Used Thread rolling machines for sale (68)

Condition: good (used), Year of construction: 2018, Functionality: unexamined, machine/vehicle number: 25001, "- Number of threading stations: 1 to 3 - Chuck usage during the cycle: 2 - Type of tip/reference tip usage mode used during the cycle: 3 - Type of locating tip used: 4 - Position of the locating tip when clamping the workpiece: 5 to 80 mm - Transfer speed between loading and threading stations: 1 to 1000 m/s - Transfer position for loading and unloading: 0 to 795 mm - Transfer position for thread station 1 and/or 2 and/or 3: 0 to 795 mm - Free text for operator support: 9 - Thread type (Syncroll, incremental): 10 - Raw diameter before thread cutting: 1 to 200 mm - Base diameter before thread cutting: 1 to 200 mm - Tooth offset of the workpiece: -5 to +5 mm - Number of workpiece teeth: 1 to 200 - Difference in center distance between workpiece and discharge: 0 to 100 mm - Maximum permissible force (machine failure if exceeded): 0 to 330 kN - Start position adjustment for knurl before thread cutting: 0 to 359.999° - Knurling speed and direction: 0 to 45 rpm - Force tolerance for faulty workpiece (machine failure at the end of the cycle): 0 to 330 kN - Torque tolerance for faulty workpiece (machine failure at end of cycle): 0 to 150 % - Marking diameter for workpiece (Syncroll tapping): 1 to 200 mm - Rotation speed for marking (Syncroll thread cutting): 0 to 45 rpm - Feed speed of the carriage for marking (Syncroll thread cutting): 0.01 to 5 mm/s - Penetration time for marking (Syncroll thread cutting): 0 to 10 s - Penetration speed (Syncroll thread cutting): 0.01 to 5 mm/s - Planing time (Syncroll thread cutting): 0 to 10 s - Return stroke of the slide for metal relief (Syncroll thread cutting): 0 to 5 mm - Return stroke speed of the slide for relief (Syncroll thread cutting): 0.01 to 5 mm/s Cob Hsu R N Hyebhxqjgt - Knurled position at the end of the thread (Syncroll tapping): 0 to 359.999° - Knurling position at thread completion (incremental tapping): 0 to 359.999° - Knurling position at the end of the slide feed (incremental thread cutting): 0 to 359.999° - Knurling speed when approaching the workpiece (incremental thread cutting): 0 to 45 rpm Full supporting documentation (electronic format), including: Operating instructions drawings Certificate of conformity Consumables lists Backup files etc. Additional information: - Available immediately - All UK duties paid - Sale loaded on low loader - Shipping quotes available on request - Nissan Asset Ref: AF206614 - Acquisition cost €500k+ - Condition: Professionally dismantled, tagged, packed and stored in Liverpool, UK"

Condition: new, Year of construction: 2025, Functionality: fully functional, thread length: 12,000 mm, overall weight: 5,000 kg, workpiece diameter (max.): 90 mm, spindle diameter: 80 mm, type of input current: three-phase, roll diameter: 250 mm, spindle speed (max.): 50 rpm, spindle speed (min.): 20 rpm, total height: 2,000 mm, total length: 2,400 mm, total width: 2,000 mm, 60 ton hydraulic thread rolling machine with swivel spindles for infeed and thru-feed rolling Ceb Hbhev Rb Apexqjgt Download PDF file for photographs

Condition: good (used), Year of construction: 1989, Thread rolling machine Ceb Hbswc Aq Rshxqogt ABELE + HÖLTICH RWT 30XG-22 1989

Condition: good (used), Year of construction: 1970, pressure 0,1 - 5 t max. workpiece diameter 2 - 20 mm Cjb Hbhovpabbjxqogt threading length 1000 mm pitch in mm 2 mm diameter of roll spindle taper 40 tool diameter max. 120 mm roll spindle turning speed range 60 - 200 U/min stroke 0 - 10 mm total power requirement 4 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m

Condition: used, Year of construction: 1992, The machine has no mechanical or electrical problems and is in very good condition. Cgjb Hbewfgxkjhxqot

