Condition: used, functionality: fully functional, Manni shelving press for veneering, 2500×1300 Crjdpfx Aezmh Ndspmei Shelf length: 2500 mm Shelf width: 1300 mm Feed height: 410 mm Working pressure: 300 bar Press with 4 cylinders

Condition: used, Brand:Comil Type:CF2000 E+N Automatic cabinet press Comil Techn info: Working length 2500mm Working width 600mm Working hight 1200mm Max throughfeed width 720mm Feedingspeed 7,5-37,5m/min Adjustable time for the horizontal pistons 6,85m/min Crsdpfxjimdx To Apmsi Woring air pressure 6-8 bar Consumption per working cykle 115dm3 Power 400 volt, 50 Hz, 3 phase Machine dimension:7050x720x2600/3680mm (lengthxwidthxhight) max max hight with pistons up) Stock no:2000365BXA Note:The film shown is from a simular machine

Condition: like new (used), Year of construction: 2014, briquette diameter: 150 mm, overall weight: 3,000 kg, power: 30 kW (40.79 HP), Capacity: 450-500 kg/h Max. pressure force: 1700kg/cm2 Batch moisture content: 15% Length: 1800 mm Width: 1800 mm Csdpfxeqd Uy Ae Apmori Height: 1900 mm Transport height: 2200 mm Weight: 3000 kg Total power: 33 kW

Year of construction: 2016, condition: reconditioned (used), press aggregate with 2 hydraulic press arms around the glued board slats in the mechanical press offset free Codped Dcmqjfx Apmeri to press. (instead of using a big hammer or big weights on the crane hook)

Condition: as good as new (ex-display), Year of construction: 2021, input current: 81 A, input frequency: 60 Hz, type of input current: three-phase, total length: 1,830 mm, total width: 1,618 mm, total height: 2,400 mm, overall weight: 5,000 kg, operating temperature: 140 °C, cylinder diameter: 65 mm, opening width: 100 mm, Shelf press for veneer , plywood , MDF, particle board, solid wood, etc. Manufacturer : JOOS Model: HPS 20 year of production 2021 Crsdpfx Apot Eq E Sjmsi Total pressure force : 200 kN 4 cylinders ⌀ 65 mm x 400 mm Maximum hydraulic working pressure : 150 bar Pressure : 2.0 daN / cm2 5 heating plates size : 1000mm x 1000mm Operating temperature : 0℃ - 140℃. Infinitely adjustable temperature. Timer to set the working time , after the set time the press automatically opens. Heating power - 5 x 12 kW Total power - 64 kW (81A , 60Hz) Weight - 5000 kg Press new - never used Full technical documentation included.

Condition: used, functionality: fully functional, working width: 3,000 mm, HOT PRESS MANNI - Platen dimensions 3000x1300 mm - N. 6 cylinders - Boiler with hot water - wooden waste Cjdpfxox Rqtio Apmjri

Condition: used, functionality: fully functional, VERTICAL CLAMP FOR WINDOWS ITALPRESSE Crsdpfxsx Rrp Ej Apmoi

Condition: used, SECOND-HAND MULTIPLATENS BENDING PRESS - 7 platens - Platen dim. mm. 800x800 - Opening mm. 1600/1800 - Cylinder diam. 350 mm. Crodpfxewry H Uj Apmei

Condition: used, SECOND- HAND BENDING PRESS FORGIARINI - Platens dim. mm. 1400X800 Cedjwr Advepfx Apmori - Light 900 mm. - 2 cylinders mm. 100

Year of construction: 2002, condition: used, SECOND-HAND HYDRAULIC CLAMP WITH FOLDING BENCHES RODEA MOD. S - CE RULES Crjdpfxewr A Stj Apmoi - Year 2002

Condition: excellent (used), Shelf length: 250 cm Width: 130 cm Four actuators Cjdpexgnp Djfx Apmsri

Condition: used, Year of construction: 1993, Used machine Year of construction 1993 Automatic frame press Working area 3550 x 2400/2600 mm pressure range 120 bar Pressure per 21000 N/kp Cylinder stroke vertical 250 mm, horizontal 20 or 80 mm Automatic control Electrical connection with medium pressure bar Special equipment: Impulse "Open press" Crodsw I Ui Ujpfx Apmji Vertical positioning device Width compensation allowance for 1 MB 1 additional horizontal pressure cylinder Spring weight compensation Work safety device pull rope Installation dimensions 5150 x 1500 x 3340 mm Weight 2500 kg Electrical connection 3.5 kW Compressed air connection R 3/8" max 8 bar Availability: short term Location: Röllbach

Condition: used, SECOND HAND BENDING PRESS - Plates dimensions mm. 3100X800 Credpfjrnnqtex Apmsi - Opening mm. 800 - 8 cyl. diam. 80 mm.

