Condition: like new (used), Year of construction: 2010, I sell the combined top + bottom sanding machine LOEWER DSM 2000D, year 2010. Dkoln Newif Rysm Nhol Configuration Top sanding pad + cleaning brush - Bottom sanding pad + cleaning brush . Working width 200mm. Total weight 1500kg Suitable for line. Construction with fixed working table height. Suitable for windows and floors production for fine sanding. Condition like new. Available immediately. Possible to test.

Condition: used, 2-stage switchable main motor, height adjustment of the sanding belt from 0150 mm., table swivel 90 45 degrees, belt speed 12/6m sec Delnovwl Ebs Nm Nhokl

Condition: good (used), Year of construction: 1995, Multi-purpose surface sanding machine, paint sanding machine, assembly kit, finishing unit, sanding unit, sanding station, belt sander, belt sander -Max. Sanding belt width: 1350 mm -oscillating -Drive: 11 kW -Speed: frequency controlled -Max. Passage height workpiece: 140 mm - Sanding belt dimensions: 2620 x 1350 mm Djlnjgnnbvo Nm Nhokl -Dimensions machine: 221H2310 mm -Weight machine: 4500 kg

Condition: ready for operation (used), Selling a sanding machine for wooden handles. It consists of two energy-saving IE3 sanding motors, each rated at 1.5 kW, which drive the two sanding belts, as well as a gear motor for transporting the handles through the sander. The adjustable gear drive for the handles through the sander also allows for sanding oval handles. The machine was discontinued, repaired, and stored approximately one year ago. Doln Nm Nowau Uvohokl

Condition: used, Year of construction: 1991, used, good conditionmake Löwertype LS200year of construction 1991Masch.-Nr. 7428Motor 5,5 kWGrinding width approx. 190 mmGrinding height approx. 120 mmBelt length approx. 1600 mmBelt width approx. 200 mmHeight display analog clock in handwheelwith electrical displayAdjustment manualCombination roller/shoe1-beltSuction connectionSpace requirement approx. 1100 mm x 900 mm x 1650 mmweight approx. 500 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery in as-is condition as viewed,without guarantee and warranty Dkjlnevwfl Ie Nm Nhsl

Condition: excellent (used), Year of construction: 2018, grinding width: 400 mm, working width: 400 mm, grinding belt width: 455 mm, grinding belt length: 1,900 mm, total length: 3,350 mm, overall weight: 4,800 kg, Strip sanding machine / parquet sanding machine Manufacturer: VG Machines Type F/G 455 2 KS / 2KS Year of manufacture: 2018 Machine originates from a parquet manufacturer Line design / road machine (movable upper section) for calibrating and sanding from below and above in one pass Working width: approx. 400 mm Equipped with: 1x calibrating roller from above, approx. 11 kW 1x sanding pad from above, 5.5 kW 1x calibrating roller from below, approx. 7.5 kW 1x sanding pad from below, 5.5 kW Sanding belt dimensions: 455 x 1900 mm Infinitely variable feed rate, max. 16 m/min., motor approx. 2.2 kW Voltage: 400 V Doln Nev Tnatom Nhskl Total connected load: approx. 34 kW Dimensions: approx. 3350 x 1900 x 2000 mm Weight: approx. 4800 kg

Condition: used, Bütfering Sandy E-Line 111 Wide-belt calibration and fine grinding machine Automatic steel contact roller unit Dkeln Nowcnm Rem Nhel CPS electronically controlled segmented sanding shoe unit Cleaning brush unit Working width 1100 mm Feed speed 4 + 8 m/min Motor power approx. 15 kW RTE additional compact roller table in the infeed and outfeed Machine is WORKSHOP OVERHAUL and in TOP CONDITION Ex stock in Lieboch

Condition: used, 2-stage switchable main motor, height adjustment of the sanding belt from 0150 mm., table swivel 90 45 degrees, belt speed 12/6m sec Dkeln Nm Nevwl Ehshsl

