Used press brakes with 200-299t bending force for sale (184)

Condition: excellent (used), Year of construction: 2008, pressing force: 100 t, Press force: 1000 kN (100 tons) Bending length: 2050 mm Stroke: 215 mm Opening height: 500 mm Overhang: 400 mm Column spacing: 1700 mm Back gauge: X, R, and Z axes Accuracy of Y-axis: ±0.004 mm Motor power: 7.5 kW Weight: 7400 kg Nedjzclc Ispfx Am Tjld Year of manufacture: 2008

Condition: ready for operation (used), Year of construction: 2021, pressing force: 275 t, total width: 2,000 mm, total height: 3,000 mm, overall weight: 13,000 kg, product length (max.): 4,000 mm, Press brake manufactured in 2021. This KNUTH AHK H 30270 features a pressing force of 270 t and a bending length of 3,100 mm. It includes a Cyberlec Touch 8 Controller and a motorized CNC anti-winding system for enhanced precision. The machine is equipped with front support arms sliding on linear guides and a pedal drive for ease of operation. If you are looking to get high-quality bending capabilities, consider the KNUTH AHK H 30270 press brake we have for sale. Contact us for further details. • Loading assistance: Yes • Running hours: 372,4 hours / 36.888 bends • 3 controlled axes: Y1, Y2, X • Controller: Cyberlec Touch 8 • Motorized CNC anti-winding (crowning) system • European clamping tool system • Front support arms sliding on linear guides along the entire length; equipped with T-channels and tilt stops Nodpfx Aszfphfjm Tjld • Rear pusher (backgauge) actuated by servomotor with movement via ball screws and linear guides (X) • Protective guards with electrical contactors • Pedal drive • Workspace lighting lamp • CE certification with Akas Laser Manual safety LC II M FMSC • Technical and operating manual • Distance between columns: 2.600 mm • Knife range: 265 mm • Distance between table and upper support: 485 mm • Depth in the console (C): 410 mm • Table height: 950 mm • Y-axis speeds: fast 110 mm/s; bending 9 mm/s; return 100 mm/s • X-axis fast speed: 250 mm/s; X-axis range: 750 mm/s • R-axis fast speed: 100 mm/s; R-axis range: 200 mm/s • Engine power: 22 kW • Oil tank: 350 L Additional equipment • Tooling: Punch height 67 mm; 4V prism 6 x 60 mm Technical Specification Bending Length 3100 mm

Condition: new, Year of construction: 2026, pressing force: 200 t, Sheet metal bending press – 200 T – Open width 1,600 mm Nlodpfxezg Nu Ue Am Ted For sale is a hydraulic sheet metal bending press from the manufacturer DURENDUS with a maximum pressing force of 200 T. The machine has an open width of 1,600 mm, a maximum installation height of 1,200 mm, and a stroke of 1,000 mm, making it suitable for bending, forming, and straightening operations in industrial applications. ##### Technical data + information: Sheet metal bending press – 200 T – Open width 1,600 mm ==== General information - Reference ID: ME-2026-A-180_DE-2026-ME-215-01 - Design: 2-column frame press - Manufacturer: DURENDUS - Pressing force: 200 T (adjustable) - Open width: 1,600 mm - Open height: 1,200 mm - Ram surface area: 1,500 mm - Table height from the floor: 850 mm - Overall dimensions (W × D × H): approx. 1,300 × 2,700 × 3,900 mm - Total weight: approx. 5,300 kg ==== Hydraulic cylinder - Stroke: 0–1,000 mm - Working pressure: 270 bar - Cylinder diameter: Ø 220 mm - Piston rod diameter: Ø 130 mm - Column guides: Ø 160 mm - Working speed: 3 mm/s - Approach speed: 9 mm/s - Retract speed: 20 mm/s ==== Hydraulics & Drive - Hydraulic pump: ASC - Flow rate: 40 l/min - Motor power: 7.5 kW - Pressure accuracy: ±5 bar - Tank volume: 160 l - Hydraulic oil: HLP46 (not included in the scope of delivery) ==== Control system - Operation: Foot pedal - Pressure adjustment: manually via rotary control - Stroke limitation: manually via sensors - Safety PLC - Control panel with warning and status indicators ==== Safety - Safety PLC - CE-compliant design - Safety monitoring of all processes ==== Electrical connection - Main supply: 400 V AC - Control voltage: 24 V DC - Frequency: 50 Hz - Main motor connection power: 7.5 kW - Total connection power: approx. 11 kW - Protection class of the switch cabinet: IP54 ##### Application areas: Bending, forming, sheet metal processing, metalworking, steel construction, container construction, mechanical engineering, contract manufacturing, small series production (Sheet metal bending press, hydraulic sheet metal bending press, hydraulic press, 200 T press, 200-ton press, bending press, sheet metal bending machine, forming press, industrial press, coil bending press, battery coil press) Are you looking for a hydraulic press tailored to your specific application? Contact us for an individual offer. Our hydraulic presses are manufactured according to German and European Machinery Directives (Directive 2006/42/EC), EC standards, and EU safety regulations. Furthermore, our presses exceed Canadian and European safety requirements, as they meet all aspects of the national Brazilian safety standard NR 12, which is based on these. Our strength lies in the design and construction of special machines and press automation. We distribute customized hydraulic presses at surprisingly favorable prices. The hydraulic systems of the presses primarily use components from leading European manufacturers.

