Used other printing machinery for sale (133)

Condition: excellent (used), Year of construction: 2015, machine/vehicle number: 0000071163, Type: ALPHA20 HOR Equipment / Additional information: With tank Refix DE (Fabr. No.: 15 P 0316 90633) Hjdpfxeunv Rxj Abgop

Year of construction: 2008, condition: excellent (used), machine/vehicle number: C0851000161, Equipment / Additional information: Ultimate pressure: 150 hPa(mbar) Hodjh Eu Sfjpfx Abgsp Further MACHINERY / SPARE PARTS & MACHINE COMPONENTS of this type are available in our warehouse. ON REQUEST

Condition: excellent (used), THERMAL TRANSFER PRINTING SYSTEM WITH PUNCH (printing, laminating, punching) Equipment / Additional information: Car inspection stickers were last produced Hedpfx Ajvf Ig Djbgjp

Year of construction: 2001, condition: ready for operation (used), A two-color sheet-fed gravure printing press H.C. Moog is available. Paper weight range: 80g-400g/m², max. cardboard weight: 400g/m², max. printing dimensions X/Y: 720mm/1040mm, cylinder diameter: 300mm, max. production speed: 10000sheets/h, printing units: 2, drying stations: 4, gripper fields: 13, UV power: 3×160W, power consumption: 81kW. Includes Heidelberg high-performance stream feeder, Grafix intermediate dryer, intermediate dryer heater, air flotation dryer, UV drying unit, water cooling and cylinder transport trolley. Documentation available. An on-site inspection is possible. Hodpjzcp U Isfx Abgsp

Condition: used, Year: N/A Condition: good Professional electric punching (perforating) machine for binding Technical specifications: - Maximum punching width: max. 700 mm Hodpfozgdgfsx Abgsp - Maximum punching thickness: approx. 4.2 mm (depending on punching tool used) - Performance: approx. 2,400 cycles / hour - Capacity: up to approx. 46,000 punched sheets / hour (80 g/m² paper) - Minimum punching width: approx. 60 mm (foot pedal) approx. 105 mm (micro switch) - Maximum unprocessed edge length: approx. 1,000 mm - Power supply: 400 / 230 V, 3-phase - Power consumption: approx. 3.5 kW - Machine dimensions: approx. 1950 × 770 × 1140 mm - Weight: approx. 325 kg (without tool) Tool Included: - Creasing tool - Round hole punching tool – 2:1 pitch (6 mm) - Split Round Hole Punch Tool – 3:1 Pitch (4 mm) for Calendar Hanger Operation: - Foot pedal

Condition: used, Year: N/A Condition: good Hsdpfx Abozgdcgegsp Technical data: - Maximum wire diameter: up to 38 mm - Working width: 700 mm - Operation: Electric - Power supply: 230 V - Frequency: 50 Hz - Suitable for: Wire-O / twin loop binding - Automatic closing of wire spines - Adjustable closing pressure according to wire size - Robust metal construction - Professional design for printing companies and bookbinding operations

Condition: used, Year: N/A Condition: functional Technical data: - Manufacturer: Karl Krause, Leipzig, Germany - Model: 35B - Serial Number: 187775 - Machine Type: Mechanical Platen Die-Cutting Press - Motor Power: 3.7 kW (5 HP) - Voltage: 220/380 V - Frequency: 50 Hz - Motor Speed: approx. 950 rpm - Construction: Cast-iron frame - Applications: Die-cutting, creasing, perforating, and embossing of paper and cardboard products. Hsdpfszgcw Ajx Abgop Karl Krause Type 35B is a mechanical platen die-cutting press designed for die-cutting, creasing, perforating, and embossing operations in the printing and bookbinding industries. The machine utilizes a moving platen mechanism that applies high pressure against a fixed die, enabling precise processing of paper, cardboard, paperboard, and related materials. The machine is built on a heavy-duty cast-iron frame, ensuring durability, stability, and long service life. Power is transmitted from an electric motor through a flywheel-driven mechanical system. Karl Krause platen presses were widely used in printing houses, bookbinding workshops, and packaging production facilities.

