Condition: excellent (used), Catalogue number 7951 TECHNICAL DATA - Shaft width: 640 mm - Number of knives: 3 pcs - Max thickness of workpiece: 250 mm – Upper section: - Kickback pawls/anti-kickback fingers - Serrated infeed roller, driven - Pressure bar - Planing shaft - Pressure bar - Smooth outfeed roller, driven – Lower section: - Adjustable rollers in the lower table: 2 pcs - Motor: 7.5 kW - Electric table lifting - Lifting motor: 0.75 kW - 4 feed speeds - Feed motor: 1.5 kW - Dimensions (L/W/H): 1250x1140x1200 mm - Weight: 1070 kg ADVANTAGES – Made by Polish manufacturer JAROMA – Electric table lifting – DTR technical documentation – Used thicknesser/planer, in very good condition Net price: 20,900 PLN Net price: 4,980 EUR, based on an exchange rate of 4.2 EUR Dcodpfsyy Rm Ujx Aaaof (Prices may vary with larger fluctuations)

Condition: excellent (used), Catalogue No. 6747 TECHNICAL DATA Dedpfox Rquajx Aaaocf - Maximum planing width: 170 mm - Maximum planing height: 130 mm 7 spindles: 1) Bottom horizontal spindle: 170 mm, 4 kW 2) Right vertical spindle: 130 mm, 5.5 kW 3) Left vertical spindle: 130 mm, 5.5 kW 4) Additional right vertical spindle: 130 mm, 5.5 kW 5) Top horizontal spindle: 170 mm, 4 kW - 5th spindle with electric height adjustment 6) Additional bottom horizontal spindle: 170 mm, 5.5 kW 7) Universal spindle: 170 mm, adjustable up to 180°, 7.5 kW - Spindle diameter: 35 mm (all spindles) - All spindles adjustable vertically and horizontally - Top: 6 powered feed rollers (toothed), including 2 double rollers - Top: 4 outfeed rubber rollers - Pneumatically pressed rollers - Side pressure roller included - 2 guide rails in the table - Electrically adjustable planing thickness: 0.37 kW - Infeed table length: 2,480 mm - Stepless feed speed adjustment - Feed motor: 2.2 kW - Extraction port diameters: 1 x 135 mm, 5 x 120 mm - Dimensions (LxWxH): 5,550 x 1,900 x 1,660 mm - Weight: approx. 3,500 kg FEATURES – Made in Germany – Equipped with 7 cutterheads – Universal spindle – Used planer, in very good condition Net price: 27,900 PLN Net price: 6,640 EUR Net price calculated at exchange rate 4.2 PLN/EUR (price may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7556 Technical specifications: - Min / max working width: 20 / 240 mm - Min / max working height: 8 / 160 mm - Number of spindles: 4 1) Bottom horizontal, 240 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 240 mm, 7.5 kW - All heads adjustable vertically and horizontally - Spindle diameter: 40 mm – Top: - 6 powered infeed rollers, toothed (including 2 double rollers) - 2 powered outfeed rollers, smooth rubber – Bottom: - Lateral pressure before and after the roller on the lower table - Powered infeed toothed roller, swiveling, on the lower table before the first spindle - 2 pneumatic lateral pressure units - Powered outfeed roller, smooth metal - All rollers pneumatically loaded - Infeed table length: 2180 mm - Table adjustable vertically - Centralized lubrication - Electric thickness adjustment - Lifting motor: 0.75 kW - Stepless feed speed adjustment via inverter: 6–30 m/min - Feed motor: 3 kW Dcjdpfsyy Ndlsx Aaaef - Feed through Cardan shafts - Enclosed in a cabin + - Extraction outlet diameter: 4 x 150 mm - Dimensions (L x W x H): 3750 x 1750 x 1800 mm - Weight: 3300 kg ADVANTAGES – Four-head configuration – Ideal for wet and dry wood – Used machine, excellent condition Net price: 75,900 PLN Net price: 18,070 EUR (based on 4.2 EUR exchange rate) (Prices may change with significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7221 TECHNICAL SPECIFICATIONS - min / max working width: 45 / 150 mm - min / max working height: 15 / 50 mm 3 spindles: 1) lower horizontal 11 kW 2) upper horizontal 22 kW (7000 rpm) 3) lower horizontal 5.5 kW spindle diameter: 40 mm - spindles 1 and 3 adjustable manually up/down, left/right - spindle 2 adjustable manually left/right - spindle 2 adjustable electrically up/down - spindles 2 and 3 equipped with brakes Top section: - 3 infeed, driven, metal toothed rollers - 1 outfeed, double, driven, rubber roller Bottom section: - infeed pressure device - grooved table - driven, smooth metal roller - electric thickness adjustment - variable feed speed: 6-24 m/min - feed motor: 3 kW - feed via Cardan shafts - infeed table length: 1970 mm - automatic table lubrication system - extraction port diameter: 1x150 mm, 2x140 mm - dimensions (LxWxH): 3070x2000x1800 mm Djdpeyy I Ayofx Aaaecf - weight: 2000 kg ADVANTAGES – Made in Germany – With 3 heads – For processing lamellas – Grooved table – Complete set of cutter heads included – Unpainted – Very good condition – Used planer Net price: 125,900 PLN Net price: 29,980 EUR Net price calculated at an exchange rate of 4.2 PLN/EUR (In the event of significant exchange rate fluctuations, the price may be subject to change)

