Used other plastic processing machinery for sale (66)

Year of construction: 2004, condition: ready for operation (used), An unpacking and screening station Schkinke Anlagenbau for the 3D printer EOS P3 is available. Machine dimensions X/Y/Z: approx. 1200mm/650mm/1500mm, weight: approx. 300kg. Including build frame. An on-site inspection is possible. Iiodpfjxltuvox Ag Uoc

Condition: new, Year of construction: 2024, functionality: fully functional, New UV light-curing units from Dr. Hönle, year of manufacture 2024, still in original packaging. Includes controller and various LED curing lamps for hardening and irradiation. Wavelengths: 356 nm and 460 nm, output: 5,000–30,000 W/cm². More detailed information can be found in the attached PDF. 3 packages available, can also be sold separately. Iiedpfxjw Ichle Ag Usc -- Please submit your offer price. Sale only within Europe (EU), including Turkey, the United Kingdom, and Switzerland. -- Technical specifications: see handout. Excluding packaging. Any guarantee or warranty is excluded. If you wish to dismantle the equipment yourself, please indicate this in your offer. We assume no liability for the accuracy of the technical data, for the completeness of included accessories or tools, or for the compliance with all safety and environmental protection requirements specified in accident prevention regulations.

Year of construction: 2010, condition: like new (used), 20m³ OFFLINE - FLUORINATION Fluorination of plastic surfaces with reactive gases for permeation reduction The technology used is suitable for treating surfaces of plastic fuel tanks (PFT) with the help of fluorine gas mixture (10% F2/N2) and changing the surface properties in such a way that a desired reduction of permeation of fuels from the PFT into the environment and thus the emission of fuel vapors is significantly reduced. Technical data: Vacuum chamber (capacity): 20 m3 Process time, individual: (approx. 2.5 hrs.) Chamber temperature, jacket: 90 - 100 °C Products introduced: Fuel tank and accessories Material: stainless steel 1.4301 and similar Min. vacuum pressure: 1 mbar (a) Process pressure : 350 - 700 mbar (a) Nitrogen inlet pressure : 15 bar(g) F2/N2 inlet pressure : 150 bar, alternatively 100 bar Gas mixture 1 10% F2 in N2 Gas mixture 2 20% F2 in N2 as gas mixture MAK values H, HH 0.1 ppm F2, 0.2 ppm F2 Supply voltage 400 V Frequency 50 Hz Connected load, max. 200 kW Back-up fuse 150 A The fluorination plant consists of the following components: Iijdpfsid Ngdjx Ag Usc - A treatment chamber (20m3), into which the plastic material to be fluorinated can be placed in material baskets/boxes suitable for this purpose, - A bundling station for fluorine-nitrogen mixtures Bottle bundles of 12x50 liters for 10% F2/N2 at 150 bar and 20% F2/N2 mixtures at 100 bar, - Amature panel for nitrogen supply of the process flow, - Vacuum pumping station in a container, for conditioning and disposal of the treatment chamber - Heating system for temperature control of the treatment chamber - Control cabinet with a programmable logic controller S7/ WIN CC7 - Operator control station for process monitoring, process parameter setting and the visualized plant picture, as well as the trend control, the error message system, the protocol output, - Al2O3 absorber (silo) Dimensions: Lower unit: vacuum chamber heated, with control cabinet. length: 7500mm width: 2850mm height: 2380mm weight approx. 12.000 Kg Upper unit: pump chamber Length: 4100mm width: 2850mm height: 3000mm Weight approx. 5.000 Kg

Year of construction: 2008, condition: good (used), Grist dust removal + 2 comp. Grav. dosing unit MB Engineering T 250, year: 2008, price: 6.800 €, contact: Mr. Rainer Eckerle Iiedpfx Asd S S Rzeg Usc

Year of construction: 2014, condition: ready for operation (used), Max. output: 370kg/h, connected load: 0.25kW, length: 950mm, width: 950mm, height: 1115mm, weight: 75kg, including automatic filling, frame, valve, inspection shaft and documentation. Iisdpfjh Akm Tex Ag Usc

Condition: refurbished (used), Year of construction: 2009, ø 450-1200 mm PE/PP Central clamping Iodpfx Ajw H Iyfjg Uoic

Year of construction: 2014, condition: like new (used), ø 40-250 mm, central clamping Iijdpfx Ageutc Afo Usc Synchronization of the saw carriage via servo motor. Stroke extension

Year of construction: 2024, condition: new, functionality: fully functional, ø 110-450 mm, wall thickness max. 72 mm Iiedpet A Ufdjfx Ag Uec Servo steel infeed and synchronization. NEW, unused