Condition: ready for operation (used), Year of construction: 2003, Functionality: fully functional, CNC Thread, Gear, and Profile Rolling Machine Model ROLLEX 1 Substructure: The substructure of the thread and profile rolling machine consists of welded steel profiles, partially covered with sheet metal. The space for the process lubricant reservoir is located in the front area of the substructure. Main drive: The main drive generates the rotary motion of the rolling tools required for gear rolling. The drive motor is flanged to the base plate of the rolling spindle bearing via the Cyclo Drive gearbox. The rotary motion is transmitted to the rolling spindle via the Schmidt coupling. The machine operates in a speed range of 0 to 30 rpm, with this range further subdivided into 0 to 20 rpm for continuous operation (S1) and 20 to 30 rpm for intermittent operation (S4). The speed is continuously adjustable using a frequency converter. Brand PROFIROLL Type ROLLEX 1 Year of manufacture 2003 Control, Brand, Type Siemens, Sinumerik, 840D Motor power (kW): 18 kW Electrical connection: 400 V Rolling range: Max. rollable workpiece diameter: 40 mm Rolling carriage stroke: 2 x 80 mm Min. / max. center distance of rolling spindles: 160 / 320 mm Rolling spindle height above the machine bed: 160 mm Max. tool diameter: 250 mm Rolling spindle mounting diameter: 120 mm Rolling spindle mounting length: 80 mm Power & Drive Max. rolling force: 100 kN Rolling spindle speed, continuously variable 0-30 rpm Motors Rolling spindle drive: 2 x 13 Nm Hydraulics 50 Hz: 5.5 kW Process lubrication 50 Hz: 0.1 kW Cgjb Hbhxjv Uxq Soqst Central lubrication 50 Hz: 0.06 kW Temperature range: +5–+40 °C Current type/frequency: 3 N/50 Hz Nominal voltage: 400 V Control voltage: 24 V Auxiliary voltage: 24 V/230 V Connected load: 18 kW Nominal current of the machine: 39 A

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, Escofier I300V Gear rolling machine CNC thread rolling and polishing machine Cgeb Hbhxovcc Scjqot manufactured by Escofier, type Flex 40 Syncroll, year 2012 Control Siemens, type Sinumerik

Condition: excellent (used), Year of construction: 2003, Functionality: fully functional, machine/vehicle number: 2666, thread length: 3,000 mm, overall weight: 1,200 kg, workpiece diameter (max.): 30 mm, spindle diameter: 40 mm, type of input current: three-phase, roll diameter: 135 mm, total height: 1,500 mm, total length: 1,000 mm, total width: 1,000 mm, roll width: 70 mm, Excellent used ORT 10 ton Hydraulic Thread Rolling Machine complete with 5 sets of thread dies Ceb Hbhxouafptoqsgt

Condition: ready for operation (used), Year of construction: 1995, BAD DUBEN Model PRX 32 E - CNC Used - in excellent condition Bad Duben: 2 The Cylindrical Thread Roller Brand: BAD DUBEN Model: PRX 32 E - CNC Type: Threading Machines, Thread Rollers, Cylindrical Die Condition: Used, good condition Serial no.: 17 Year: 1995 Max rolling pressure: 16 T Workpiece diameter: 6 - 24 mm. Csb Hbhev Imqyexqsgt Thread Length: 200mm. Roller diameter: 195 mm. Max pitch: 3mm. Speed Range of roller splindles: 40-315 Diam: 210 mm. Weight: 4,500 kg. Visible c/o H.B.R. srl - Calolziocorte (LC) - Italy

Condition: good (used), Year of construction: 1973, pressure 0,5 - 10 t max. workpiece diameter 2 - 50 mm threading length 2000 mm pitch in mm 3 mm diameter of roll spindle taper 54 tool diameter 145 mm roll spindle turning speed range 41 - 129 U/min stroke 0 - 8 mm total power requirement 4,5 kW Cob Hbhsvpaaksxqegt weight of the machine ca. 1,3 t dimensions of the machine ca. 1,3 x 1,2 x 1,2 m

Condition: used, Year of construction: 2007, Manufacturer: ORT Model: RP18 Year : 2007 Maximum rolling thrust 18 Ton Roller shaft diameter 54 mm Roller shaft key 12 mm Minimum diameter workpiece to rolled 3 mm Maximum diameter workpiece to be rolled 60 mm Max.length workpiece rolled in plunge-feed 175 mm Max.length workpiece to rolled in enfilade — Maximum Pitch workpiece to be rolled 4 mm Maximum roller diameter 185 mm Main motor power 7,5 HP Total installed power 11 HP Maximum noise level 80 db Net weight 1800 kg Height Rolling shaft from the floor 1035 mm Cjb Hbev Tqdbshxqjgt Machine width 1450 mm Standard machine depth 900 mm Total machine height 1800 mm

Condition: used, Functionality: fully functional, warranty duration: 6 months, This machine is in very good condition, ready to use with approx. 30 sets of thread rolls or without buying the rolls Cgjbev Rpmvj Hbhxqot