Condition: excellent (used), Catalogue number: 7713 TECHNICAL DATA - Maximum workpiece width: 240 mm - Maximum workpiece height: 130 mm - 6 spindles: 1) Bottom horizontal: 240 mm, 7.5 kW 2) Right vertical: 130 mm, 5.5 kW Dsdpfsyy I Agsx Aaaocf 3) Left vertical: 130 mm, 5.5 kW 4) Top horizontal: 240 mm, 7.5 kW 5) Top horizontal: 240 mm, 5.5 kW (Spindles 4 and 5 adjustable electrically up/down) 6) Bottom horizontal: 240 mm, 5.5 kW - All spindles adjustable up/down, left/right - Spindle diameter: 40 mm *From above: - 8 infeed metal feed rollers, toothed, including 3 double rollers - 4 outfeed smooth rubber feed rollers, including 2 double rollers *From below: - 3 smooth feed rollers - 3 lateral pressure rollers - Infinitely variable feed speed adjustment via inverter - Pneumatically adjustable pressure rollers - Feed motor: 7.5 kW - Feed via cardan shaft rollers - Electric thickness adjustment - Lifting motor: 0.75 kW - Infeed table length: 2480 mm - Pneumatic cabin opening/closing - Pneumatic table blow-off - Central table lubrication - Extraction port diameters: 3x120 mm, 3x150 mm - Dimensions (L/W/H): 5300x1700x1800 mm - Weight: 5000 kg ADVANTAGES – Italian production – 6-head design – For wet and dry wood – Pneumatic cabin opening – Pneumatic table blow-off – Spindles 4 and 5 electrically adjustable – Used planer, in very good condition Net price: 126,900 PLN Net price: 30,200 EUR (depending on exchange rate 4.2 EUR) (Prices may vary in case of significant changes in exchange rate)

Condition: excellent (used), CATALOG NUMBER 6679 TECHNICAL DATA - Maximum workpiece width: 250 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Lower horizontal 250 mm 5.5 kW 2) Right vertical 170 mm 5.5 kW 3) Left vertical 170 mm 5.5 kW 4) Upper horizontal 250 mm 7.5 kW 5) Lower horizontal 250 mm 7.5 kW 6) Universal 250 mm, 360° adjustable, 5.5 kW - 6th spindle electrically adjustable up/down - All spindles adjustable up/down, right/left - Spindle diameter: 40 mm - Top: 6 powered, toothed, infeed rollers including 2 double rollers - Top: 6 powered, rubber, smooth, outfeed rollers including 2 double rollers - Top: 2 hold-downs - Bottom: 1 powered, toothed, swivelling infeed roller before the first spindle - Bottom: 2 powered, metal, smooth outfeed rollers - Bottom: 4 lateral pressure rollers - Feed drive using Cardan shafts - Pneumatic pressure rollers - Infinitely variable feed speed via inverter: 6–30 m/min - Feed motor: 4 kW - Working pressure: 8–10 bar - Electric thickness adjustment - Lifting motor: 1.1 kW - Central table lubrication - Infeed table length: 2180 mm - Extraction port diameter: 6 x 150 mm - Dimensions (L/W/H): 5000 x 1800 x 1900 mm - Weight: approx. 4600 kg ADVANTAGES – Italian manufacture – 6-head configuration – Full DTR technical documentation + CE certification – Ideal for both wet and dry wood Dsdeyy I Aaepfx Aaascf – Universal spindle – Excellent condition / as new Net price: 134,900 PLN Net price: 32,100 EUR Net price calculated at 4.2 PLN/EUR (price may vary in case of significant exchange rate fluctuations)

