Year of construction: 1975, Condition: good (used), Functionality: fully functional, Peeling machine / Centering-Charging device Peeling machine Angelo Cremona SFL 2700 x 1100 - 1975 Centrering and Charging device CTA 4 - 1976 Veneer unwinding Bertram - 1995 To be dismantled by buyer Crelq Sst D A S Isq Ncsb

Condition: excellent (used), Year of construction: 2012, Functionality: fully functional, machine/vehicle number: 30112, total length: 3,600 mm, total height: 1,630 mm, total width: 1,800 mm, overall weight: 8,000 kg, material thickness: 250 mm, material width: 250 mm, Flat cutter / Veneer guillotine DB25T reinforced version with roller table at the inlet, for veneers and wood veneers. The machine is fully operational, dismantled and ready for shipment. Cutting range from 0.15mm to 5mm. Cjlqjwbpkno Sq Ncerb The machine can work in three modes: manual, semi-automatic, automatic. Technical parameters: Year of production: 2012 Maximum thickness of cut material - 250mm Maximum width of cut material - 250mm Length of cut material from 0.8m to 6m Blade length 1500mm Height of worktable - 9000mm Feeding speed - 60m/min Overall dimensions 3600x1630x1800mm Net weight: 8000 kg The price given in the advertisement includes an automatic feeder transporting the material around the machine.

Condition: used, Veneer scissors, veneer punch, fine cutting machine, fine cutting scissors -Transfer in current condition as seen -Cutting length: 4750 mm -Motor manufacturer: Demag -Type: Motor 24/14K4 Cjlq Sqscdwd So Ncjrb -Type: Gearbox 92D -Motor power: 5 kW -Dimensions: 5700/1300/H1900 mm -Weight: approx. 4500 kg

Condition: used, Year of construction: 2013, SECOND-HAND CROSS-CUTTING VENEER PACK GUILLOTINE CASATI MOD. TO/CC1450 - Cutting lenght mm. 1450 - Pressor stroke mm. 100 - Max. rear feed width mm. 600 - Min. rear feed width mm. 25 Cslq Sq Njv Tczlecjrb - Hydraulic unit motor power kw 3 - Rear feed motor power kw 0,37 - Year 2013

Condition: good (used), Code: 0583 Brand: RAVNE Crslq Sq Ned Im I Rjceb Model: 3700 Integral steel Knife (blade) for veneer guillotine mm 3600 Length mm 3700 Height mm 110 Thickness mm 12

Condition: new, Year of construction: 2020, The machine that makes veneer pliable and supple for a variety of applications. Before the veneer is put through the flexer, it must be pre-treated. In both the temperature and pressure preliminary treatment, the backer is applied to the veneer. The properties of the veneer are changed without influencing the appearance of the veneer. Due to the change in structure, post-forming quality can be achieved. This veneer can be wrapped around tight bends without splitting or cracking. A multi-head flexer, which increases the yield, has been designed especially for serial production. Crelq Sqebnu Ucj Nceb Electromotoric roller-height-adjustment and digital position display.

Condition: used, Year of construction: 1966, Functionality: fully functional, machine/vehicle number: 0371, Veneer splicing machine Manufacturer: Kuper Type: FW 100 Crelq Sqsvk U The Ncsb Machine No: 0371 Year of manufacture: 1966 Stand projection: 1150 mm Throughput speed: approx. 10 - 30 m min. Drive: brake motor 0.55 kW 380 V, optionally 220 V three-phase current Total connected load: 1.8 kW Heating: 7 V 120 W Weight: 630 kg Space required: 2300 / 800 mm Box dimensions: 2450 / 1450 / 900 mm Ship space: 3.2 m³

Year of construction: 1995, Condition: good (used), Kuper veneer zig-zag splicer machine, type FW/ 1200-E year of manufacture 1995 S/N 3508 3179 Cjlqehbp Ifj Sq Ncorb Specific features of the KUPER FW 1200 E: high feed speed of 60 m/min. electronically infinitely variable width of zig-zag pattern glue thread cutting device max. veneer thickness : 3,0 mm min. veneer thickness : 0,3 mm glue thread with hot air heating Compressed air discus for transporting the veneer over the veneer table control via foot pedal feed speed : 35-60m / min Volt: 400 V, 50 Hz Total power 1,35 kW working height 915mm weight approx. : 440 kg Dimension : 2,12m x 0,73m x 1,55m

