Used pumps for sale (607)

Condition: used, functionality: unexamined, For sale: Flygt 2051.160 submersible pumps, designed for water pumping and drainage applications. Maximum capacity is 18 m³/h, which equals 18,000 liters per hour or 300 liters per minute. Actual capacity depends on the lift height and operating conditions. The stated price applies to one unit. The three pumps shown in the pictures are sold separately. Technical specifications: Manufacturer: Flygt Model: 2051.160 Maximum flow rate (Qmax): 18.0 m³/h – 18,000 l/h Power: 1 kW Rated voltage: 380/220 V Connection: star/delta Rated current: 2.4/4.1 A Three-phase motor Fsdpe Aibrfefx Aanspp Frequency: 50 Hz Rotational speed: 2850 rpm Operating mode: S1 – continuous operation Power factor cos φ: 0.89 Insulation class: F Weight: approximately 25 kg Manufactured in: Sweden Equipment: Carrying handle Lower suction basket Side discharge nozzle with hose connection Power cord The pumps are used, with visible signs of wear, dirt, and paint coating damage. The visual condition and equipment are shown in the pictures. The item for sale is one pump. Price per unit.

Condition: used, functionality: fully functional, For sale: an industrial submersible pump, Flygt 2610.171, designed for pumping water and drainage applications. The pump’s capacity is 40 m³/h, which is 40,000 liters per hour. The actual flow rate depends on the lift height and installation conditions. The pump is equipped with a float switch, a power cable, and a control module with a CEE power plug. A carrying handle facilitates transport and lowering of the unit, and the lower suction basket prevents larger debris from entering the pump. Technical specifications: Manufacturer: Flygt / ITT Water & Wastewater AB Model: 2610.171 Capacity: 40 m³/h – 40,000 l/h Power rating (as per nameplate): 1.2 kW Fodpfo Aibdcox Aanspp Power supply: three-phase Voltage: 400 V star (Y) / 230 V delta (Δ) Rated current: 2.7 / 4.7 A Frequency: 50 Hz Rotational speed: 2740 rpm Operating mode: S1 – continuous operation Ingress protection: IP68 Maximum medium temperature: 40°C Power factor cos φ: 0.85 Weight: approximately 19 kg Made in: Sweden Included in the set: Submersible pump Float switch Power cable Control module with switch and indicator lights CEE power plug

Condition: new, Year of construction: 2022, functionality: fully functional, For sale: a new KSB Delta Primo SVP 3/0402 M pressure boosting system, equipped with three KSB Movitec V 4/2 B vertical pumps, each with an individual PumpDrive variable frequency drive. The system is designed for boosting and maintaining pressure in water systems. System data from the nameplate: Manufacturer: KSB Model: Delta Primo SVP 3/0402 M ID: 05082258 Date of manufacture: 17th week of 2022 Power supply: 3 × 400 V, 50 Hz Maximum current: 5.2 A Nominal system pressure: PN10 Protection rating: IP54 Control based on a pressure transducer Manufactured in: Netherlands Parameters of a single pump: Model: KSB Movitec V 4/2 B Flow rate at the point indicated on the nameplate: 4.01 m³/h Head at this point: 14 m Power rating on the nameplate: 0.55 kW (0.26 kW), 50 Hz Rotational speed: 2900 rpm Connections: DN32, PN16 Temperature range specified for the pump: from -20 to +100°C KSB SuPremE motor, efficiency class IE5 Equipment: 3 KSB Movitec pumps 3 KSB PumpDrive variable frequency drives Control cabinet with operating panel and main switch Stainless steel manifolds Isolation valves Pressure gauge and pressure transducer Diaphragm tank Common mounting frame Operating and installation manual Condition: new. The system shown in the photos is for sale. Fedpfx Ae Aibfwoanspp