Condition: used, Year of construction: 2002, Hydraulic Guillotine Shear HACO TS 3006 Capacity: 3100 x 6,5 mm Back gear gauge travel: 1000 mm Year of construction: 2002 Motor power: 7,5 kW Nlsdpfx Amozku Dio Tod SP8 Command Blades with 4 cutting edges Voltage: 380 V Photocells at the back Length: 4000 mm Depth with photocells : 2800 mm Depth without photocells: 2200 mm Height: 1900 mm Weight: approx 5 T

Condition: used, Hydraulic Press Brake SAGITA BEYELER 200/4000 Slide travel: 150 mm Throat depth: 300 mm Distance between uprights: 3100 mm Motor power: 15 kW Manual Back gear gauge Nedpfx Aozku Axem Tsld The machine was only used for pre-bending of Hardox sheet Voltage: 380 V Dimensions (L x W x H): 4100 x 1800 x 2700 mm Weight: approx 15 T

Condition: used, Year of construction: 1980, pressure 200 t chamfer lenght 3000 mm distance between columns 2560 mm dayligth 450 mm throat 450 mm adjustment of stroke 240 mm horn length over column outer edge each 175 mm table length 3050 mm table width 280 mm table height over floor 820 mm Nlodpot Hllpofx Am Tjd electrics - voltage/frequency 220/50 V/Hz control CYBELEC, DNC60 stroke 250 mm operating pressure 150 bar weight of the machine ca. 15 t dimensions of the machine ca. L:4,0 x B:3,2 x H:3,44 m • hydraulical press brake, • new control CYBELEC DNC 60 • lower part of the machine moves down 500 mm to the floor, • at the moment the machine is mounted on a double-T-support; • prism and upper part of the machine in 3000 mm length

Condition: ready for operation (used), Year of construction: 1995, pressing force: 204 t, stroke length: 330 mm, total width: 2,000 mm, total height: 3,200 mm, overall weight: 17,700 kg, travel distance Y-axis: 330 mm, product length (max.): 4,000 mm, number of axes: 4, This 4-axis EHT EHPS 20-35 press brake was manufactured in 1995. It features a pressing force of 2,000 kN and a bending length of 3,550 mm, providing robust capabilities for metal forming. The machine includes a distance between columns of 3,050 mm and a throat depth of 350 mm. If you are looking to get high-quality bending capabilities, consider the EHT EHPS 20-35 press brake we have for sale. Contact us for further details. • Control Unit: DNC 806 PS • Distance Between Columns: 3,050 mm • Throat Depth: 350 mm • Backgauge Range (X-Axis): 5 – 1,000 mm • R-Axis Adjustment Range: 115 – 265 mm • Main Motor Power: 18.5 kW • Total Connected Load: 25 kW • Hydraulic Oil Capacity: 400 l • Lower Tool: Multi-V Die (Installed) • Condition: Good • Power Supply: 3 Phase • Frequency: 50 Hz Technical Specification Nodpezc Igisfx Am Tjld Bending Length 3550 mm

