Condition: used, Paint Line with (2) Delta Air Sweep Systems with Extraction, Wash /Degrease /Phosphate Treatment, Dry Off, Primer Booth (Delta Air Sweep), Curing Oven (GAS), Top Coat Spray (Delta Air Sweep) Final Curing Oven (GAS), Year 2013 Tjdpfe Afpiysx Abued

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 31,000 mm, total height: 4,000 mm, total width: 8,000 mm, workpiece weight (max.): 100 kg, input voltage: 230 V, workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, fuel: electricity, sheet thickness steel (max.): 900 mm, We offer this ready-to-use GEMA powder equipment with single stage pre-treat systems and 2 x ovens, manufactured in 2012. Manufacturer: GEMA Construction year: 2012 Equipment type: Powder coating equipment Full working Compact Powder Coating Plant consists of below 1 x SINGLE STAGE PRE-TREAT PLANT 1 X DRY OFF OVEN Tjdpfx As Agc D Sobusd 1 X GEMA QUICK COLOUR CHANGE POWDER BOOTH WITH RECIPROCATORS, CYCLONE AND AFTER FILTER 1 X OVERHEAD CONVEYOR SYSTEM 1 X TUNNEL OVEN If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: like new (used), Year of construction: 2021, operating hours: 1,150 h, functionality: fully functional, machine/vehicle number: nvt, total length: 22,130 mm, total height: 3,620 mm, workpiece height (max.): 750 mm, workpiece length (max.): 600 mm, sheet thickness steel (max.): 8 mm, Are you looking for a direct expansion of your production capacity, or do you want to elevate your finishing quality to the highest possible level? Due to unforeseen circumstances, we are offering our powder coating system for sale. The line has been operational since December 2021 and is in absolute new condition, both visually and technically. No long lead times or start-up problems: the entire line is currently fully assembled and can be inspected in working order at our location in Hoogeveen. You will see exactly what you are buying! Design and production principles: The system is specifically designed for high-quality and continuous processing of smaller series products: - Target machine: Optimally configured for smaller parts and series products - Option for Glasbeek to disassemble and reassemble the machine. Costs for this can be requested. Included in this complete line: - Spray tunnel (3-stage) with emergency floor (Glasbeek) - Demi-water system - Air knife - Combined continuous drying/curing oven (Glasbeek) - Continuous powder booth/extraction wall (Glasbeek) - Spray equipment (GEMA) - Powered chain conveyor with tensioner and automatic lubrication station (Railtechniek) - Control cabinet The prices mentioned are excluding VAT. All documents are available and can be requested. The line has been maintained by Glasbeek. Tedpfx As Af Tv Eobued

Condition: good (used), Year of construction: 2014, machine/vehicle number: 59 526 05 221 0010, functionality: fully functional, operating hours: 1,000 h, power: 20 kW (27.19 HP), input voltage: 380 V, input current: 33 A, type of input current: three-phase, temperature: 650 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,800 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 350 kg, number of chambers: 1, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, Hardening furnace Vötsch VAW 60/100, in good condition. For sale due to business closure. Very reliable furnace; the temperature difference in the combustion chamber at 500°C is +/- 15°C. The furnace was operated at a maximum temperature of 500°C during production. The door seal is in good condition. Tsdpfx Asz Rnwhjbued The new price was EUR 38,000.

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: MF01/2012, METRON AIR heated spray booth / extraction booth for sale For sale is a METRON AIR spray booth/extraction booth manufactured in 2012, with a heated drying function. It can be used for extracting and filtering paint mist during painting operations, as well as for drying and curing the workpiece. Key technical specifications: Dimensions: 3.6 × 4.0 × 2.8 m Inflow air volume: 14,000 m³/h Extraction air volume: 14,000 m³/h Todpfx Abs Ab Huxeuod Power supply: 400 V, 32 A, 50 Hz Fan motor power: 4.0 kW Riello Gulliver BS 3 burner head, with a maximum burner and heat exchanger output of 120 kW Painting phase: approximately 25 °C; drying phase: 60 °C Dry dust separator, EU3 filter system 85–90% air recirculation in drying mode The machine manual and the 2023 fire safety compliance test report for the METRON Air series are available.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, total width: 1,325 mm, total height: 3,250 mm, total length: 3,735 mm, overall weight: 5,000 kg, We offer a table-type shot blasting machine – Škoda TMSO 2.4/5. The machine has 2 rotating tables with a diameter of 1000 mm. It features one turbine with a power input of 7.5 kW. The machine is in excellent condition, fully functional, and can be tested in operation. Todpsz Dfuvefx Abuod