Condition: excellent (used), functionality: fully functional, For sale: an industrial KSB ETABLOC-MN 32-200/752 centrifugal pump with a 7.5 kW electric motor. It features a monobloc design with an axial suction nozzle and a vertical discharge nozzle, both equipped with flanged connections. The rated capacity is 18 m³/h, or 18,000 liters per hour, at a head of 62 m, as indicated on the pump nameplate. Pump data: Manufacturer: KSB Model: ETABLOC-MN 32-200/752 Fpede Aibrbspfx Aanep Rated capacity Q: 18 m³/h – 18,000 l/h Head H: 62 m Rotational speed according to the pump nameplate: 2940 rpm Year of manufacture: 1992 Nameplate number: 4-925-177653/1 Motor data: Power: 7.5 kW Rated voltage: 500 V, delta (Δ) connection Rated current: 11.8 A Frequency: 50 Hz Rotational speed: 2910 rpm Protection class: IP54 Insulation class: F Power factor cos φ: 0.84

Condition: new, Year of construction: 2019, functionality: unexamined, WILO EMU FA 10.62E SUBMERSIBLE SEWAGE PUMP – 5 kW 400 V ATEX WILO EMU FA 10.62E – PROFESSIONAL SEWAGE PUMP FOR PUMP STATIONS AND SEWERAGE SYSTEMS For sale is an original WILO EMU FA 10.62E submersible sewage pump with an FK17.1-4/12KEx motor, 5 kW power, and 400 V three-phase power supply. Fjdpfe Aibg Rox Aanjpp This is an industrial sewage pump designed for the transport of municipal and industrial wastewater, as well as contaminated liquids, in appropriately designed installations. The pump from the German manufacturer WILO belongs to the professional EMU FA series, used in water and sewage installations, sewage pumping stations, and wastewater treatment plants. Key parameters: • Manufacturer: WILO – Made in Germany • Model: EMU FA 10.62E • Motor power: 5 kW / 5000 W • Supply voltage: 400 V, three-phase • Nominal flow rate: 115.6 m³/h – 115,600 l/h • Nominal head: 9.1 m • Year of manufacture: 2019 • Protection class: IP68 • Motor design: Ex / ATEX POWERFUL SUBMERSIBLE SEWAGE PUMP – KEY FEATURES HIGH EFFICIENCY – 115,600 L/H The pump’s nominal flow rate is 115.6 m³/h. The unit is designed for transporting large volumes of wastewater in professional pumping systems. 5 KW / 400 V INDUSTRIAL MOTOR Three-phase WILO FK17.1-4/12KEx motor with a rated power of 5 kW, designed for operation in industrial installations. IP68 SUBMERSIBLE PUMP Design intended for submerged operation. The maximum immersion depth according to the nameplate is 20 m. EX / ATEX EXPLOSION-PROOF DESIGN The pump is equipped with a motor with a factory Ex marking. Use in explosion-hazard areas requires the specific installation to comply with the manufacturer’s documentation and applicable requirements. ROBUST HYDRAULICS FOR WASTEWATER Centrifugal pump with hydraulics designed for transporting wastewater and liquids containing contaminants. According to the FA 10.62E series documentation, a single-channel impeller is used. TECHNICAL DATA – WILO EMU FA 10.62E Parameter Value Brand WILO Series EMU FA Model FA 10.62E Motor type FK17.1-4/12KEx Type Submersible sewage pump Rated power P2 5.00 kW Power supply 3 × 400 V Frequency 50 Hz Rated current 10.80 A Motor speed 1400 rpm Nominal flow rate 115.6 m³/h Nominal head 9.1 m Protection class IP68 Operating mode S1 Maximum medium temperature 40°C Maximum immersion depth 20 m Impeller diameter 220 mm Design Ex / ATEX Year of manufacture 2019 Country of manufacture Germany The stated flow rate and head values refer to the pump’s nominal operating point.

