Condition: used, Paint Line with (2) Delta Air Sweep Systems with Extraction, Wash /Degrease /Phosphate Treatment, Dry Off, Primer Booth (Delta Air Sweep), Curing Oven (GAS), Top Coat Spray (Delta Air Sweep) Final Curing Oven (GAS), Year 2013 Csde Afpiyspfx Adcehd

Condition: ready for operation (used), Year of construction: 2012, functionality: fully functional, total length: 31,000 mm, total height: 4,000 mm, total width: 8,000 mm, workpiece weight (max.): 100 kg, input voltage: 230 V, workpiece height (max.): 1,500 mm, workpiece length (max.): 3,000 mm, fuel: electricity, sheet thickness steel (max.): 900 mm, We offer this ready-to-use GEMA powder equipment with single stage pre-treat systems and 2 x ovens, manufactured in 2012. Manufacturer: GEMA Construction year: 2012 Equipment type: Powder coating equipment Full working Compact Powder Coating Plant consists of below 1 x SINGLE STAGE PRE-TREAT PLANT 1 X DRY OFF OVEN 1 X GEMA QUICK COLOUR CHANGE POWDER BOOTH WITH RECIPROCATORS, CYCLONE AND AFTER FILTER 1 X OVERHEAD CONVEYOR SYSTEM Cjdpfx Adj Agc D Socjhd 1 X TUNNEL OVEN If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: reconditioned (used), Year of construction: 2025, functionality: fully functional, total height: 4,000 mm, total length: 40,000 mm, total width: 6,000 mm, Equipment: documentation/manual, Automated nickel–chrome electroplating line for sale in Türkiye. The line was completely refurbished in 2025 and was operational before dismantling. All equipment is now dismantled and ready for loading. Cedjz Ei Ngjpfx Adcjhd The line has a reported coating surface area of 400–450 dm², a maximum rack load of 1,000 kg and a production capacity of 8,000 dm² per hour. Its installed footprint is 40 × 6 m (240 m²), with reported electricity consumption of 80 kWh per operating hour. The sale includes process tanks, filters, rectifiers, a hot-water boiler, a purified-water system and dosing pumps. The equipment list includes six 1,300 A nickel rectifiers, two 4,500 A chrome rectifiers and one 3,000 A rectifier for electrolytic degreasing. The buyer is responsible for transport and commissioning. A detailed equipment list and presentation are available upon request.

Condition: used, Year of construction: 2019, functionality: fully functional, power: 15 kW (20.39 HP), input voltage: 400 V, input current: 22 A, input frequency: 50 Hz, type of input current: three-phase, temperature: 1,280 °C, inner dimension length: 350 mm, inner dimension width: 350 mm, inner dimension height: 250 mm, Equipment: documentation/manual, Electrically heated chamber furnace, Nabertherm Type: N 31/H Maximum temperature: 1280 °C Chsdpfx Ao Ah Eb Eedced Internal dimensions: approx. 350 x 350 x 250 mm Power: 15 kW Controller: P470

Condition: used, Year of construction: 2008, functionality: fully functional, compressed air connection: 5 bar, inner dimension height: 3,000 mm, inner dimension length: 17,700 mm, inner dimension width: 5,260 mm, Equipment: documentation/manual, Due to the restructuring of our workshop, we are offering our professional GARMAT spray booth installation for sale. The installation is currently in use and can be inspected while operational. Dismantling is possible from mid-December. This is a complete installation consisting of a spray booth, drying chamber, paint preparation area, burner, and ventilation and extraction systems. Codo Agw A Tjpfx Adcohd Dimensions: Laboratory / preparation area: 2.26 m wide x 5.26 m long x 3.03 m high Spray area: 6.00 m wide x 5.26 m long x 3.03 m high Floor extraction with a pit 5.00 m wide x 3.16 m long Wall extraction across the full width of 5.00 m and 2.00 m high Ceiling extraction available Drying chamber: 9.40 m long x 5.26 m wide x 3.03 m high Can be closed with two sliding doors Usable sliding door opening: 2.40 m Equipped with heating, extraction, and burner Technical data: Brand: GARMAT Installation type: MASTER 15.5/5.26/3 Burner capacity: 300 kW Frequency controller included Includes control panel GMD 105 Separate paint preparation area with its own extraction system Technical specifications and detailed photos are available and are part of the sales information. Important: The installation is currently operational. Available for dismantling from mid-December. Dismantling, loading, and transport are the full responsibility of the buyer. Sale is in the condition the installation is currently in. Price: to be agreed / offers invited.

