Used Other metal processing machinery for sale (503)

Condition: reconditioned (used), Year of construction: 2008, Functionality: fully functional, machine/vehicle number: 95461, total width: 4,200 mm, total length: 2,200 mm, total height: 3,400 mm, pressure: 4.1 bar, operating pressure: 3,800 bar, type of input current: three-phase, overall weight: 6,000 kg, year of last overhaul: 2024, Offered for sale by the official UK Water Jet Sweden authorised service centre is this Premium model NC4020ED complete with KMT intensifier pump. The machine has been serviced by ourselves using exclusively OEM parts and consumables and its dynamic accuracy remains with in the specification of the machine as new. The machine is offered with delivery, installation, training and warranty within the UK. Creb Ed Acevntqmshjb Available under power for any test or trial. The Fanuc controller drives the system, which as linear measuring scale along the X axis, and magnetic linear motors. This allows the heads to automatically reposition themselves during the cutting cycle to allow production of different sized parts on the same nesting. The YouTube link shows this technology in operation.

Year of construction: 2025, Condition: new, Sandblasting cabin for clean blasting work without soiling the working environment. Suitable for various blasting materials, e.g. quartz, glass ball, plastic ball, etc. Ideal for cleaning, derusting or paint removal from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are firmly attached to the housing Viewing window with glued-on protective film enables optimum visibility and work protection during workpiece processing Dust-free working due to all-round seals on lid and door frame Sturdy storage grid allows workpieces to be placed inside the cabin With drain opening for changing the blasting material Suction pipe for the blasting material fixed at the bottom of the collecting container With compressed air connection on the outside 2 large side doors for loading and unloading from both sides, also for longer workpieces Integrated exhaust system with replaceable air filter Control of the air flow via foot pedal 2 blasting guns: one fixed and one freely movable blasting gun 3 separate switches for on/off, suction and cabin lighting 2 fluorescent tubes (230 Volt), in separate housing with protective screen and replaceable protective foil, including 5 spare foils regulation of the working pressure via pressure regulator with manometer Scope of delivery: Crjb Ed Acjcqm Rrehob High-quality blasting gun with ceramic nozzle 4 pieces ceramic nozzles (4 / 5 / 6 / 7 mm) Incl. 5 pieces of replacement foils for S

Condition: like new (used), Year of construction: 2014, Ficep A164 Punching and Shearing Machine. Technical Specifications CNC PUNCHING AND SHEARING LINE FOR ANGLES – A A164 Crob Ed Acjv Irm Tjhjb Min. angle size (410 N/mm²) [mm] 30x30x3 Max. angle size (410 N/mm²) [mm] 160x160x19 Diameter per flange [no.] 2 Punching force [kN] 720 Max. punching diameter [mm] 32 Shearing force [kN] 900 ( 2000 ) Infeed length: 12m For more information, please contact us

Condition: used, Year of construction: 2000, .Pons cutting machine Total required power: 11 kW Machine dimensions LxWxH: 1.98 x 1.02 x 2.06 m Angle steel: 150 x 12 mm Impact force: 1000 kN Machine weight approx.: 2.95 t Hole punching machine: Capacity (dia. x thickness): 31 x 25 or 65 x 12 mm Square steel: 50 mm Round steel: 50 mm Flat steel: up to 500 x 18 mm Cutout: width x thickness: 65 x 13 mm Csb Ed Aceu U D Rxehjrb Machine weight approx.: 2950 kg pehu control 2018 replaced incl. motors pehu control is very user-friendly number of stamps present

Year of construction: 2017, Condition: ready for operation (used), General Data Machine weight 1500 kg Control Unit Brand FANUC Model 0i-TD Main Drive Spindle speed range 8000 rpm Spindle motor power 2.2 / 1.5 kW Number of axis 2 Creb Ed Ajvzc Alochjb Additional Equipment High efficiency through space savings High-speed gantry loader with a loading time of 3.5 seconds Wide choice of infeed and outfeed devices Built-in spindles with forced cooling and built-in sensors Smooth rotation with low vibration due to beltless drive This Miyano GN3200-2F2 was manufactured in 2017. Consider the opportunity to buy this Miyano GN3200-2F2 machine tool. Contact us for more information. Application Types Turning

