Used Planing & moulding machines for sale (565)

Condition: good (used), WACO BKW resaw + Weinig Hydromat planing line + 2x Fischer SFV800H with handling and packing equipment. Weinig pack infeed chains. Weinig tilt hoist with stick collector Weinig chain cross feed system feeding to belt conveyor before resaw. Weinig single Belt Panel Conveyor. Waco BKW-Twin resaw (2x 45kW) renovated Weinig resaw Accelerator Weinig turning and separating station after resaw Weinig chain cross feed with flat separator Dcjln E A Iswaapfjheg Weinig multi crosscut saw with 3x trimmer saws Weinig cross transfer system after multi crosscut saw with sweeper system to belt conveyor. Weinig EM15 4x feed roller moulder infeed accelerator before moulder Weinig Hydromat 23 moulder (9 spindle) Weinig belt conveyor outfeed after moulder feeding to 2x inline preparation lines. Tallybeam reader system. 2x Weinig bundler Units/Conveyors. 2x Mosca SoniXs-MP-6 T Strapping Machines, 2x Fischer SFV800 shrink wrappers (movable with side mounted bypass belt conveyor for when shrink wrapper is not needed) 2x Weinig outfeed conveyors after shrink wrappers Weinig v-belt cross feeder feeding to flat belt cross feeders Weinig layer stacker system (2x Weinig Unistack 400 automatic stackers) with stick magazines Automatic top sheet foil dispenser for pack covering. Weinig automatic pack pneumatic pressure system to squeeze packs Mosca KOF-611 automatic pack strapping machine. Weinig roller conveyors feeding to mini pack stacker system. Weinig chain cnveyors to dispatch. Siemens Simatic Driven PLC. Available immediately.

Condition: used, working width: 410 mm, planing width: 410 mm, working height: 410 mm, total length: 2,590 mm, Planer, planer SAC 410 mm Specification: • condition - used • working width - 410 mm • length of the tops - 2590 mm • culaga adjustable at an angle • engine power - 4.0 kW • spindle speed - 5000 rpm • manually adjustable planing height • health and safety guard above the shaft • 4-knife shaft with a diameter of 120 mm for traditional knives • start-up 0-1 • output for sawdust extraction - fi 100mm • weight approx. 600 kg • dimensions 259x90x105 cm (length x width x height) Deln E Aswa A R Eo Ihocg Additional information: • acceptable technical condition, after replacing the bearings • the photos shown show the actual condition of the item for sale • possibility of switching on and checking the device on site. • the price given in the auction does not include VAT

Condition: excellent (used), SCM Topset XL four-sided planer Working width 230mm Worm height 140mm Number of spindles 6 Bottom 5.5kw r.p.m Right 5.5kw 6000 r.p.m Left 7.5kw 6000 r.p.m Top 7.5kw 6000r.p.m Top 7.5kw 8300r.p.m Bottom 7.5kw 8300r.p.m Spindles diameter 40mm Doln Ejqvzn Hj A Ihscg Pneumatic pressures Electronic height and working width setting Feed speed 5-40m/min CE certificate