Condition: excellent (used), Year of construction: 2018, functionality: fully functional, We offer a STEM continuous spray coating machine – CH 12x18.5/3W1E/MS/8x1T. Year of manufacture: 2019. Chamber dimensions: 1200 x 1850 mm. Csdjz Dfzcjpfx Adcohd The equipment has 3 turbines.

Condition: good (used), Year of construction: 2014, machine/vehicle number: 59 526 05 221 0010, functionality: fully functional, operating hours: 1,000 h, power: 20 kW (27.19 HP), input voltage: 380 V, input current: 33 A, type of input current: three-phase, temperature: 650 °C, inner dimension length: 1,000 mm, inner dimension width: 600 mm, inner dimension height: 600 mm, total length: 1,800 mm, total width: 1,600 mm, total height: 1,900 mm, overall weight: 350 kg, number of chambers: 1, control type: manual, actuation type: electric, fuel type: electric, Equipment: CE marking, Hardening furnace Vötsch VAW 60/100, in good condition. For sale due to business closure. Very reliable furnace; the temperature difference in the combustion chamber at 500°C is +/- 15°C. The furnace was operated at a maximum temperature of 500°C during production. The door seal is in good condition. Chodpez Rnwhefx Adcsd The new price was EUR 38,000.

Condition: excellent (used), Year of construction: 2015, functionality: fully functional, input voltage: 400 V, workpiece height (max.): 2,100 mm, workpiece length (max.): 2,000 mm, Ideal-Line Powder Coating Line | Gema Automatic Booth | 17 Guns | Chemical Pretreatment | 250 m Overhead Conveyor Complete Powder Coating Line 3-stage chemical pretreatment system | Dry-off oven | Automatic powder coating booth with recovery system | Curing oven | Overhead conveyor For sale: a complete used powder coating line in good working condition. The line is technically operational and designed for continuous coating of steel and aluminum components. The line consists of: • Overhead conveyor system • Surface pretreatment section • Dry-off oven after washing • Automatic powder coating booth • Powder recovery system with cyclone and filtration unit Chodpfxoz Rnu To Adced • Curing oven • Loading and unloading stations • Control cabinet and automation system _____ Technical Specifications • Manufacturer: Ideal-Line, booth and application system by Gema • Year of manufacture: 2012 / 2015 • Maximum part dimensions (L × W × H): 2000 × 750 × 2100 mm • Powder application system: Gema automatic system with 17 powder guns • Pretreatment: 3-stage chemical pretreatment washer • Oven heating source: Direct-fired natural gas • Conveyor length: Approx. 250 m • Power supply: 400 V _____ Technical Condition The line has been regularly maintained and operated in continuous production service until 30 September 2026. _____ Additional Information • Technical documentation available • Sale due to plant closure • Inspection available by appointment • All de-installation and removal costs buyer is responsible Location • Koszalin, Poland Price • Cena: 369 000 EUR excl tax

Year of construction: 2024, condition: used, functionality: fully functional, Exhaust hood M4000 Technical specifications for each exhaust hood: Working width 4,000 mm Working height 3,000 mm Overall width 4,050 mm Overall height 3,050 mm Overall depth 750 mm Airflow rate 15,000 m³/h Fan 2 units, Atex Motor 2 x 3.6 kW, with Ex protection Csdps Ahmwyjfx Adcohd Scope of supply for the exhaust hood: 1 Exhaust hood housing, consisting of modules, entirely made of galvanized sheet metal 1 Set of labyrinthine pre-filters made of paper 1 Set of filter mounting frames with filter material made of glass fiber 2 Radial fans with spark protection, Ex protection