Condition: used, Bystronic Xpert 250x4100 - CNC Press Brake Bending length: 4100 mm Capacity: 250 t Nljdpfx Amszizybo Tod - Bystronic 2D and 3D graphics control, ergonomic operating terminal with 15-inch color monitor - 8 axes (Y1, Y2, X, R, Z1, Z2, A1, A2) - AKAS laser safety device, manually adjustable in height - Hydraulic crowning - Air bending - Radius bending - Without tooling - Includes operating manual - Year of manufacture: 2007 Technical data - Press force: 2500 kN - Bending length: 4100 mm - Standard stroke: 265 mm - Installed height (clearance between lower and upper beam): 550 mm - Distance between side supports: 3750 mm - Overhang: 400 mm - Back gauge area: 1050 mm - X-axis travel: 590 mm - X-axis speed: 500 mm/s - R-axis travel: 250 mm - R-axis speed: 150 mm/s - Z-axis speed: 1000 mm/s - Z-axis speed (6 axes): 500 mm/s - Y-rapid traverse: 190 mm/s - Y-working speed: 1 - 10 mm/s - Y-working speed for robot operation: 1 - 12 mm/s - Y-return speed: 150 mm/s - Crowning: hydraulic - Adjustable support arms: 750 mm - Maximum surface pressure without wear strip: 100 N/mm2 - Maximum surface pressure with wear strip: 120 N/mm2 - Oil capacity (tank volume): 610 l - Noise emissions: 74 dB(A) - Main motor power: 22 kW - Voltage: 3x 400 V / 50/60 Hz - Transport dimensions WxHxD: 5200 x 3200 x 2100 mm - Weight: 19200 kg

Condition: ready for operation (used), Year of construction: 1999, pressing force: 235 t, controller manufacturer: DELEM, number of axes: 4, This 6s TRUMPF TrumaBend V230 was manufactured in 1999. It features a press force of 230 tons and a work length of 3000 mm. The machine includes a back gauge with 4 axes for enhanced precision. If you are looking to get high-quality bending capabilities, consider the TRUMPF TrumaBend V230 press brake we have for sale. Contact us for further details. Nlodpfx Ajzcm I Ejm Ted Technical Specification Bending Length 3000 mm

Condition: used, Press Brake Brand: LVD Capacity: 3000 x 135T Model: PPBL 135/30 Distance between uprights: 2550 mm Throat depth: 200 mm Nlodpfex Tqt Uex Am Ted Stroke: 130 mm Working speed: 8 mm/s Number of backgauge axes: 2 Motor power: 8.5 kW

Condition: good (used), Year of construction: 2001, functionality: fully functional, Press force: 230 t Bending length: 3060 mm Frame width: 2690 mm Stroke: 365 mm Control system: DELEM DA 65 Overhang: 410 mm Installation height: 535 mm Dimensions: 3660 x 2310 x 3100 mm Machine weight (approx.): 17,700 kg Equipment: - CNC control system Delem - Crowning - Wila tool holder - 1 bending aid - 2 support arms - Side protection doors - 2-hand foot control - Die shifting Nedpfxozd Tkbo Am Tsld - 2 manually adjustable stop fingers - Controlled axes: y1, y2, x, r - Operating hours: 13,993 h

Condition: good (used), Year of construction: 1999, functionality: fully functional, Press force: 225 t Bending length: 4050 mm Frame width: 3550 mm Control system: CYBELEC DNC 86 PS Total power consumption: 18.5 kW Machine weight (approx.): 18,000 kg Space requirement (approx.): 5180x2400x3200 mm Equipment: - CNC control system Cybelec Nljdpfx Aszd Sqyjm Tod - Pneumatic upper and lower tool clamping - Die shifting - Light curtain on the machine - 2 support arms in front of the machine - Controlled axes y1, y2, x, r, z1, z2 - Compensation - 2-hand foot control - Side protective doors