Condition: good (used), Year of construction: 1999, VERTICAL MACHINING CENTER PALLETIZED HITACHI SEIKI S 50 CNC TYPE FANUC M18 X 1000 Y 500 Z 500 2 Pallets 1000 x 450 spindle 10000 rpm cooling in the center Cjb Ed Asvtlt Dechsrb ATC 30 stations ISO 50 chip conveyor

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, Cutting and Bevelling Machine / Brand: BOST / Type: DBL / Year of manufacture: 2011 The machine can be inspected under power by appointment. Ceb Ed Aev Hfuzochsrb The machine is in first ownership. Condition: Very good used, ready for operation (overhauled in 2016 and 2018). This machine is designed for the mechanical processing of pipes made of centrifugal casting and is fundamentally based on simultaneous machining processes, cutting, chamfering and longitudinal turning at the ends of the tubes within a variable range of longitudinal paths and diameters. The machine is made up of the following groups: - Machine bed - Synchronized heads Z II axis and W II axis - Longitudinal slide axis W and axis Z - Cross slide axis X and axis U - Support poles for lifting and supporting the YI and YII axles - Electrical and electronic equipment - Hydraulic systems - Pipe loading and unloading device, automatic pipe loading system. TECHNICAL DATA: - Max. diameter of the pipe to be processed: 250 mm - Min. Diameter of the pipe to be machined: 44 mm - Max. length of the pipe: 6.000 mm - Min. Length of the pipe: 2.500 mm - Max. workpiece weight: 1.5 tons - Power (turning): 2 x 22 kW - Position of the workpiece: Synchronized rotation - Machining process: simultaneous turning - Number of slides: 2 (symmetrical) - Number of steel holders: 2 (symmetrical) - Number of headstocks: 2 (symmetrical) - Number of support steady rests: 2 (symmetrical) Electrical equipment: - Drive motors: Digital series 611 - Power supply: 400 V, 50 Hz - Total connected load: 60 kVA EQUIPMENT / ACCESSORIES: - CNC control: Siemens SINUMERIK 840D - Teleservice - Self-centering chuck SCHUNK - Revolver head SAUTER - Ball screws - Gearbox - MARPOSS measuring device - Electronic handwheel - Coolant system - Chip conveyor - Device for picking up and ejecting at the ends of the tubes, for the cutting-off process synchronized with the cutting operation. - Automatic system for feeding and unloading the pipes - Central hydraulic group for the loading/unloading system - Documentation - CE marking Detailed technical data sheet and information on equipment available on request. Without guarantee of completeness and correctness the technical details and equipment. - Subject to prior sale -

Year of construction: 2025, Condition: new, Sandblasting cabinets for clean blasting work without soiling the working environment. Suitable for various blasting materials, e.g. quartz, glass ball, plastic ball, etc. Ideal for cleaning, derusting or paint removal from metal parts of all kinds, e.g. engine parts, fittings, signs, housings, rims, hinges. High-quality latex work gloves are firmly attached to the housing Viewing window with glued-on protective film enables optimum visibility and work protection during workpiece processing Crebecqm Rwo Ed Achsb Dust-free working due to all-round seals on lid and door frame Sturdy storage grid allows workpieces to be placed inside the cabin With drain opening for changing the blasting material Suction pipe for the blasting material fixed at the bottom of the collecting container With compressed air connection on the outside Very large, upward opening front flap with gas pressure springs for quick and easy loading and unloading Integrated extraction system with replaceable air filter Blast gun without finger trigger ? Control of the air flow via foot pedal 4 fluorescent tubes (230 Volt), in separate housing with protective screen and exchangeable protective foil, including 5 spare foils 2 separate switches for suction and cabin lighting regulation of the working pressure via pressure regulator with manometer Cross struts on the feet allow easy transport with a pallet truck Scope of delivery: High-quality blasting gun with ceramic nozzle 4 pieces ceramic nozzles (4