Condition: new, Paint booth / extraction wall for paint mist – various sizes | Royal Gold Industries Kft Professional paint mist extraction directly from the manufacturer | Custom dimensions | CE | 24 months warranty Available sizes and models Our paint booths and extraction walls are available in various dimensions. Choose the size that suits your workshop, paint shop or industrial production. 1800 × 1000 mm 1800 × 1500 mm 1800 × 2000 mm 2000 × 2000 mm 2300 × 1000 mm Chodpfxe Agnyve Adcjd 2300 × 1500 mm 2300 × 2000 mm 2500 × 2000 mm 2800 × 2000 mm 3000 × 2000 mm Do you require different dimensions? As a manufacturer, we also produce individual custom sizes on request, tailored to your space requirements and specific application. High-performance paint mist extraction for professional painting With the paint booth or extraction wall from Royal Gold Industries Kft, you will receive a powerful and practical solution for professional painting. The paint mist extraction system captures the paint mist directly in the work area and supports a clean working environment and efficient workflows. Ideal for paint shops, metalworking companies, workshops and industrial manufacturing companies. Strong performance and precise control Equipped with a powerful 1.5 kW industrial motor, the system offers reliable extraction performance. An optional frequency converter can be integrated for stepless adjustment of the motor output. With a specified air flow rate of up to 11,150 m³/h at 860 Pa, this model is suitable for demanding extraction tasks in professional applications. Technical data of the 3000 × 2000 mm model Work area: 3000 × 2000 mm Motor output: 1.5 kW Electrical connection: 380 V / 16 A Air flow rate: up to 11,150 m³/h at 860 Pa Control: optional stepless adjustment Weight: approx. 185 kg Exhaust connection: right side, Ø 400 mm Marking: CE Warranty: 24 months Technical specifications refer to the 3000 × 2000 mm model. Depending on the size and configuration, the values may vary. Your advantages at a glance Effective capture of paint mist directly at the source Support for clean and efficient painting processes Various work areas for different requirements Optionally adjustable extraction performance Space-saving integration into existing work areas Individual custom sizes according to customer requirements Direct purchase from the manufacturer without intermediaries Personal advice and support in the selection process Accessories and individual extensions Depending on the model and requirements, various extensions are possible: Multi-stage filter systems LED lighting Frequency converter for power control Individual special equipment Tailor-made solutions for your company Directly from the manufacturer: Royal Gold Industries Kft We are a manufacturer of industrial machines and extraction systems and offer solutions for commercial and industrial applications. Why Royal Gold Industries? Direct contact person at the manufacturer Manufacturing according to individual requirements Various standard sizes and custom dimensions Personal advice before purchase Delivery within Europe on request

Condition: used, Year of construction: 2012, functionality: fully functional, machine/vehicle number: MF01/2012, METRON AIR heated spray booth / extraction booth for sale For sale is a METRON AIR spray booth/extraction booth manufactured in 2012, with a heated drying function. It can be used for extracting and filtering paint mist during painting operations, as well as for drying and curing the workpiece. Key technical specifications: Dimensions: 3.6 × 4.0 × 2.8 m Inflow air volume: 14,000 m³/h Extraction air volume: 14,000 m³/h Power supply: 400 V, 32 A, 50 Hz Fan motor power: 4.0 kW Riello Gulliver BS 3 burner head, with a maximum burner and heat exchanger output of 120 kW Painting phase: approximately 25 °C; drying phase: 60 °C Chedpfx Ads Ab Huxeced Dry dust separator, EU3 filter system 85–90% air recirculation in drying mode The machine manual and the 2023 fire safety compliance test report for the METRON Air series are available.

Condition: used, Radial fan REITZ, Type: MAE Manufacturer's No. 601475, Year of manufacture 2017 Volume flow rate 4260 m³/h = 71 m³/min. Pressure p 1.2 kg/m³ Air inlet Ø 250 mm (flange diameter in the base plate) Air outlet 245 x 195 mm Motor speed 2915 rpm Motor power 7.5 kW Chodpfxe Ah Ig Ds Adcod Mains connection 400 Volts 50 Hz - Fan impeller with 9 fan blades - Directly flanged drive motor - Flange dimensions for air outlet 310 x 260 mm - Sturdy metal housing made of 5 and 6 mm steel Space requirement L x W x H 1390 x 1030 x 600 mm Weight of radial fan 200 kg Very good condition, only test run completed.

