Used Mandrel tube bending machines for sale (39)

Condition: good (used), Year of construction: 1996, tube diameter 6 - 28 mm wall strength 2 mm bending radius min. 2 x D Control IPU 20 bending radius max. 5,0 x D mm bending angle max. 190 ° Djbu Ufnsvtgn Neweut arbor length 3000 mm operating pressure 180 bar hydraulic motor 4 kW weight of the machine ca. 900 kg dimensions of the machine ca. 3,8 x 1,1 x 1,3 m Semi-automatic electro-hydr. mandrel tube bending machine with PLC control for 20 angles and display in the control panel for bending angle specification, angle detection and angle measurement via absolute value encoder, autom. tool plate reset, Turning device with digital display, hydr. quick chuck, aut. Mandrel lubrication, adjustable length stops. Operating modes: MANUAL and semi-automatic. Control buttons: hydraulics on / off, operating mode selection, clamp to / on, clamp forward / backward, mandrel forward / backward, bending forward / backward /, locking forward / backward, mandrel lubrication, turning device forward / backward, plate reset, length stop forward, emergency stop. The machine comes from a prototype construction and was only used a little until 2000. After that, the machines of this department were sold. However, the purchaser did not use the pipe bending machine and therefore it has only stood in the warehouse and has not worked since then ((original paint). Please notice that the price of a new machine today is over € 60.000,--. Machine dealer with own stock of 1600 m².

Condition: used, Year of construction: 1999, Functionality: fully functional, machine/vehicle number: .15.006, bending radius: 36 mm, bending angle: 45 °, We are offering our Transfluid DB2060K mandrel bending machine for sale. Pickup only. Duebu Ujwhulqsfnwst We are happy to assist you with any questions.

Condition: good (used), Mandrel pipe bending machine, LANG type EL 45 Technical data: for pipe diameter 45 x 2 mm Mandrel holder length 2,000 mm Bending speed for 90° approx. 3 s Dsbsqff E Eju Ufnwjut Electrical connection 380 V, 2.2 kW Weight approx. 1000 kg with tool: 16 x R 76 22 x R 76 28 x R 75 35 x R 105

Condition: used, Year of construction: 2017, thorn length: 4,500 mm, pipe diameter: 80 mm, Mandrel bending machine S8004 ----- For the production of dimensionally accurate pipe geometries with bending radii of up to 1.5XD → maximum bending performance pipe 76 x 4 mm (400 N/mm²) → maximum bending performance pipe 60 x 60 x 3 mm (400 N/mm²) → maximum bending performance pipe 76 x 2.9 mm (stainless steel) → total connected load 7 kW → pipe length 4.5 mtr Robust and durable steel construction in a force-locking connection - no construction susceptible to torsion due to, for example, the split construction of the bending head and mandrel carrier. Maintenance-free electromechanical drive of the bending axis. The touch display of the control enables simple and intuitive programming and use of the system. After the pipe has been pushed on, it is fixed in the carriage by the chuck. This enables the pipe to be positioned precisely and thus the creation of dimensionally accurate geometries. The standard also includes checking the pipe geometry before the bending process: If the bending process is started in the wrong position, the machine does not give permission for this. This prevents incorrect operation. Optional additional features provide more convenience and increase the output and thus the efficiency of the system. Data is exchanged from the optional pipe calculation program TBS-3D (PC version) via USB stick or via FTP access from the computer to the machine control system. USB or LAN connectors (RJ45) are available as standard. Existing pipe geometries can be converted quickly and easily, for example, using the STEP format. Djbusttah Rs Ufnwjut Standard equipment: → Electromechanical drive of the bending axis 4 kW → Speed 2.9 rpm (=17°/sec.) → Bending direction left → Bending angle resolution 0.1° → Max. bending radius 200 mm → Bending shaft diameter 50 mm → Electronic length measurement ±0.1mm → Electronic twist measurement ±0.1° → Manual stop system (overtravel stops in length) → Manual locking system (15° in twist) → Three-jaw chuck for locking the pipe in the carriage → External control panel PLC control: → Touchscreen 10.1" → ETH 10/100, X2X Link, USB → Foot switch operation → Data transfer via network (W)LAN or USB → Material database Unique graphic programming: Simple geometries can be calculated directly on the machine. The control calculates the feed values directly after entering the length and angle and the bending angles. Hydraulics: → Hydraulic power 3 kW → Hydraulic pipe clamping with adjustable clamping pressure → Programmable early mandrel retraction Options (can be ordered as additional equipment): → Variable bending speed using frequency converters or servo motors → Automatic tool retraction (manual or controlled) → Pneumatic chuck → Automatic mandrel lubrication → Pneumatic stop system (length + twist) → Mobile version (rollers) → Radius extension Pictures show new machine

