Used milling machines - vertical for sale (76)

Condition: used, The machines are in good condition. Dodpfx Afextflcjljwf

Condition: used, Technical details: x-travel: 762 mm y-travel: 382 mm z-travel: 419 mm table surface area: 1070 x 230 mm spindle taper: Iso 40 weight of the machine ca.: 1600 kg This machine is currently in the technical department. Dsdpeva Evfefx Afljwf *

Condition: good (used), Year of construction: 2005, travel distance X-axis: 560 mm, travel distance Y-axis: 320 mm, travel distance Z-axis: 400 mm, feed rate X-axis: 2,400 m/min, feed rate Y-axis: 2,400 m/min, feed rate Z-axis: 2,400 m/min, table width: 450 mm, table length: 950 mm, Fixed table 950 x 450 mm Feeds all direction ISO-40 and 3kW 3 Axis Digital Read Out Systsem CE-Safety  Coolant system with semi closed lower base  X-Axis: 560mm Y-Axis: 320mm Z-Axis: 400mm Table Length: 950mm Table Width: 450mm Table load: 350 Spindle speeds: 2240Rpm Feed rate X-Axis:2400mm/min. Feed rate Y-Axis:2400mm/min. Feed rate Z-Axis:2400mm/min. Stroke pinole: 0 - 95mm Length: 1800mm Width: 1600mm Height: 1900mm Weight: 1700kg Dodpexdltbjfx Aflswf Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: excellent (used), Year of construction: 1999, functionality: fully functional, travel distance X-axis: 4,500 mm, travel distance Y-axis: 2,500 mm, travel distance Z-axis: 1,500 mm, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 20 m/min, spindle speed (max.): 7,500 rpm, table width: 2,500 mm, table length: 5,000 mm, table load: 25,000 kg, Droop & Rein FOGS very good condition -Complete overhaul retrofit by manufacturer in 2014 -Continuous maintenance and renewal of components until today -Heidenhain ITNC 530 control system -Machine can be inspected under power -Spindle Weiss GmbH 1 HSK 100 spindle hours 14267 -Spindle Weiss GnbH 2 HSK 100 spindle hours 10559 -Spindle 3 Weiss GmbH HSK 50 spindle hours 6788 -Chip conveyor 2x lengthwise -tool changer -Blum Laser Dwedpfeuhqmyex Afljf -Camera 3-fold controllable -set-up BA4 -Radio handwheel -C-axis endless -A-axis +-115 degrees -Special housing

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, travel distance X-axis: 838 mm, travel distance Y-axis: 305 mm, travel distance Z-axis: 406 mm, spindle speed (min.): 50 rpm, quill travel distance: 127 mm, table width: 299 mm, table length: 1,245 mm, overall weight: 1,000 kg, input voltage: 400 V, warranty duration: 6 months, Rebuilt Bridgeport Milling Machine 2HP Variable Speed Fully Rebuilt Head And Machine Table has been reground on 3 Sides Bed ways have been reground and re scrapped in Brand New Lead Screws imperial X & Y & Z New Lead screw bushes imperial X, Y & Z Table Size 42” X 9” 50-4200rpm Brand New X Axis Powered Traverse Brand New Y Axis Powered Traverse Brand New 2 Axis Digital Readout ( X & Y Axis ) Brand New Coolant Pump & System Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Dwsdpsw Id U Hjfx Aflsf Reground R8 Spindle Taper Coolant Tray Power - 3 Phase 400v (original wiring & Motor Pre CE) Comes with a techno piu machine safety guard fitted as shown in the photo which is interlocked Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new shafts, new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: good (used), Metal milling machine with some cutters included X-axis approx. 800 mm Y-axis max. approx. 300 mm Z-axis ? Still a heavy, stable cast iron machine Dwodsxvll Ispfx Aflof