Condition: excellent (used), CATALOG NUMBER 7220 TECHNICAL DATA - Min – max working width: 20 – 230mm - Min – max working height: 8 – 160mm 7 spindles: 1) Lower horizontal 230mm 5.5kW 2) Right vertical 160mm 5.5kW 3) Left vertical 160mm 5.5kW 4) Right vertical 160mm 5.5kW 5) Left vertical 160mm 5.5kW 6) Upper horizontal 230mm 7.5kW 7) Lower horizontal 230mm 7.5kW - All spindles adjustable up/down, left/right - Spindle diameter: 40mm - Spindle speed: 6000rpm From above: - 10 toothed steel infeed rollers, including 2 double rollers - 3 lateral pressure units From below: - Lateral pressure unit at the infeed - Toothed steel twisting feed roller in lower table - 2 lateral pressure units - Ribbed worktable - Ribbed steel feed roller - Smooth steel feed roller Dcsdpfx Aeyy Iyloaaof - Pneumatically adjustable rollers - Infeed table length: 2410mm - Centralized table lubrication - Electric thickness adjustment - Body raising motor: 1.1kW - Stepless feed speed adjustment via inverter: 6–30m/min - Feed motor: 5.5kW - Feed via Cardan shafts - Enclosed in cabin - Extraction port diameter: 7x160mm - Dimensions (LxWxH): 5100x2190x1800mm - Weight: 5400kg ADVANTAGES – Equipped with 7 heads – Ideal for both wet and dry wood – DTR technical documentation included – Used planer, very good condition Net price: 138,900 PLN Net price: 33,070 EUR Net price calculated at the rate of 4.2 PLN/EUR (price may change significantly if the exchange rate fluctuates)

Condition: excellent (used), Catalogue number 6368 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 230 mm - Maximum workpiece height: 130 mm 7 spindles: 1) bottom horizontal, 230 mm, 5.5 kW 2) right vertical, 130 mm, 5.5 kW 3) left vertical, 130 mm, 5.5 kW 4) top horizontal, 230 mm, 7.5 kW 5) top horizontal, 230 mm, 11 kW 6) bottom horizontal, 230 mm, 18.5 kW 7) universal, 230 mm, adjustable 360°, 5.5 kW - all spindles adjustable up/down, right/left - all spindles equipped with electric brake - spindle diameter: 40 mm - spindles 4 and 5 adjustable electrically up/down - top: 8 metal feed rollers, twisted, including 2 double rollers - top: 4 rubber outfeed rollers - top: 2 hold-downs - bottom: pawls - bottom side: 3 hold-downs - bottom: 2 smooth metal feed rollers - bottom: 2 double rubber feed rollers - rollers pneumatically loaded - feed via Kardana shafts - stepless feed speed adjustment 5–36 m/min - feed motor 4 kW - electric thickness adjustment 0.75 kW - infeed table length: 1980 mm Dsdoyy Iyfopfx Aaaocf - fully enclosed in soundproof cabin - central lubrication for the table - extraction port diameters: 5x120 mm, 2x150 mm - dimensions (L/W/H): 5500 x 1840 x 1900 mm - weight approx. 5000 kg ADVANTAGES – Italian manufacture – 7-head configuration – suitable for wet and dry wood – universal final spindle – unpainted – used four-side planer, in very good condition Net price: 146,900 PLN Net price: 34,970 EUR, depending on exchange rate 4.2 EUR (Prices may vary in case of higher fluctuations)