Condition: excellent (used), Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 514, thorn length: 6,000 mm, bending radius: 200 mm, bending angle: 190 °, wall thickness: 5 mm, type of input current: three-phase, total width: 900 mm, total length: 8,000 mm, total height: 1,200 mm, overall weight: 2,000 kg, pipe diameter: 50 mm, input voltage: 400 V, pipe length: 6,000 mm, power: 7.5 kW (10.20 HP), Beautiful CNC tube bending machine. Hardly used in recent years. Will be delivered serviced. Large selection of bending tools. Duobjtuqfreu Ufnwjt

Condition: used, Year of construction: 2007, tube diameter 6.0 - 50.0 mm wall strength max. 4.0 mm ST bending angle max. +/- 180 ° bending radius min. 1.5 x D mm bending radius max. 10.0 - 140 mm Control JUTEC SPS voltage 400 V total power requirement 6.5 kW weight of the machine ca. ca. 650 kg dimensions of the machine ca. 3650 x 1000 x 1150 mm Good / well-maintained condition (!!) Description / Area of ??application: - Hydraulic piping / pipeline construction / plant engineering / metal Dujbsv Nq R Heu Ufnwjt construction / prototype construction - Mandrel bending machine for pipes 6.0 - 50.0 mm - Max. wall thickness 4.0 mm - e.g. hydraulic piping .. max. 42.0 x 3.0 mm Equipment: - Electro-hydraulic mandrel tube bending machine (SEMI-AUTOMATIC) - Including JUTEC NC-PLC control unit * Movable control panel * Data storage for up to 200 programs * For bending angle + length measurement and twist angle * Up to 30 bending sequences programmable for one pipe length * A database is available for monitoring springback values. * Available for various materials - Pipe length/usable length .. 3000 mm - Clockwise bending direction - With mechanical clamping device - Automatically clamps during the bending process - Standard cylinder - Standard hydraulic components - Movable machine (mobile base frame) - Feed carriage including 4-jaw chuck - Many JUTEC bending tools including mandrel bars - 1x freely movable 3-position foot control - Operating instructions (PDF) Bending segments: D 41 mm . R 123 mm D 35 mm . R 115 mm D 29 mm . R 60 mm D 23 mm . R 50 mm D 19 mm . R 40 mm D 13 mm . R 40 mm D 10 mm . R 40 mm

Condition: new, Capacity, Ø mm ----- 57 x 2 Radius, min/max ----- 20/250 Radius difference ----- 50/230 Bending speed/repeatability ----- 230º/s. ±0.05 Length of mandrel ----- 1 000-∞ Weight ----- 5000kg Machine dimensions ----- 3.0 x 1.6 x 1.5 Tube rotation ----- 0-360°/sec Length feeding ----- 0-1800 mm/sec Degree of tolerance ----- 0,05°/mm Djbuega T E Ae Ufnwjut Standard components conform to VDMA, ISO and DIN standards OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: good (used), Year of construction: 1995, - Hydraulic cylinder and roller chain drive Duebujwhdxms Ufnwst - Tube range 4-28 mm - Bending angle 190° (without tube) - Bending radius 1.5 x D - 2.0 x D - Nominal pressure 250 bar - Operating pressure: 3005 mm n.r. - Delivery rate 4.5 l/min