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer a STEM continuous spray coating machine – CH 12x18.5/3W1E/MS/8x1T. Tsdpfoz Dfzcox Abued Year of manufacture: 2019. Chamber dimensions: 1200 x 1850 mm. The equipment has 3 turbines.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total length: 7,000 mm, total height: 3,200 mm, total width: 4,000 mm, type of input current: three-phase, input voltage: 400 V, volume flow: 24,000 m³/h, suction capacity: 24,000 m³/h, extraction nozzle diameter: 500 mm, power: 4 kW (5.44 HP), Equipment: cabin, For sale is a like-new mobile spray booth, EuroSys PT-99999, from Neue Protechnik AG, Neuenhof CH. The system was only in operation for a few months and is in perfect condition. The system is fully equipped and includes the mobile EuroSys spray booth with PVC material, 2 entrance gates of 1500x2800mm each with integrated filter holders, intake air filter M5, LED ceiling lighting, and the paint mist extraction unit PT-999998 with a 4kW motor (400V), 24,000 m3/h capacity, a 3-stage filter system according to LRV guidelines, exhaust pipe D500mm, and a chassis/underframe. The original invoice for CHF 22,900 is available. The system has already been completely disassembled, carefully packed, and is stored ready for pickup. An inspection before pickup is, of course, possible at any time. We are available to answer any questions and arrange viewings: Available via WhatsApp Several videos are available (including the running motor, etc.) Tsdoz Nxk Njpfx Abuod (30 photos, 2 videos) Google Drive

Condition: like new (used), Year of construction: 2008, operating hours: 104 h, functionality: fully functional, machine/vehicle number: 42603/08, pressure: 8 bar, operating pressure: 6 bar, total width: 3,000 mm, total height: 5,200 mm, total length: 6,800 mm, inner dimension width: 1,100 mm, inner dimension length: 6,800 mm, inner dimension height: 500 mm, filter area: 1 m², input current: 95 A, input voltage: 380 V, control cabinet width: 1,200 mm, control cabinet length: 500 mm, control cabinet height: 2,200 mm, air pressure: 8 bar, passage height: 500 mm, space requirement width: 4,000 mm, space requirement length: 9,000 mm, space requirement height: 6,000 mm, power: 50 kW (67.98 HP), conveyor belt width: 1,100 mm, Rösler Shot blasting machine RRB 11/5, we used this machine only like backup. That are the reason why is working time very low and machine are completely correct. Tjdpfxst N Sz Ao Abusd

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Tsdjz I Iv Rjpfx Abued Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location Todpfez Rnu Tsx Abued • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Condition: new, ✅ Professional parts cleaning machine RESY – buy now at a great price! Are you looking for a powerful and robust parts cleaning machine for larger batches? Then our RESY series is just the thing for you! All models are made entirely of stainless steel – including the special pump. This new development offers the highest quality and durability for industry and trade. Available in three sizes: RESY 1250 – Rotating table 1150 mm – AVAILABLE FOR IMMEDIATE DELIVERY RESY 1500 – Rotating table 1350 mm RESY 1650 – Rotating table 1500 mm (Other sizes available upon request!) Features & Benefits: ✔️ Material: Stainless steel – corrosion-resistant & durable ✔️ Rotating table: 1150 / 1350 / 1500 mm, depending on the model ✔️ Spray capacity: 500 l/min ✔️ Spray working pressure: 2x 2 Hp (RESY 1250) or 2x 2.2 Hp (RESY 1500/1650) ✔️ Heating power: 2x 7.5 kW – fast heating ✔️ Temperature control up to 60 °C ✔️ Basket capacity: 300 kg ✔️ Programming of the working time ✔️ Loading trolley included ✔️ Glass window included (for RESY 1500 & 1650) or optional (for RESY 1250) ✔️ Voltage: 380 – 400 V ✔️ Weight without liquid: 400 kg (RESY 1250/1500) or 500 kg (RESY 1650) Perfect for: – Workshops – Industrial companies – Job shops – Maintenance Other systems available from us: ✅ Immersion tank ✅ Paint stripping tank Tjds Agnx Aepfx Abued ✅ Mobile extraction systems ✅ Washing systems ✅ Powder coating oven ✅ Spray booth ✅ Extraction system + make-up air system ✅ Mirroring technology Delivery & Warranty: Our parts washing systems are custom-made – delivery time approx. 7 – 14 working days. Delays may occur in case of high order volume. 1 year manufacturer's warranty included! Contact: Do you have any questions or would you like a customized offer? Our support team is available for you at any time! Request now – we look forward to hearing from you!