Condition: excellent (used), Catalogue number 6338 TECHNICAL DATA - Maximum working width: 230 mm - Maximum working height: 160 mm 7 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 160 mm, 5.5 kW 3) Left vertical, 160 mm, 5.5 kW 4) Top horizontal, 230 mm, 7.5 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 7.5 kW 7) Universal 360°, 230 mm, 7.5 kW - All spindles adjustable up/down and right/left - Spindle diameter: 40 mm - All spindles equipped with brake - Spindle speed: 6,000 rpm From above: - 6 geared, steel infeed rollers including 2 double rollers - 4 rubber outfeed rollers including 1 double roller - 3 outfeed pressure rollers From below: - Side pressure roller at infeed - Geared, swiveling, steel infeed roller in lower table - 3 smooth steel feed rollers - Pneumatically adjustable rollers - Length of infeed table: 1,190 mm - Centralized table lubrication - Electric planer thickness adjustment - Lifting motor: 0.56 kW - Stepless feed rate adjustment via inverter: 6–24 m/min - Feed motor: 3.7 kW - Cardan shaft roller feed - Enclosed in cabin - Extraction port diameter: 7 x 125 mm - Dimensions (L x W x H): 5,100 x 2,070 x 1,900 mm - Approximate weight: 5,000 kg ADVANTAGES - 7 heads - Universal spindle - Ideal for both wet and dry wood - Spindles equipped with brakes - Full technical documentation (DTR) - Used planer, in very good condition Dcsdeyy Ixhspfx Aaajf Net price: 149,900 PLN Net price: 35,690 EUR at an exchange rate of 4.2 EUR (Prices may vary with larger fluctuations)

Condition: excellent (used), Catalogue number: 7715 TECHNICAL SPECIFICATIONS - Maximum workpiece width: 220 mm - Maximum workpiece height: 130 mm - 8 spindles: 1) Bottom horizontal 220 mm 5.5 kW 2) Right vertical 130 mm 7.5 kW 3) Left vertical 130 mm 7.5 kW 4) Right vertical 130 mm 5.5 kW 5) Top horizontal 220 mm 11 kW – 5th spindle electrically adjustable up/down 6) Bottom horizontal 220 mm 5.5 kW 7) Bottom horizontal 220 mm 5.5 kW – 7th spindle with support + Jointer system (cutterhead sharpening) 8) Universal 220 mm, 360° adjustable, 7.5 kW - All spindles adjustable vertically and laterally - Spindle diameter: 40 mm Feed system (top): - 6 double-toothed infeed rollers, driven, + 1 single roller - 3 double smooth rubber outfeed rollers, driven + 3 single rollers - Digital length counter Dcedpfxsyy Iv Te Aaaef Feed system (bottom): - Swivelling toothed steel infeed roller integrated into lower table - 3 smooth steel feed rollers - Feed drive via Cardan rollers - Pneumatic pressure rollers - Stepless feed speed adjustment + 2-speed gearbox: 10–60 m/min - Feed motor: 10 kW - Electric thickness adjustment - Body lifting motor: 0.75 kW - Centralised table lubrication - Extraction connection diameters: 5x140 mm, 3x120 mm - Machine dimensions (LxWxH): 4680x1780x1850 mm - Control cabinet dimensions (on pallet): 1020x1000x2230 mm - Weight: approx. 5000 kg ADVANTAGES - Equipped with 8 cutterheads - Universal spindle - Ideal for wet and dry timber - Made in Germany, WEINIG brand - Unpainted (original finish) - Very low operating hours - Used thickness planer, like new Net price: 165,900 PLN Net price: 39,500 EUR (based on exchange rate 4.2 EUR) (Prices may change with significant exchange rate fluctuations)

