Condition: as good as new (ex-display), Exhibition machine The Holzprofi dehumidifier HT-100 is ideal for drying wood. Dcjlragjvrvmxjk Ieg The dehumidifier can also be used for drying cellars, construction sites, etc. Advantages and features: - High drying performance even at low temperatures, thanks to hot gas defrosting - Good dehumidification even at low humidity - High efficiency for energy-saving operation - High-quality machine from the industrial sector, durable and suitable for many purposes. - The practical control switches the dehumidifier off automatically when the desired humidity is reached. - Direct hose connection to drain large amounts of water without any problems Suitable for most soft and hard wood types such as spruce, beech, ash, as well as exotic woods and firewood. Due to the high tannic acid content, oak is conditionally or not recommended - as with other dehumidifiers. Technical data: Nominal power consumption: 1050 W Max. power consumption (35°C, 95% R.H.): 1480 W Air flow rate: 1100 mc/h Coolant: R410a (environmentally friendly) Operating range (temperature): 1-35 °C Operating range (relative humidity) T

Condition: used, Year of construction: 1994, machine/vehicle number: 516, Capacity 630/250mm Dcolragjqv Rx Sek Iog 4 irons 7.5KW motor Digital display Electric rise and fall Speed variator 6-20m/min Voltage 380V

Year of construction: 1999, Condition: ready for operation (used), Working width: 230mm, working height: 160mm, number of spindles: 6, spindle diameter: 50mm, spindle power: 4x 5.5kW/2x 11kW, feed rate: 24m/min, input table length: 3000mm, vertical spindle axial stroke: 80mm, horizontal spindle axial stroke: 45mm. Connected load: 126kW, air requirement: 8400m³-9600m³/h, machine dimensions X/Y/Z: approx. 3500mm/2000mm/1800mm, weight: approx. 3500kg. Including Weinig EM-11 slide-in unit and suitable distributor for the extraction system. Documentation available. On-site inspection is possible. Dcoleu Damdjragk Ieg

Condition: good (used), WEINIG Quattromat four-sided planer max planing width 220mm max planing height 120mm 4 heads, heads included Djlraov Hqn Tsgk Iscg bottom spindle - 4KW, right and left 7.5KW, top - 5.5KW feed on cardan shafts with smooth adjustment electric lifting up and down electric adjustment of planing width branded machine preserved in good condition

Condition: used, Year of construction: 1991, Working width: 500 mm Planing shaft: Centrolock Number of knives: 4 Planer table length: 2800 mm Dressing table adjustment: Lever Display of chip removal: Scala Dressing fence angle adjustable: yes Dcolragsvadxrsk Iog Motor power: 5.5 kW Machine length: 2800 mm Machine width: 1000 mm weight: 900 kg

Condition: like new (used), REX HOMS-410 four-sided planer - German manufacture - for wet wood TECHNICAL PARAMETERS: planing width max 410 mm Dcolragkjrwl Dbs Isg planing height on both sides 200 mm planing height on four sides 200 mm diameter of spindles 40 mm power of spindle motors 2 x 11 kW power of spindle motors 2 x 5.5 kW feed speed continuously adjustable feed speed inverter regulated three top pulling shafts three bottom drawing shafts two auxiliary shafts in the worktop brake minimum workpiece length 450 mm machine overall dimensions (length / width / height) 250 / 220 / 180 cm weight ~ 3500 kg

Condition: excellent (used), Year of construction: 2015, Weinig Powermat 2400 moulder with 7 Spindles. (Year 2015) Delrsv Uwmxsagk Ijcg 50mm spindles 6,000 RPM (Not Powerlock) Bottom 15 kW + outboard bearing Right 11 kW + Straight jointer Left 11 kW + Straight jointer Top 15 kW + Straight jointer + outboard bearing Bottom 18.5 kW + Profile jointer Top 18.5 kW + Straight + Profile jointer Bottom 18.5 kW Straight jointer + outboard bearing 11kW feed motor Automatic lubrication system. Electric digital display memory system. Possible to supply with Weinig moulder infeed and outfeed

Condition: used, Year of construction: 2008, machine/vehicle number: 08880472, Width 510mm Table length 285cm Tree 4 sharpening irons Dolragerr Hn Sek Iscg Tree protector 5.5kw motor Voltage: 380V