Condition: like new (used), Year of construction: 2020, functionality: fully functional, total length: 7,000 mm, total height: 3,200 mm, total width: 4,000 mm, type of input current: three-phase, input voltage: 400 V, volume flow: 24,000 m³/h, suction capacity: 24,000 m³/h, extraction nozzle diameter: 500 mm, power: 4 kW (5.44 HP), Equipment: cabin, For sale is a like-new mobile spray booth, EuroSys PT-99999, from Neue Protechnik AG, Neuenhof CH. The system was only in operation for a few months and is in perfect condition. The system is fully equipped and includes the mobile EuroSys spray booth with PVC material, 2 entrance gates of 1500x2800mm each with integrated filter holders, intake air filter M5, LED ceiling lighting, and the paint mist extraction unit PT-999998 with a 4kW motor (400V), 24,000 m3/h capacity, a 3-stage filter system according to LRV guidelines, exhaust pipe D500mm, and a chassis/underframe. The original invoice for CHF 22,900 is available. The system has already been completely disassembled, carefully packed, and is stored ready for pickup. An inspection before pickup is, of course, possible at any time. We are available to answer any questions and arrange viewings: Available via WhatsApp Codpfx Adoz Nxk Nocohd Several videos are available (including the running motor, etc.) (30 photos, 2 videos) Google Drive

Condition: ready for operation (used), Year of construction: 2021, operating hours: 1,000 h, functionality: fully functional, machine/vehicle number: 9419257, total height: 2,500 mm, total length: 4,500 mm, total width: 2,200 mm, volume flow: 5,000 m³/h, type of input current: AC, overall weight: 600 kg, inner dimension height: 2,400 mm, inner dimension length: 3,800 mm, suction capacity: 4,500 m³/h, inner dimension width: 2,100 mm, input voltage: 400 V, space requirement height: 2,600 mm, space requirement length: 5,000 mm, Equipment: cabin, lighting, Selling a modular Straumann painting booth with few operating hours. Straumann painting booth (year of manufacture 2021) – in good condition Selling a modular Straumann painting booth with few operating hours. Equipment & Details: Dimensions: Filter area 1.50 × 1.50 m, with extension and booth Work area approx. 2.10 x 2.40 x 3.50 m Technology: Extraction wall, fan with frequency converter, lighting Filtration: 3-stage filter system and 1+1 double door with filter for the afterflow air Construction: SVZ sheet metal panels, screwed together, smooth interior, with 1+1 double door Codpfx Adez D Ifqocohd Condition: Good, well-maintained, easily disassembled, as shown in the pictures. Design and details as shown in the pictures. Disassembly by the buyer; exhaust pipes can be taken over. Please contact me if you have any questions or would like to arrange a viewing. => Disassembly and removal by the buyer => Free of charge, including painting equipment / pressure tank with spray gun, as shown in the pictures => All information without guarantee. Subject to prior sale. Used system: Sale excluding any warranty or guarantee.

Condition: excellent (used), Year of construction: 1995, functionality: fully functional, total width: 1,325 mm, total height: 3,250 mm, total length: 3,735 mm, overall weight: 5,000 kg, We offer a table-type shot blasting machine – Škoda TMSO 2.4/5. The machine has 2 rotating tables with a diameter of 1000 mm. Cjdpfsz Dfuvox Adcjhd It features one turbine with a power input of 7.5 kW. The machine is in excellent condition, fully functional, and can be tested in operation.

Condition: excellent (used), Year of construction: 2025, operating hours: 6 h, functionality: fully functional, Equipment: compressor, We are offering this very well-maintained Joke Microjet2 fine jet blasting machine, manufactured in 2025, including a maintenance-free compressor, also manufactured in 2025, and the dust collector for the blasting system. The blasting machine and compressor have a combined operating time of approximately 5-6 hours. The oil-free compressor is from Cleanair, and the dust collector is also from Joke. If you have any questions or require further information, please do not hesitate to send us a message or call us. Cjdpfx Adoz I Dyxscehd