Condition: as good as new (ex-display), Grundfos CRNE1-9 Vertical multistage pump Fedpfevw Sqdex Aanspp Vertical, multistage centrifugal pump with inlet and outlet ports on same the level (inline). Pump materials in contact with the liquid are in high-grade stainless steel, see plate for full spec, 2 in stock

Condition: used, Wilo DL-E 100/145-11/2-S1 Dry-running Twin Pump Dry-running twin pump in an inline design for pipe installation or base mounting, with an integrated frequency converter for electronic control, among other things, for constant or variable differential pressure (Δp-c/Δp-v). Design Electronically controlled dry-running twin pump in an inline design with flange connection and automatic performance adjustment. Application Pumping of heating water (according to VDI 2035), cold water, and water-glycol mixtures without abrasive substances in heating, cold water, and cooling systems. Equipment/Function Operating modes Δp-c for constant differential pressure Δp-v for variable differential pressure PID control Controller operation (n=constant) Manual control mode Setting of the differential pressure setpoint Setting of the speed (manual control mode) Setting of the operating mode Setting pump ON/OFF Configuration of all operating parameters Error acknowledgment External control functions Control input "Priority OFF" Control input "External pump switchover" (only effective in twin pump operation) Analog input 0-10 V, 0–20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 2–10 V, 4–20 mA for controller operation (DDC) and remote setpoint adjustment Analog input 0–10 V for actual value signal of the pressure sensor Analog input 2–10 V, 0-20 mA, 4–20 mA for actual value signal of the pressure sensor Alarm and display functions Collective fault message SSM Collective operating message SBM Data exchange Infrared interface for wireless data exchange with IR monitor/IR stick Slot for Wilo IF modules (Modbus, BACnet, CAN, PLR, LON) for connection to building automation Safety functions Full motor protection with integrated tripping electronics Access lock Twin pump management (twin pump or 2 x single pump) Main/standby operation (automatic fault switchover) Main/standby operation, pump switchover after 24 hours Addition operation Addition operation (efficiency-optimized peak load switching on/off) Your advantages Energy savings thanks to integrated electronic performance adjustment Easy operation thanks to Green Button technology and display Various operating modes: main/standby operation and parallel operation Configurable error behavior tailored to heating and air conditioning applications Integrated full motor protection (FMP) with tripping electronics Drive Power connection 3~380 V, 50/60 Hz 3~400 V, 50/60 Hz 3~440 V, 50/60 Hz Motor efficiency class: IE4 Power input P1 max: 13000 W Motor rated power P2: 11 kW Current (max) Imax: 21 A Speed max. nmax: 2970 1/min Emitted interference EN 61800-3 Fpjdpfx Aaswbqrtjnsp Immunity to interference EN 61800-3 Insulation class: F Motor protection: IP55 Motor protection: FMP integrated Installation dimensions Installation length L0: 500 mm Suction-side pipe connection DNs: DN 100 Discharge-side pipe connection DNd: DN 100 RRP: 29,006.25 € More items, new and used - find them in our shop! International shipping costs on request!

Condition: used, Three-pump vacuum unit with control cabinet for food processing plants This used unit consists of three Bora vacuum pumps, type SAP 450, mounted on a single shared frame. Each pump has a filter housing on top and all three are connected to a common manifold. The accompanying control cabinet holds three Omron Hitachi frequency inverters (JX series, 4 kW, 400 V). It also contains a Moeller controller with display and motor protection switches. Three rotary switches are fitted in the door. The frame stands on adjustable feet. Located in Emmeloord, the Netherlands. Immediately available, price on request. More photos and full specifications: / Type: Vacuum unit with three pumps and control cabinet Pumps: 3 × Bora SAP 450, on a shared frame with common manifold Frequency inverters: 3 × Omron Hitachi JX, 4 kW, 400 V Controller: Moeller controller with display, motor protection switches Frame: On adjustable feet Fpodpoz Nc Iqefx Aanep