Year of construction: 2008, condition: used, Year: 2008 Condition: functional Technical specifications: Hodpfszf Ilvex Abgop - Manufacturer: GIERLICH Maschinenbau GmbH, Germany - Model: P5000 - Year of Manufacture: 2008 - Serial Number: 10387 - Maximum Stamping Force: 50 kN (approx. 5 tons) - Power Supply: 230 V / 50 Hz - Power Consumption: 1,020 W - Temperature Control: Electronic - Foil Feeding System: Automatic - Worktable: Height-adjustable - Conformity Marking: CE Equipment Description: The GIERLICH P5000 is a professional hot foil stamping and embossing press designed for industrial marking, decorative embossing, and foil stamping applications. The machine enables the application of metallic, pigmented, and specialty foils onto paper, cardboard, plastics, leather, textiles, and other materials. It is equipped with a heated stamping head featuring electronic temperature control, an automatic foil feed system, and a height-adjustable worktable for precise positioning of the workpiece. The machine is built on a robust steel frame that ensures stability and accuracy during operation, providing a maximum stamping force of up to 50 kN. Control is achieved through electronic temperature regulation and mechanical adjustment of the operating parameters. The equipment is suitable for both small-batch and serial production, product personalization, packaging manufacturing, promotional items, and marking of technical components. Applications: - Hot foil stamping, embossing and debossing, marking and decoration of products made from paper, cardboard, plastics, leather, and textiles. Suitable for decorative finishing, branding, packaging production, and industrial product marking.

Condition: ready for operation (used), Year of construction: 1929, functionality: fully functional, machine/vehicle number: Nr. 17575, overall weight: 600 kg, total length: 2,300 mm, total width: 1,400 mm, total height: 2,000 mm, Lithographic press, also known as a rubbing press, for manual printing from lithographic stones. Used by artists for lithographs, in schools, art schools, and museums. The machine was last used in the workshop of the Gutenberg Museum in Freiburg for demonstrations and workshops. Stone format up to 80 x 130 cm. Hjdpfx Aex A H I Dobgep Also very interesting as an exhibit in an entrance hall, restaurant, etc., or for production purposes. Many squeegees in various widths are available as accessories, as well as 4 different hand rollers with leather coverings for inking the stones. The wooden table needs some minor restoration. Please request additional images via private email.

Condition: used, functionality: fully functional, first registration: 11/2024, Year of construction: 2024, We are offering this used LITHEC LithoFlash Inline HBDM XL75 Inpress Control Lithec Heidelberg XL75, year of manufacture 2024. The Lithec system is a suitable alternative to Heidelberg’s InpressControl. Type: LithoFlash® Inline HBDM XL75 Serial Number: GG 0326 Year of Manufacture: 10/2024 The system was removed because the press it was installed in has been sold to Asia, where there is no demand for this system. Inline measurement and control system for offset printing Reduced make-ready times increase job throughput. Significant waste reduction results in direct substrate cost savings. In addition, using a measurement and control system also ensures production quality. Application Areas • For sheet-fed and web offset printing presses with a production width of 52–205 cm • Measurement and control of process ink and special color densities • Monitoring of tone value increase, print contrast, and trapping parameters Customer Benefits • High savings thanks to LithoDyn dynamic control • Minimal energy costs due to flashing LED • Clearly structured, user-friendly interface Hjdpfx Aboyrp Umsgep • Definable print control strips • Effective protection against contamination thanks to innovative glass/visor system • Long service life and low operating costs Measurement Methods and Sensors • Wear-free sensor system with integrated dust and dirt protection • Density measurement in accordance with ISO standards • Parallel measurement of all density channels over the entire print width • Measurement of each sheet • 0/45° optics • Maintenance-free, long-life LED measuring light • Polarizing filter • Measuring range: 0.0 – 2.2 D • Use of existing print control strips possible • Selectable height, width, and configuration of measurement fields (minimum size 3×4 mm) • Strip library for optional use of various print control strips • Reproducibility: 0.01 D depending on measurement conditions • Line speed up to 15 m/s Scope of Delivery • Sensor crossbar • Control unit, industrial PC with 23” touchscreen • For the operation of necessary electrical and mechanical assemblies • Advanced Dust Protection (enhanced contamination protection) • LithoDyn (dynamic control) • LithoJobChange (dynamically controlled job change) • LithoFlash One Shot (measurement and control with press at standstill) Naturally, the system can also be installed on machines other than the XL75, such as: KBA RMGT Komori Manroland If you have any questions or would like further information, feel free to send us a message or give us a call.