Condition: excellent (used), Year of construction: 2011, Functionality: fully functional, WEINIG Unimat 500 - 5 spindles - planing width max. 230 mm - Planing height max. 120 mm - Feed electronically frequency-controlled 5-30 m/min. - Feed motor 4 KW - 1st spindle bottom 5.5 KW - 2nd spindle right - motor right / left 11 KW - 3. spindle left with electric axis adjustment FORWARD - BACK - 4. spindle top 7.5 KW with electric axle adjustment HIGH-LOW - 5. spindle bottom 5.5 KW - Spindle speed 6,000 rpm. - Spindle diameter D=40 mm - Dressing table 2,000 mm with jointing ruler - Infeed roller in front of 1st lower tool pneumatic, high-low controlled - Lateral pressure roller in front of the left spindle, moving and spring-loaded - Pneumatic pressure roller - Driven rubber roller in the outfeed table - electronic digital displays to 1/100 mm - Manual lubricant pump - Central positions of the lubrication points - GRP safety hood - interior light in the safety hood - Total connection approx. 36 KW 2x radial CNC-controlled adjustment: - Positioning of the spindle in conjunction with the memory function for spindle no. 3 + 4 Memory system: - For saving the setting values of profiles - Spindle axes with electronic double displays Functions: - Save the setting values of the finished profile under a profile number at the touch of a button - When the profile number is selected again, the electronic double displays show the setting values - The displays are brought into alignment by manually adjusting the spindle - 99 memory locations Dimensions: - Length 3,320 mm (3,620 mm discharge hood) Dcelstqd Nworagk Ieg - Width 1,710 mm - Height 1,850 mm Machine technically and optically in very good condition Price: by arrangement Payment: net cash before loading Delivery time: approx. 2 - 3 months All changes, errors in the technical data reserved. No guarantee on printed data. Subject to errors and prior sale.

Condition: excellent (used), 4-knife shaft for traditional knives two adjustable tables length of tops 3050mm planing width 630mm 5 kW motor Dolragjv H U N Ujk Ijcg adjustable ruler 0-45°

Condition: ready for operation (used), Year of construction: 2001, Functionality: fully functional, working width: 230 mm, working height: 120 mm, jointer table length: 2,500 mm, number of spindles: 6, 4-sided planer TECHNICAL DETAILS Number of spindles: 6 Sawing unit: horizontal (glazing bead saw) Spindle arrangement: bottom / right / left / right / top / bottom Saw unit power: 2.2 kW Spindle power: 5.5 / 7.5 / 7.5 / 5.5 / 7.5 / 5.5 kW Working width: 20 - 230 mm Working height: 8 - 120 mm Spindle diameter: 40 mm Dcolragjualg Eek Ieg Dressing table length: 2.5 m Feed rate: 5 - 24 m/min, 4 kW Waxilite pump: manual Rollers in machine table: 2 pieces, driven

Condition: good (used), WEINIG PROFIMAT 22N four-side planer - DTR - German production - adjustable spindles TECHNICAL PARAMETERS: planing width 220 mm planing height 120 mm spindle diameter 40 mm 1) 4 kW lower head 2) right head 3) 5.5 kW left head 4) 4 kW upper head 5) universal head 360 ° 4 kW 2.2 kW feed motor feed speed 5 - 20 m / min four upper drawing steel rollers two upper pulling rubber rollers one pull roller in the table top feed on cardan shafts electric height adjustment pre-table length 1970 mm Dcslreh Akbasagk Iog central lubrication pneumatic clamps dimensions of the machine (length / width / height) 380/200/170 cm weight ~ 2000 kg

Condition: excellent (used), Year of construction: 2010, Weinig Powermat 500 (6 spindle + Universal) CNC position adjustment. 4798 work hours Machine number 114015 (2010) 160mm x 230mm. All 7 spindles Powerlock, 8,000 RPM Dslragkjv Uwmro Iecg Bottom 7.5 kW Right 11 kW Left 11 kW Top 15 kW Top 15 kW Bottom 7.5 kW Universal 7.5 kW 5,2kW feed motor 30m/min feed speed. 2m infeeed table. CNC positioning on spindles 2,3, 4, 5, and 7. 3 way CNC positioning on the universal spindle. Powercom Plus. Possible to supply with automatic infeed and outfeed if needed. Possible to supply with complete handling solution with stacker if needed.