Condition: new, Year of construction: 2022, machine/vehicle number: MR004406, Wide belt sander with a maximum working width of 950 mm. The maximum working height of this machine is 170 mm. Price is ready to use, equipped with cord and plug.Machine is equipped with the following options: - Machine compliant with CE regulations. - Activate calibration roller via switch on control panel - Activate sanding shoe via switch on control panel - Automatic table positioning with thickness sensor - Automatic centering through-feed carpet Technical specifications: - Number of sanding units : 1 - Sanding unit 1 type : Combi calibrating sanding shoe - Maximum sanding width : 950 mm - Maximum working height : 170 mm - Minimum working height : 4 mm - Throughput : 4,5/9 /min - Sanding belt length : 1.525 mm - Sanding belt width : 970 mm - Motor power : 10 hp - Serial number : AB00024845 Dkjlnsl Dxgyo Nm Nhel

Condition: not inspected (used), Year of construction: 1979, Functionality: unexamined, working width: 1,100 mm, OTT RSK-0 1100 wide belt sander. Djlnswh Rd Ao Nm Nhjkl Untested condition. To be inspected.

Condition: used, Year of construction: 2015, With sanding unit consisting of: - 1 combo unit, pneumatic sanding pad for steel veneer sanding - Dust brush Vacuum carpet and vacuum system pre-installed Roller table at the inlet 200 mm Roller table at the outlet 1000 mm Constant table - constant infeed height Automatic workpiece thickness adjustment/scanning Machine control via touchscreen Used, excellent condition Make: Bütfering Type: SWT 215 / L Optimat Year of manufacture: 2015 Machine number: Working width approx. 1350 mm Passage height approx. 3-160 mm CE type-tested Belt dimensions approx. 1370 mm x 2150 mm long belts Feed speed continuously variable 2.5-13 m/min. 1 x 15 kW combi unit with profiled steel roller D 160 Diameter 160 mm Pneumatically controlled air shoe Space requirement approx. 1625 mm x 2000 mm x 2300 mm Weight approx. 1500 kg Total connected load approx. 16 kW Dkjljwa Ulusn Nm Nhsl Storage location 97447 Gerolzhofen, free on load, unpacked Sold in the current condition as seen, without warranty or guarantee

Condition: like new (used), Year of construction: 2018, operating hours: 2 h, Functionality: fully functional, overall weight: 130 kg, height adjustment type: mechanical, power: 1.1 kW (1.50 HP), input frequency: 50 Hz, motor voltage: 230 V, Profile and strip sanding machine S 220 Dkoln Nm Newa Nmgshol Year of manufacture 2018 With stop rail With extraction nozzle Machine is available immediately

Condition: used, OTT Alpha 136 Heavy-duty wide belt calibrating and fine-grinding machine Combined sanding unit Deln Njvun Eljm Nhokl Contact roller - Calibration 90 SH Automatic pneumatic sanding pad unit Cleaning and brushing unit Working width 1360 mm Sanding unit motor power 11 kW Semi-automatic, workpiece dimensions Grit compensation for contact roller Total connected load approx. 15 kW Year of manufacture 1988 Machine is CLEANED, FUNCTIONAL and in GOOD CONDITION Ex works from the joinery at a fixed price of €5,000.00 net

Condition: excellent (used), Year of construction: 2016, Holzkraft KSO 200 F edge sanding machine with pivoting sanding unit and oscillating sanding belt. Version for veneer sanding. Serial no. 2227 Worktable length 960 mm Worktable width 350 mm Work table height adjustment 230 mm Sanding unit Swivels via lever up to 45 ° Motor power 3 kW Sanding belt length 3000 mm Sanding belt width 200 mm Sanding surface length 1050 mm Sanding surface width 200 mm Belt speed 20 m/s Oscillation motor 0.25 kW Oscillation stroke 20 mm Oscillation optionally switchable Oscillating sanding belt with separate gear motor for better sanding results Veneer edge sanding device with contact shoe with fine adjustment With grooved infeed guide for veneer overhangs Quick changeover from veneer edges to solid wood possible Extendable roller table extension With double suction unit Electricity 400V, 50 Hz Dimensions ( L x W x H) approx. 1900 x 900 x 1350 mm Weight 300 kg Dksln Nm Nercbk Dohsl (Subject to changes and errors in the technical data as well as prior sale)