Condition: good (used), For sale: a used Hidrostal industrial submersible pump, complete with cables, float switch, control module, and a metal discharge pipe terminated with a Storz-type coupling. The pump has a transport handle and a wide base for stable positioning. Data read from the nameplate: Manufacturer: Hidrostal Type designation: Hidrostal C0CQ-L01 + CNBA2-GXEQ 3 kW with control – the remaining part of the designation is unreadable. Motor number: 116322 Output power P2: 3 kW Input power P1: 3.8 kW Supply: 380–420 V, three-phase Frequency: 50 Hz Rated current: 6.4 A Rotational speed: 2730 rpm Power factor cos φ: 0.86 Winding connection: delta (Δ) Insulation class: F Maximum ambient temperature: 40°C Marking on the nameplate: EEx d IIB T4 ATEX marking number: 99 ATEX 1079 Fpsdj Aibc Aopfx Aansp Included equipment: Pump with motor. Power and control cables. Control module with indicators. CEE power plug. Float switch. Metal discharge pipe with Storz-type coupling. Base and transport handle.

Condition: used, Watson Marlow 120U/DV Peristaltic Pump *New price 9,100 The pumps in the 100 series are the ideal choice for maximizing yield in fermentation and cell culture applications. These pumps not only offer high performance and reliability but also ease of use for single-use systems. Flawless tubing changes take only a few seconds, which further increases the efficiency of your processes. Biopharmaceutical processes require precise and repeatable pump performance that is easy to validate. Our 100 series offers exactly this flexibility and purity with its exceptional speed range of 2,000:1, which is essential for drug testing. The keypad lock secures your pump parameters to ensure consistent and repeatable performance. Technical data: - Enclosure protection class IP 31 - Maximum pressure 30 psi - Model 120 U/DV - Flow rate 0.001 to 170 ml/min at 30 psi - Motor speed 0.1 to 200 rpm - Temperature 5 °C to 40 °C - Pump weight approx. 2 kg - Torque 0.4 Nm continuous operation - Noise level < 60 dB(A) at a distance of 1 m - Standard CE, cETLus - Power supply Supplied with 24 VDC mains transformer plug Condition: used Fpjdpfjttzgdsx Aansp You can find more laboratory equipment – new and used – in our shop! International shipping costs on request!

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 2: Fpjdpfxjxbhtre Aansp KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part no.: 48875108 Single-stage volute casing pump with nominal ratings according to EN 733, equipped with a KSB IEC three-phase motor, protection class IP 55, insulation class F, flange-mounted to form a monobloc unit. Pump shaft is rigidly connected to the motor shaft. Fitted with an uncooled mechanical seal, corrosion-resistant shaft sleeve, and replaceable wear rings. Drive lantern made of grey cast iron, with contact protection according to EN 294. Mounting via support foot up to motor size 112, and via motor foot from motor size 132 onwards. Volute casing: Grey cast iron Impeller: Grey cast iron Shaft, pump: Tempered steel

Condition: used, Year of construction: 2007, functionality: fully functional, overall weight: 221 kg, input voltage: 400 V, input frequency: 50 Hz, input current: 54 A, Device No. 1: KSB Blockp Etabloc 65-200/3002 GN10 IEC standard motor KSB 30 kW 2900 rpm Part No.: 48875108 Single-stage volute casing pump with rated capacities according to EN 733, fitted with KSB IEC three-phase motor, protection class IP 55, insulation class F, assembled as a block unit. Pump shaft rigidly coupled to motor shaft. Equipped with uncooled mechanical seal, corrosion-resistant shaft sleeve, replaceable wear rings. Drive lantern made of cast iron, with contact protection in accordance with EN 294. Mounting by support foot up to motor size 112, by motor foot from motor size 132 upwards. Fsdpfsxbhtlsx Aanspp Volute casing: Cast iron Impeller: Cast iron Shaft, pump: Tempered steel

Condition: used, Watson Marlow 323S/D Peristaltic Pump *New price: 9890 The pumps in the 323 series feature a chemical-resistant ABS top and IP31 protection, as well as a foil keypad for controlling the pump and a digital LCD for displaying the speed. Fpodpotnct Uefx Aanjp - 323S high-performance pumps with manual control - Universal pump for precise dosing or transfer applications - Flow rate range: 0.1-2000 mL/min - Speed range: 3 to 400 RPM (adjustable in steps of 1 RPM) - Display type: LCD - Reversible: Yes - The pumps in the 323 series feature a chemical-resistant ABS top and IP31 protection, as well as a foil keypad for controlling the pump and a digital LCD for displaying the speed. - Dimensions (L x W x H): 230 x 230 x 132 mm - Condition: Used You can find more laboratory equipment – new and used – in our shop! International shipping costs available upon request!