Condition: like new (used), Year of construction: 2008, operating hours: 104 h, functionality: fully functional, machine/vehicle number: 42603/08, pressure: 8 bar, operating pressure: 6 bar, total width: 3,000 mm, total height: 5,200 mm, total length: 6,800 mm, inner dimension width: 1,100 mm, inner dimension length: 6,800 mm, inner dimension height: 500 mm, filter area: 1 m², input current: 95 A, input voltage: 380 V, control cabinet width: 1,200 mm, control cabinet length: 500 mm, control cabinet height: 2,200 mm, air pressure: 8 bar, passage height: 500 mm, space requirement width: 4,000 mm, space requirement length: 9,000 mm, space requirement height: 6,000 mm, power: 50 kW (67.98 HP), conveyor belt width: 1,100 mm, Rösler Shot blasting machine RRB 11/5, we used this machine only like backup. That are the reason why is working time very low and machine are completely correct. Cedpfx Ajt N Sz Aodcohd

Year of construction: 1998, condition: used, functionality: fully functional, Description: For sale is a large-format, professional BERKMANN surface spraying and painting system. The system was in productive use until recently and was used for high-quality painting work, including demanding high-gloss surfaces. It is currently still fully assembled and installed. This allows interested parties to inspect the existing scope of the system and the installation situation before dismantling and to document it for a later reconstruction. Technical data and equipment: • Large-area, filtered supply air ceiling panel, approx. 8,100 × 4,500 mm • Filter ceiling divided into two areas across its width • Large-area floor extraction system, approx. 8,100 × 3,650 mm, with grating • Supply air treatment, approx. 24,500 m³/h • Exhaust air treatment, approx. 24,000 m³/h • Supply and exhaust air fans / air treatment • Existing heating / hot water system with pumps and fittings • Air ducts and existing piping • Electrical system control / control cabinet • Cabin lighting • Sale includes the system in its current, on-site configuration Chodpfx Adez Ikyroced Condition and use: Used, condition appropriate for its age. The system was in regular production use until recently. Previous use included high-quality surface work up to and including high-gloss coatings. An inspection of the still-assembled system is highly recommended. Sales and dismantling conditions: Sale is effective immediately. The system is permanently installed. Dismantling, removal, loading, and transport are the complete responsibility of the buyer and will be carried out at the buyer's expense. The buyer must organize the necessary specialist personnel as well as lifting, dismantling, and transport equipment. The complete dismantling and removal must be completed no later than July 31, 2027. Note: Technical specifications have been compiled based on available documentation, nameplates, and the current condition of the system. Specifications are without guarantee. The condition and scope determined during inspection shall be binding. Selling price: 19,500.00 EUR Price is net, plus any applicable statutory taxes and duties. Export, customs clearance, and import duties are the responsibility of the buyer.

Year of construction: 1996, condition: ready for operation (used), travel distance X-axis: 450 mm, number of axes: 3, This 3-axis OKAMOTO Grind-X ACC-450 DX was manufactured in 1996. It features a grinding range of approximately 450 x 150 mm and a maximum grinding height of 300 mm. The machine includes a hydraulic table drive and an electromagnetic clamping plate for enhanced precision. If you are looking to get high-quality surface grinding capabilities, consider the OKAMOTO Grind-X ACC-450 DX machine we have for sale. Contact us for further details. - Table Dimensions: approx. 450 x 150 mm with T-slots - Max. Table Load Capacity: approx. 120 kg - Max. Grinding Height: approx. 300 mm (table surface to spindle center) - Machine Weight: approx. 1,500 kg - Drive Mechanism: Hydraulic table longitudinal drive - Operation / Controls: Compact control console with axis jog, cycle, and downfeed functions - Machining Capability: Surface / precision grinding (wet grinding capable) - Included Fixtures: Electromagnetic clamping plate on table, grinding wheel flange, wet grinding device with filter paper band unit - Excluded Items: Grinding wheel (delivered without wheel) - Conformity: CE marked Chjdps Ah Sggjfx Adced