Condition: used, Year of construction: 2013, Functionality: fully functional, From the liquidation of the company: Langzauner LZK4 edge sander Year of manufacture: 2013 Delnsv Sd Svo Nm Nhjkl Technical specifications: Table size 1250x400mm Side support table 400x250mm Sanding belt 200x3000mm Pneumatic sanding belt tension Oscillation Sanding beam swivel range 0-45° Sanding table height adjustable Machine weight approx. 500kg Extraction connection 140mm With veneer sanding device Table extension and widening Roller stands

Condition: ready for operation (used), Working width: 1000 mm Combination unit with pneumatic shoe Shoe set automatically Pneumatic belt tensioning Pneumatic oscillation Pneumatically activated shoe (lub: Shoe activated by air blast – w zależności od kontekstu) Electric table adjustment Two feed speeds Doln Newcyapom Nhskl Thickness gauge Abrasive paper: 1030x2100 mm

Condition: used, Wide belt sander or calibration sander Bütfering type Optimat-SCO211RC-Sandy with two belts for pre- and post-grinding The machine can be inspected under power. Dslnjv A Uiys Nm Nhokl Aggregate: 2 Aggregate R: steel contact roller unit C: combination unit with rubber roller and electronic sanding shoe working width: 1.100 mm Included: lot of sanding belts

Condition: new, Functionality: fully functional, working width: 1,100 mm, grinding width: 1,100 mm, grinding height: 170 mm, power: 15 kW (20.39 HP), height adjustment type: electric, grinding belt length: 1,900 mm, grinding belt width: 115 mm, CASADEI LIBRA 35/2 RTC 110 Standard Equipment Two-belt version with 1100 mm sanding width for the cost-conscious tradesman. The LIBRA 35 calibration and fine grinding machine is an extremely versatile and versatile machine. Robust tubular-reinforced monoblock steel machine body with high-mounted working units for maximum rigidity. User-friendly thanks to the clearly laid-out control panel on the front. Motorized table height adjustment. Digital display for the working height. Electronically controlled sanding belt oscillation with reduced compressed air consumption. 1st unit: 120 mm diameter, slanted steel roller with fine adjustment for calibration. Pneumatic on/off of the roller. 2nd unit: Combination unit with finely adjustable working height for calibration and fine grinding: 120 mm diameter rubber-coated roller (45 Sh), hard sanding pad with graphite coating on a replaceable insert. Pneumatic roller on/off Electronic sanding pad, 56-sector spacing Electronic control system FOX 500 KTR Electronic working thickness adjustment Automatic carpet centering ✔ Automatic star-delta start-up for main motor Natural rubber feed carpet with negative profile Support table with two rollers at the inlet and outlet of the feed carpet Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers in front of and behind each working unit Dkelnjwa Dbxo Nm Nhjl Pneumatic belt tensioning for each unit with decimal adjustment of grit/belt thickness Length approx. 1650 mm Width/Depth approx. 1820 mm Height approx. 1960 mm Extraction connection Number of extraction nozzles: 2 Extraction nozzle diameter: 140 mm Electrical data Height adjustment motor power: 0.25 kW Feed motor power 0.33/0.55 kW Drive motor power 15 kW Connection voltage 400 V Line frequency 50 Hz Grinding unit Grinding belt length 1900 mm Grinding belt width 1115 mm Maximum sanding width 1100 mm Feed unit Feed speed 4.5 / 9 m/min Workpiece Min. height 4 mm Max. height 170 mm #### For many years, we have maintained a partnership-based sales concept with specialist dealers, which is why orders are processed through a recommended partner coordinated with you.#####

Condition: used, Year of construction: 2021, Oil application machine LW100.6/300 Two-roller machine - Roller width: 300 mm Material throughput up to 80 mm Oil application from above and below Adjustable throughput speed approx. 6 - 35 m/min Motor 0.37 kW, 400 volts, 50 Hz. CE certified Machine table working height 900 mm, powder-coated Additional protective hood with adjustable throughput thickness, with Plexiglas insert Non-driven roller conveyor 1300 mm Working height 900 mm Height adjustable Dksln Nmowbk R Aj Nhsl Storage location: Supplier