Condition: new, Year of construction: 2024, functionality: unexamined, For sale is a brand new, unused KSB KRTF 100-254/54UEG-S submersible pump, manufactured in 2024. This pump is from the renowned German manufacturer KSB and is designed for pumping municipal and industrial wastewater, as well as contaminated water. The device is characterized by a robust construction, high performance, and suitability for continuous operation in demanding industrial environments. Technical specifications: Manufacturer: KSB Model: KRTF 100-254/54UEG-S Condition: BRAND NEW – UNUSED Year of manufacture: 2024 Motor power: 5.5 kW Flow rate (Q): 104.88 m³/h Head (H): 9.10 m Supply voltage: 400/690 V Frequency: 50 Hz Rated current: 10.7/6.2 A Fedpfxs Aibgus Aanjpp Rotational speed: 1437 rpm Ingress protection: IP68 Insulation class: H Maximum medium temperature: 40°C Maximum immersion depth: 30 m Weight: 123 kg Operating mode: S1 – continuous operation Country of origin: France Application: Municipal and industrial wastewater pumping stations Wastewater treatment plants Sewerage systems Drainage systems Industrial plants Water and wastewater management systems Condition of the device: The pump is brand new and has never been used. Year of manufacture: 2024. The device is in very good visual condition, as shown in the attached photos. The set includes: New KSB submersible pump Power cable Original technical documentation Accessories shown in the photos

Condition: used, Year of construction: 2000, feed pressure 2,4 bar liter capacity 2.500 l/h Fpjds Adu Rmspfx Aanjp total power requirement 0,57 kW dimensions of the machine ca. 350x150x200 mm

Condition: new, Year of construction: 2024, NEW Grundfos - The pump is fitted with a 3-phase, fan-cooled, permanent-magnet, synchronous motor. The motor efficiency is classified as IE5 in accordance with IEC 60034-30-2. The motor includes a frequency converter and PI controller in the motor terminal box. This enables continuously variable control of the motor speed, which again enables adaptation of the performance to a given requirement. An operating panel on the motor terminal box enables setting of required setpoint as well as setting of pump to "Min." or "Max." operation or to "Stop". The Grundfos Eye indicator on the operating panel provides visual indication of pump status: "Power on": Motor is running (rotating green indicator lights) or not running (permanently green indicator lights) "Warning": Motor is still running (rotating yellow indicator lights) or has stopped (permanently yellow indicator lights) Fsdsyug Hxopfx Aanepp "Alarm": Motor has stopped (flashing red indicator lights). Communication with the pump is possible by means of Grundfos GO Remote (accessory). The remote control enables further settings as well as reading out of a number of parameters such as "Actual value", "Speed", "Power input" and total "Power consumption". The terminal box has a number of inputs and outputs enabling the motor to be used in advanced applications where many inputs and outputs are required: • two dedicated digital inputs • three analog inputs, 0(4)-20 mA, 0-5 V, 0-10 V, 0.5 – 3.5 V • 5 V voltage supply to potentiometer and sensor • one analog output, 0-10 V, 0(4)-20 mA • two configurable digital inputs or open-collector outputs • two Pt100/Pt1000 inputs • LiqTec, dry-running protection sensor input • Grundfos Digital Sensor input and output • 24 V voltage supply for sensors • two signal-relay outputs (potential-free contacts) • GENIbus connection • interface for Grundfos CIM fieldbus module.

