Condition: used, functionality: fully functional, For gluing stair treads - Hydraulic adjustment of the angled beam Csdpfjygwp Usx Abrohd - Hydraulic cylinder with lateral ball bearing, adjustable, stroke 120 mm - Total and individual cylinder control Included in delivery: Press complete with all accessories: 4 hydraulic cylinders with 120 mm stroke, 1.8 t per cylinder, 3 cylinders can be switched off individually, 1 cylinder for adjusting the pressure beam, control panel for two operations, pressure gauge and pressure regulator, hydraulic unit, oil tank and hoses, - 220/380 Volt, - Pressing width 1800 mm - Pressing height 750 mm - Pressure beam support 80 mm - Weight approx. 500 kg Transport available at extra cost!

Condition: new, Year of construction: 2026, Availability upon request. Very robust machine with high pressing force. - Also suitable for producing marketable briquette quality, depending on the material. The large-sized press cylinder and the 70 mm briquette size make this possible. Our best-selling briquetting press series: + Proven, simple technology for extremely low failure rates. + 25 years of experience, continuous development, and know-how. + Several thousand machines in operation with satisfied customers. + Excellent price-performance ratio. Additional cost for demonstration cooling unit: €4,980 net. (can also be retrofitted later) * cools the press tongs (important after 4 hours) and the hydraulic oil. * Cooling unit recommended for regular operation of more than 4 hours at a time. Commodity code: 84793010, Briquette diameter: 70 mm, Front bushing: 125 mm, Briquette stroke max.: 100 mm, Briquette stroke opt.: 80 mm, Capacity (material-dependent): up to 150 kg/h* * depending on the bulk density, * based on a bulk density of 200 kg per cubic meter. Motor power: 9.2 kW, 400 Volts / 50 Hz / 3-phase, Length: 2095 mm, Width: 1300 mm, * with large chamber 1600 mm Height: 1700 mm, Weight: 1250 kg, Oil volume: 220 liters, Silo diameter: 1200 mm Silo capacity: approx. 1 cubic meter Pump: 75 liters Hydraulic pre-compressor Optional cooling for press tongs: yes, with special accessory - coolable press tongs Optional cooling for hydraulic oil: yes Cooling of the press tongs and hydraulic oil with a cooling unit (special accessory) Codpfjd Nm Siox Abrohd Optional level monitoring: yes Optional strand briquette: yes (material-dependent) Optional enlarged feed slide: yes, with special accessory - enlarged feed slide CE compliant Requirements for the raw material: - The moisture content (oven-dry basis) must be between a minimum of 6% and a maximum of 18%. - Chip length max. 20 mm - Installation temperature: temperature-controlled room with a minimum of +5°C - The feed material must be free of metals and mineral contaminants such as sand, stones, etc. Damage to the press tools and/or increased wear may result.

Condition: as good as new (ex-display), Year of construction: 2025, Machine for sale at a special price Another machine, available immediately (ex works Neckartailfingen) * Includes a 1-year warranty. Your advantages: Chedpfx Abed Nnwlsrsd + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g., 4 hours). Then, the press switches off. Technical data: Briquet dimensions: approx. 30 x 30 mm (square), Briquet length: 5-40 mm *material-dependent Throughput: up to a maximum of 20 kg/h *material-dependent Machine dimensions: approx. 137 x 75 x 148 cm (length x width x height), Machine weight: approx. 250 kg, Silo capacity: approx. 250 liters, Motor: 2.2 kW, 400 V - 50 Hz, Noise emission: 62 dB, Raw material requirements: - Wood chips and dust smaller than 15 mm in length - Moisture content less than 18% ATRO - Sand, stones, metals and minerals increase wear --- Options available at an additional cost: - Timer function + €490 net Machine is started manually and switches off automatically after the set time X. - Level sensor for automatic operation + €1450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €890 net (delivery time then approx. 8 weeks) - Special dies + €2,950 net ---