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss surfaces. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical data and equipment: • Large-area, filtered supply air ceiling panel, approx. 8,100 × 4,500 mm • Filter ceiling divided into two areas across its width • Large-area floor extraction system, approx. 8,100 × 3,650 mm, with grating • Supply air treatment, approx. 24,500 m³/h • Exhaust air treatment, approx. 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating / hot water system with pumps and fittings • Air ducts and existing piping • Electrical system control / control cabinet • Cabin lighting • Sale includes the system in its current, on-site configuration Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface work up to and including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer must organize the necessary specialist personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical specifications have been compiled based on available documentation, nameplates, and the current condition of the system. Specifications are without guarantee. The condition and scope determined during inspection shall be binding. Selling price: 19,500.00 EUR Tsdpez Ikyrefx Abued Price is net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Condition: used, Year of construction: 1982, functionality: fully functional, machine/vehicle number: 093185, We offer a drum-type shot blasting machine with a steel belt. Steel belt width – 1800 mm Tsdpoz Nqduefx Abued Machine year of manufacture – 1982 Filtration unit capacity – 15,000 m³/hour Filter motor – 30 kW Filter year of manufacture – 2017.

Condition: good (used), Year of construction: 2020, operating pressure: 310 bar, pump capacity: 42 l/min, Graco Premier 42 liters/minute 6.9 GPM Ratio 45:1 310 bar / 4500 psi 2 units for sale Price per unit: €900 Tjdpfey Ul Dkjx Abujd

Condition: new, Year of construction: 2026, heating capacity: 9 kW (12.24 HP), temperature: 210 °C, Forced-air chamber furnace | Various sizes & custom dimensions | Directly from the manufacturer Royal Gold Industries Kft. – Your manufacturer of industrial forced-air chamber furnaces We offer high-performance forced-air chamber furnaces for industrial applications. Thanks to the multi-point hot air circulation system, the heat is distributed evenly throughout the interior. The electronic temperature control and simple operation enable reliable operation for different thermal processes. IMPORTANT: Various sizes available! The furnaces are available in different dimensions. In addition to standard sizes, we also manufacture individual custom dimensions on request, tailored to your space requirements and production needs. Examples of possible internal dimensions (L × W × H): 1200 × 1200 × 1800 mm 2000 × 1200 × 1800 mm 3000 × 1200 × 1800 mm Other dimensions available on request Technical data – example configuration Furnace type: Forced-air chamber furnace with convection air circulation Internal dimensions: 1200 × 1200 × 1800 mm Chamber volume: 2.592 m³ Heating power: 9 kW Tsdpj Afmuyofx Abujd Power supply: 380 V / 16 A Thermal insulation: 150 mm Control: conventional Door arrangement: Doors on one side Heat distribution: Multi-point hot air circulation system The technical data refers to the example configuration. Heating power, power supply and other parameters may vary depending on the furnace size and design. Your advantages Directly from the manufacturer – without intermediaries Different standard sizes and individual custom dimensions Even heat distribution through forced-air technology Electronic temperature control Robust industrial design Adaptation to your workpieces and production requirements Delivery within Europe possible Request an individual offer Do you need a forced-air furnace in a specific size or with special technical requirements? We will be happy to create a suitable offer for you. Contact Royal Gold Industries Kft. with your desired internal dimensions, the required temperature and the intended application. Royal Gold Industries Kft. Manufacturer of industrial furnaces and machinery Directly from the manufacturer – individual solutions for your production. Directly from the manufacturer – individual solutions for your production.