Condition: used, Year of construction: 2014, functionality: fully functional, input voltage: 400 V, type of input current: three-phase, planing width: 410 mm, rotational speed (max.): 6,000 rpm, total length of planing tables: 1,800 mm, overall weight: 355 kg, number of planer blades: 3, planer shaft diameter: 72 mm, - Year of manufacture: 2014 - Not repainted - After technical inspection - Operating manual, technical documentation (DTR) TECHNICAL SPECIFICATIONS: - Planing width: 410 mm - Number of knives: 3 - Rotational speed: 6000 rpm - Cutterblock diameter: 72 mm SURFACE PLANER: - Planing width: 410 mm - Max depth of cut: 4 mm - Jointer table length: 1800 mm - Fence length: 150 x 1100 mm THICKNESSER: - Planing width: 404 mm - Table length: 600 mm - Planing height min/max: 4/225 mm - Feed speed: 6 m/min - Motor power: 4 kW - Voltage: 3×400 V Dsdew H R I Sjpfx Aaaocf - Extraction port diameter: 100 mm Machine overall dimensions: - Length: 1950 mm - Width: 800 mm - Height: 1090 mm - Weight: 355 kg

Condition: used, Year of construction: 2001, functionality: fully functional, planing height: 170 mm, spindle diameter: 40 mm, planing width: 230 mm, – German-made – Year of manufacture: 2001 Dedpfxjw H Smhj Aaascf – Total power: 42 kW – Driven rollers in the table TECHNICAL SPECIFICATIONS: – Planing width: 230 mm – Planing height: 170 mm – Electric height adjustment – Spindle diameter: 40 mm – 1st (bottom) spindle: 7.5 kW – 2nd (left) spindle: 11 kW – 3rd (right) spindle – 4th (top) spindle: 11 kW – 5th (bottom) spindle: 5.5 kW – Continuously variable feed speed: 6–38 m/min – Feed motor power: 4 kW – Infeed table length: 1000 mm – Electric brakes – 5 driven top steel rollers – 1 driven top rubber roller – 2 driven table rollers: one is toothed – Air cushion in the table – Pneumatic pressure system – Feed via cardan shafts – Outlet diameter: 5 x 140 mm – Centralized table lubrication system – Machine dimensions (L/W/H): 390 / 210 / 230 cm – Weight approx. 4000 kg

Condition: good (used), Year of construction: 1999, Four side planer Leadermac Compact 423 S - machine in stock - after the technical review - year of production 1999 - chrome tops - electronic height adjustment TECHNICAL PARAMETERS: - planing width 230 mm - planing height 130 mm - electric adjustment of the left head - electric adjustment of the upper head - electronic height adjustment - five top steel rollers - one upper rubber roller - diameter of the spindles 40 mm 1 lower spindle 5.5 kW diameter 2 right spindle 3 left spindle 7.5 kW 4 upper spindle 7.5 kW - tool diameters 160 and 180 mm - pneumatic clamps - feed on cardan shafts - smoothly adjustable feed 6-20 m / min - 2.2 kW feed motor power - chrome tops - length of the preliminary table top 1980 mm - diameter of nozzles 4x 130 mm Dedpjgufi Sofx Aaascf Machine dimensions: - length 340 cm - width 190 cm - height 200 cm - weight 2200 kg

Condition: good (used), Year of construction: 2000, Leadermac LMC 523 Smartmac four side planer - year of production 2000 - DTR - electronic height and width adjustment - possibility to save permanent parameters TECHNICAL PARAMETERS: - planing width 230 mm - planing height 140 mm - diameter of the spindles 40 mm 1 lower spindle 7.5 kW 2 right spindle 5.5 kW 3 left spindle, 5.5 kW 4 upper spindle 7.5 kW 5 lower spindle 7.5 kW smoothly adjustable feed 3 kW feed motor power electronic height adjustment electronic adjustment of the left head feed on cardan shafts five top steel pull rollers two upper rubber pulling rollers one role in the table top pulling pneumatic material pressure minimum material length 400 mm length of the preliminary table 2000 mm chrome tables stub diameter 5 x 125 mm Machine dimensions 370 x 200 x 190 cm Dcjdpfx Aeifftxoaajf weight ~ 3000 kg