Condition: used, Year of construction: 2016, functionality: fully functional, type of input current: AC, overall weight: 5,180 kg, workpiece weight (max.): 1,800 kg, input current: 46 A, input voltage: 400 V, C.M. Wheel Blast Machine T18 H850 (Year of Manufacture 2016) Product Description The C.M. Surface Treatment T18 H850 is a high-performance wheel blast machine for the economical surface treatment of workpieces. The machine is suitable for descaling, decoring, cleaning, and surface preparation prior to painting or coating. The rotating table system allows a wide variety of workpieces to be blasted evenly. The robust design and powerful turbine enable high processing quality while simultaneously ensuring efficient abrasive consumption. The system features an integrated abrasive processing system with separator, cyclone extraction, and filter system. This ensures that the abrasive is continuously cleaned and reused. Electrical Data Feature | Value Mains Voltage | 400 V Phases | 3 Frequency | 50 Hz Maximum Power | 27.78 kW Installed Total Power | 24.82 kW Operating Current | 45.46 A Working Area Feature | Value Max. Workpiece Diameter | 1,800 mm Max. Workpiece Height | 850 mm Max. Workpiece Weight | 1,800 kg Csdpfxoz I Iv Rs Adcshd Wheel Feature | Value Power | 7.5 kW Wheel Diameter | 334 mm Number of Blades | 6 Peripheral Speed | 30–70 m/s Abrasive Feature | Value Usable Grain Size | 0.1–2.0 mm Maximum Hardness | 62 HRC Initial Filling | 1,500 kg Average Consumption | approx. 500 g/kWh Filter System Feature | Value Suction Capacity | 60–150 m³/min Compressed Air Consumption | 7.2 Nm³/h Filter Area | 75 m² Filter Weight | 1,100 kg Machine Weight Feature | Value Machine Weight | 5,180 kg Unladen Weight (Base Machine) | 4,080 kg Noise Level Feature | Value Sound Pressure Level (Leq) | 83 dB(A) System Components The system consists of: Cabin with rotating table Wheel Sieve Bucket elevator Separator Extraction system with cyclone Filter system Control panel / electrical system Application Areas Descaling Decoring Cleaning of steel components Surface preparation Removal of scale Preparation for painting or powder coating Shot blasting Special Features Rotating table blast machine for large workpieces Closed abrasive system Automatic abrasive processing Integrated dust extraction with cartridge filter Robust industrial design Suitable for workpieces up to 1,800 kg

Condition: good (used), functionality: fully functional, Complete Industrial Powder Coating Line for Sale We offer a complete industrial powder coating line in good working condition. The installation has been professionally maintained and is suitable for coating a wide range of steel and metal products. Equipment includes: Pretreatment system Drying oven Powder coating booth Powder spray equipment Curing oven Conveyor system Electrical control system The complete line is available for immediate sale and can be inspected by appointment. Condition: Well maintained Fully operational before dismantling Suitable for industrial production GEMA OptiStar CG07 Powder Coating Gun Chodezqur Hspfx Adcjd

Condition: used, Year of construction: 2012, functionality: fully functional, For sale is a complete, fully functional, and automated powder coating line for metal parts, complete with an automated process transport system. This is a ready-made solution for manufacturers of shelving, steel structures, warehouse equipment, and other metal components requiring high-quality paint coatings. The entire system is an integrated process that includes the transport of raw parts, surface preparation, powder coating, curing, and inter-process transport. The price includes: Chedpfx Adez Azx Rocsd 1. Dismantling and reassembly of the line at a new location, including accommodation and meals for the technicians. 2. New insulation for the joints of the wall and roof panels, the furnace, and the floor. New bolts for the joints. 3. Sealants for the PP tunnel, connection of sections with tubs, and sections with sections.