Condition: like new (used), Year of construction: 2010, operating hours: 487 h, functionality: fully functional, overall weight: 1,100 kg, volume flow: 358 m³/h, power: 125 kW (169.95 HP), type of cooling: water, rotational speed (max.): 1,500 rpm, Diesel water pump set, Sprinkler unit with few operating hours, in excellent condition for sale. 358m3/h Manufacturer: SISU Type: 420DSJPL Year of manufacture: 1996/ 2010 new turbo freshly serviced Power: 120 kW, 2940 rpm Pump: KSB ETANORM MX125-250 year: 2010 Capacity: 358 m3/h delivery height: 86 meters Power: approx. 180 HP Weight: 1200 kg self-starting water cooling Fpjdpfx Ajyi H Eqjanjp built on a mobile chassis Operating hours: approx. 473 hours If you need more information, we will help you! Please contact us using the form or call us by phone. Your ad has been automatically translated. Translation errors may occur.

Condition: new, ///// PRICE PER UNIT ///// For sale: professional submersible pump KSB AmaDrainer B 80-40 S – high-quality device designed for operation in demanding conditions (dirty water, sewage, drainage). ✔️ Condition: NEW Fedo Aibakspfx Aanjpp ✔️ The pump has never been used ✔️ Original packaging / wrapping / documentation ✔️ The set includes cable + float switch + controller ⚙️ Technical data: Manufacturer: KSB (Germany) Model: AmaDrainer B 80-40 S Power: 4.0 kW Supply: 400V / 3~ / 50 Hz Current: 8.5 A Protection class: IP68 Capacity: up to 100 m³/h Rotation speed: 2800 rpm Insulation class: B Max. liquid temperature: 40°C Weight: approx. 65 kg ✅ Applications: construction dewatering pumping stations sewage and dirty water industry wells and tanks 📦 Set includes: ✔️ KSB pump ✔️ Power cable ✔️ Float switch ✔️ Documentation ✔️ Original packaging

Condition: used, ARO PD30A-BSS-STT-C Stainless Steel Double Diaphragm Pump The ARO metallic 3" diaphragm pump models achieve flow rates of up to 1041 L/min and are available in a variety of materials. These pumps are often used in industry for transfer, filling, and circulation applications. EXP series diaphragm pumps stand out due to their best overall operating costs and offer an optimal solution with regard to energy efficiency and downtime. Example media* for PD30A-BSS-STT-C: Highly flammable liquids, mineral oils, paints, solvents, acids, alkalis, detergents, wastewater, and more. Suction and discharge connection: 3" BSP Max. flow rate: 1041 L/min. Max. operating pressure: 8.3 bar ATEX certified: Yes Material, media side: Stainless steel Material, air motor: Aluminum Material, diaphragm: PTFE / Santoprene Material, ball: PTFE Material, ball seat: Stainless steel Max. solid particle size: 9.5 mm Air connection: 3/4" NPT Weight: 103.8 kg Manufacturer's price: €20,976.13 Fpsdpfop U T I Hex Aanep You can find more items in other sizes – new and used – in our shop! International shipping costs available upon request!

Condition: used, Air-operated, double-acting high-pressure pump The Resato P200-100-2 is an air-operated, double-acting high-pressure pump used for generating pressure for liquids in various industrial applications, such as hydrostatic testing and chemical injection. The Resato P200-100-2 pump operates on the principle of an automatically reciprocating differential piston to convert compressed air into a high-pressure liquid flow. Manufacturer: Resato Type: P200-100-2/U/V Type: Air-operated, double-acting high-pressure pump Air piston diameter: 200 mm Ratio: 100 Flow rate: 6.6 l/min Weight: 21 kg Year of manufacture: 2019 Max. outlet pressure Fedpfx Ajyk Uc Hjanspp Regulated by the air supply pressure; at 7 bar (100 psi) air pressure, the static final pressure is up to 700 bar (~10,000 psi) (based on the Resato type table for P200-100-1/P200-100-2). Compatible media Suitable for water, oil, or an emulsion of both. Can also be used for a wide range of chemical liquids. Materials (media-contacting) All media-contacting parts are made of specially selected stainless steel. Operating medium (drive) Can be operated with compressed air or nitrogen at a maximum pressure of 7 bar (100 psi). Features Reduced noise generation, minimized downtime through easy maintenance of seals and check valves, freezing of the pump is avoided. Applications The P-series, to which the P200-100-2 belongs, is used in various industries, including the oil and gas industry, automotive engineering, and research. Typical application areas include: Hydrostatic testing of hoses, valves, pipelines, and pressure vessels. Pressurizing hydraulic components. (Chemical) injection. Disassembly of bearings and bolt tensioning. Research and development. You can find more new and used items in our shop! International shipping costs available upon request!