Condition: used, functionality: fully functional, type of input current: three-phase, planing width: 630 mm, working width: 630 mm, height adjustment type: electric, planer shaft diameter: 125 mm, planing height: 240 mm, – Manufactured in Poland by Jaroma – DTR technical documentation available TECHNICAL SPECIFICATIONS: – Shaft width: 630 mm – Knife shaft suitable for multiple resharpenings – Knife shaft diameter: 125 mm – Knife shaft rotation speed: 6000 rpm – Max. workpiece thickness: 240 mm – Adjustable rollers in the lower table – Motor: 5.5 kW – Electric height adjustment – Two feed speed options – Overall dimensions (L/W/H): 120 / 128 / 125 cm – Weight: 1060 kg Dodpfxow Ip Sqs Aaaocf

Condition: good (used), Year of construction: 1988, used thickness planer SCM S52 year of manufacture 1988 table size 520x850 mm working width 520 mm minimum working height 3 mm maximum working height 240 mm max. stock removal 8 mm Tersa cutterblock with 4 knives cutterblock diameter 120 mm cutterblock speed 4500 rpm Dcjdjyvz N Eopfx Aaaef feed speed 6.5-10-13-17 m/min motor power 7.5 kW required space 1000x900x1000 mm weight approx. 600 kg

Condition: good (used), Year of construction: 1990, Used Surface Planer SCM F 520 Year of manufacture: 1990 Manufacturer: SCM Model: F520 Dodpsyvz I Ijfx Aaajcf Working width: 520 mm Total table length: 3000 mm Infeed table length: 1780 mm Outfeed table length: 1180 mm Hydraulic table rise and fall Adjustable angular fence, dimensions 1500x175 mm Motor power: 5.5 kW Cutterblock speed: 5000 rpm Chip thickness indicator Max. cutting depth: 8 mm Noise reduction combs on shaft Tersa 4-knife cutterblock, diameter 120 mm Star-delta starter Extraction port: Ø 120 mm Table height: 860 mm Dimensions (LxWxH): 299 x 95 x 110 cm Weight: 950 kg

Condition: good (used), Year of construction: 2006, functionality: fully functional, machine/vehicle number: 106531, working width: 230 mm, power: 75 kW (101.97 HP), input current: 163 A, table width: 230 mm, Equipment: cabin, Rarity! Four-side planer Weinig Powermat 500 with splitting unit!! (the last two spindles fitted with saw blades, anti-kickback device, splitter wedge) for sale complete with all accessories. The machine has 7 spindles/shafts (bottom / right / left / top / bottom / right / left). Dedpfxeyyw Ufe Aaascf We used the line to produce middle layers for three-layer board manufacturing. The machine is in perfect working order. The machine is still in operation and can be demonstrated. Further technical details will follow in the next few days...

Condition: ready for operation (used), Year of construction: 1970, operating hours: 1,362 h, functionality: fully functional, machine/vehicle number: 9286, planing width: 600 mm, Planer machine Kupfermühle 5 spindles: bottom / top / right and left / bottom Dsdsyyvuwopfx Aaajcf We have produced castle floorboards with this machine, and it was operational until the end. The machine can be demonstrated. Due to its age, it is sold without warranty or guarantee.

Condition: new, Jointer and thickness planer HOLZKRAFT fs 30c TERSA - Exhibition machine - Table opening to the rear, TERSA planer shaft, helical toothed infeed roller ----- Technical data ----- Planing width: 300 mm, Thicknessing table dimensions: 565 x 300 mm, table length: 1,510 mm, Dcodpfx Aaju R Sz Toaof max. chip removal: 4 mm, planer shaft Ø: 72 mm, Number of knives: 3 pieces, clearance height: 230 mm, min. Workpiece thickness: 3 mm, feed speed: 7 m/min, Speed: 5,200 rpm, Extraction nozzle Ø: 2 x 120 mm, Motor power 400 V: 5.5 HP / 4 kW, weight: 270 kg - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 41es TERSA - Exhibition machine - ----- Technical data ----- Dcodju R S Awspfx Aaaof Planing width: 410 mm, Thicknessing table dimensions: 775 x 410 mm, table length: 2,200 mm, max. chip removal: 5 mm, planer shaft Ø: 95 mm, Number of knives: 4 pieces, Passage height: 240 mm, min. Workpiece thickness: 3 mm, feed speed: 6 / 12 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 6.6 HP / 5.0 kW kW, weight: 450 kg - Special offer price - - new exhibition machine -