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 02-84-022, power: 37 kW (50.31 HP), 4-SIDED PLASTER MOULDER, 4 TOOL HOLDERS + UNIVERSAL SHAFT 2.50M TABLE & REINFORCED MOTORS Brand: CASADEI Type (Model): MATRIX 4+1 Serial number: 02-84-022 Year: 2002 (Photos taken before servicing & cleaning) MAKING CAPACITIES (thickness x width): 6 to 155 X 25 to 230 mm Dcsln E A Ieu Sr Ivohog - 4-sided planer and moulder - Working width 25 to 230 mm - Working height (wood thickness) 6 to 155 mm - Maximum section of finished wood 155 x 230 mm - Minimum working length 480 mm - Adjustable pass grip max 10 mm - Shaft rotation speed 6000 rpm COMPOSITION OF THE PLASTER : - Robust welded frame - Soundproofing and panoramic cover on gas cylinders - Raised control panel, operator face - Steel infeed table 2500 x 250 mm Height from the ground: 880 mm Lateral infeed spring pusher Manual table lubrication unit located after planing 1) Lower horizontal shaft 5.5 kW TERSA tool holder Ø 125 x h.240 mm 1 retractable vertical roller presser 2 & 3) Right then left vertical shafts 1 x 7.5 kW TERSA tool holder Ø 125 x h.165 mm 4) Upper horizontal shaft 7.5 kW TERSA tool holder Ø 125 x h.240 mm - Adjustable pressure shoe at the outlet 5) Universal shaft 7.5 kW Ø 40 x 255 mm 1 horizontal retractable roller presser DRIVE: - Feed with variator: 5 to 25 m/min Drive motor: 1.1 kW (1.5 hp) - 8 independent feed rollers with pneumatic pressure: 2+2 grooved steel then 2+2 rubber coated OTHER CHARACTERISTICS: - CE marking - General power supply: 380 v. Three-phase 50 Hz - Padlockable switch, automatic star-delta starts Front/rear punch stops - Installed power: 37 kW (50 hp) IN 62A - Brake motors - Shaft drive by cardan shafts - Digital indicators (Siko type counters) for precise manual adjustment of each operation - Electric raising and lowering of the beam for thickness adjustment, Raising/lowering motor: 0.37 kW - Axial adjustment of the shafts: Lower horizontal from 0 to 15 mm Upper horizontal from 0 to 25 mm Vertical: 0 to 25 mm - Acceptable tool dimensions: On lower horizontal shaft: Ø 120 to 140 mm To be profiled on vertical shafts: Ø 100 to 180 mm To be profiled on upper horizontal shaft: Ø 100 to 180 mm End mill for surfacing: Ø140x12x40 mm - Recommended pneumatic supply: 7 bars Working pressure: 6 bar Average consumption: 0.85 Nl/cycle Connection: 1/2" G - Suction, upper centralized nozzle: Ø 250 mm Required air speed: 25 m/sec minimum Flow rate: 4500 m3/h - Technical manual included. - Machine equipped with 4 TERSA shafts Dimensions: 4700 x 1700 x h.1800 mm We invite you to contact us for the supply of consumables, accessories and/or suction systems.

Condition: like new (used), Year of construction: 2003, operating hours: 10,000 h, CE machine in perfect condition, has worked very little. Input table 2000 mm Speed 5-35 m/min Minimum maximum workable dimensions: 15x10 mm / 230x120 mm Composition: Inf 5.5 hp Right-Left-Right 11 hp Sup 7.5 hp Inf 5.5 Hp Univ. 5.5 hp Djlnsv Sm His E A Ihecg Preset with electronic width and height movements, programmable and storable. Ribbed bench suitable for planing short pieces. New control unit, changed with regular invoice, original SCM piece. New universal shaft motor.

Condition: good (used), WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included Dcsln Esv Hqn Ts A Ihog bottom spindle - 4KW, right and left 7.5KW, top - 5.5KW feed on cardan shafts with smooth adjustment electric lifting up and down electric adjustment of planing width branded machine preserved in good condition

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed Dcoln E A Iov Uwmxoheg

Condition: like new (used), REX HOMS-410 four-sided planer - German manufacture - for wet wood TECHNICAL PARAMETERS: planing width max 410 mm planing height on both sides 200 mm planing height on four sides 200 mm diameter of spindles 40 mm power of spindle motors 2 x 11 kW power of spindle motors 2 x 5.5 kW feed speed continuously adjustable feed speed inverter regulated three top pulling shafts three bottom drawing shafts two auxiliary shafts in the worktop Doln E Aorwl Dbj Ihscg brake minimum workpiece length 450 mm machine overall dimensions (length / width / height) 250 / 220 / 180 cm weight ~ 3500 kg