Condition: used, ITW Gema QCS 03 25-310 Complete Automatic Powder Coating Line, Powder coating system, Used machine Manufacturer / System: ITW Gema AG (Switzerland) & Recycolor Kft. Type / Model: GEMA QCS 03 25-310 (Powder coating booth) Year of manufacture: 2008 Serial Number: 5008-03012 (GEMA) / 16/2008 (Recycolor) Condition: Used, good industrial condition Dimensions and capacity: - Current layout footprint: 27 m x 18 m (system components can be reconfigured or modularly installed according to buyer needs) - Maximum workpiece size: 2500 x 800 mm - Conveyor line speed: High-capacity, 2 m/min - Exhaust air volume (booth): 16,000 Nm³/h - Cyclone dust collector extraction capacity: 8000 m³/h - Permissible organic powder concentration: 25 g/Nm³ (certified powder), 10 g/Nm³ (uncertified powder) - Zone 22 Main system components and technical specifications: 1. Surface Pre-treatment Tunnel (Recycolor Kft.): - Continuous multi-zone degreasing, (phosphating), and rinsing system. - Final rinse zone: DI (demineralized) water rinse stage. - Construction: Watertight PP sheet housing with drip zones and partition plates to minimize cross-contamination. - Lower zone tanks equipped with internal filters, circulation pumps, and fitting assemblies. - Dehumidification / Exhaust: Fan extraction with droplet separator. - Control system: Fully automated PLC control. 2. ITW Gema QCS 03 25-310 Powder Coating Booth & Recovery System: - GEMA quick color-change booth with integrated overhead conveyor. - Double-sided automatic powder coating with 4+4 (total 8) spray guns with 2500 mm vertical stroke. - Pre-touch manual spraying area at the inlet for complex geometries. - Mono-cyclone powder recovery system and absolute filter with built-in exhaust fan. - Bottom cone with swing-out sieve unit for automatic or manual powder recycling. Tsdpfx Aj Af I Hdsbusd 3. Water Drying and Powder Curing Oven (Recycolor Kft.): - Fuel type: Natural gas - Main gas burner: Weishaupt WG30N/1-C/ZM-LN 3/4" W-MF (Max. output: 320 kW, supply pressure: 100 mbar) - Gas-infrared burners: INFRATEC / Honeywell CVI-r1 - VK4115V (24 units x 10 kW/unit = 240 kW total power, max. 50 mbar) - Air recirculation: 2x MA-62/1440 fans (2 x 15,000 m³/h flow rate, 2 x 7.5 kW motor power) - Design: Thermal-bridge-free sandwich panels with internal framework and "A-shape" thermal lock entry/exit to retain internal hot air. - Operating temperature range: Adjustable between 60 – 220 °C.

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Work area approx. 2.10 x 2.40 x 3.50 m Tsdpfxjz D Ifqs Abued Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Condition: excellent (used), Year of construction: 2022, Matt HV 1216 suspended shot blasting machine. Two 11kW turbines. In very good condition, lightly used. Tjdpfxsztkzij Abued

Condition: used, Year of construction: 2009, Year of manufacture: 2009 Curing Furnace Model: Electric Manufacturer: Reinhardt Type: E2 Year of construction: 2009 Working temperature: 50-300 degrees Working space: 0.21m3 Opening size: 650x650mm Voltage: 3x400V Motor: 0.55kW. - Year: 2009 - Power [kW]: 0.6 - Chamber length [mm]: 650 - Chamber width [mm]: 650 Todpozry Ipefx Abujd - Max. temperature [°C]: 300 Financial information VAT: The price shown is exclusive of VAT VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Lukas van Rossum

Condition: used, Year of construction: 2007, operating hours: 20,000 h, functionality: fully functional, total height: 1,800 mm, total length: 1,000 mm, total width: 1,200 mm, feed rate X-axis: 12 m/min, feed rate Y-axis: 12 m/min, feed rate Z-axis: 6 m/min, feed length X-axis: 600 mm, feed length Y-axis: 600 mm, feed length Z-axis: 50 mm, We offer this used DIMA (Selective Protective Coating Machine) Hybrid Coating System HC-200, manufactured in 2007. Sale is ex works. Operating hours: 20,000 h, machine is operational. If you have any questions or require further information, please send us a message or call us. On-site inspection is welcome. Technical data: Type: HC-200 Selective protective coating machine Dimensions (L x W x H): 1000 x 1200 x 1800 mm (+500 mm for signal light) Tsdpjz Ix R Ejfx Abued Stepper motor in combination with encoder, with ball screw and linear guide and spline axis XY speed 0.2 m/s Z-axis speed 0.1 m/s XYZ resolution 0.00625 mm Resolution of the rotary axis 0.036° Rotation 370 degrees Working area (based on a valve on the Z-slide) 600 x 600 mm – Z-movement 50 mm Inline chain conveyor 500 x 600 mm – Z-movement 50 mm Inline belt conveyor with clamping 525 x 600 mm – Z-movement 50 mm Min./Max. conveyor width (chain): 35 mm / 500 mm (manually adjustable) 35 mm / 500 mm (automatically adjustable) Min./Max. conveyor width (belt): 35 mm / 500 mm