Condition: new, Year of construction: 2024, - Frame and edge press, single-sided/stationary - Usable dimensions in mm as a frame press: 2630 x 1610 - Usable dimensions in mm as an edge press: 3000 x 1610 - External dimensions in mm: 3200 x 2090 x 730 - Sturdy frame welded construction made of thick-walled profile tubes and laser-cut steel sheet parts ensures a torsion-resistant and dimensionally accurate press frame (no screwed frame parts!) Chjdehd Nywspfx Abrsd - With left-hand counter bearing, sliding carriage for width adjustment, central locking system, and 2 manual hydraulic press units with ergonomic handles. - 3 roller-bearing, vertical pressure beams, type SK, made of thick-walled profile tube, galvanized, with manual hydraulic press units incl. ergonomic handle. 20,000 N pressing force, 60 mm stroke. Press units adjustable in a 50 mm hole grid. - Counter bearing at the bottom with safety lock, adjustable in 5 steps in the hole grid - Lower clamp with spindle pressure - Chassis with 4 swivel casters (2 with brakes) - Powder-coated (glue-resistant) gray-white RAL 9002, pressure plate and counter bearing cornflower blue RAL 5010 - The Quattra 1-SK version is equipped with a comfortable adjustment system for the manual hydraulic press units, providing additional safety for the operator.

Year of construction: 1985, condition: used, closing pressure 4360 kN table-size 730 x 730 mm control B+R Industrieelektronik draw back pressure 190 kN ajustment speed max. 60 mm/sec return speed max. 90 mm/sec Cedpotqqr Esfx Abrohd daylight between the columns 900 mm total power requirement 30 kW dimensions of machine L x W x H 3,61 x 2,1 x 3,1 m dimensions of switch cabinet 0,85 x 0,44 x 2,0 m dimensions of hydaulic 1,0 x 0,85 x 2,36 m weight ca. 15 t = vulcanizing press with vertical closing unit, with form removal and form separation device

Condition: excellent (used), Through-feed System (of the furniture cabinets) Electro-mechanical pressing system Self-centering system Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) mm 4500 Adjustable feeding speed (m/min ) 10-40 Total lenght of the Press Clamp (mm) 4400 approx Electronic programmer PLC «OMRON» Total installed power (Kw) 8,8 approx With in-feed conveyor (motorized belt) With out-feed conveyor (motorized belt) Chsdpfxoyzh I Ss Abred SIZE of FURNITURE CABINETS: Minimum lenght of the furniture cabinet (mm) 250 Maximum lenght of the furniture cabinet (mm) 2500 Minimum depth (Width) of the furniture cabinet (mm) 250 Maximum depth (Width) of the furniture cabinet (mm) 700 Minimun height of the furniture cabinet (mm) 250 Maximum height of the furniture cabinet (mm) 1200

Condition: used, Plate dimensions 2.500 x 1.1250 mm Daylight opening 300 mm Number of daylights 1 St. Cjdpfx Aboy Ty E Terjhd weight of the machine ca. ca. 3 t kg Year unbekannt

Condition: good (used), Year of construction: 1994, Max pressure space : L 1900 x H 1800 mm Incl. OBEL-P High Frequenz unit. Chair seat bending : 3-4 min. pr cycle. Still connected to power. Can be examined in working condition. 1). 3D pressure can meet different shapes of plywood bending requirement and help customer develop more designs. 2). HF heating is dielectric heating. It heats products by friction of water melocules, fast, uniformly and effective 3). HF power is selective heating. It focus on glue heating but not heat the wood material, saving energy. 4). High quality. After pressing, plywood shape is steady and hard to change. Codpfozi Hpuox Abrjhd 5). HF bending press can work with metal mold, plywood mold as well as MDF mold. There are more choice for end user. Customer can make mold themselves easily. 6). HF power needs only electricity, clean and dust free.