Year of construction: 2009, condition: excellent (used), functionality: fully functional, Foliant Gemini 400G Automatic Laminator Fully Automatic Digital Print Laminating Machine. Deep Pile Auto Feeder - 300mm Paper stack capacity Max sheet size B3 (380mm wide) Max production speed 15 m/min ( 1,800 x SRA3 sheets per hour) Built-in compressor for high-pressure laminating rollers. Hodpfsvrd E Ajx Abgjp Auto-control for miss-sheet detection and quality control. Large roll film capacity. (up to 3,000 m) In-line sheet separation. Delivery into a paper jogger 220/240 volt - 50Hz

Year of construction: 2020, condition: refurbished (used), Dryer conveyor for digital direct-to-garment (DTG) printing: ACE 950 by Chiossi & Cavazzuti Hot air dryer for DTG printing like new, excellent condition. Double belt conveyor. Year 2020. Hedpfsr Rn Rvjx Abgjp Textile oven almost new, overhauled and cleaned. Sold new for just over €15,000. Delivery not included - On request Characteristics of the Chiossi & Cavazzuti Ace 950 drying tunnel: - MAX POWER: 14 KW - FIELD OF APPLICATION: Textile digital printing, pre-treatment drying for dark and light textiles, water-based digital ink drying. - DRYING SYSTEM: Warm air circulation - DRYING SURFACE: 2000 x 950 mm - MAX PRODUCTION: 180 pieces/h Possibility of offering a complete set with a DTG Brother, Epson, Kornit printer and a Schulze PretreatMaker IV pretreatment machine depending on availability. Electric Modular Dryer Forced Hot Air System Drying Area: 2000x950 mm Specifically designed to cure and dry digital printing on fabrics, the massive advantage of these dryers is the high volume of forced air circulation: this facilitates and accelerates the evaporation of water-based digital inks with unmatched results on the finished garment in medium-long drying process.

Condition: used, functionality: fully functional, In this offer you purchase a used accessory ‘Konica Minolta LS-506’ Hjdov R Tu Rjpfx Abgjp Object of sale: 1 x Konica Minolta LS-506 large capacity stacking tray: Fits various Minolta production machines Condition: This offer is a used device, which may show signs of use (minor scratches or yellowing). (minor scratches or yellowing). The device has been tested for function Packaging and dispatch: You are welcome to view the device during our business hours. Please make an appointment for this! Seaworthy packaging and worldwide shipping available on request! A function test will be recorded on video for you before dispatch or collection. For further information, you can of course also contact us personally.

Year of construction: 2025, condition: new, The RS-9 shredder has been specially designed for effective processing of various types of papers, taking into account the specifications of the punching machine it will cooperate with. The shredder enables the quick and safe shredding of paper directly received from the die-cutting machine for easy transport via a conveyor system to the baler. Our machine is not only easy to operate but also economical to maintain. It features advanced Siemens control that protects against overload. Additionally, the frequency converter ensures smooth start-up and precise motor control. Hodpfoiklxbex Abgop We also design waste disposal systems from multiple punching machines to one shredder, allowing for fast and maintenance-free material packing into a baler. Feel free to contact us.