Condition: used, Year of construction: 2012, machine/vehicle number: 12E000017100300, Composition: 7 positions including 1 universal Dcoljtvxclon E A Ihsg Capacity 230mm/160mm Chrome table Table lubrication Training rollers in the wet wood table Motor power: M1-M2-M3-M7=5.5kw M4-M5-M6=7.5kw Advance speed from 6 to 30m/min Voltage: 380V Weight: +- 5,400kg

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, WEINIG Unimat 500 - 5 spindles - planing width max. 230 mm - Planing height max. 120 mm - Feed electronically frequency-controlled 5-30 m/min. - Feed motor 4 KW - 1st spindle bottom 5.5 KW - 2nd spindle right - motor right / left 11 KW - 3. spindle left with electric axis adjustment FORWARD - BACK - 4. spindle top 7.5 KW with electric axle adjustment HIGH-LOW - 5. spindle bottom 5.5 KW - Spindle speed 6,000 rpm. - Spindle diameter D=40 mm - Dressing table 2,000 mm with jointing ruler - Infeed roller in front of 1st lower tool pneumatic, high-low controlled - Lateral pressure roller in front of the left spindle, moving and spring-loaded - Pneumatic pressure roller - Driven rubber roller in the outfeed table - electronic digital displays to 1/100 mm - Manual lubricant pump - Central positions of the lubrication points - GRP safety hood - interior light in the safety hood - Total connection approx. 36 KW 2x radial CNC-controlled adjustment: - Positioning of the spindle in conjunction with the memory function for spindle no. 3 + 4 Memory system: - For saving the setting values of profiles - Spindle axes with electronic double displays Functions: - Save the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are brought into alignment by manually adjusting the spindle - 99 memory locations Dcoln E Aetqd Nwj Ihjg Dimensions: - Length 3,320 mm (3,620 mm discharge hood) - Width 1,710 mm - Height 1,850 mm Machine technically and optically in very good condition Price: by arrangement Payment: net cash before loading Delivery time: approx. 2 - 3 months All changes, errors in the technical data reserved. No guarantee on printed data. Subject to errors and prior sale.

Condition: excellent (used), max planing width 770mm max planing height 200mm additional 5 spindle 220mm Dslnev H U Nbo E A Ihjcg

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, working width: 230 mm, working height: 120 mm, jointer table length: 2,500 mm, number of spindles: 6, 4-sided planer TECHNICAL DETAILS Number of spindles: 6 Sawing unit: horizontal (glazing bead saw) Spindle arrangement: bottom / right / left / right / top / bottom Saw unit power: 2.2 kW Spindle power: 5.5 / 7.5 / 7.5 / 5.5 / 7.5 / 5.5 kW Working width: 20 - 230 mm Working height: 8 - 120 mm Spindle diameter: 40 mm Dressing table length: 2.5 m Doln E A Ijualg Ejhecg Feed rate: 5 - 24 m/min, 4 kW Waxilite pump: manual Rollers in machine table: 2 pieces, driven

Condition: excellent (used), Year of construction: 2010, Weinig Powermat 500 (6 spindle + Universal) Dcolnev Uwmre E A Ihsg CNC position adjustment. 4798 work hours Machine number 114015 (2010) 160mm x 230mm. All 7 spindles Powerlock, 8,000 RPM Bottom 7.5 kW Right 11 kW Left 11 kW Top 15 kW Top 15 kW Bottom 7.5 kW Universal 7.5 kW 5,2kW feed motor 30m/min feed speed. 2m infeeed table. CNC positioning on spindles 2,3, 4, 5, and 7. 3 way CNC positioning on the universal spindle. Powercom Plus. Possible to supply with automatic infeed and outfeed if needed. Possible to supply with complete handling solution with stacker if needed.