Condition: excellent (used), Here we offer a SUN-TEC cleanroom heating plate. SUN-TEC cleanroom heating panel Cleanroom workstation with heating plate 1600 mm x1200 mm x2200 mm Nomination: AC 200V 3 phases 50Hz 30A Max temperature: 200°C Crsb Ed Acjd Nfq Sehob Type: Y9AT417 Condition: used/used Delivery: (See picture) (Changes and errors in the technical data, information is reserved!) We can answer more questions on the phone for you.

Year of construction: 1998, Condition: excellent (used), Functionality: fully functional, machine/vehicle number: 802919, I will sell CNC LATHES - coil (made in Switzerland) ESCOMATIC NM640 Machine condition: under power, very good Type: precise fast CNC machine of Swiss type - longitudinal - Equipped with a high-speed tool spindle with 4 turning knives - Reduces labor costs thanks to longer working time using ring material, real work 24 h - The machine is fed from the ring. A roll of material can weigh 30 to 80 kg or 100-200 kg depending on the type of feeder - The material is pulled through the machine by a straightening and feeding unit - The machine can be equipped with a bar loader instead of a straightener and a roll of material - ESCO NM type machines can optionally be equipped with attachments for various side and front operations Equipment and characteristics: + The machine comes with many additional rotary, assembly and machining tools such as attachments, sliders, sleeves, etc. + The machine has never worked in our plant, it was purchased from France with a machine package and we did not install any additional elements that are originally in the box + The machine has only been checked in terms of the operation of the control with the feed mechanics and it is ok (Video - link) + Technical documentation Cobowdib Sj Ed Achorb + Box with additional equipment (photo) + Coil feeder for material 30-80 kg + Year of manufacture / Machine no.: 1998 / No. 802919 + Coil material straightener (in the machine) + Control: FANUC SERIES 21-TB - X and Z axes interpolation - Linear and circular interpolation - ISO software language - Tool radius correction - Groove threading - Rotation speeds with smooth regulation 800-1 to 2500-1 rpm + Clamps Type (SCHAUBLIN) = 80 + Sleeve 65 mm * Tool holder head: - Passage diameter: fi 0.5-6.5mm capacity - Max rotation speed 1200 rpm - Drive power 2.2 kW at 50% ED - Number of mounted rotary tools: 4 - Material cutting in the Z axis: 3.5 mm - Disc size: 7x3mm * Axis specification: - Fast forward – X (an): 15 m/m - Advance Work: X (Wfi): 0-15 m/m - Fast forward: Z1 15 m/m - Advance work: Z1 0-15 m/m - Resolution: X1 (Wfi): 1 μm - Resolution: Z: 1 μm with delay - Supplementation with additional in option: technical documents * Hydraulics: - Tank capacity: 11 liters - Power at 1500 rpm: 0.37 kW * Coolant (standard): - Tank capacity: 90 liters - Pump flow rate: 15 l/min - Fluid used: oil * Technical characteristics: - Power supply (standard): 3x380 V AC - Power supply (option): 3x200/220/240/380...500(VA) - Frequency: 50/60 Hz - Installed power: 7 kW - Fuses: 15A (delayed) * Pneumatics: - Min. network pressure: 5 bar - Consumption: 11 mg/h * Machine dimensions: - Width: 1600 mm - Height: 1200 mm - Weight: 1100 kg - Material unwinder width: ~approx. 1500 mm * Sale: - Free loading - We provide assistance in organizing transport in Poland and Europe - The machine is in our Plant - We are selling due to reorganization of production.

