Used milling machines - vertical for sale (59)

Condition: used, Year of construction: 1991, Technical details: x-travel: 1050 mm y-travel: 600 mm z-travel: 650 mm range of revolution per miute: 40 - 1720 / 12 step U/min spindle taper: SK 50 spindle head swivable left - right: 90° re/li und 45° = 360° ° distance spindle nose and table: 0 - 600 mm table surface area: 1700 x 470 mm feed continuous: X/Y= 15 - 625 + Z= 7,5 - 312 mm rapid traverse Z-axis: 1250 mm/min. rapid traverse:: X/Y: 2500 mm/min. total power requirement: 11,1 kW weight of the machine ca.: 2500 kg machine dimensions LxWxH: ca. 2,45 x 2,0 x 2,85 m Dkedpfjva Hd Rox Al Sju Equipment: with Huron universal milling head coolant system control panel machine feet Accessories Machine vice (jaw width 120mm) *

Condition: reconditioned (used), Year of construction: 1997, functionality: fully functional, The machine tool undergone a general overhaul, which included the repair of the mechanical part, the electrical part and the derivation of the geometry in accordance with the Technical Acceptance Conditions (WOT) and EN. The machine is adapted to the minimum requirements for occupational health and safety requirements. Basic technical data: table working area: 400x1600 mm spindle taper: ISO 50 longitudinal travel: manual/mechanical 1150/1120 mm cross travel: manual/mechanical 370/345 mm vertical travel: manual/mechanical 430/400 mm maximum angle of rotation of the vertical head: +/- 45 stopni spindle speed range: the smallest 28 rpm, the largest 1400 rpm main motor: 11 kW The milling machine has a mechanical tool clamp that allows the operator to automatically clamp the tools in the machine. The machine has been equipped with a central lubrication system and optical rulers (optical scales) for digital reading of the position in 3 axes. Dksdpfjurvl Rjx Al Sou Machine is ready for inspection in central Poland.

Condition: good (used), Used MEXIM vertical milling machine with cantilever design Machine for mold makers WIZARD 3-axis display Swivel head Table size: 660 x 360 mm Spindle speed: 20 – 1600 rpm Dodpfx Aleg Np Ene Sjku

Condition: used, Technical details: x-travel: 762 mm y-travel: 382 mm z-travel: 419 mm tool taper: Sk 40 table surface area: 1070 x 230 mm range of revolution per miute: 60 - 4.200 U/min feed continuous: 0,038/0,073/0,120 in 3 steps mm/min spindle stroke: 120 mm spindle taper: Iso 40 spindle head swivable left - right: 90 ° Dedpova Evfsfx Al Seku weight of the machine ca.: 1600 kg machine dimensions LxWxH: 1,8 x 1,5 x 2,15 m This machine is currently in the technical department. *

Condition: new, Variable speed ISO 40, Motorized cross table on all axes. 3-axis display included. Base with chip tray. Cooling system. LED lamp. Mechanical speed indicator. Motorized axes with variable speeds and rapid traverse. Lubrication system for guides with manual pump. Milling capacity with insert cutter: 100 mm. Milling capacity: 35 mm. Drilling capacity on cast iron with pilot hole: 60 mm. Maximum drilling capacity on steel with pilot hole (s235jr): 24 mm. Spindle mount: ISO40 DIN2080. Arbor: 86 mm. Spindle stroke: 120 mm. Head tilt: +/- 45°. Vertical head rotation: Dksdpoh Im H Sjfx Al Ssu +/- 90°. Head body rotation: +/- 180°. Vertical spindle speed: (2) 60 ÷ 500 | 500 ÷ 3600 rpm. Motor: 400 V 50 Hz 2.25 kW. Distance between machine nose and table: 45 – 395 mm. Distance between spindle axis and column: 215-450 mm. Table size: 1246 x 230 mm. Table longitudinal travel: 850 mm. Table transverse travel: 310 mm. Maximum load capacity: 400 kg. Dimensions: 1680 x 1500 x 2100 h mm. Net weight: 1000 Kg.

Condition: new, Hans Schreiner drilling,- & milling machine with 90° pivoting gear head and variable speed for the commercial demand. With halogenlamp and coolant system. Dodjvrv Ngjpfx Al Ssku Technical data: Spindle cone MT 4 Motor output power S1 1,5 kW, 400 V Weight 310 kg Table dimensions 800 x 240 mm max. workpiece height 400 mm Speeds 50 - 530 and 530 - 2600 rpm Max. drilling capacity in steel 45 mm Worktable travel x=500mm, Y= 175 mm Optional equipment: Underframe with coolant tub Drill chuck, quick release chuck, milling cutter and tools

Condition: new, Solid drilling and moulding machine with 90 ° pivoting drive head for the commercial demand. With halogenlamp and coolant tank Technical data: Spindle cone MT 4 Motor output power S1 1,5 kW, 400 V Weight 310 kg Dodovrv I Njpfx Al Ssku Table dimensions 800 x 240 mm max. workpiece height 680 mm Speeds 6 80 till 1575 rpm 80/150/260/450/900/1575 U/min Max. drilling capacity in steel 40 mm Worktable travel x=585mm, Y= 205 mm Optional equipment: Drill chuck, quick release chuck, milling cutter and tools 2 speed motor Underframe with coolant tub

Condition: new, Solid Hans Schreiner drilling machine Z5045C/1 for the commercial demand. with automatic quill feeder, work light, coolant system and drill chuck Technical data: Spindle cone MT 4 Motor output power S1 1,1 kW, 400 V Table dimensions 730 x 210 mm max. wokrpiece height 700 mm Dodpfx Asvrv I Ael Sjku Speed 12 80 till 2500 U/min Worktable travel 500 x 205 mm Weight 470 kg

Condition: used, Year of construction: 1995, Technical details: x-travel: 500 mm y-travel: 200 mm z-travel: 300 mm spindle taper ISO: SK 40 spindle head swivable left - right: je 45 ° Dkjdpfju Ndfujx Al Sju range of revolution per miute: 45...2000 U/min headstock: dist. table - spindle center: max. 300 mm distance spindle nose and table: max. 300 mm feed:: 16...800 / 18 step mm/min table surface area: 1000 x 165 mm table swivelling to both sides: ja Grad control voltage: 380 V total power requirement: 4,6 kW machine weight approx.: 1540 kg dimension machine xH: 1,5 x 1,5 x 1,6 m The milling beam is slide adjustable with 580mm. Throat min. / max. 250/800mm *