Condition: good (used), WEINIG PROFIMAT 22N four-side planer - DTR - German production - adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) 4 kW lower head 2) right head 3) 5.5 kW left head 4) 4 kW upper head Dcjlnoh Akbae E A Ihjg 5) universal head 360 ° 4 kW 2.2 kW feed motor feed speed 5 - 20 m / min four upper drawing steel rollers two upper pulling rubber rollers one pull roller in the table top feed on cardan shafts electric height adjustment pre-table length 1970 mm central lubrication pneumatic clamps dimensions of the machine (length / width / height) 380/200/170 cm weight ~ 2000 kg

Condition: used, Year of construction: 2011, machine/vehicle number: 0803078, Capacity 230/150mm 4 positions Chrome table Training rollers in the table Table lubrication Centralized lubrication Control panel Electronic speed variator Djln E A Iorvqd Nehscg Engine brakes Voltage: 380V

Condition: excellent (used), Weinig Profimat 23 four-sided planer Working width 230mm Dcsln Ejv Ealre A Ihsg Working height 120mm Number of spindles 6 Bottom 4kw Right 7.5kw Left Top 7.5kw Bottom 4kw Universal 5.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pressure of the pulling rollers Electric adjustment of the pressure wheels Drive on cardan shafts CE certificate

Condition: good (used), Year of construction: 1988, WACO HM 200 moulder with splitting unit in the end of machine. Max. working width/high : 200 x 120 mm Spindle diameter : 45 mm Max. infeed speed : 60 mtr/min Moulding heads with 6 knives Spindle configuration : Dslneur Nk He E A Ihscg 1. buttom 11 Kw 2. Top 11 Kw 3. Right 7,5 Kw 4. Left : 7,5 Kw Splitting unit : 5. Right saw 37,5 Kw 6 Left saw 37,5 Kw Lots of extra tools, heads + sawblade boxes

Condition: excellent (used), Weinig Hydromat 17 BL planner with destacker Feed: 60 m/min Heads: 1. lower - 11 kW 2. right side - 7.5 kW 3. left side - 7.5 kW 4. upper - 11 kW 5. lower - 7.5 kW 6. upper - 7.5 kW 6 pulling rollers in the table Feed motor - 15 kW Planing width - 170 mm Planing height - 120 mm Machine on an elevated platform Djln E A Ijv Euy Rjhscg Perfect condition!

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing Doln Eev T Riwe A Ihscg 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: like new (used), Weinig Hydromat H22N four-side planer - German production - DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm Dceln Eepvi Sko A Iheg - spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers one upper rubber pulling roller rests on horizontal spindles jointer on the lower spindles Transport dimensions 500x200x160 cm weight 4 tons

Condition: ready for operation (used), Year of construction: 1992, Functionality: fully functional, working width: 220 mm, planing height: 120 mm, planing width: 220 mm, working height: 120 mm, total width: 1,400 mm, total height: 1,350 mm, total length: 3,100 mm, overall weight: 1,210 kg, power of feed motor: 1,500 W, rotational speed (min.): 6,000 rpm, height adjustment type: electric, Four-sided planer CASADEI C4 profiler Specification: • condition - used, after inspection, ready to work • manufacturer - CASADEI • model - C4 • working width - 220 mm • working height - 120 mm • motors on vertical spindles - 2 x 4.0 kW • motors on horizontal spindles - 2 x 4.0 kW • feed motor - 1.5 kW • total power 17.5 kW • electric adjustment of planing height • manual adjustment of planing width • 4 spindles equipped with spiral heads • vertical profiling heads, adjustable up/down (like in a low spindle milling machine) • pulling roller before the first head • long insert table with dimensions 24 x 247 cm • 2 feed speeds (6 and 12 m/min) • feed on cardan shafts • roller pressure on springs • pump for lubricating the table Djln E A Isv U Nryjhscg • extraction nozzles fi 120 and 140 mm • soundproofed soundproofing cabin • weight - 1210 kg • year of production - 1992 • manufacturer's documentation in Italian • dimensions 310 x 140 x 135 cm (length x width x height)

Condition: ready for operation (used), Working width: 220 mm Working height: 120 mm 5 spindles Spindle arrangement: bottom / right / left / top / right Motors: 5.5 kW, 7.5 kW, 5.5 kW, 5.5 kW Table lubrication Feed speed: 6/22 m/min Year of manufacture: 1990 Machine length: 4400 mm Dcslev Dh Sdon E A Ihog Width: 1700 mm Height: 1250 mm