Year of construction: 2002, Condition: ready for operation (used), General Data Measurements width 1150 mm Measurements depth 1460 mm Measurements height 2260 mm Machine weight 900 Main Drive Number of axis 3 Movement X-Axis Movement 350 Y-Axis Movement 250 Z-Axis Movement 345 Workpiece Workpiece weight 450 Table Outer length 600 Outer width 300 This 3-axis CHARMILLES HD10 start hole drilling machine was manufactured in 2002. It features a work table size of 600x300mm, XY-travel of 350x250mm, and can handle a maximum workpiece weight of 450kg. Ideal for precise erosion tasks, the CHARMILLES HD10 machine we have for sale represents a robust addition to any machining setup. Contact us for further details regarding this machine. Ceb Ed Aeuznc Uocherb Application Types Other Machine Tools

Year of construction: 2010, Condition: used, Functionality: unexamined, machine/vehicle number: 1005002, Sensor-supported all-metal sorter EX Crsb Esv Evqwjd Achsb

Condition: excellent (used), Year of construction: 1980, I will sell a brush sander in good condition. Crob Eev T Tq Rsd Achjb - 1500/3000rpm. - 380V.

Condition: ready for operation (used), Various small appliances and power tools for construction site use are available. 1) Approx. 20 Makita impact wrenches 6906 230V. 2) Approx. 20 Makita TW 0350 230V impact wrenches. 3) Approx. 20 Bosch reciprocating saw GFZ 16-35 AC 230V. 4) Approx. 20 Bosch GFZ 16-35 AC 230V alligator saw. 5) Approx. 20 Bosch hand planer GHO 26-82 230V. 6) Approx. 5 Fein SCW 16-6 angle screwdrivers 230V. 7) Approx. 50 Hilti rechargeable batteries B14/3.2, B14/5.2, B22/5.2. 8) Approx. 10 Hilti SFH 14-A cordless screwdrivers. 9) Approx. 40 Hilti C4/36-90 chargers. 10) Approx. 15 Hilti WSJ 750-ET jigsaws. 11) Approx. 10 Hilti UD 16 drills. On-site inspection is possible. The machines were used on a construction site. Crob Eov S E Ekjd Achsb

Condition: excellent (used), Here we offer you a Mega Electronics conveyor spray processing machine. Mega Electronics Conveyor Spray Processing Machines Conveyor spray processing machines FAPC 3000 The new FAPC have been developed to be used with the latest development, Etching and abating chemistry for the production of printed circuits, metal signs and chemically milled metal components. The FAPC 3000 can accommodate panels up to 300 mm wide. Process chamber 450mm Water rinsing chamber 280mm Spray rods - Top 4 process chamber, 1 rinsing chamber Spray rods - floor 4 process chamber, 1 rinsing chamber Nozzle type Poly v-jet - 1/4 revolution removable Nozzles per pipe 3 + 4 for process, 4 for rinsing Nozzles Precisely mounted for perfect alignment. Adjustable, compact distribution systems. Flow control / pressure control Adjustable over the entire range from above and below. Conveyor speed control High torque. AC drive motor system, powered by a precision inverter with digital displays, for a precise operator reference Speed range 45 mm - 1.6 m / min Temperature range Ambient temperature up to 50°C -1°C Temperature Controller Digital Liquid level sensors For heating and pump Manual reset of overtemperature protection Voltage 220 / 240V 50Hz (13A plug) Creb Esd R Trkjd Achjb Dimensions: Height 670mm Depth 670 mm Length 1430mm including collecting bowl Type: FAPC 3000 Condition: used / used Scope of delivery: (See picture) (Changes and Ir