Year of construction: 2006, condition: used, Gaemmeler KL 540 Compensating Stacker with attached blocking device VM 500 The compensating stacker KL 540 is equipped with the proven Gaemmerler LiftPack technology. The KL 540 is suitable for bundle heights up to 300 mm. Nummerous options allow to meet the individual customer requirements. Condition: cleaned and ready for production Technical Data: Cycle time ≥ 1,5 sec. (depending on the copy) ≥ 1,2 sec. with Servo pusher (depending on the copy ) Pagination 4 – 96 Heatset / Gravure Formats A 105 – 330 mm (with rear-eject 105 – 310 mm) B 140 – 500 mm D max. 560 mm Layer height max. 200 mm Bundle height max. 300 mm Weight: 1.500 kg approx. Gaemmerler VM500 blocking unit Cycle time: (approx. 6.7 sec) per pack with a pack height of 300 mm and a blocking time of 2 sec. The cycle time per pack increases when the blocking time is increased and the pack height is reduced. The cycle time is also strongly influenced by the output speed of the compensating stacker and thus by the product (surface, format). Sizes: Width: 140 to 500 mm - 5.5" to 19.7" Length: 105 to 330 mm - 4.13" to 13" Pile height: 55 to 400mm - 2.16 to 15.7" Hedpfeh Nrh Uex Abgjp Inlet height: 890 mm - 35" Outlet height: 890 mm - 35" Connected load: 16A (2KW, 380/480 Volt, 3 phases, neutral) Air requirement: 1000 standard l/min, 6 bar; unoiled, dry air Weight: approx. 500 kg

Year of construction: 2026, condition: new, functionality: fully functional, machine/vehicle number: 90301143, Foil cutter for hot stamping foil, max. 840 mm, 610 meters. Rewinding optional. Hodpfx Aboy D H Shjgjp

Year of construction: 2025, operating hours: 10 h, condition: new, functionality: fully functional, machine/vehicle number: 90300934, CLC 600 Hodpfsy D H Rdox Abgep Docter machine Unwind 600 mm Rewind 600 mm

Condition: ready for operation (used), to suit MM 321/335/300- Price £5,000   IN STOCK Hjdpfsir A Ecsx Abgjp

Condition: ready for operation (used), To suit MM 321 saddle stitcher with MM 1532 feeder, Price £5,000  IN STOCK Hedpfeir E Rqox Abgop

Condition: ready for operation (used), Bolt on knife unit To suit a Stahl T50/52 folder- Price £3,000   IN STOCK Hedpfeq U Trhjx Abgsp

Condition: ready for operation (used), To suit a MBO T500, Price £3,000     IN STOCK Hsdsir E R Repfx Abgjp

Condition: ready for operation (used), To suit any saddle stitcher, Price £3,000  IN STOCK Hedjir E R Uepfx Abgop

Condition: ready for operation (used), To suit a MM 227/6 insert line- Price £5,000   IN STOCK Hjdpfxeq U Trde Abgep

Year of construction: 2021, condition: used, Year: 2021 Condition: functional, very good SUMBEL HEROLD 500 – Bookbinding Glue Application Machine Technical Specifications - Power supply: 230 V - Working width: 500mm - Motor-driven roller system Key Advantages - Precise and uniform glue application - Suitable for both cold and hot adhesives - Variable speed control - Robust industrial construction - Long-lasting brass or stainless-steel rollers Hsdpfxjzau Tdj Abgsp - Easy operation and cleaning - Significantly higher productivity compared to manual glue application Machine Description The SUMBEL HEROLD is a professional bookbinding glue application machine designed for the uniform application of adhesive to paper, cardboard, greyboard, book covers, covering materials, cloth, and artificial leather. It is primarily used in the production of hardcover books, laminating and case-making operations, packaging products, photo books, game boards, and various other bookbinding and printing applications.

Year of construction: 2022, condition: new, Lundberg WasteTech 400 All-in-one Unit for Trim Edge Extraction Maximum extraction capacity: 6,000 m³/h (3,540 CFM) Maximum pipe diameter: 315 mm (1’-1”) Maximum extraction distance: up to 30 m (100’) Dimensions (LxWxH): 2615 x 1300 x 3330 mm (8’-7” x 4’-3” x 10’-11”) Weight: 615 kg (1,356 lbs) Extraction fan power: 15 kW (20 HP) Power connection: 3-phase, 230-460V, 50-60 Hz Noise level: 68-72 dB(A) Colour: blue, RAL5010 Including the following accessories: Antistatic unit M5/M6 filter incl. pressure monitoring sensor WT400 frequency converter Bag level sensor TubeBag System (continuous bag) According to the manufacturer, simultaneous extraction from up to 24 trim edges is possible. The unit is in as-new condition and was only operated for a few hours. On-site inspection is possible. Original purchase price of the system approx. €65,000 incl. accessory options. Hodpfey Sbc Rjx Abgop