Condition: used, Year of construction: 1994, Frame press, Schafberger & Sprödhuber Type Super Cedpfjilurnex Apmjri 4 kW 3 m x 6 m

Condition: excellent (used), MEMBRANE PRESS For overlaying MDF shaped workpieces with PVC, PP and PET With VARIOPIN system Crjdpfxsrwxz Ro Apmji Double Automatic front loading/unloading and preparation table (1500 x 2800 mm tray) Max pressure 2,400 KN Working pressure 320 BAR Dimensions of the Platens tables mm 1500 x 2800 Useful working dimensions mm 1250 (or 2 x 600) x 2550 Front loading side from mm 1500 (useful width mm 1250) Separate electrical cabinet and controls ( Electronic Programmer SIEMENS SIMATIC Panel Touch Total Installed power KW 50 ca. OPTION: "Paternoster" reels Store (magazine) Unwinder (reels holder) with coating sheet cutting system

Condition: excellent (used), Maweg Vertical Press Working length: 500 cm Working height: 280 cm Cjdpfx Aohglr Dspmori Pressure: 160 kPa

Condition: excellent (used), Block press horizontal 5000 mm length 800 mm width 12 cylinders 5 hold downs Cjdpfjl D T D Eox Apmsri

Condition: like new (used), Automatic pressing line (short cycle), useful to apply veneer, paper or laminates, composed of: V03022) Loader (Portal) "SAG" Double-station (of pick-up) with central motorized rollers table V03023) Brushing machine (to top and bottom clean the panels) "POLIMA"  V03024) Glue Spreader "OMMA" V03025) Motorized Conveyoring Disks way "OMMA" V03026) Preparing table for the panels and motorized in-feed carpet to the press "SIMI" V03027) Short cycle hot hydraulic Press "SIMI IMPIANTI" mm 1400 x 4500, with No. 10 pressing cylinders V03028) Unloader-stacker (Portal) "SAG" Double-station (of storage) with central motorized rollers table Crjdpfxjdun Nio Apmsi

Condition: as good as new (ex-display), Technical specifications: Total pressing force max. 700 kN Setting range 10 – 100 % Total pressing surface 2500 x 1250 mm Specific pressure at full charge 2,2 daN/cm² (kg/cm²) 4 cylinders 80 mm diameter 400 mm stroke Operating hydraulic pressure 348 bar Daylight height 400 mm Heating platens: Electric heating platen 2500 x 1250 mm, surfaces are anodized and therefore extremely hard, resistant against scratches and abrasion. Thermic high pressure insulation between the heating platen and the pressing table. Crsdpfx Apsfhqhasmoi Maximum operating temperatures 120°C.

Condition: new, Year of construction: 2026, The Concept Eco and Concept Primus are the ideal assembly support for dowel construction at the case goods as well as drawer production. Short introduction: • With workpiece tolerance compensation (System GANNOMAT) • 2 Potentiometer for stepless adjustable pressing force • Pressing force min. 300/500 daN (kg) at Concept Eco resp. Pressing force min. 600/800 daN (kg) at Concept Primus • Pressing force max. 2200 daN (kg) at Concept Eco resp. Pressing force max. 3500 daN (kg) at Concept Primus Cedpfx Apodx R Dmjmeri • 3 Pressing velocities and adjustment rates 5 /10 / 25 mm/sec. (with fine positioning / creep feed) • Adjustable clamping cycle time with automatic opening • Simple operation by 6 individual push buttons for 8 motion sequences

Condition: new, Year of construction: 2025, IDEAL FOR STAIRCASE CONSTRUCTION other versions available upon request - 5 levels - Clamping depth 1050 mm - 1 pressure bar, 1500 mm long, 60 mm high, per level - 3 continuously adjustable pivoting counter supports, 400 mm long, per level - 2 pressure plates with handwheel, per level - 5 support arms, per level - all support arms with plastic pads (glue-resistant) Crjdpfxegu D Rms Apmsi - maximum clamping length 1600 mm - Powder-coated (glue-resistant): gray-white RAL 9002, moving parts light blue RAL 5012 - The presses are delivered ready for operation, complete with pressure regulating valve and standard air connection.

Condition: excellent (used), functionality: fully functional, Stromab STA 2500 pneumatic assembly press Working length: 2500 mm Working width: 1200 mm Clamping force at 8 bar: 2600 kg Cedpfxjzhv Tys Apmori 2x side clamping Pneumatic control CE certified

Condition: used, Comafer Dinamic 70/60 briquetting machine Engine power: 5.5 kW, Csdpfx Apozh I Ipemsri Briquet diameter: 70 mm, Output: approximately 70 kg/h Hopper diameter: 100 cm Weight: approximately 1,000 kg The machine is in good working order and can be tested before purchase.

Condition: excellent (used), functionality: fully functional, shelf length: 3000 mm shelf width: 1300 mm integrated, electrically powered water heating system 6 hydraulic cylinders 5 loading cycles safety shear pin Crsdpfx Apszx Aicjmei CE marking

Condition: excellent (used), functionality: fully functional, shelf length 3000 mm shelf width 1300 mm Crjdpfxszxp R Ho Apmsi water heating 6 vertical hydraulic pressing pistons diameter of pistons 70 mm 3 hydraulic thrust pistons for stop movement diameter of pistons 80 mm 6 horizontal hydraulic cylinders loading table 1800x3000 mm unloading table 1500x3000 mm