Condition: used, Powder coating booth with multi-cyclone and after-filter For sale is a professional, complete industrial system for powder coating: A Gema Volstatic powder coating booth, type MRS (multi-cyclone recovery system with after-filter). This system represents the highest Swiss quality, extreme robustness, and maximum efficiency in powder recovery. Thanks to its generous dimensions, it offers plenty of space for long and bulky workpieces. It is ideal for industrial companies, powder coaters, or workshops looking for a powerful and reliable system. Technical data • Manufacturer: Gema Volstatic • Type: MRS (multi-cyclone and after-filter system) • Electrical connection: 3 x 380 V / 50 Hz • Equipment: Booth substructure with inlet, manual coating opening, and spray gun travel slots. • Recovery: Highly efficient multi-cyclone with cleaning flap and powder collection container. • Extraction / After-filter: Powerful fan unit with integrated pressure monitoring and automatic flushing air filter cleaning. • Fan power after-filter: 15 kW with 12 filter plates (air volume flow: 8000 m³/h) 22 kW with 16 filter plates (air volume flow: 12000 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) or 4.5 kPa (at 12000 m³/h) • Compressed air connection: Min. 6 bar / Max. 10 bar (Recommended: 7 bar) • Compressed air consumption (flushing air filter box): Max. 18 Nm³/h • External dimensions: approx. Height 3.20 m × Length 8.50 m × Width 1.84 m • Internal dimensions (usable space): approx. Height 2.40 m × Width 1.84 m Item location: • 48683 Ahaus / Ottenstein (Münsterland, North Rhine-Westphalia) Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: 7,500,- € net (plus VAT). "Everything from one source: We would be happy to offer you a suitable bank financing option for your project." More items - new and used - can be found in our shop! International shipping costs on request! Codpsz Nyqwsfx Adcehd

Condition: used, Year of construction: 1982, functionality: fully functional, machine/vehicle number: 093185, We offer a drum-type shot blasting machine with a steel belt. Steel belt width – 1800 mm Machine year of manufacture – 1982 Chedpfoz Nqdusx Adcjd Filtration unit capacity – 15,000 m³/hour Filter motor – 30 kW Filter year of manufacture – 2017.

Condition: used, Powder coating booth with filter cart & fluidized bed For sale is a professional, industrial powder coating system from the traditional manufacturer Gema Volstatic. This is the proven MRS system (Multi-recovery System), which ensures highly efficient powder recovery (overspray extraction) and clean working conditions in the workshop. The system is extremely robust and, thanks to the generous manual coating opening, is ideal for manual operation (hand coating). Technical data & connection values: • Manufacturer: Gema Volstatic AG • System / Type: MRS booth with filter cart and fluidized bed • Electrical connection: Voltage 3 x 380 V / 50 Hz (standard three-phase) • Compressed air connection (input pressure): min. 6 bar / max. 10 bar (recommended pressure: 7 bar) • Compressed air quality: Water vapor content max. 1.3 g/m³, oil content max. 0.1 ppm • Compressed air consumption (filter plate cleaning): max. 18 Nm³/h • Fan output of the cleaning unit: • For organic powders: Depending on the number of filter plates, from 7.5 kW to 15 kW (volume flow up to 12,000 m³/h) • For powder coating: From 5.5 kW to 11 kW (volume flow up to 8,800 m³/h) • Fan differential pressure: 4.2 kPa (at 8000 m³/h) to 4.5 kPa (at 12000 m³/h) Dimensions & space requirements: • External dimensions of the booth: approx. Length 6.30 m × Width 2.52 m × Height 3.20 m • Internal dimensions of the booth (working area): approx. Length 6.00 m × Width 1.73 m • Dimensions of the platform: approx. Length 7.64 m × Width 2.45 m × Height 1.16 m Equipment & components: • Booth housing: Solid construction including booth inlet and booth substructure • Filter cart with fluidized bed: Excess powder is extracted downwards. Cedpez N Aivsfx Adcohd The fluidized bed converts the powder into a liquid-like state using compressed air, so that it can be reprocessed and reused in the cycle (enormous material savings!). • Cleaning unit: Unit mounted on top including solenoid valve cover and sealing frame • Safety & control: Integrated pressure monitoring and pneumatic monitoring via the side control unit • Ergonomics: Hand lever valve for easy control directly on the booth, large manual coating opening for the operator, and gun travel slots on the back • CO₂ fire extinguishing system (fire protection system) Item location: 48683 Ahaus / Ottenstein (Münsterland, NRW) Important pick-up & dismantling options (Please note): Option 1: Dismantling by the buyer The system must be professionally dismantled and transported away by the buyer. Option 2: Our "all-inclusive package" (dismantling by us) Alternatively, we will take over the complete, professional dismantling of the system for you. Fixed price for this: €7,500.00 net (plus VAT). "We offer you a suitable bank financing option for your project." You can find more items - new and used - in our shop! International shipping costs on request!