 20°C +/-1°K Permissible temperature gradient: 0.8K/h; 0.5K/d; 0.6K/m Optical sensor: • 3D multi-sensor head MSH with camera system, transmitted light, reflected light, measuring laser, and probe holder Laser sensor: Laser preparation for laser autofocus. High-resolution laser probe for static measuring, software-based intensity control for adaptation to different materials. Accuracy according to E1 Average focus time 0.2s Software: • OptiCheck3D: user-friendly, interactive programming (full license without subscription) (live demo available)

Year of construction: 2023, operating hours: 1 h, Condition: as good as new (ex-display), The METACUT 302 is the best value quality wet cutting machine available on the market for abrasive cuts. The cutting process is purely manual by operating the hand lever on the right side. The type METACUT 302 is able to cut solid materials with a diameter up to 90 / 110 mm (round) or 65 x 130 (square). In order to enable the cutting of extremely long workpieces, a lateral opening was created on the left side of the machine. The machines are equipped with a powerful motor that drives the abrasive cutting wheel safely through the workpiece. The base assembly of the machine consists of large die-cast aluminum housing. The clamping table made of stainless steel is equipped with T-slots, which allows a multitude of different clamping's. The optional quick-clamping devices can be disassembled to allow the installation of conventional clamping tools and thus the clamping of large or irregular workpieces. After only a few cutting attempts, the user is able to make perfect cut-offs with this easy-to-operate wet cut-off grinding machine to create the best conditions for the following grinding and polishing work to be carried out efficiently. Keywords: Manual, abrasive wet cut-off machine, 4.6 kW compact motor, electronic brake system, cutting capacity for solid workpieces with Ø ᐸ 90 mm (110 mm with cut-off wheel Ø 300 mm), for cut-off wheels with a Ø up to 250 / 300 mm, double T-slot table, floor assembly made of solid die-cast aluminum, powder-coated machine body, GRP plastic protective housing, 80 litre circulation cooling system with tank and pump included in the basic price. Delivery ready for operation (options: clamping device, base cabinet) Delivery including a test equipment consumables consisting of: * Assortment of 20 cutting discs * 5 litres METCOOL coolant Ce Ia Tts Ebqnjiusgt Option: Machine base cabinet

Condition: good (used), Year of construction: 2011, measuring range X-axis: 400 mm, measuring range Y-axis: 400 mm, measuring range Z-axis: 200 mm, travel distance X-axis: 400 mm, travel distance Y-axis: 400 mm, travel distance Z-axis: 200 mm, input voltage: 230 V, Equipment: lighting, type plate available, Year of manufacture: 2011 Tactile: Vast XXT E0 X/Y (1D) in [μm] at 20 ±2 °C 1.7 + L/250 Cgj Iaouq Nfhj Ttiuot E0 XY (2D) in [μm] at 20 ±2 °C 1.7 + L/250 E0 (3D) in [μm] at 20 ±2 °C 1.9 + L/250 Scanning probing deviation MPE according to ISO 10360-4:2000 THP at 2.7 [μm] Single probe probing deviation form MPE according to ISO 10360-5:2010 PFTU 1.9 [μm] Camera system: Zeiss Discovery 12 EB X/Y (1D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 EB XY (2D) 5) in [μm] at 20 ±2 °C 1.7 + L/250 Probe deviation MPE according to ISO 10360-7:2011 PF2D 5) 1.7 [μm] Probe deviation of the image processing system MPE according to ISO 10360-7:2011 PFV2D 5) 1.2 [μm] Possible services: delivery, commissioning

Year of construction: 2023, Condition: as good as new (ex-display), With 250 mm diameter of grinding wheel - new equipment / demo unit for special price - this machine is a standard machine for manual preparation - optional we offer a specimen mover – please ask for details Machine ready for use: - basic machine disc diameter 250 mm - 250 mm platic grinding table - splash guard - disc cover - connections for cooling water & water drain Optinonal: grinding paper, diamond grinding discs, polishing cloth, diamont suspensions inclusiv delivery by forwarder (Germany) delivery outside Germany on request Cgj Ia Tsptc Detiust offer not binding - subject to prior sale

Year of construction: 1990, Condition: used, Universal hardness testing machine high-quality general overhaul with guarantee Cgs Ia Ttieptcysuot optionally with modernization for Vickers / Brinell / Rockwell with PC connection

Year of construction: 2023, Condition: as good as new (ex-display), Impact tester with motoric hammer lifting and protection housing - ready equipet for testing according CHARPY ISO148 (EN10045) - Demo-Machine (as new) Cge Ia Tjptcwotiuet - potential energy: 300 Joule - alternate models: 150 / 300 / 450 / 600 / 750 J. - warrenty period 24 month - see also the photos of optinonal items