Condition: new, Year of construction: 2025, THE ECONOMICAL MANDREL BENDING MACHINE FOR TIGHT BENDING RADII. For tube dimensions from 20 - 90 mm, this bending system offers solutions for complex geometries with standard radii of 2xD. Depending on material quality and wall thickness ratio, radii of 1.5xD can also be realized suitable for series production. With a tool height of 120 mm, there are also sufficient options for special profiles. Dobuenh R Sus Ufnwsut The extremely precise and powerful electric drive of the bending axis as well as the stable and rigid construction of the mandrel carrier and the bending arm also contribute to the desired bending result. The plug-in bending tools allow a quick changeover to other tube dimensions. The clamping pressure for the tube clamping can be optimally adjusted. The PLC control (can be expanded as required via USB stick) with data memory and the latest X2X interface can accommodate an almost unlimited number of programs for bending angle, linear dimension and twisting angle for a maximum of 50 bending sequences on one tube length. A freely programmable database for up to 200 materials is available for monitoring springback values. The control system has 2 operating modes: In "Simple Bending", the length and twist of the bends relative to each other are automatically displayed. In the "Controlled bending" mode, the data is stored beforehand and a permanent target/actual comparison is performed during bending. Also available with pneumatic rotation stop or with gear-assisted length and twist positioning. POSSIBLE AREAS OF APPLICATION: - Plant engineering, e.g. chemistry - hydraulic piping - metal construction- prototype construction- pipeline construction TECHNICAL DATA: Bending capacity 7000: Ø 20 to 70 x 5 mmbending capacity 9000: Ø 20 to 90 x 5 mm depending on the material- bending radius min/max: 40 mm/250 mm- Bending radii min: 1.5 x Ø (standard 2 x Ø ) - Multifunction machine control Bending angle adjustment (0,1°) - Mandrel support lengths 3000/4500/6000 mm - Maximum 180º bending result - Weight 1600-3200 kg (depending on version) - Ergonomic operation via safety foot switch OPTIONAL ACCESSORIES: - Automatic mandrel lubrication (minimum quantity) - Pneumatic or hydraulic quick chuck - Larger bending radius up to 300 mm - Positioning of the length and twist via automatic brake function or via manual stops by foot switch - Semi-automatic positioning of the length and twist via servo motors - Automatic tool retraction - Pipe calculation software - 10 inch touch screen with integrated tube calculation - Data transfer via cable (LAN), via radio (WLAN) or USB OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing purchase via - the company JUTEC - Service contracts, maintenance at your site

Condition: used, Year of construction: 2012, tube diameter 51 mm wall strength 3 mm semi-automatic operated UZMA bending radius max. 225 mm bending angle max. 190 ° bending speed 35 ° / sec. mandrel length 3.100 mm engine output 5,5 kW voltage 380 V total power requirement 11,0 kW weight of the machine ca. 1,36 t dimensions of the machine ca. 4,20 x 1,60 x 1,20 m - Serial No.: 0144 - semi-automatic mandrel bending machine - bending angle is program controlled - length + twisting angle manually adjustable - digital display for twisting angle, length and bending angle - the following bending sets are included: 1.) R75 mm / Ø 20 mm 2.) R60 mm / Ø 25 mm 3.) R75 mm / Ø 30 mm 4.) R75 mm / Ø 40 mm 5.) R170 mm / Ø 50 mm 6.) R35 / flat Material 40 x 10 mm Dobu Ufnepunglowsut

Condition: new, Year of construction: 2024, tube diameter 60 mm wall strength 3 mm bending radius min. bei 2,5 Wandst. 170 mm arbor length 3000 mm total power requirement 5,5 kW Dobu Ufjvfhilonwout range L-W-H 3,8 x 1,3 x 1,35 mm The ETM-H range of semi-automatic hybrid tube bender is ideal for the machining of thin tubes without deformation of the processed tube: a compact, high- performance and economical solution. In semi -automatic bending machines of the ETM-H series, the bending function isperformed automatically, while the feeding and rotation of the tube between the curves must be performed manually. Simplicity, sturdiness and precision are the key features of this particularly cost-effective line. These bending machines are particularly used for the production of medium-small sized batches, for adaptation and maintenance work or as mobile bending machines on site. When machining tubes with multiple curves, the manual positioner will greatly facilitate the work, as this device allows the exact fixing of the length of the tube and the rotationposition between the curves. As standard supply, this electric bending machine is equipped with a hydraulic mandrel extractor, hydraulic clamp die and pressure die, thus ensuring an excellent quality bendfinish. Our ETM-H semiautomatic hybrid bending machines can bend tubes with a diameter up to 90 mm diameter with maximum quality of finishing. Other machines in sizes: 50, 80 and 90 mm. GENERAL FEATURES - Electronic Control “Digital Bend Program Plus” - Carbon steel frame - Adjustable pressure dies - Programmable advance mandrel extraction for optimized bending quality - Interchangeable shaft for small bending radii - Variable bending speed - Positioner for tube length and rotation, incl. 3-jaw spindle (optional) - Available pipe lengths: 1.5; 2.5; 4.5; 6 m. - Counter pressure die with automatic return - Mandrel lubrication system (optional) - Length and rotation measuring system with digital display. Bending tools for different pipe diameters on request.