Year of construction: 1983, condition: good (used), Machine number: 316204/22 Type / Model: FSS 315/E Travel x-y-z: 850 - 280 - 355 mm table: 1.200 x 370 mm clamping surface: 1.060 x 260 mm Speed range: 28 to 1,400 rpm spindle mount: SK 50 quill stroke: 80 mm Feed rates x and y axis 16 to 800 mm/min feed z-axis: 5 to 250 mm/min Connection: 8 kW Accessories/equipment: Swivel head; Dwsdpsfli Afefx Aflof condition: good Weight: 4 t Dimensions: 2.000 x 2.000 x 2.400 mm

Condition: used, Year of construction: 1991, Technical details: x-travel: 1050 mm y-travel: 600 mm z-travel: 650 mm range of revolution per miute: 40 - 1720 / 12 step U/min spindle taper: SK 50 spindle head swivable left - right: 90° re/li und 45° = 360° ° distance spindle nose and table: 0 - 600 mm table surface area: 1700 x 470 mm feed continuous: X/Y= 15 - 625 + Z= 7,5 - 312 mm rapid traverse Z-axis: 1250 mm/min. rapid traverse:: X/Y: 2500 mm/min. Dwodeva Hd Rspfx Aflef total power requirement: 11,1 kW weight of the machine ca.: 2500 kg machine dimensions LxWxH: ca. 2,45 x 2,0 x 2,85 m Equipment: with Huron universal milling head coolant system control panel machine feet Accessories Machine vice (jaw width 120mm) *

Condition: ready for operation (used), Year of construction: 2015, functionality: fully functional, travel distance X-axis: 355 mm, travel distance Y-axis: 190 mm, travel distance Z-axis: 245 mm, spindle speed (max.): 3,000 rpm, table width: 180 mm, table length: 530 mm, TECHNICAL DETAILS Dedow Tzkiopfx Afljwf Number of axes: 3 X-axis travel: 355 mm Y-axis travel: 190 mm Z-axis travel: 245 mm Max. spindle speed: 3,000 rpm Interface: BT30 Table size (length): 530 mm Table size (width): 180 mm Max. workpiece weight: 30 kg Control type: Siemens 808D Control system: CNC Motor power: 1.5 kW MACHINE DETAILS Dimensions (L x W x H): 1,400 x 1,380 x 2,000 mm Transport weight: 1,400 kg Number of transport packages: 1 Documentation available: Yes CE marking: Yes EQUIPMENT - Siemens 808D control - CNC controlled - Documentation available - CE marking - Large vise - Indexing head - Precision vise - 19 BT30 tapers - ER32 and ER25 collet sets - CamBamPro with license (drawing/programming) and postprocessor configured for Siemens - Complete technical documentation

Condition: used, Year of construction: 2012, Milling machines Travel distance X: 635 mm Travel distance Y :510 mm Travel distance Z: 460 mm HSC-machines Number of axis: 3 milling machine / machining center Control: Heidenhain TNC 530 spindle chuck: SK 40 spindle revolutions: 18000 rpm Dwsdpfxjv Tx Twe Aflsf table size X: 790 mm table size Y: 560 mm max. workpiece weight: 600 kg tool changer: 60 - time input Power : 13 kW spindle cooling chip conveyor incl. pallet changer incl. measuring probe

Condition: refurbished (used), Year of construction: 1996, Bridgeport Milling Machine 2HP Variable Speed Rebuilt Machine Table has been reground on 3 Sides Excellent Condition Chrome Bed ways Ball Screw Leadscrews X & Y Axis Table Size 48” X 9” Spindle Speeds 50-4200rpm Brand New X Axis Powered Traverse Dwodsgvqkuspfx Afljf Brand New 3 Axis Digital Readout ( X & Y & Quill Axis ) Brand New Coolant Pump Brand New LED Worklight Hand Pump Lubricated Ways ( Re piped) Reground R8 Spindle Taper Coolant Tray 3 Phase 400v Fully Serviced Ready For Work Head has been fully stripped down and rebuilt new bearings , belts & Super Precision Spindle Bearings Replaced Warranty Included