Condition: excellent (used), Year of construction: 2004, power: 25 kW (33.99 HP), stroke length: 350 mm, operating speed: 10 mm/s, total length: 6,000 mm, total width: 2,000 mm, total height: 3,400 mm, overall weight: 22,500 kg, travel distance X-axis: 1,000 mm, controller manufacturer: Delem DA 65W, working width: 4,300 mm, bending force (max.): 230 t, distance between stands: 3,700 mm, control type: CNC control, number of axes: 5, actuation type: hydraulic, Press brake DARLEY - EHP-LS 230 43/37 MACH-ID 9469 Make: DARLEY Nsdpfx Amoyvh S Tj Tjld Type: EHP-LS 230 43/37 Control: Delem DA 65W Year: 2004 Max. bending length: 4300mm Distance between column: 3700mm Max. pressing force: 230T Beam stroke: 350mm Table Width: 250mm Troth beam: 400mm Approch speed: 100mm/min. Working speed: 10mm/min. Return speed: 100mm/min. Adjustment X-Axis back gauge:1000mm Number of controlled axis: 5 Crowning: yes Hydraulic toolclamping: yes Power: 25kW Length: 6000mm Width: 2000mm Height: 3400mm Weight: 22500kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details!

Condition: refurbished (used), Year of construction: 2002, machine/vehicle number: 28668, functionality: fully functional, power: 27 kW (36.71 HP), input voltage: 400 V, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, operating speed: 12 mm/s, table length: 4,000 mm, year of last overhaul: 2025, Equipment: CE marking, safety light barrier, Control:Touch-B Axes:Y,X,R,Z1,Z2,XZ,W and EFL Clamping:wila hydraulic clamping Machine weight: approx. 21000 kg Type: PPEB 220/40 EFL Serial number: 28668 Without tools New R axe spindles New belts : Z axes and tilting Machine front side repainted. Nljdpezn Arpsfx Am Ted New venillators inside the heat exchanger. Wila clamping system checked and realigned,two middle segment changed to new ones.

Condition: new, Year of construction: 2024, Folding press AD-S 40220 | 4 meters, 220 tons Everything can be configured according to your wishes, with very short production and delivery times. Upon request, we will gladly provide you with further information. Technical data: Bending force: 220 tons Bending length (mm): 4050 Distance between stands (mm): 3600 Stroke (mm): 265 Installation height (mm): 530 Overhang (mm): 410 Table height (mm): 900 Table width (mm): 104 Y rapid traverse (mm/sec.): 160 Y working speed (mm/sec.): 10 Y return speed (mm/sec.): 140 X-axis working speed (mm/sec.): 250 R-axis working speed (m): 140 R-axis travel: 250 Nedpfjfirx Dox Am Tsld X-axis distance (mm): 650 Motor power: 22 kW Length: 5250 mm Width: 1770 mm Height: 2900 mm Weight: 14750 kg Standard equipment: Control: CNC Cybelec ModEva 19T CNC-controlled motorized crowning European tool clamping system / or Durma clamping system according to customer requirements Extended equipment: Safety system CE standard for EU: FIESSLER AKAS II M-FPSC-B-C (SAFETY PLC) Controlled axes for back gauge: X1, X2, R1, R2, Z1, Z2 Control: DELEM DA-66T Delem 66T – 69T or Durma control can be selected DAM – Durma angle measuring system Hydraulic upper tool clamping: Wila NSCL-I-HC/UPB – PRO – 180 t/m Hydraulic lower tool clamping: Wila NSCR-I-HC-CNC/UPB – PRO Power pack for hydraulic clamping D-BEND 3D CAD/CAM import and simulation program AP3 & AP4 bending aid 750mm to 1500 mm selectable Parking area for support arms (1000mm) TANDEM preparation Laser bending line Oil heating Central lubrication, manual or motorized Air conditioning for control cabinet