Condition: used, Year of construction: 1991, tube diameter 6 - 18 mm 180 ° 1500 mm Dsbuov T Nq Ho Ufnweut weight of the machine ca. 0,55 t dimensions of the machine ca. 1,6 x 0,8 x 1,2 m

Condition: new, Capacity, mm ----- 25 x 2 mm Radius, min/max ----- 10/100 mm Radius difference ----- 90 mm Bending speed/repeatability ----- 500º/s. ±0.05 Tube length ----- 1 350 ∞ mm Weight ----- 2200 kg Machine dimensions ----- 3.0 x 1.2 x 1.3 m Tube rotation ----- 0-850°/sec Length feeding ----- Standard 0-2 400 mm/sec Booster ----- 0-1 200 mm/sec Degree of tolerance ----- 0,05°/mm Bending head rotation ----- 0,75 sec Standard components conform to VDMA, ISO and DIN standards. Dusbu Ufjga T Exenwot OPTIONS * Online connection with CAD system and measuring machine * Automatic tube magazine with free programmable robot or loading arm arm * Weld seam detector and tube positioner electromagnetic or optic detection * Free radius bending * Simulation/Collision Control * Bed length extension

Condition: new, "Properties: Bending radii: R36 to R190 (min. R= 2xD) Max. Bending speed: 2.8 rpm Control: digital Number of programs: 1 Dimensions (W x H x D): 245 x 300 x 320 mm Weight: 23 kg Portable Power: Hard copper and aluminum : 42 x 1.5 mm Steel tube : 38 x 1.5 mm Stainless steel : 35 x 1.5 mm Solid material : 20 mm Djbu Ueuudi Aefnwsut Scope of delivery MD070M Standard accessories (e.g. foot switch, operating instructions)"

Condition: new, Year of construction: 2025, machine/vehicle number: 1018, THE MANDREL BENDER WITH MANUEL CLAMPING: This mandrel bending machine with manual eccentric quick clamping for tube fixing enables rational bending. The compact drive unit with the detachable mandrel carrier offers advantages when used at the assembly site. Optimum bending accuracy is achieved by position detection directly on the bending axis. The bending angle is set easily and quickly via a convenient touchscreen control with menu-driven user interface. The comfort control allows two speeds as well as a parameterizable overbending function to compensate for material springback. The bending sequence is significantly shortened by automatic "free travel" at the end of the sheet. For more complex bending tasks, bending programs can be stored with a maximum angle sequence of 50 bends per geometry. An almost unlimited number of programs can be stored on the control or a USB stick, as well as 200 materials. The plug-in bending tools allow rapid conversion to other tube sizes. For difficult geometries, the bending direction of the machine can be changed to right or left bending as standard. The open bending unit allows, for example, the bending of railing frames with only one weld seam. The optional calculation software on the PC determines the cut length for the entire geometry as well as the travel distance, twisting angle and bending angle for each bend. The mandrel retraction is programmable and can be retracted automatically ahead of time when a bending angle is reached. POSSIBLE APPLICATIONS: - Plant engineering, e.g. chemical industry - hydraulic piping - prototyping - Pipeline construction TECHNICAL DATA: - Bending capacity Ø 6 to 50 mm - bending radius min/max: 10 mm/140 mm Duebu Ufonfvy Uenwot - Bending radii 2 x D - multifunction machine control bending angle adjustment (0,1°) - mandrel beam lengths 1500/3000/4500/ 6000 mm (special version also longer) - Maximum 180º bending result - Weight 300-500 kg (depending on version) Optional accessories: - Automatic mandrel lubrication (minimum quantity) - Digital displacement measurement for length and twist (resolution 0.1 OUR SERVICE: - Welcome to the test production in our house in the demo room - Consultation and information meeting at your site - Consultation and handling as leasing/financing-purchase via the company JUTEC - Service contracts, maintenance at your site

Condition: good (used), Year of construction: 1998, Functionality: fully functional, thorn length: 1,200 mm, bending radius: 600 mm, wall thickness: 8 mm, Transfluid DB 40100ST Mandrel bending machine Tube bending machine The above machine is a mandrel bending machine designed exclusively for the production of tubes and profiles with an outer diameter of 40-100 mm, max. 110x5 mm with a max. wall thickness of 8 mm or for the processing of solid materials with an outer diameter of up to 70 mm. Pipe push-on length/usable length: 1200 mm Radius range max:600 mm Dusbuor H Havs Ufnwjt Bending height:1200 mm Machine data Length:4000 mm Width:2600 mm Height:1400 mm Weight:9000 kg

Condition: like new (used), Year of construction: 2024, Functionality: fully functional, Manual length and angle positioner for 6000 mm pipe length Dujbu Uov Tz S Ajfnwjt The bending capacity can be found in the attached technical documentation in PDF format.