Condition: new, Jointer and thickness planer HOLZKRAFT fs 52es digital TERSA - Exhibition machine - TERSA planer shaft, electric height adjustment, Digital display for planer thickness ----- Technical data ----- Planing width: 520 mm, Thicknessing table dimensions: 850 x 520 mm, table length: 2,250 mm, max. chip removal: 5 mm, planer shaft Ø: 120 mm, Number of knives: 4 pieces, Passage height: 240 mm, Dedpfx Aaeu R Sztjajcf min. Workpiece thickness: 3 mm, feed speed: 5 / 8 / 12 / 18 m/min, Speed: 5,000 rpm, Extraction nozzle Ø: 120 mm, Motor power 400 V: 9.5 HP / 7.0 kW, weight: 695 kg - new exhibition machine -

Year of construction: 2023, operating hours: 10 h, condition: new, functionality: fully functional, Here we offer a machine that was specially developed for fixing loose or cracked branches. The branches are automatically recognized as they pass through and fixed with hot melt adhesive. This significantly reduces waste due to branch branches. With opaque painted surfaces, the branch becomes almost invisible. Net Automation sets the standard with the AELA XKI new technological standards in the Diagnosis and correction of wood characteristics. • greatly reduced throughput times • immediate further processing possible • Visual enhancement • Easiest operation DIAGNOSIS AND CORRECTION • Rotten branches • torn branches • Resin galls Dodpfx Aaopiufwsaocf • Wing branches etc. ..... ..... ADVANTAGES • no tear-outs when planing • Detection of dirt and slatted marks • Diagnosis with artificial intelligence (AI) • automated vaccination process The system can be viewed and tested by arrangement in 77866 Rheinau.

Condition: ready for operation (used), Year of construction: 1990, machine/vehicle number: 8905829, power: 3 kW (4.08 HP), input voltage: 380 V, planing width: 430 mm, total width: 600 mm, total height: 1,200 mm, table length: 2,750 mm, Planing width: max. 430mm, table length 2750mm 4-blade shaft with reversible blade, toothed table lips Dedpfx Aouivw Tjaascf Chip thickness adjustment via handwheel with magnifying glass display Motor: 3kW, 380V Condition and details see pictures

Condition: excellent (used), Catalog number 7289 TECHNICAL DATA - Maximum workpiece width: 230 mm - Maximum workpiece height: 170 mm 6 spindles: 1) Bottom horizontal, 230 mm, 5.5 kW 2) Right vertical, 170 mm 3) Left vertical, 170 mm (spindles 2 and 3), 11 kW 4) Top horizontal, 230 mm, 11 kW 5) Top horizontal, 230 mm, 7.5 kW 6) Bottom horizontal, 230 mm, 11 kW - All spindles adjustable up/down, left/right - Spindles 4 and 5 electrically adjustable up/down - Spindle speed: 8,000 rpm - Spindle diameter: 40 mm - All spindles equipped with electric braking - 6 feed-in, driven, toothed upper rollers, including 1 double - Double exit, driven, rubber-coated upper roller - Double exit, driven, rubber-coated lower roller - Side pressure unit - Feed via Kardana shafts - Pneumatically tensioned rollers - Infinitely variable feed speed: 6–24 m/min - Feed motor: 4 kW - Electric planing thickness adjustment - Body lifting motor: 0.55 kW - Central table lubrication - Extraction nozzle diameter: 6 × 140 mm - Dimensions (L×W×H): 4,900 × 2,400 × 2,000 mm - Weight: approx. 4,000 kg FEATURES – German-made, WEINIG brand – With 6 heads – Not repainted – Used planer, very good condition Dcsdeyyzwqopfx Aaaof Original pictures Net price: PLN 142,900 Net price: EUR 34,000 (based on an exchange rate of 4.2 EUR) (Prices may vary with significant exchange rate fluctuations)