Condition: ready for operation (used), Year of construction: 2015, operating hours: 7,100 h, functionality: fully functional, travel distance X-axis: 1,270 mm, travel distance Y-axis: 508 mm, travel distance Z-axis: 635 mm, spindle speed (max.): 12,000 rpm, table load: 794 kg, TECHNICAL DETAILS Travel X: 1,270 mm Travel Y: 508 mm Travel Z: 635 mm Rapid traverse speed X/Y/Z: 35.6 m/min Distance spindle nose to table max.: 742 mm Distance spindle nose to table min.: 107 mm Max. spindle speed: 12,000 rpm Spindle drive power: 22.4 kW Table dimensions: 1,321 x 495 mm Max. table load: 794 kg Tool changer positions: 24+1 Max. tool weight: 5.4 kg Tool change time: 1.8 s MACHINE DETAILS Dimensions & Weight Dimensions (L x W x H): approx. 3,000 x 2,500 x 2,600 mm Weight: approx. 6,800 kg Cycle start time: approx. 10,100 h Feed time: approx. 7,100 h Dsdpfx Aextbtisflowf EQUIPMENT Haas control with synchronous tapping Wireless probing system Coolant system with programmable coolant nozzle Spiral chip conveyor

Condition: good (used), Hello, For sale: Vertical milling machine FSS-315x1250. Dsdpfx Afoxykarjljwf The machine is fully operational and in continuous use, available for inspection. The price listed in the advertisement is net; VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Phone contact available from 7:00 to 16:00.

Condition: used, Year of construction: 1995, Technical details: Dwsdpeu Ndfusfx Aflef x-travel: 500 mm y-travel: 200 mm z-travel: 300 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 45 ° range of revolution per miute: 45...2000 U/min headstock: dist. table - spindle center: max. 300 mm distance spindle nose and table: max. 300 mm feed:: 16...800 / 18 step mm/min table surface area: 1000 x 165 mm table swivelling to both sides: ja Grad control voltage: 380 V total power requirement: 4,6 kW machine weight approx.: 1540 kg dimension machine xH: 1,5 x 1,5 x 1,6 m The milling beam is slide adjustable with 580mm. Throat min. / max. 250/800mm *

Condition: ready for operation (used), machine supplied with accessories and Selca S3045 control. For more information please contact us. Dwodpfx Asw D Hwqsflof

Year of construction: 1972, condition: excellent (used), machine/vehicle number: 2995, table mounting size: 300 x 1100 mm movement x: 780 mm movement y: 250 mm movement z: 410 mm spindle taper: SK 40 Dwjdpfxeh I Du Us Aflef tailstock stroke: 100 mm spindle turning speed range: 31,5 - 1400 rpm carriages longitudinal and cross: 12,5 - 630 mm/min carriages vertical: 6,3 - 315 mm/min electrical connection: 380 V, 5,5 kW space needed: 1770 x 1500 x 2050 mm weight: ca. 2200 kg

Condition: good (used), Year of construction: 2001, feed length X-axis: 600 mm, feed length Y-axis: 400 mm, feed length Z-axis: 400 mm, CNC milling machine KUNZMANN - WF7/3 Dwsdpfxowq Ndgj Afljf X-Axis: 600mm Y-Axis: 400mm Z-Axis: 400mm Table Length:650mm Table Width: 400mm Table load: 250 Stroke pinole:40mm Length: 2800mm Width: 2400mm Height: 2100mm Weight: 2000kg

Condition: repair required (used), functionality: not functional, Vertical milling machine Dodpjumlvuofx Aflewf

Condition: good (used), Hello, For sale: Vertical milling machine FSS-400/1600. The machine is operational, in continuous use, and available for inspection. The listed price is net; VAT must be added. The machine can be viewed in Starachowice at 13 Kwiatkowskiego Street. Telephone contact available from 7:00 to 16:00. Dsdpfx Afexyi U Ioljwf

Condition: used, Year of construction: 1989, Technical details: x-travel: 300 mm y-travel: 300 mm z-travel: 400 mm control: Contour 3 Bahnsteuerung spindle taper ISO: SK 40 spindle head swivable left - right: 90 ° quill travel: 60 mm range of revolution per miute: 40 - 4000 / 21 step U/min Dwjdpfju Nc Twox Afljf feed:: 2 - 3600 mm/min rapid traverse : 4000 mm/min Table dimensions: 620 x 390 mm clamping table: Winkeltisch mm table load: 0,45 t total power requirement: 12,5 kVA machine weight approx.: 1400 kg dimension machine xH: 1,5 x 2,1 x 2,0 m dimensions electric cabinet: 1,8 x 0,8 x 1,1 m Operation via control panel Grundig electronic with extension arm equipment: - cooling with pump - manual-control unit with steering wheel - machine illumination Machine can be demonstrated under power. *