Condition: excellent (used), Veneer gluing machine FWJ900 With glue veneer, neat condition Max. veneer thickness 2 mm, min. 0.4 mm Control via foot pedal Floor model, feed speed 7 mm, throat 900 mm, weight approx. 200 kg, dimensions: 1400 x 500 x 1680 mm Colq Sq Novkfncocsrb

Condition: excellent (used), Year of construction: 2014, cutting length (max.): 330 mm, cutting width (max.): 520 mm, cutting height (max.): 100 mm, overall weight: 10,000 kg, total length: 5,300 mm, total width: 1,800 mm, total height: 1,900 mm, Equipment: safety light barrier, Double-blade veneer shears Manufacturer Monguzzi / Fisher Rückle Crslq Sqovrcf Us Nceb Type TRM 3300 / 520 Year of manufacture 2014 Double-blade veneer shears in heavy-duty design This machine enables parallel cutting of veneer bundles in one pass. It has a robust structure, the pressure beam and the knife are hydraulically driven. Cutting length 3300 mm Cutting width approx. 10 - 520 mm Veneer thickness between 0.2 - approx. 1.5 mm (depending on the veneer) Cutting height approx. 100 mm Dimensions approx. 5300 x 1800 x 1900 mm Weight approx. 10,000 kg

Condition: good (used), Code: 0193 Celoqzky Ejq Sq Ncsrb Brand: CASATI MACCHINE Model: BIG 3200 - CE Standard Hydraulic two knives veneer pack guillotine shear - CE Standard Description: Sturdy steel made structure, cast iron knife beam. Self-lubrificating prismatic slide-ways The machine allows, with a single operation, to cut the veneer pack on both sides to be trimmed - The simultaneous trimming on two sides of the veneer pack is carried out thanks to the movement at the same time, of two knives, one fitted on a fixed structure and the other one on a moving part - The machine is equipped with an adjustable rear shoulder, as well as with a pressor to clamp the veneer pack during cutting operations. Possibility of working as a single guillotine shear Useful cutting length (as double guillotine shear) mm 3200 Useful cutting length (as single guillotine shear) mm 3550 Pressore stroke mm 100 Pressor width mm 550 Min width to be cut mm 18 Max width to be cut mm 530 Scrap adjustment field mm 0/50 Photoelectric cells Electronic programmer allowing to program the number of cuts to be effectuated and the relevant width Perimeter protections Total power installed Kw 13, 9 Operating pressure bar 6/7 Overall dimensions mm 5200 x 1700 x 1800 h Weight kg 9000

Condition: used, Pile cutter, stack cutter, guillotine SCHNEIDER type Senator 155 Rubber, paper and funi scissors Machine. No. 60178 Year of construction 1968 Cutting length 1550 mm Cutting thickness approx. 125 mm Insert height 140 mm Backgauge max. 1550 mm Motor power blade drive 5.5 kW Mains connection 380 Volt, 50 Hz - 2-hand control for lift release - Automatic pressing by hold-down device presses the stack of paper onto the table - Manual hold-down and lift release via foot switch (works) - Setback (backgauge) up to 1550 mm (can be adjusted manually via a handwheel) - Retrofitted electrical control without function, without circuit diagrams, without operating instructions - Backgauge adjustment via servomotor (motor, controller and control unit available, without function) Crslq Sq Nodzqnyscsb Space requirement L x W x H 300 x 270 x 165 cm Weight 5100 kg good condition Ideal for cutting paper, cardboard, leather, cork, rubber or fabric-reinforced rubber Selling price without the 20 mm steel plate on which the machine stands in the warehouse.

Condition: used, usedmake Schanbachertype manualcutting width 360 mmnumber of blades 24finger joint length pitch - 30 x 100 mmweight approx. 60 kgstorage location 97447 Gerolzhofen, free loaded, unpackeddelivery as seen,without guarantee and warranty Crslqevxr N Ne Sq Ncsb

Condition: ready for operation (used), Panel length: 3200mm, panel width: 1000mm, max. workpiece thickness: 38mm, min. infeed length: 500mm. Celqsm Habds Sq Ncsrb

Condition: used, Year of construction: 1985, Stand projection: 900mm Celjvpplpsq Sq Ncorb Feed rate: 15 m/min

Condition: ready for operation (used), Year of construction: 2025, Main Drive Pressing force 1200 kN Additional Equipment Mylar Foil Attached to Upper and Lower Press Plates Electronic Flatness Control (EFC) for Incorrect Loading Protection Crelq Sq Novy I U Dscjb This ITALPRESSE XL/6 30-13 PM BO veneer press was manufactured in 2025. Consider the opportunity to buy this ITALPRESSE XL/6 30-13 PM BO veneer press. Contact us for more information. Application Types Veneering