Condition: excellent (used), We offer a table-type shot blasting machine – STEM 14x6/2S/2WX1M with a table diameter of 1400 mm. The machine is in very good condition and ready for immediate use. The shot blasting machine has two rotary tables and two turbines, each with a power consumption of 5.5 kW. The designed shot blasting unit is manufactured for semi-automatic shot blasting of the external surface of parts placed on a rotary table. The machine is equipped with two rotary tables. Rotary table diameter: 1400 mm Maximum product height: 600 mm Type: 14x6/2S/2WX1M Year of manufacture: 2009 Total operating hours: 5275 Commissioning date: March 31, 2009 Machine weight: 5000 kg Machine length: 3540 mm Machine height: 5540 mm Machine width: 6600 mm Total power consumption: 20 kW Operating range Shot blasting wheel, number and type: 2 WX1M Outer diameter of shot blasting wheel: 330 mm Shot blasting wheel speed: 2900 rpm Amount of abrasive material discharged per turbine: 80-90 kg/min Amount of abrasive material for initial filling: 500 kg Todpfx Abo Afak Ueuod Rotary table diameter: 1400 mm Rotary table speed: 2 rpm Spindle diameter at the front bearing: 105 mm Maximum torque on the spindle: 2500 Nm Distance from the spindle axis to the clamping surface of the table: 60-560 mm Maximum workpiece weight: 500 kg per rotary table.

Condition: used, Year of construction: 2019, operating hours: 100 h, heating capacity: 12 kW (16.32 HP), total width: 700 mm, total length: 1,300 mm, total height: 600 mm, overall weight: 500 kg, Cleaning System Manufacturer: MFP - FTW Type: Conditioning tank - Size 2 Year of manufacture: 2019 Technical data: - Heating capacity: 12 kW - Temperature range: 30 - 90 °C - Dimensions (length/width/height): 1,300 x 700 x 600 mm - Max. load weight (mesh box): 800 kg - Operating hours: approx. 100 h - Overall dimensions: L x W x H 1.5 x 1.5 x 1.5 m - Weight: 500 kg In our assessment, the machine is in good used condition and can be inspected under power by appointment. Tsdezbvhfjpfx Abued Accessories, tools, and clamping devices shown are included in the scope of delivery only if specified in the additional information. Subject to technical changes, errors, and prior sale.

Condition: excellent (used), Year of construction: 2007, functionality: fully functional, For sale is a complete, fully functional automatic painting line, based on the Superfici Compact Spray 1300 automatic spraying system, along with a CEFLA drying system. The line is complete, currently assembled, and has been used in regular production. It is being sold as a complete technological line. The set includes: - Superfici Compact Spray 1300 painting machine - CEFLA drying tunnel – total length approx. 13 m - CEFLA control cabinet Todpfx Abez Ix Azeued - CEFLA conveyor - GRACO Merkur X48 pump - GRACO D08B pump Condition: used, complete, and fully functional. The machine can be inspected on-site in Poland, in the Silesian Voivodeship (near Bielsko-Biała). Upon request, a video showing the line in operation and additional technical information are available. Available immediately. The terms for dismantling, loading, and transport can be agreed upon individually. Price: 49,900 EUR net.

Condition: excellent (used), Year of construction: 2025, operating hours: 6 h, functionality: fully functional, Equipment: compressor, We are offering this very well-maintained Joke Microjet2 fine jet blasting machine, manufactured in 2025, including a maintenance-free compressor, also manufactured in 2025, and the dust collector for the blasting system. The blasting machine and compressor have a combined operating time of approximately 5-6 hours. The oil-free compressor is from Cleanair, and the dust collector is also from Joke. Tsdpfx Aez I Dyxjbued If you have any questions or require further information, please do not hesitate to send us a message or call us.