Condition: new, Year of construction: 2023, We offer this new pellet press, manufactured in 2023. Manufacturer: Artmash (Ukraine) Year of manufacture: 2023 Production capacity: 700-900 kg/hour Die: 6mm Condition: new (10 tons produced for testing) Spare parts included: 2 dies and rollers Category ID: 917 Type ID: 2701 Type: pellet press Chjdpezh Hd Nefx Abrod If you have any questions or require further information, please send us a message or call us.

Condition: used, We are offering for sale a floor-type press made by the Italian manufacturer Colombo R. Available for immediate delivery. Chedpfx Aozry Rwebred

Condition: like new (used), functionality: fully functional, HOT PRESS with electric heating of plates , model ORMAMACCHINE NPC/E/DIGIT6/90 second hand machine working condition: excellent for wood, corian, joinery, furniture, custom furnishings, panels, doors, composite materials, and more maximum temperature: 140°C CE-certified machine plate dimensions: mm. 2500 x 1300 electric plate heating n.6 pistons, diameter: mm.70 opening: mm.400 total thrust: 90 tons automatic opening with timer pressure: 3.3 kg/cm2 n.4 racks for smooth movement of the lower plate Cjdpfx Abezwphpershd hydraulic motor power : Hp 2 electric plates: Kw 17,8 overall dimensions: 3300 x 1550 x 1900 mm weight: 2800 kg volts 400/50 total installed electrical power Kw 22,5 ability to set separate temperatures for the plates daily programming for automatic turning on the machine heating the plates are composed of a chipboard support and a 12 mm thick aluminum plate containing the heating elements. the Digit series is equipped with an electronic control panel for managing the pressing parameters (temperature, pressure, and closing time)

Condition: excellent (used), functionality: fully functional, Shelf length: 2200 mm Codpfsz D Ewqox Abrshd Shelf width: 1000 mm 2 hydraulic cylinders Clearance: 510 mm Cold press, no heating Pump motor power: 1.1 kW

Condition: ready for operation (used), Year of construction: 2007, machine/vehicle number: 157090207, functionality: fully functional, pressing force: 180 t, stroke length: 325 mm, No minimum price – guaranteed sale to the highest bidder! TECHNICAL DETAILS Press force: 180 t Max. hydraulic pressure: 600 bar Cylinder stroke: 325 mm Opening: 325 mm MACHINE DETAILS Control: Electronic control with operating panel/CNC Codoznmb Ispfx Abrshd Voltage: 400 V / 50 Hz Design: Industrial design EQUIPMENT Enclosed safety cabin Hydraulic press system Heating plate press Molding press

Condition: excellent (used), Year of construction: 2000, functionality: fully functional, plate length 3000mm plate width 1300mm oil heating with electric heater 6 hydraulic pistons pistons diameter 85mm Cjdpez D Afrefx Abrohd plates span 650mm pressure 3kg/cm2 pump motor power 2,2kW

Condition: new, Year of construction: 2025, functionality: fully functional, overall weight: 3,600 kg, Shelf length: 3000 mm Shelf width: 1300 mm Clearance: 400 mm 6 hydraulic cylinders Codez D Agpspfx Abrehd Piston diameter: 85 mm Machine control via touch panel Built-in electric oil heating Electric time-controlled opening Safety breakaway cable Year of manufacture: 2025, NEW Control system: logic control Overall dimensions: Length: 360 cm Width: 160 cm Height: 203 cm