Condition: good (used), Year of construction: 2018, DOPAG P200 2H Drum Pump / Material Transfer Pump Both the standard version and the tandem version are available. Manufacturer: DOPAG Dosiertechnik und Pneumatik AG Product type: Pneumatic drum pump / material transfer pump Series: P200 Version 1: Drum pump P200 2H Version 2: Drum pump P200 2H tandem Operating concept: 2-hand operation Drive: Pneumatic Compressed air supply: 6 bar Maximum container size: 200 l Fsdpfx Aozr Tz Aeanjpp Maximum container height: 880 mm Year of manufacture: 11/2018 Weight P200 2H: 386 kg Weight P200 2H Tandem: 394 kg Material feed: Directly from the original container Pump principle: Piston pump Compressed air treatment: Festo SMC valve type: VSA4244-00-1 The DOPAG P200 systems are designed for the transfer of highly viscous materials from 200-liter containers, e.g. adhesives and sealants or lubricants. Depending on the specific pump configuration, different transfer rates, gear ratios and material ranges are possible. The tandem version enables the use of two material containers within a correspondingly designed transfer system.

Condition: excellent (used), For sale: KSB ETACHROM BC centrifugal pump equipped with a Siemens electric motor. The pump is made of stainless steel and designed for industrial applications. The entire unit is mounted on a base. Pump specifications: Manufacturer: KSB Aktiengesellschaft Model: ETACHROM BC Flow rate Q: 11.00 m³/h Head H: 25.39 m Rotational speed: 2880 rpm Year of manufacture: 2007 Material No.: 00 Serial No.: 9971266604 Flanged connections Fpedpfxs Aibdge Aanjp Motor: Siemens Total weight of the unit: approx. 31 kg The unit has a sticker from the German electric motor repair shop ROCK Elektromotoren Reparaturwerk, indicating that it has been inspected according to VDE, UVV, VBG 4 and DIN standards. The pump is used and in very good visual condition. Condition and completeness are exactly as shown in the pictures. A robust industrial pump from the renowned manufacturer KSB.

Condition: used, Axial Pump, Pump, Andritz 13.9 kW, Used Machine Manufacturer: Andritz Model: HP 50-180.1/2/S Fpsdpfx Ae Ah Ea Sjanep Year: 2020 Flow Rate: 42 m³/h Head: 80 m Electrical data: 400V; 13,9kW; Overall Dimensions: Length: 1090 mm Width: 390 mm Height: 420 mm Weight: 103 kg

Condition: used, Year of construction: 2015, functionality: unexamined, For sale is a well-maintained screw conveyor pump. It was used intermittently over several years in conjunction with a chain hoist. Includes a frequency converter. These pieces of equipment were disassembled in 2024 due to a relocation at the old site and have not been used since. The pump can be connected to power and its functionality can be checked. Inspection is possible at our location in Zurich. Fedpfxez Hm Trs Aanopp

Condition: used, Art. No.: Pum 31 Fpsdpfozxgwkox Aansp Manufacturer: KSB Type: ETANORM MX 100-200 MX 10 Item condition: very good, used Pump comes from a fire extinguishing system and has only been used for test runs. Available: immediately Flow rate: 5,000 liters/min Head: 49.6 m (water column) Revolutions: 2940 rpm Pump impeller: bronze Diesel engine Manufacturer: John Deere Type: 4045DF159 Power: 55 kW Revolutions: 2,940 rpm Year of manufacture: 2012 Operating hours: 37 Tank: 150 liters Control cabinet for automatic operation. The system can also be converted to an irrigation system with 12 bar pressure upon request.