Condition: excellent (used), Charmilles machine mod. Roboform 200 Generator selection 64 A Maximum distance between table surface (DMFST): DMFST and fixed spindle nose ITS mm 554 DMFST and fixed spindle nose mm 535 Erowa ST40 DMFST and fixed spindle nose P100/150/200 mm 540 Working spindle stroke Z-axis mm 320 Maximum electrode weight kg 200 Maximum translation amplitude (radial) mm 10 Dimensions (height x width x depth) mm 2460x1675x1610 Approx. empty weight kg 1950 C-axis Tool changer Linear # 4 positions Table and work tank: Table dimensions (width x depth) mm 560x 400 Travel; longitudinal x-axis mm 320 Transverse Y-axis mm 220 Measuring resolution μm 1 Maximum element weight kg 500 Maximum movement speed mm/min 900 "T" fixing grooves: number 3 dimensions 12 groove spacing mm 125 Work tank dimensions (useful): (height x length x depth) mm 300x970x570 max./min. dielectric level mm 270/120 front door width mm 935 Dielectric group: Capacity 290 Filtering system - No. of paper cartridges mm 4 Filling pump flow rate l/min 200 Dimensions (height x length x depth) 870x500x1610 Empty weight Kg 220 Generator, control cabinet, CNC: Working current A 64 Battery protection power supply, duration h 100 Cathode ray screen Standard Working units in inches/metric Standard Alphanumeric keyboard Standard Single Reader USB stick Standard Dimensions (height x width x depth) mm 2100x650x600 Weight Kg 270 Current supply: Supply voltage V 380 Number of phases and frequency Hz 3 from 50 Compressed air bar 6 to 7 Maximum electrical power required (complete installation) with 64 A generator: kVA 5 - with 128 A generator: kVA Crjbswcd Epj Ed Achob

Year of construction: 2012, Condition: good (used), Functionality: fully functional, Vernet Behringer HDX918CNC CNC sawing/drilling line - HBP 410/923 year 2012 3 spindles Automatic tool changer. Creb Edev A Tgqe Achjb 24 meters at the entrance, 18 meters at the exit. Feed measurement system by clamps. Transverse transfers at the entrance and exit.

Condition: used, For sale wire bender. Crobjuc Urce Ed Achsb The machine is in working order, please contact me.

Condition: new, Year of construction: 2025, Functionality: fully functional, total length: 12,700 mm, total width: 2,700 mm, total height: 1,800 mm, overall weight: 12,000 kg, power: 50 kW (67.98 HP), input voltage: 380 V, input frequency: 50 Hz, Equipment: documentation/manual, Established and very reliable product that capitalizes on the Profilmec group's 50 years of experience in flying cutting. Range for thicknesses from 0.5mm to 4mm and diameters from 8mm to 102mm with speeds up to 220m/min The machines are turnkey installations and the price includes the electrical and automation part including switchboard and pulpit. All the components such as electric motors and lubrication part are top quality and made in Italy or Europe. Based on your needs we will propose a cutting machine made to measure for you. A well-established and very reliable product that capitalizes on the Profilmec group's 50 years of experience in flying cutting. Range for thicknesses from 0.5mm to 4mm and diameters from 8mm to 102mm with speeds up to 220m/min. Csbjv Eywnj Ed Achjrb The machines are turnkey installations and the price includes the electrical and automation part including switchboard and pulpit. All components such as electric motors and lubrication parts are of first quality and made in Italy or Europe. Depending on your requirements, we will propose a tailor-made cut-off machine for you.

Condition: as good as new (ex-display), Year of construction: 2025, Offered is a conventional cylindrical grinding machine EMAG Weiss W 11 Evolution. The conventional external-internal face cylindrical grinding machine fits perfect for single parts, prototypes and small batches. The basis of the EMAG Weiss W 11 Evolution machines is the established KARSTENS cylindrical grinder concept. No hydraulics, axis drives with servo motors and screw spindle drive, technology entry of the grinding parameters via touchscreen, automatic dressing with compensation, automatic axis release. TECHNICAL DATA Workpiece lenght: max. 1,500 mm Center height: 200 mm | Ooption 320 mm Workpiece weight: 250 kg External grinding wheel diameter: max. 500 x 80 mm Workpiece headstock: MK4 | Option MK5 / MK6 Tailstock: MK 4 Csb Ed Acjtmrlhshsrb Price, delivery time and equipment of the machine according to agreement.