Condition: new, Year of construction: 2023, For sale: a new, unused SPANEX SHB RS 55–70 briquetting press, manufactured in 2023. The package includes a separate intermediate hopper designed to feed wood chips and dust from an extraction system into the press. The press was purchased for our own production facility but was never installed or commissioned. Chsdjz Eqfcjpfx Abrod It is stored disassembled on pallets, as shown in the actual photographs. The intermediate hopper is a separate unit, approximately 1.5 × 1.5 m. Included in the sale: • SPANEX briquetting press • Hydraulic unit and control cabinet • Intermediate hopper Technical information: • Briquette diameter: Ø 70 mm • Published output for the SHB RS 55–70 series: 50–90 kg/h, depending on the material • Custom configuration with a more powerful motor than the standard series specification The actual output of this particular configuration has not been tested. The exact installed motor rating can be confirmed from its nameplate. The first gallery image is a concept visualization showing a possible installation beneath a dust extraction unit. The remaining images show the actual equipment offered for sale. The large dust extraction unit is not included. Connections and installation will need to be adapted to the buyer’s system. The equipment is located in Latvia and can be inspected by appointment. We can assist with loading and transport arrangements.

Condition: excellent (used), functionality: fully functional, Motor power: 5.5 kW Briquette diameter: 80 mm Sawdust level sensor Chjdpfjz Ehf Hsx Abrsd Operating hours: 6363 h Hopper diameter: 1200 mm Adjustable feed rate Year of manufacture: 1996 Power supply: 380 V

Condition: excellent (used), A) Furniture Carcasse (Case) Continous Press Clamp (with CNC) "LIGMATECH" Mod. MDE 110/28/08 Cedpslkbn Ijfx Abrehd - Motorized conveyoring and carcasse-assembling Carpet (through-feed the Clamp) - Adjustable feeding speed m/min 12-40 - CNC Power Control 22 T - Total installed power Kw 14 - Total length of the machine mm 6220 Machine ables to process furniture cabinets (corpus) with dimensions: - Min/Max Length (Min/Max): mm 250 /2800 - Min/Max Depth - Width (Min/Max): mm 120 /800 - Min/Max Height (Min/Max): mm 280 /1320 B) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000) C) Motorized transport carpet Mod. MTB 200/20/08 (length mm 2000)

Condition: excellent (used), Year of construction: 1965, functionality: fully functional, Veneer Press JU 60 Press size: 2200 x 1200 mm Heating plate damaged (see photos), heating plate is functional Cjdpfx Ajmhguajbrehd Year of manufacture: 1965, heating 12 kW Loading costs extra (forklift rental approx. €500) Transport available at additional cost!

Condition: good (used), Hydraulic gluing press for solid wood, e.g. window and door scantlings, solid wood panels, etc. Working length: 5 m. Working height: 1.53 m. Working depth: 0.10 m. Hydraulic unit: 2.2 kW. 10 hydraulic press cylinders. 5 pneumatic hold-down clamps. Max. pressing pressure: 150 kg/cm². Hydraulic unit: 2.2 kW. Chsdpfx Aoxiu Dgsbrsd

Condition: new, functionality: fully functional, Equipment: documentation/manual, | price list | prices | prices | prices | prices | prices | prices | prices | > > > > > ecomas.pl/price-list < < < < < You can view the prices at the very bottom of the listing: Documents / 20215835-01.pdf We offer a high-quality, low-speed pellet granulator. The pellet mill is 100% manufactured in our plant at ECOMAS Polska Czernikowo. We guarantee equipment designed to operate continuously in a 24/7 system. Our machines produce pellets that meet EU standards – properly compacted, free of harmful additives, with a calorific value of at least 4.6 kWh/kg. The main advantage lies in modern, hardened dies and rollers (60HRC+), manufactured with CNC technology. Our dies ensure high efficiency, low power consumption, and long service life of both dies and rollers. Another benefit is the lubrication of the main shaft with oil and oversized bearings, which significantly slows down wear! Are you struggling with your current granulator – bearing failures, low efficiency, clogged die, high power consumption, rapid wear of parts, etc.? With our machines, these problems disappear. We approach each customer individually! See how our machines produce, type in YouTube: ecomas_polskie_peleciarki Available power options: 7.5kW, 11kW, 15kW, 18.5kW, 22kW, 30kW, 37kW, 45kW up to 55kW. Composition: - complete head with 2/3/4/5 rollers on cylindrical bearings Chedpsxk Ta Njfx Abrjd - welded body – fully filled with Orlen Oil Transol VG 320 - cylindrical-bevel gearbox (efficiency 98%) - base frame - bolted dies fi 230, fi 260, fi 285, fi 310, fi 400, fi 520; hole diameters 3, 4, 5, 6, 8, 10mm (100% stability, easy disassembly, and temperature control) - standard oil tank or optional tank with pump and oil installation (oil lubrication, easy oil replacement) - user manual - 12-month warranty The buyer receives a detailed operating manual and a one-year warranty. We provide full warranty and post-warranty service.

