Used mills for sale (94)

Condition: like new (used), Year of construction: 2019, operating hours: 30 h, functionality: fully functional, machine/vehicle number: 10804, overall weight: 3,800 kg, rotor diameter: 500 mm, number of blades: 5, total length: 2,100 mm, total height: 3,878 mm, total width: 2,283 mm, rotor width: 1,000 mm, power: 52.5 kW (71.38 HP), filling opening width: 1,200 mm, filling opening length: 1,200 mm, input voltage: 400 V, Includes 1 set of new knives, various screens, extraction fan, and cyclone filter. Godpfeyrc E Esx Ah Ejtw

Condition: used, Feed opening: approx. 600 x 580 mm Rotor width: approx. 600 mm Gtodpjxgtr Djfx Ah Eew Rotor diameter: approx. 450 mm Stator knives: 2 Rotor knives: 4

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Gedoxgtthopfx Ah Eotw Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, Year of construction: 2016, functionality: fully functional, 2 used Cumberland grinders Price per unit (€3,200) Year of manufacture: 2016 Technical specifications - Motor power: 7.5 kW - Rotor speed: 1,440 rpm - Knife configuration: - 3 rotating knives - Power supply: 380–420 V - Rotor type: Open, soundproofed Gjdpfx Aeymr Rtoh Eotw - Typical applications: Granulation of injection-molded parts

Year of construction: 2008, condition: used, functionality: fully functional, 2 Used Cumberland Grinders Price per unit (€2,000) Year of manufacture: 2008 Gtodpfx Asymr N Neh Ejw Technical Specifications - Feed throat size: 305 mm x 400 mm - Motor power: 4.0 kW - Rotor speed: 1,440 rpm - Knife configuration: - 3 rotating knives - Power supply: 380–420 V - Rotor type: Open, soundproofed - Typical applications: Granulation of injection-molded parts

Condition: ready for operation (used), 🔧 Key Specifications Cutting System: Four-shaft configuration with two cutting shafts and two clearing shafts. Cutting Disc Diameter: Approximately 280 mm (11 inches). Gtedpfswnx Uiex Ah Eew Cutting Unit Dimensions: Working width of 1,000 mm and length of 700 mm. Hopper Opening: Approximately 1,400 mm x 1,600 mm. Motor Power: Typically equipped with two 18.5 kW motors. Operating Speed: Low-speed operation at around 25 rpm for high torque and reduced noise levels. Weight: Approximately 2,500 kg

Year of construction: 2023, condition: excellent (used), Thermogranulator consisting of extruder, water bath, and granulator. Compact version design. Melt pressure control for regulating the extruder speed and adapting the granulator speed according to the melt pressure. Suitable for producing granulate that matches virgin material in terms of geometry and flow properties. Gjdpfeyrmq Sox Ah Eetw

Year of construction: 1977, condition: excellent (used), machine/vehicle number: 0392, Feeding width (mm): 500 Kw: 7.5 A: 380 Gtodpfx Ahodt Rths Ejw

Year of construction: 2002, condition: good (used), For sale 4 Getecha sprue mills with screw conveyor Type: GRS 182 - A 2.29 Gtsdpfx Ahjhzqzro Ejw year of construction 04/2002 Volt: 400 Amp.: 2.29 Granules sieve dm 5 mm Machines purchase / sale PURCHASE / SALE OF PRODUCTION & METALWORKING MACHINES ETC. Do you need a high quality but inexpensive metalworking machine for your production? Or do you want to sell yours? For more information or to contact us please visit our website

Year of construction: 1997, condition: used, functionality: fully functional, The Getecha granulator mill is for sale; Motor: 1.5 kW Mill height: 1650 mm Feed opening: 285 mm x 320 mm Mobile Blades are in good condition Screen: 8 mm Speed: 1350 rpm Gtjdpsx R Twdefx Ah Esw

Year of construction: 2007, condition: used, functionality: fully functional, The Moretto auxiliary granulator is for sale; Power: 2.2 kW Blades: 3 pcs, sharpened Gtodpfxeyk Effo Ah Esw Stator blades: 2 pcs Screen: 6 mm Mobile (on wheels)

Year of construction: 2008, condition: excellent (used), Piovan mill Type : RN 20/30 Year : 2008 Gtjdpfxjighlpo Ah Ejw Article number : 439

Condition: excellent (used), Cutting mill, side mill, granulator, shredder, plastic shredder, granulate mill, granulator, rotor mill, recycling technology, Gsdpfowg Axvjx Ah Estw -Condition: Mill is equipped with a new set of blades, but without a control unit or sieve. -Manufacturer: RAPID, Side-mounted mill cutting mill -Type: 650-M -Drive motor: 37 kW -Number of cutting blades: 10 pieces -Number of counter blades: 2 pieces -Inlet cross-section: 600 x 300 mm -Rotor width: 610 mm -Rotor diameter: 300 mm -Quantity: 1 cutting mill available -Price: per piece -Dimensions: 1385/1200/H2170 mm -Weight: 1208 kg