Condition: new, Year of construction: 2021, Functionality: fully functional, machine/vehicle number: 40793, bending angle: 90 °, type of input current: AC, pipe diameter: 28 mm, Tube flanging machine, new and unused still in original packaging. Surplus to requirement suitable for flaring and flanging pipework to 28mm diameter. Complete with 18x1mm and 19 x 1.2mm flanging dies. cycle time is 4-10 seconds. Capable of processing tube diameter up to 2.5mm wall thickness. Dobu Uotq Ai Djfnwout

Condition: used, Year of construction: 1999, Hydraulic mandrel bending machine Max. usable length: 4500 mm For pipe diameters 6-50 mm With automatic control No tools available Weight: approx. 1200 kg Dobu Uevxt I Tefnwout

Condition: new, "Bend speed: programmable for every bending anglevariably up to 1 rpm Duobu Ufeuudg Ijnwst Control: 7“ and 4,3” touch-screen with oicons Number of programs: unlimited by USB interface LAN or W-LAN connection (optional) Right/left bending (with special tool) possible Depending on machine type: Dimensions, weight, bending radius and bending capacity"

Condition: used, Year of construction: 2001, operating hours: 100 h, Functionality: fully functional, thorn length: 4,500 mm, total width: 1,500 mm, total length: 6,000 mm, total height: 1,500 mm, overall weight: 3,500 kg, pipe diameter: 80 mm, Fully automatic pipe bending machine for D80x4 mm steel pipes. Very few operating hours. Control in any language. Runs perfectly. Tools for D50+D60 mm available. Djbu Ufnsv E R S Nsweut

Condition: used, Year of construction: 1997, tube diameter 60 mm wall strength 6 mm bending radius min. 180 ° total power requirement 5,5 kW weight of the machine ca. 1300 kg dimensions of the machine ca. 3500 x 1250 x 1300 mm Dobu Uet I D Uxefnwjut Description: Round tube steel (S235): 60.0 x 6.0 mm Round tube stainless steel (S 355): 60.0 x 4.0 mm Square tube steel: 50 x 50 x 4.0 mm Rectangular tube steel: 60 x 40 x 2.0 mm max. usable length: 3048 mm Bending speed: 10°/sec including tools (see photos) Mandrel is no longer available, can be retrofitted

Condition: used, Ring bending machine, profile bending machine, bending machine, pipe bending tool, tube bender, tube bending machine, mandrel bending machine -Mandrel bending machine: mechanical profile bending machine -Accessories: see photos Djbsh S Ti Eeu Ufnwjut -Total dimensions: 1200/740/H1220 mm -Weight: 169 kg

Condition: new, "Properties: Bending radii: R10 to R200 (min. R= 1.8xD) (depending on the wall thickness, the material and the pipe diameter) Max. Bending speed: 2 rpm and 3.2 rpm without inverter Operation: NC soft-touch control panel in 8 different languages and foot pedal Number of programs: 30 per 9 bends Control: NC1 Bending direction: counterclockwise Effective length (available in different lengths as required): 1,5 / 3 / 4 / 6 m Dimensions (W x H x D): 1000 x 1500 x 3600 mm (length for 3 m version) Duobu Uouudrkefnwst Weight: approx. 600 kg (with 3m mandrel) NOTE: The price quoted refers to a length of 1.5 m. Other lengths available on request! Premature mandrel retraction Positioning and rotation with mechanical stops and precise digital display Pneumatic four-jaw chuck Performance: Hard copper and aluminum : 60 x 4 mm Steel tube : 60 x 3 mm Stainless steel : 60 x 2 mm Scope of delivery: Machine Standard accessories (e.g. foot switch, operating instructions, 2 hex, 4 sets of chuck jaws, bending grease, 25 mm mandrel bar) Delivery without hydraulic oil"

Condition: used, Year of construction: 2014, tube diameter 60 mm wall strength 3 mm bending radius min. 2 x Rohr-Ø ÷ R200 mm bending angle 0 - 180 ° Dobuoivqrbj Ufnwjut gas tube pipelines 2" (60.,3mm) mm speed stufenlos 0,5 - 2,0 total power requirement 1,5 kW weight of the machine ca. 0,7 t - Powerful mandrel bending machine up to 2 "gas pipe (60.3mm) in semi-automatic design (6000 mm pipe slide length) - Electromechanical drive of the bending axis - hydraulic clamping - mandrel feed / extract - 30 programs x 9 bending angle + correction angle