Condition: used, ORT RP18B overhauled Cjb Hbjuua H Rohxqogt

Condition: used, Thread rolling machine, cold rolling machine, thread rolling machine, profile rolling machine Manufacturer PEE-WEE Type UPW 24 Factory no. P07.0003-144 Year of manufacture 2007 Rolling force max. 24 tons. Tool diameter max. 270 mm Rolling spindle diameter 69.85 mm Tool bore diameter 70 mm (nominal diameter) Cjbouz If No Hbhxqjgt Holding length, tool length max. 180 mm Workpiece diameter max. 50 mm Hydraulic motor power 3 kW Roller drive motor power approx. 5.5 kW Mains connection 400 volts, 50 Hz, 10 kW - swiveling rolling spindle for threaded continuous rolls - Rolling spindle speed in 4 stages via gear change - Hydraulic system integrated in the machine bed - Operating instructions with electrical plan Space requirement L x W x H 2000 x 1450 x 190 mm Weight approx. 3 tons. very good condition Plunging rolls: The thread rolling tools with the same pitch as the workpiece form the thread by penetrating the workpiece to the nominal diameter. The maximum thread length is as long as the rolling tools are wide. Continuous rolling: When the thread length is greater than the rolling tool width. Continuous tools have 3 sections - the inlet, the calibration part and the outlet. Grooved rollers have no pitch and are swiveled with the pitch angle of the profile to be rolled. Pitched rollers differ from grooved rollers in that they have a pitch in the profile. The sum of the pitch angle and the swivel angle gives the pitch angle in the workpiece.

Condition: used, Thread rolling machine, thread rolling machine, segment thread rolling machine, cold forming machine, thread rolling head, rolling head -Manufacturer:BWF, thread rolling head -Type: RK 12-20 -Thread rollers: M24 x 1.5 -Dimensions: Ø 120 x 180 mm Cgeb Hbhxju Tyvheqet -Weight: 5.6 kg

Condition: excellent (used), pressure 0,5 - 20 t max. workpiece diameter 5 - 75 mm threading length 2000 mm Cgjb Hjvpaa Robhxqjt pitch in mm 8 mm diameter of roll spindle taper 69,85 tool diameter 200 mm roll spindle turning speed range 20 - 90 U/min stroke 0 - 20 mm total power requirement 7,5 kW weight of the machine ca. 3,1 t dimensions of the machine ca. 1,9 x 1,1 x 1,2 m

Condition: good (used), Functionality: fully functional, UPW 12.5x70 Cjb Hbhov Htvaexqogt

Condition: good (used), Year of construction: 2003, 1 x thread rolling machine Abele + Höltich Rollwaltechnik RWT 20 X-FR-7.5 Kw Year of manufacture: 2003 Technical data: Pressure output: 200 kN. Diameter: 2 - 60 mm Length of mounting: 125 mm Roll diameter: 125 - 175 mm Ceb Hovzyfwebhxqegt Max. pitch: 4 mm Shaft mounting: 54 mm The machine can be viewed under power by appointment.

Condition: refurbished (used), Thread rolling machine ORT RP18 B 2-roll overhauled Cob Hevxa Dbsbhxqogt See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy Power (Ton): 18 Number of rollers: 2

Condition: used, Power (Ton): 17 Number of rollers: 2 CNC: Yes CNC thread rolling machine - electronic retrofit with Siemens PLC and touchscreen Thommen PR17 CNC 2-roll Rollers rotation speed electronically managed Position and speed managed electronically Spindles diameter 54mm 2 pairs of supports (closed and open) The machine is in our warehouse in Gussago BS, under power Cgjb Hbhsilh Tijxqet Test run possible Mimu Machine Tools Italy

Condition: used, Year of construction: 2004, CNC Thread rolling and gear burnishing machine ESCOFIER P440 CN CNC Siemens New 2004 - like new 2-roll 2 moving heads 4000 daN rolling pressure Cgjb Hbhxet Ek Sfoqet workpiece diameter: 100mm max. tool diameter: 180-245mm Swivelling: +/-6°, forward speed: 0.1-20mm/s, reverse speed: 0.1-30mm/s motor power: 8.6kW New: 2004 Condition: like new under power in our warehouse Mimu Machine Tools (Italy)

Condition: used, Year of construction: 2003, Thread rolling machine ESCOFIER H20Z 2-roll 2 moving heads (in sync) 2 - 20 Ton rolling pressure Cgjb Hbot Hmv Nohxqot workpiece diameter: 75mm max. tool diameter: 140-200 mm Max plunge width 160 mm Shafts dia: 69.95 Swivelling: +/-6°, New: 2003 under power in our warehouse, M i M u machine tools

Condition: used, Thread rolling machine ORT RP18 2-roll Spindles diameter 69.95mm Cgjb Hbst Apugjhxqet See video The machine is in our warehouse in Gussago BS, under power Test run possible Mimu Machine Tools Italy

Condition: used, Thread rolling machine ORT RP30U 2-roll Cjbet H Ty Uo Hbhxqegt 30 ton swiveling heads variable speed drive #1331 Under power in our warehouse in Gussago BS. Test run possible M i m u Machine Tools Italy Rolling is a mechanical process without chip removal that can be performed cold or hot, having as a purpose the improvement of the surface finish (therefore the fatigue behavior

Condition: refurbished (used), Year of construction: 2009, ORT RP30 MS 2-roll 30 tons thread rolling, knurling, small gears 2009 = YOM Cobjuykz Dj Hbhxqsgt Electronic overhaul and electronic retrofit with Siemens PLC (2025) The machine is visible working in our warehouse in Gussago BS. Possibility of proof M i m u Machine Tools Power (Ton): 30 Number of rollers: 2 PLC: Yes