Condition: excellent (used), Nabertherm Type: Q 200 Quenching bath Baths for quenching in oil or water as well as for cleaning and degreasing. Oil baths ensure uniform cooling of the workpieces and are fitted with lids, to immediately extinguish any ignition of the oil. An appropriate degreasing additive should be added to the water bath to clean the workpieces before tempering. Baths are supplied with batch carrier as well as inlet and outlet. Creb Ed Acjtq Hf Hshjb Bath Q 200 Internal dimensions: Width 380 mm , Depth 340 mm , Height 450 mm External dimensions: Width 550 mm , Depth 550 mm , Height 900 mm Volume 190 liters quenching capacity 25 - 30 kg/h Max. batch weight 20 kg Heating element Q 200 Connected load 6 kW Supply voltage 400 V Condition: used Scope of delivery: (see picture) (We reserve the right to make changes and errors in the technical data!) We will be happy to answer any further questions you may have on the phone.

Condition: used, The industrial vacuum cleaner is in good used condition. KW: 1,68 Cjboiabxqs Ed Achorb Speed: 2850 rpm

Condition: good (used), Ifsys Type: 114100 Type: VL 13 Feed system for screws Bunker system with 2x Vibroliner and 2x Vibrobunker 1x return belt 2x control unit FC 1000 Crsb Eociqi Nod Achjb Condition: used Scope of delivery: (See picture) (Changes and errors in the technical data, information is subject to change!) We will be happy to answer any further questions you may have over the phone.

Condition: excellent (used), GH Induction Type: 30 SMBC Transistor generator for inductive heating Medium frequency with series resonant circuit The SMBC generator series retains the traditional advantages of the Transithermic family of generators (high reliability, simple operation and high efficiency) in a series resonant circuit and a compact design, with cooling enclosed in the generator enclosure. Rittal generator cabinet and GH induction TC150 / 2 resonant circuit Ceb Ed Acjb E I Utshorb Voltage 400V Frequency 50 Hz Current 56 A Power 37.5 KVA as good as new condition! Scope of delivery: Transistor generator, Rittal generator cabinet with cooling and TC150 / 2 resonant circuit (Changes and errors in the technical data, specifications are reserved!) We will be happy to answer any further questions you may have on the phone.

Condition: excellent (used), Trumpf Here we offer a laser and punching machine. Technical data: Network: 400V/50 Hz Fuse: 3 x 100 A Connection power 65 kVA Working area X x Y without repositioning Combined operation 2585 x 1280 mm Punching operation 2585 x 1370 mm Laser operation 2585 x 1280 mm Power: Laser 2000 W Maximum sheet thickness 8mm Maximum punching force (including 20 kN hold-down device) 220 kN Active hold-down device (programmable in stages) 4.5-20 kN Maximum workpiece weight 200 kg Maximum clearance height In punching operation 35mm 1m laser operation 22mm Speeds: X-axis 90 m/min Y-axis 60 m/min Simultaneous Stroke sequence Punching 900 min Signing 2800 min C-axis Punching 60 revolutions/min Thread forming 330 revolutions/min Tools Tool positions on the linear magazine 19 with 2 clamps Number of tools when using multitool 19 to 190 tools Rotation of all tools 360° Tool change time 1.5-5 s Maximum punching diameter Single stroke 76.2 mm on all tool positions Standard multicut 200mm Maximum bending height 25mm Creb Edjm Ak Hus Achjb Maximum part size 500 x 500 mm Accuracy: Position deviation ± 0.1 mm Average position spread ±0.03 mm TRUMPF CNC control: Basis: Siemens SINUMERIK 840D Type: TC 6000 L 1300 Loading and dismantling must be carried out by the buyer! Condition: used Scope of delivery: (see picture) (Changes and errors in the technical data, information are subject to change!) We will be happy to answer any further questions you may have over the phone.