Year of construction: 1988, condition: ready for operation (used), The offer includes: Infeed conveyor by Herbold Metal detector by S&S Granulator by Herbold with 8, 10, and 12 mm screen baskets Gtodpjyi Hbfefx Ah Eew Control cabinet with overload protection

Condition: good (used), Includes discharge screw for transporting the material. Two other smaller grinding mills are also available; if desired, all three can be sold as a package. Gedpfxjx N T Due Ah Ejtw

Condition: used, Cutting sieve, shredder sieve, sieve basket, sieve for chopper, shredder system, single-shaft shredder, shredder, granulator, shredding machine Godpfsb Hiylox Ah Estw -Perforation: 65 x 65 mm -Recording holes: Ø 75/30 mm -with supporting ribs -Drawing with the pictures -Dimensions: 1600/1844/H620 mm -Weight: 696 kg

Year of construction: 2011, condition: good (used), Shredder system, single-shaft shredder, shredder, chipper, cutting mill, single-shaft crusher, rotor mill -Shredder system: completely made of stainless steel, for frozen meat or other -Motor power: 4 kW -Speed: approx. 60 rpm -Number of cutting knives: 10 pieces -Dimensions cutting blade: 250 mm -Filling spout 500 x 895 x H480 mm Gsdpfx Aeh Di H Djh Ejtw -Dimension 880/1390/H2060 mm -Weight 640 kg

Year of construction: 1977, condition: ready for operation (used), A Rapid heavy-duty granulator is available. Only unreinforced polyolefins were ground with the mill, so it was not subjected to any load. Flour chamber opening X/Y: 1050mm/600mm, motor power: 75kW, rotor knives: 2x5, stator knives: 2, sieve: 8mm, throughput: depending on material. Machine dimensions X/Y/Z: approx. 2750mm/2100mm/2850mm, machine weight: approx. 4550kg. Documentation available. On-site inspection is possible. Gtjdpfxjvwcxfe Ah Eow

Year of construction: 2012, condition: ready for operation (used), Rotor diameter: 450mm, cutting chamber opening X/Y: 900mm/540mm, rotor blades: 3 x 32, stator blades: stationary, drive power: 37kW, throughput: 900kg/h, machine dimensions X/Y/Z: approx. 1600mm/1700mm/1500mm. Documentation available. Gsdpjucw S Sjfx Ah Estw

Year of construction: 2022, condition: ready for operation (used), A Getecha plastic granulator is available. Rotor diameter: 300mm, cutting width min./max.: 400mm/1260mm, number of rotor knives: 5, power: 5.5kW. Including an enlarged control cabinet. Overhauled with less than 100 operating hours. Documentation available. Gsdoucw S Eopfx Ah Eetw

Year of construction: 2015, condition: ready for operation (used), A total of seven identical Tria S.p.A. plastic granulators are available. Rotor knives: 3, stator knives: 2, rotor diameter: 260mm, motor power: 7.5kW, throughput: 150kg-220kg/h, hopper opening: 350mm/300mm, hopper capacity: 30l, discharge hopper capacity: 15l. Machine dimensions X/Y/Z: approx. 1200mm/800mm/1750mm, weight: approx. 650kg. Documentation available. On-site inspection is possible. Godpfxewxd Upj Ah Eotw

Condition: excellent (used), Year of construction: 1994, functionality: fully functional, Manufacturer Motan Type 40-20/BL-T MT Power 3 kW Gjdpfeuk Aiyjx Ah Ejtw Blade inlet 40 x 20 cm Technical condition very good

Year of construction: 1995, condition: used, functionality: fully functional, 3 rotor blades 2 stator blades Blade inlet 220 x 180 mm Gsdpsv Nnr Iefx Ah Estw Power 3 kW

Year of construction: 2003, condition: good (used), functionality: fully functional, Manufacturer: HERBOLD Model: CS450/600-2A Rotor / grinding chamber dimensions: 450 x 600 mm Number of rotor blades: 5 Number of stator blades: 2 Drive motor power: 22 kW Spare blades: 3 pcs Gtodpsxl R Imofx Ah Ejw Additional screens: 5 pcs Equipment: Milled material discharge + silo This mill features three additional, different material infeed options (various designs)!!!

Condition: ready for operation (used), Number of blades: 6, rotor diameter: 350mm, engine power: 50kW, with construction as steel/welded construction in reinforced design and documentation, an inspection is possible, year of construction unknown, was overhauled in 2022. Gtjdpfx Ahen Tpmuj Eew