Condition: used, Year of construction: 2012, machine/vehicle number: 12E000017100300, Composition: 7 positions including 1 universal Capacity 230mm/160mm Chrome table Table lubrication Training rollers in the wet wood table Dolrajtvxclogk Iscg Motor power: M1-M2-M3-M7=5.5kw M4-M5-M6=7.5kw Advance speed from 6 to 30m/min Voltage: 380V Weight: +- 5,400kg

Condition: used, Various planing heads for the Weinig Unicontrol. Bore 40 mm. Dcolrjvzud Uoagk Ieg

Condition: excellent (used), max planing width 770mm Dcjlov H U Nbsragk Isg max planing height 200mm additional 5 spindle 220mm

Condition: excellent (used), Technical data: Max planing width: 230 mm Max planing height: 130 mm Spindle diameter: 40 mm Number of spindles: 5 1, 4, 5 spindle on a separate engine 2, 3 spindle on one engine Number of upper steel pulling rollers: 4 Number of upper rubber pulling rollers: 3 Diameter of the extraction nozzle: 100, 110, 140 mm Smooth feed adjustment: Feed on cardans Work table lubrication pump 1 smooth roller in the table top Pressure: 6 atm. Electric lifting of the body Power supply: 400 V Total power: 35 kW Overall dimensions: Length: 4860 mm Width: 1640 mm Height: 1670 mm Dcslraov Tyg Esgk Ijg

Condition: like new (used), Weinig Hydromat H22N four-side planer - German production - DTR - year of production 1992 - two rollers in the tabletop, milled before the first head - for wet wood TECHNICAL PARAMETERS: - planing width 220 mm - planing height 140 mm - spindle diameter 50 mm 1 lower head 7.5 kW 2 legal head 7.5 kW 3 left head 11 kW 4 upper head 7.5 kW 5 lower head 11 kW hydraulic feed pump motor power 15 kW feed speed smoothly adjustable up to 60 m/min feed on cardan shafts electric height adjustment pneumatic pressure five pulling rollers in the countertop eight steel upper pulling rollers one upper rubber pulling roller rests on horizontal spindles jointer on the lower spindles Dolragkjpvi Sks Iecg Transport dimensions 500x200x160 cm weight 4 tons

Condition: new, Working width 318 / 295 mm Working height 170 mm Motor output 2,25 kW Length of the planing table 1300 mm Number of knives 3 St. Feed speed 5,3 m/min. Dcelragou Imn Njk Ieg Dust suction hood 100 mm connected load frequency 400 V machine weight ab. 160 kg Dimensions (L/W/H) 1150 x 530 x 930 mm The planer and thicknesser is delivered almost fully assembled. For thickness planing, the same connection is used for suction as for surface planing used. However, this is placed upwards over the storage table.

Condition: used, Year of construction: 2011, machine/vehicle number: 0803078, Capacity 230/150mm 4 positions Chrome table Training rollers in the table Table lubrication Centralized lubrication Control panel Electronic speed variator Engine brakes Voltage: 380V Dslrervqd Njagk Iocg

Condition: good (used), Year of construction: 1988, WACO HM 200 moulder with splitting unit in the end of machine. Max. working width/high : 200 x 120 mm Spindle diameter : 45 mm Max. infeed speed : 60 mtr/min Moulding heads with 6 knives Spindle configuration : 1. buttom 11 Kw 2. Top 11 Kw Delraour Nk Hegk Ijcg 3. Right 7,5 Kw 4. Left : 7,5 Kw Splitting unit : 5. Right saw 37,5 Kw 6 Left saw 37,5 Kw Lots of extra tools, heads + sawblade boxes

Condition: excellent (used), Weinig Profimat 23 four-sided planer Working width 230mm Working height 120mm Number of spindles 6 Bottom 4kw Right 7.5kw Left Dcslov Ealreragk Isg Top 7.5kw Bottom 4kw Universal 5.5kw Spindle diameter 40mm Working speed 24m/min Pneumatic pressure of the pulling rollers Electric adjustment of the pressure wheels Drive on cardan shafts CE certificate

Year of construction: 1982, Condition: good (used), width 630mm length of the tops about 2500mm culaga adjustable at an angle and top and bottom Delroimd Ibeagk Ijcg table adjustable up and down manually machine ready to work, technically in good condition,

Condition: used, Width 500mm Dcjlrajr Iqiujgk Ieg 2 rollers in the table Manual up and down 7 hp engine 380V

Condition: used, Width 500mm 4 irons Tree protector 5.5hp engine 380V Dsljr Iqiqsragk Iecg