Condition: used, Number of spindles 5 St. Working width 20 - 230 mm Working height 8 - 120 mm Length of the planing table 2000 mm Feed motor 4 kW Feed speed 5 - 30 m/min. Control CNC Weinig Unimat 500, window version ----- Machine will be cleaned and completely checked. Short summary: ----- 5 spindles with option for glass bead removal Left and upper spindle controlled for width and height: 2 axial and 2 radial CNC-controlled adjustment and positioning of the spindles in conjunction with the memory function CNC-controlled adjustment and positioning of the feed up/down in conjunction with the memory function Working width (with tool flight circle 125 mm) 20-230 mm Working height (with tool flight circle 125 mm) 8-120 mm Technical manufacturer description: Delsvnwbijn E A Ihjcg ----- 1st spindle ----- First lower horizontal spindle Motor with brake 5.5 KW (7.5 HP) Diameter 40 mm Speed ??6,000 rpm Tool flight circle 125 - 145 mm Axially adjustable travel 5 mm Folding device, including folding cutter Table insert hardened in front of 1st lower spindle 2nd spindle ----- First right vertical spindle Motor with brake 7.5 KW (10 HP) Common motor with left vertical spindle Diameter 40 mm Speed ??6,000 rpm Tool flight circle 40 mm below table level 100-200 mm Tool flight circle 55 mm below table level 100-180 mm Max. tool diameter behind stop level 180 mm Maximum throat depth 35 mm Axially adjustable range 60 mm Right spindle pneumatically controlled axially (40 mm) via selector switch, max. saw diameter 200 mm 3rd spindle ----- First left vertical spindle Common motor with 1st right vertical spindle Diameter 40 mm Speed ??6,000 rpm Tool flight circle 40 mm below table level 100-200 mm Tool flight circle 55 mm below table level 100-180 mm Maximum throat depth 35 mm Axially adjustable range 60 mm Axially adjustable range 60 mm 4th spindle ----- First upper horizontal spindle Motor with brake 5.5 KW (7.5 HP) Diameter 40 mm Speed ??6,000 rpm Tool flight circle 112-200 mm Tool flight circle for straight cutter heads max. 180 mm Maximum throat depth 35 mm Axially adjustable range 40 mm Split pressure shoe in front of upper spindle, adjustable to tool flight circle and swinging away from the tool, spring-loaded. Pressure shoe in front of and discharge after the upper spindle with electronic digital displays, integrated in the memory function or the PowerCom. Upper horizontal spindle pneumatically controlled axially (40 mm) using a selector switch, max. saw diameter 200 mm Glass bead removal to upper spindle, pneumatically controlled up/down. 5th spindle ----- Second lower horizontal spindle Motor with brake 4 KW (5.5 HP) Diameter 40 mm Speed ??6,000 rpm Tool flight circle 112-200 mm Maximum throat depth 15 mm Axially adjustable range 35 mm Spindles in general ----- All throat spindles dynamically balanced for high concentricity. 5 quick-release spindle nuts Joint control of the right spindle axial, upper spindle axial and the glass bead removal pneumatically controlled up/down. Feed system ----- Frequency-controlled feed, infinitely variable with brake 4 KW (5.5 HP) F...

Condition: refurbished (used), Year of construction: 2002, Functionality: fully functional, New infeed and outfeed machinery for wood supply to moulder and out of it. Weinig chain pack infeed, tilt infeed, gross chain infeed system (fully renovated). Feed speed from 20 - 100 m/min. Maximum and minimum working thickness: 12 - 100 mm Maximum and minimum working width: 50 - 247 mm Please find techn. specification with drawings in attachment below Dolnev Tmpts E A Ihocg

Condition: ready for operation (used), working width 230mm working height 120mm 5 spindles spindles set: bottom/right/left/top/bottom spindles diameter 40mm two axes heads regulation variable regulated feeder spindles speed 6000 RPM Djln E A Iervhhqjhecg