Condition: good (used), Year of construction: 2019, functionality: fully functional, power: 22 kW (29.91 HP), input voltage: 400 V, cutting height (max.): 1,300 mm, cutting width (max.): 1,800 mm, total length: 8,000 mm, total width: 4,000 mm, table height: 700 mm, feed length X-axis: 8,000 mm, feed length Z-axis: 1,300 mm, feed rate X-axis: 70,000 m/min, saw band speed: 100,000 mm/s, table length: 3,000 mm, table width: 1,300 mm, working height: 700 mm, HEMA CoreCutter 900 from our test center - High-performance horizontal band saw - Ultra-precise slicing of blocks into sheets down to a minimum thickness of approx. 1 mm - Vacuum table for precise workpiece clamping - Dynamic servo axes for maximum productivity - 6 years of operation in the test center - Ideally suited for cutting lightweight construction blocks made from aramid, Nomex, Kevlar, balsa, PET, PVC, PMI, PU, and many more - General overhaul at the manufacturer's facility available upon request Gantry - Steel construction - 2x linear guide units per column - Servo motor with ball screw drive per side - Bellows cover for guides and spindles - Signal tower (red/yellow/green) on gantry control Control System Iiodpfx Agowifxds Ujc - Control cabinet with climate control - Siemens PLC - Frequency-controlled drives - WAGO IO-Link modules - Operator panel with 12-inch screen, integrated into the control cabinet Paintwork - HEMA standard, grey RAL 7031/7047, signal red RAL 3001 Technical Data: - Wheel diameter 2x 900 mm - Table length 3,000 mm - Overall machine length max. 8 m - Cutting width approx. 1,800 mm - Cutting height/vertical stroke approx. 1,300 mm - Cutting height (saw blade – extraction hood) approx. 300 mm - Band drive 400 V, 50 Hz, 22 kW - Continuously variable band speed 500 – 6,000 m/min - Table feed rate max. 70 m/min - Compressed air 6 bar

Condition: refurbished (used), Year of construction: 2015, functionality: fully functional, Mould carrier for polyurethane processing, swivelling universal mould carrier, condition good to very good, including control system and hydraulic unit, clamping area approx. 1250 x 1400 mm, parallel stroke 200 mm, with additional intermediate plate, not part of the offer, opening width 897 mm, swivel angle 40°, dimensions (H x W x D) 2410 x 1863 x 3310 mm, safeguarded by light barriers, inspection possible by appointment, drawings and further technical data available on request. Isdpfx Asxqmnajg Usic

Condition: good (used), Year of construction: 2008, functionality: fully functional, machine/vehicle number: 527, Price for the machine: 214,500 EUR Iodpou Ivc Nsfx Ag Ujic Price for the tools: 97,500 EUR

Year of construction: 2015, condition: used, functionality: fully functional, Epilog Fusion 40 / 120 Watt, laser engraving and laser cutting system - 120 Watt CO2 "WaveGuide" laser source, according to the last service on August 5th, 2024, laser power 132 Watt - Working area 1016X711mm - 2" focus lens - Drive: brushless DC servo motors for crystal-clear cutting edges in acrylic glass - Max. material thickness 362mm - Max. weight of workpiece: 91kg - Laser safety class 2 - Interface: Ethernet, freely programmable IP address - Air assistant on laser beam - Joystick for motorized movement of the axes - Zero position can be changed, machine LED lighting - Large format viewing window made of safety glass - Laser beam expansion, base frame on castors - Honeycomb cutting table - Round engraving unit for cylindrical objects with roller system Extraction: vacair UML 1350 extraction system - Recirculation system with 3 levels -Filter - Filter: particle filter HEPA H14, pre-filter cassette - Activated carbon cassette 43kg (with HEPA) - Fan output 1350 m³/h - Pressure 10,000 Pa - Separation level >99% - Suction/exhaust air nozzle DM 125mm - - Sale only to traders - Exclusion of any guarantee or warranty claims - Sale with invoice and VAT - No liability for spelling errors, typos - Sale as seen, later complaints excluded Machine in very good condition, few operating hours - Machine is very well maintained and clean New prices: Round engraving unit, built in 2019, €1840/net Ijdjvvha Sspfx Ag Uoic Laser Fusion 40 /120 watts, built in 2015, €55,000/net Vacair UML 1350 extraction system, built in 2021, €5,450/net Total: €62,300/net

Year of construction: 2009, condition: good (used), Conveyor belts Arburg, year 2009. Length: 1.4 meters, width: 0.38 m. Iodpfx Agsx Hkqys Usic

Condition: used, Year of construction: 2011, machine/vehicle number: AVZ80-160-315/29264/11-01, Adelmann Umwelt GmbH Rubber shredder Iisdpfouab Dmex Ag Usc

Year of construction: 2026, condition: new, Description: The FR8 flotation tank is designed for density-based separation of plastics in recycling washing lines. The machine separates floating materials from sinking contaminants, improving material purity before further washing, drying, or granulation processes. Suitable for continuous industrial operation 24/7. Materials: PE, PP, HDPE, LDPE, plastic flakes, films Features: Effective density separation (float/sink process) Heavy-duty industrial construction Continuous operation for recycling lines Easy cleaning and service access Ready for integration with pre-washers, friction washers, and dryers Iiodpfx Agsyh Hx Es Uoc 📩 Available in customized configurations. Contact us for details.

Condition: used, Year of construction: 2005, functionality: fully functional, machine/vehicle number: MST-0800C0028, For sale: automatic plastic injection molding machine ATEC HQ-800QL. Year of manufacture – 2005 (04), Serial No. MST-0800C0028. Hydraulic system with digital control panel, suitable for serial production of plastic parts. Power supply 380 V, 50 Hz, 3 phases. Used, fully equipped, previously operated in production. Suitable for manufacturing technical, packaging, and industrial plastic components. Inspection on site possible. Isdox Nhy Rspfx Ag Ujic