Condition: new, Year of construction: 2024, operating hours: 32 h, Manufacturer: DURMA Model: AD-S 30135 Year of manufacture: 2018 Bending length: 3050 mm Press force: 1350 kN Control system: CNC DT-15 Operating hours: 0 h Controlled 3 axes: Y1, Y2, X Nlsdsdx Rd Nepfx Am Tjd Distance between uprights: 2600 mm Stroke length: 265 mm Installed height: 530 mm Table width: 104 mm Table height: 900 mm Upright overhang: 410 mm Travel range of the X-axis: 650 mm (double guide, aluminum) Travel speed of the X-axis: 250 mm/s Approach speed: 160 mm/s Bending speed: 10 mm/s Retraction speed: 120 mm/s Dimensions L/W/H: approx. 4200x1680x2750 mm Weight: approx. 10250 kg Standard equipment Y1, Y2, X = 650 mm Control system: CNC DT-15 Manual crowning European tool clamping system 60 mm die holders (only for European die system) 2 front-movable support arms with linear guide over the entire length Back gauge: motorized with linear guide & ball screw Back gauge finger height-adjustable, R-axis manual Back gauge motor: servo Safety guards on the sides CE marking Extended equipment CE safety system with manual FIESSLER AKAS II M-FPSC-B-C + safety guard & switch The machine can be inspected and demonstrated at any time in our showroom in Staufenberg by prior appointment. Other machines are available for demonstration in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: used, Year of construction: 2005, machine/vehicle number: 05/460/013, functionality: fully functional, input voltage: 400 V, input current: 80 A, input frequency: 50 Hz, stroke length: 265 mm, operating speed: 200 mm/s, overall weight: 18,000 kg, Equipment: CE marking, For sale: Betzeler 3200 KN x 3100 MM machine – Hydraulic bending press Manufacturer: Beyeler GmbH, Mühlhäuser Strasse 3, D-99867 Gotha Machine type: PR 3200 kN x 3100 mm Serial number: 05/460/013 Year of manufacture: 2005 Machine weight: 18,000 kg Electrical data Voltage: 400 V Power: 30 kW Frequency: 50 Hz Phases: 3∼ Nedpfxszm S Tts Am Tsld Max. fuse rating: 80 AT Hydraulic/pneumatic data Max. air pressure: 8 bar Technical data (press brake) Force: 3200 kN Max. stroke: 265 mm Max. closing speed: 200 mm/s Pressing speed: 1–10 mm/s Max. O.A. response time: 90 ms Min. ESPE safety distance: 290 mm

Condition: like new (used), Year of construction: 2022, Bystronic ByBend Smart Nlodsy U I Ryspfx Am Tjd Hydraulic press brake Serial number: BYBEND22335SE Year of manufacture: 10/2022 Maximum pressing force: 2250 kN Working length: 4100 mm Maximum stroke: 300 mm Machine weight: 16,500 kg Equipment: Tools

Condition: like new (used), Year of construction: 2021, pressing force: 225 t, Bystronic Xact Smart 225/4100 – Hydraulic press brake Manufacturer: Bystronic Model: Xact Smart 225/4100 Serial number: XACT21278SE Year of manufacture: 08/2021 Njdey U I R Tjpfx Am Tjld Technical data: Maximum pressing force: 2250 kN Maximum working length: 4100 mm Maximum stroke: 200 mm Rapid traverse speed: 140 mm/s Working speed: 1–10 mm/s Return speed: 115 mm/s Machine weight: 15,000 kg Equipment: Tools

Condition: like new (used), Year of construction: 2022, pressing force: 80 t, Bystronic Xpress 80/2100 Hydraulic Press Brake Manufacturer: Bystronic Model: Xpress 80/2100 Serial Number: Xpress 22334EU Nlodpfx Amjy U I Tuj Tod Year of Manufacture: 10/2022 Technical Data: Maximum Press Force: 800 kN Maximum Working Length: 2100 mm Maximum Stroke: 200 mm Machine Weight: 6000 kg

Condition: excellent (used), Year of construction: 2000, machine/vehicle number: N000615, functionality: fully functional, operating hours: 4,626 h, power: 14.8 kW (20.12 HP), input voltage: 400 V, input current: 63 A, input frequency: 50 Hz, type of input current: three-phase, pressing force: 220 t, stroke length: 200 mm, operating speed: 10 mm/s, reverse speed: 100 mm/s, table width: 180 mm, table length: 3,220 mm, table height: 960 mm, throat depth: 420 mm, oil tank capacity: 295 l, total length: 4,360 mm, total width: 2,660 mm, total height: 3,050 mm, overall weight: 15,000 kg, year of last overhaul: 2025, Equipment: CE marking, documentation/manual, safety light barrier, See above. Nlodpfszkhvlex Am Tsd If you have any further questions or require additional details, please contact us directly.