Condition: new, Year of construction: 2026, We offer: Pellet machines from the WALW-Solutions brand, characterized by unique quality, honest workmanship, and a fair price. Honest Workmanship: We produce our systems directly in Poland. Only components such as gearboxes and motors are purchased from reputable manufacturers. Everything else is designed and built in-house, which allows us to meet every requirement. Fair Price: We produce in Poland, and we stand by that. Other competitors, who advertise their products as "Made in Germany," only assemble them in Germany and typically source components from Lithuania. We enable you to benefit from our low production costs, resulting in our offer price being typically 40% lower than that of our competitors. These machines for pellet production are entirely new to the market in this price/performance segment and are unique in Europe! Machines from WALW-Solutions are available exclusively through us! From systems for processing in-house sawdust from firewood production or from your carpentry shop, to the professional production of pellets on an industrial scale from wood chips, straw, miscanthus, and more – and also for the production of hay or straw bales, we can provide you with the right solution! Our systems have a capacity of 150 kg/hour up to 5 tons/hour and include all the necessary components to implement a fully automated system. For all raw materials, we find the appropriate solution or methods to integrate automation into existing systems. Chjdpfx Abelt Ugtjrod All machines and controls are equipped with components from Siemens, ABB, Schneider Electric, etc. Please note that net purchase is possible if you have a valid VAT ID! We look forward to your inquiry! If you are interested, please contact me directly by mobile at:

Condition: as good as new (ex-display), Year of construction: 2026, Machine for sale at a special price Machine available immediately (ex works Neckartailfingen) Demonstration machine Your advantages: + Very robust, simple technology + Excellent price-performance ratio + Suitable for continuous operation + Long-standing, well-functioning/established machine Includes control cabinet with timer operation The press is switched on manually and then runs until the set time on the timer has elapsed (e.g. 4 hours). Then the press switches off. Technical data: Briquet dimensions: 30/35 mm (square) Briquet length: 5-35 mm *depending on the material Throughput capacity up to a maximum of 25 kg/h *depending on the material Machine dimensions approx.: 137 x 75 x 148 cm (length x width x height) Machine weight: approx. 250 kg Capacity of the hopper: approx. 250 liters Motor: 2.2 kW, 400 V - 50 Hz Noise emission: 62 dB Requirements for raw material: -Wood shavings and dust smaller than 15 mm in length -Moisture content less than 15% ATRO -Sand, stones, metals, and minerals increase wear --- Options available at an extra cost: -Timer function + €490 net Machine is started manually and switches off automatically after a set time X. -Level sensor for automatic operation + €1,450 net Press starts and stops automatically * NEW!!! Also available in 230 volts, Motor then 3 kW instead of 2.2 kW, Additional cost + €690 net (delivery time then approx. 8 weeks) Chedjfci D Aepfx Abrsd ---

Condition: used, Pellet presses Manufacturer: Bühler Codpsw Iy T Sjfx Abrshd Model: RPWPR 900.138 EX 4 presses - Bühler 3-4 tons per hour 4 mixers 4 feed screw conveyors 20 m long stainless steel chain conveyor 16 m long output conveyor Soft starters

Condition: used, Pellet press Csdpjy E Rrbjfx Abrohd Manufacturer: CPM Model: 7930-4 Year: 2019 Complete with feed mixers