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, The machine tool undergone a general overhaul, which included the repair of the mechanical part, the electrical part and the derivation of the geometry in accordance with the Technical Acceptance Conditions (WOT) and EN. The machine is adapted to the minimum requirements for occupational health and safety requirements. Basic technical data: table working area: 400x1600 mm Dwjdpfjurvl Rox Aflef spindle taper: ISO 50 longitudinal travel: manual/mechanical 1150/1120 mm cross travel: manual/mechanical 370/345 mm vertical travel: manual/mechanical 430/400 mm maximum angle of rotation of the vertical head: +/- 45 stopni spindle speed range: the smallest 28 rpm, the largest 1400 rpm main motor: 11 kW The milling machine has a mechanical tool clamp that allows the operator to automatically clamp the tools in the machine. The machine has been equipped with a central lubrication system and optical rulers (optical scales) for digital reading of the position in 3 axes. Machine is ready for inspection in central Poland.

Condition: like new (used), Year of construction: 2004, functionality: fully functional, travel distance X-axis: 450 mm, travel distance Y-axis: 300 mm, travel distance Z-axis: 350 mm, feed rate X-axis: 4 m/min, feed rate Y-axis: 4 m/min, feed rate Z-axis: 4 m/min, spindle speed (max.): 2,500 rpm, spindle speed (min.): 20 rpm, total height: 1,690 mm, total width: 1,480 mm, total length: 1,500 mm, table width: 400 mm, table length: 800 mm, type of input current: three-phase, table load: 400 kg, overall weight: 1,500 kg, input voltage: 380 V, workpiece weight (max.): 400 kg, input current: 16 A, input frequency: 50 Hz, milling length: 450 mm, Equipment: documentation/manual, Machine is complete with all accessories and tools three axes digital readout Heidenhahn X-axis range 450 mm Y-axis range 300 mm Z-axis range 350 mm Table length 800 mm Table width 400 mm Table load 400 Spindle speeds 2500 Rpm Dsdpfx Ajwnya Tsflswf X-axis feed 0-4000 mm/min. Y-axis feed 0-4000 mm/min. Z-axis feed 0-4000 mm/min. Dimensions (Estimated) Length 1500 mm Width 1480 mm Height 1690 mm Weight 1500 kg

Condition: good (used), functionality: fully functional, Vertical milling machine Dedpfx Afeumluweljwf

Condition: used, Year of construction: 1976, Technical details: table surface area: 1300 x 190 mm range of revolution per miute: 60 - 4000 Stufenlos U/min feed continuous: Pinole: 0,06 / 0,12 / 0,24 mm/U Dwedpfju Sq Emox Afljf quill stroke vertical: 140 mm spindle taper: SK 40 spindle head swivable left - right: 90° und 45° ° total power requirement: 3,0 kW weight of the machine ca.: 1620 kg machine dimensions LxWxH: 2,7 x 2,3 x 2,4 m Milling machine with universal milling head Spindle run right/left Table specifications: X/Y/Z travel: 860/380/460mm. feed X/Y/Z: 40 - 400mm/min. continuous rapid traverse 400mm/min. max. workpiece weight 30kg Equipment 3-way measuring display Mitutoyo with beam machine lighting Coolant tank with pump X- and Y-axis feed adjustable incl. accessories comparable to the picture *

Condition: used, Technical details: Dwodpfx Aou Ndfheflof x-travel: 880 mm y-travel: 300 mm z-travel: 900 mm w-axis: 60 mm spindle head swivable left - right: 60 ° table surface area: 880 x 300 mm machine weight approx.: 1200 kg dimension machine xH: 1,3 x 1,4 x 1,9 m incl. accessories *