Condition: used, Year of construction: 2008, machine/vehicle number: 2008.01.161, grinding width: 1,350 mm, HEESEMANN MFA6 Wide Belt Sander Sanding width: 1350 mm Workpiece height: 3 – 150 mm Working height 880 mm Feed speed 3-15 m/min Aggregate: Dslnswh Scys Nm Nhokl 1 x 15 kW transverse sanding aggregates; (belt 4350x140) 2 x 15 kW longitudinal sanding aggregate with 15 kW pressure lamellar belt; (belt 1900x1380) 1 x 2.2 kW brush-roller unit; 1 x 0.75 kW brush-roller unit; Total connected power: 63 kW Dust extraction total air demand: 195 m³/min Compressed air total air demand: 188 m³/h Dismantling on the Buyer's side

Condition: good (used), High-performance grinding spindle, internal grinding machine, internal grinding device, internal grinding spindle Doln Nmevzxlis Nhekl -Handover: in current condition as viewed -Condition: without grinding spindle -Grinding spindle for: Lathe -electric: operated -Motor: VEM 0.75 kW -Bracket: Ø 80 mm -Dimensions: see photos -Total dimensions: 600/370/H350 mm -Weight: 60 kg

Condition: new, Year of construction: 2022, Belt width: 150mm Belt length: 2600mm Oscillation: yes Sanding rollers for curves: 1 Dkjljiuld Djn Nm Nhel Sanding unit can be swivelled: yes Table size: 750mm x 290mm Suction connection: 120mm Motor power: 3kW Machine length: 1700mm Machine width: 700mm weight: 180kg

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, total width: 2,000 mm, total height: 2,070 mm, total length: 1,800 mm, grinding width: 1,350 mm, power: 11 kW (14.96 HP), grinding belt length: 2,150 mm, grinding belt width: 1,370 mm, extraction nozzle diameter: 200 mm, power of feed motor: 800 W, motor voltage: 400 V, Slight signs of wear from demonstration. The LIBRA 45 is characterized by a rich range of standard equipment, a very robust construction (both the base frame and the work units), sanding shoes with a larger contact surface and modern control systems Motorized table height adjustment Digital display for the working height Electronically controlled sanding belt oscillation with reduced compressed air requirement Automatic star-delta start-up Natural rubber feed carpet with negative profile Automatic carpet centering Support table with rollers at the inlet and outlet of the feed carpet Large sanding roller diameter 140 mm Carpet feed via gear motor with two speeds Flexible steel pressure rail in front of the first unit Rubber pressure rollers, in front of and behind each work unit Pneumatic belt tension for each unit with decimal correction option for grain size/belt thickness Equipment: Work table height adjustment with electronic display of the working height Oscillation of the sanding belts with electronic system Rubber-coated grooved pressure roller at the inlet 1° position with Backflow protection (C.E.) Star-delta start of the main motors Grooved calibration steel roller Selector switch for positioning the sanding shoe from the control panel Extraction connection Extraction nozzle diameter 2 x 200 mm Electrical data Power of height adjustment motor 0.25 kW Power of feed motor 0.8 kW Power of drive motor 11 kW Connection voltage 400 V Mains frequency 50 Hz Grinding unit Grinding belt length 2150 mm Grinding belt width 1370 mm Grinding width max. 1350 mm Feed unit Feed speed 4.5 / 9 m/min Djlnjvxu E Ho Nm Nhekl Workpiece Height min. 4 mm Height max. 170 mm

Condition: new, Year of construction: 2022, Belt width: 150mm Strap length: 2260mm Dkjln Njha Nz Rsm Nhjl Veneer sanding device: no Oscillation: yes Roller diameter: 115 mm Sanding unit swivels: yes / 90° - 0° Work table: 750 x 250 mm Additional table: 300 x 245 mm Belt speed: 16.3 m/sec. Suction connection: 100mm Motor power: 3 kW / 400V Machine length: 1270mm Machine width: 600mm weight: 120kg

Condition: new, Year of construction: 2022, Strip width: 150mm Belt length: 2740mm veneer sanding device: no oscillation: yes roller diameter: 115 mm Grinding unit swivels: yes / 90° - 0° worktable: 900 x 305 mm additional table: 290 x 260 mm Dksln Nm Nshq A H Dshol Belt speed : 16 m/sec. m/sec. Suction connection : 100mm Motor power : 3 kW / 400V Machine length: 1540 mm Machine width: 750 mm Weight: 220 kg