Condition: used, functionality: fully functional, COLMAL hydraulic press brake 3000x250 ton, 4 axes, throat 300 mm. Dimensions: 380x350x180 (H) cm, weight 14,100 kg. Nlsdpfxowyng So Am Tsd

Condition: good (used), Year of construction: 2010, functionality: fully functional, operating hours: 35,295 h, bending force (max.): 230 t, number of axes: 5, Equipment: CE marking, documentation/manual, safety light barrier, Bending length [mm] 3230 Press force [tons] 230 Nlsdjza Eiispfx Am Tsd Control system TRUMPF TASC 6000 Operating hours [h] 35295 Hydraulic operation [h] 24098 Standard equipment: Machine - Robust machine frame as a welded construction in all-steel design - Press beam with high bending strength - Spherical bearing of the press beam with press beam inclination - Proportional valve technology and switchable double pump - Modern block hydraulics with control valves mounted on the cylinder - Electronic pressure gauge - Measuring system with centrally mounted glass scales and temperature compensation - Oil cooler - Control cabinet cooling - Modern machine design Back gauge system - Rear back gauge system with 2 axes and rack and pinion drive for the X and R axes - 2 back gauge fingers with secure adjustment from the front Tool clamping - Upper tool clamping system "New Standard Clamping" manual, hardened, self-centering; for vertical tool change - Lower tool clamping with hydraulic clamping, hardened Lower tool displacement - Lower tool displacement programmable (pneumatic, 2 positions) Control - Machine control: TRUMPF TASC 6000 graphical workshop programming - Windows XPe, Pentium 4 with 2.8 GHz clock speed - 2 GB RAM - 15" touch screen - Network enabled - Teleservice via analog telephone connection Operation - Control panel with LCD keypad, foot switch for up, down and emergency stop - Communication bus for the use of ACB angle sensor tools Safety - Safety device: integrated side doors + Rear back gauge system 5 axes (X, X1, R, Z1, Z2) + Upper tool clamping hydraulic + Crown control CNC + BendGuard + Additional foot switch + 2 pcs. support console + 1 pcs. MobileControl + ACB prepared

Year of construction: 2024, condition: as good as new (ex-display), Bending force: 2200 KN Bending length: 3050 mm Distance between columns (mm): 2600 mm Nljdped R Elcjfx Am Ted Stroke length (mm): 265 mm Overhang: 410 mm Installation height: 530 mm Operating speed Y (mm/sec): 10 mm/sec Motor power: 18.5 KW Operating speed X (mm/sec): 500 mm/sec Operating distance R (motorized): 350 mm Length: 4250 mm Width: 1700 mm Height: 2750 mm H7s8pkvti Weight: 11500 kg Standard equipment: Y1, Y2, pressure beam – axes (individually controllable) X and R axes CNC controlled. Control unit – ModEva 19T Servo motor for back gauge & linear ball screw system (X-R) (AL) CNC controlled crowning European tool clamping system Adjustable support arms (with T-slot and stopper) Specially designed hydraulic block and valves according to worldwide standards Electrical equipment according to worldwide standards Optional accessories: Bending upper tool H=66.5 (one of them split) Bending lower tool 4V die (one of them split) D-Bend 3D CAD/CAM import & simulation program The machine can be inspected and demonstrated at any time by appointment at our demonstration center in Staufenberg. Vsiqjq Further machines are available for demonstration at our location in Staufenberg. Upon request, we will be happy to provide you with further information.

Condition: new, Year of construction: 2024, functionality: fully functional, Discover the powerful Durma press brake at our demonstration center in Saerbeck. Nledpfxetr Dk Ej Am Tjd As a manufacturer, we offer you maximum precision and efficiency with a capacity of 3050 mm in length and 175 tons. Benefit from our comprehensive all-in-one service: We take care of transportation, installation, commissioning and offer you a one-year warranty as well as fast and reliable service. Visit us and see the quality and versatility of this first-class machine for yourself. Standard equipment Capacity (length - ton) 3050mm - 175t Installation height 530mm Outreach 450mm Stroke 265mm Servo drive Y1, Y2, X - 3 axles Control unit - DT 15 Manuel F. AKAS FPSC safety system CE-Fiessler Akas Servo motor backgauge & linear guide & Ball screw system Manual crowning European tool holder Sliding front arms Options - DELEM 69S control unit (3D control) -Motorized crowning - 6 axes X=650mm Y1, Y2, X ,R , Z1, Z2 (6 axes controlled press brake) press brake) -Lower tool European M.460R.85 -European upper tool P135.75.R08