Year of construction: 1995, Condition: excellent (used), Functionality: fully functional, Slicer plant Marunaka SL135T Veneer Slicer Cjlq Sqsv Dx Tls Ncjrb Year of Manufacture: 1995 Technical Condition: Very good Technical Specifications: - Maximum material width: 135 mm - Maximum material height: 300 mm - Veneer thickness range: 1-6 mm

Condition: good (used), Manufacturer: Hymen Cslqoh Eiidj Sq Ncerb Maximum cutting length: 2300 mm

Condition: excellent (used), Veneer gluing machine Working width 780 mm With paper and glue thread Cjlou R I Ezeq Sq Ncerb

Year of construction: 1995, Condition: ready for operation (used), Cutting length: 2330mm, insertion height: 80mm, length: 3410mm, width: 1650mm, height: 1570mm, weight: 2.4t. Crolqjk Nm Nge Sq Ncob

Condition: used, used manufactured by Kuper type Mini 420 Cjlq Sovwf Dwsq Ncorb range 420 mm thread heating system electrical - new desk model required space ca. l x w x h mm 600 x 400 x 400 weight ca. 20 kg located in 97447 Gerolzhofen sale in current condition as seen - free on truck - without guarantee and guarantee

Condition: good (used), mechanical cutting max cutting length 2,6m max cutting height 50mm Celqohv Hl Ao Sq Ncorb fence with manual setting

Condition: used, cutting length: 3.000 mm Saw blade diameter: 180 mm engine: 2.5 hp Crelq Sjlf H S Hjq Nceb Veneer saw Scheer FM 2-3000 for sawing or cutting veneer or thin wood.

Condition: new, Veneer Longitudinal Splicer with Gluing make Fisher & Rückle type IMPETUM 1200 Cjlq Sqoph Su Hs Ncerb incl. 3 mm veneer thickness set incl. foot pedal For quick and easy modification of the IMPETUM for veneer strip length up to 3 mm. The kit includes a food pedal for manual release of the veneer infeed. For the gluing and longitudinal splicing of parallel veneer strips on one process with standard urea-based glues. Capacity: Thru-feed speed (related to practice value) approx. 20 - 30 m/min. Technical data: Veneer strips with extreme tension and waviness must not be used. Veneer strip length (in fibre direction) 380 - 3800 mm Veneer strip width (cross to fibre direction) 45 - 1200 mm Veneer strip thickness 0.4 - 3 mm Feed speed 5 - 50 m/min. Features: Data storage of the machine settings for recurring orders. Electric drives separate for chain drive and glue application. Glue application onto the newly fed veneer strip, which improves the joint quality significantly. Solid and almost wear-free stainless steel transport chains. 6 Heating zones for different temperature settings. Infinitely variable splicing speeds. Touch panel with temperature, speed and pressure display. Easy access to glue pot for quick refilling or cleaning. Extended operation time of glue due to integrated glue pot cooling. Glue dosage for a constant and even glue application without overglue.

Condition: ready for operation (used), Year of construction: 2000, Cross veneer splicing machine / Veneer cross splicing machine manufactured by Fisher Rückle Type DELTA FZX-28 complete with intermediate conveyor, edge processing unit, stacking device with lifting table Veneer strip length up to max. 2800 mm Veneer strip thickness approx. 0.4 - 1.5 mm (depending on the veneer) Veneer strip widths approx. 70 - 600 mm (across the grain) Glue types based on urea or PVAC This machine makes it possible to join veneer sheets crosswise with glue (Pvac or Urea). It is necessary that the veneer sheets are pre-glued. The machine guarantees excellent joints of any type of veneer. The gluing is carried out by a system of hydraulic cylinders with horizontal pressure, which allows the veneer sheets to be joined without gaps along the entire length. The heavy and robust construction of the machine guarantees a long service life and reliable operation. Operation of the machine is simple and intuitive thanks to a clearly laid out control panel. Separate pressure gauges give the operator direct access to the pressures of the heating plates, the horizontal pressing system, etc. as well as short changeover times. The upper cross beam of the machine is raised to allow easy and quick access to the heating plates for cleaning and maintenance. Crslq Sqjva Ulpe Ncsb The machine is checked when ordered and delivered with warranty.