Condition: used, machine/vehicle number: 11181, Rotor diameter: 400 mm Rotor width: 600 mm 3-knife rotor, 2 stator knife rows Inlet cross section approx. 400 x 600 mm Dolqueghgkqsnpgscg Drive motor 30 kW

Condition: new, The ZSH chipper series is specially designed for forestry, horticultural and municipal operations. Mainly these chippers are used for volume reduction of tree and shrub cuttings as well as smaller trunk diameters. Dslsghgi Eoqunpgecg The wood chips produced are suitable for combustion in wood chip heating systems with screw conveyors or also as a preliminary stage in pellet production. The machines are robust, reliable, easy to operate, powerful and produce wood chips of consistent quality and size. Other Low-cost solution for the production of wood chips l Compact design l User-friendly l Low energy consumption

Condition: new, machine/vehicle number: AMIS Kabelaufbereitung, Plant consisting of granulator, sorting table for the separation of free and copper granules, suction system and control cabinet. Each as transportable elements pre-assembled on base plates. Delqeghgizsunpgecg Advantages of the compact plant: low overall height, low space requirement, easy-to-clean and easy-to-maintain arrangement of components, short assembly time and, last but not least, the favorable price.

Condition: new, machine/vehicle number: 10463, The AR series are low-speed rotors. They are available with 2, 4, 6 or 8 worm shafts. The machines are designed so that each screw unit is independent and mounted separately in the chassis. Dceleghgipoqunpgsg Screw shredders are designed for shredding friable materials (wood, paper, gypsum, mineral wool, etc.). The machines are largely insensitive to interfering materials such as glass, iron parts, stones, etc. The AR series is ideally suited for use as a bale breaker for e.g. PET bottle bales.

Condition: used, machine/vehicle number: 10976, 3-blade rotor Dslqunoghgihepgjcg 2 rows of stator blades Rotor diameter: 350 mm Rotor width: 250 mm Inlet cross-section for profiles: approx. 250 x 100 mm Machine in noise-protection enclosure

Condition: used, machine/vehicle number: 8802, Inlet cross section approx. 650x1000 mm Dcolsghgiajqunpgjg 3-knife rotor (staggered knives) 2 stator knife rows Rotor diameter 500 mm Rotor width 1000 mm

Condition: used, machine/vehicle number: 10930, Rotor diameter: 400 mm Dcolqjghghrsunpgjg Rotor width: 500 mm Rotor blades: 6 Stator blades: 4 Inlet cross-section approx. 500 x 400 mm Drive motor: 18.5 kW

Condition: used, machine/vehicle number: 10460, 5-blade rotor 2 rows of stator blades Rotor diameter 400 mm Dcjlqjghgg Ujunpgjg Working width 600 mm Inlet cross-section approx. 500 x 600 mm

Condition: used, machine/vehicle number: 11056, 3-blade rotor Dcelqoghghkounpgog 2 rows of stator blades Rotor diameter: 350 mm Working width: 600 mm Inlet cross-section: approx. 600 x 450 mm Machine with noise protection box

Condition: used, machine/vehicle number: 10461, 3-blade rotor (offset blades) 2 rows of stator blades Rotor diameter 300 mm Working width 600 mm Doljghgg Roqunpgocg Inlet cross-section approx. 440 x 600 mm

Condition: used, machine/vehicle number: 11058, 3-blade rotor 8 rotor blades (staggered) 2 rows of stator blades Rotor diameter: 200 mm Djloghgg Hjqunpgocg Rotor speed: approx. 900 rpm Working width: 880 mm Inlet cross-section: approx. 130 x 845 mm

Condition: used, machine/vehicle number: 3349, 2-blade double rotor Delqunpsghgf Njgecg 3 rows of stator blades Rotor diameter: 150 mm Working width: 200 mm Inlet cross-section: approx. 350 x 210 mm

Condition: used, machine/vehicle number: 10875, 3-blade rotor 2 rows of stator blades Rotor diameter: 280 mm Rotor width: 600 mm Dceloghgfzsqunpgog Inlet cross-section: approx. 280 x 600 mm Weight: approx. 800 kg

Condition: used, machine/vehicle number: 9895, 3-blade rotor (offset blades) 2 rows of stator blades Rotor diameter: 500 mm Dcelqusghgfwjnpgsg Working width: 700 mm Inlet cross-section: approx. 500 x 700 mm

Condition: new, machine/vehicle number: Baureihe GSP, When crushing long pipes and profiles, conventional granulators are faced with considerable problems. In most cases, pits or platforms are needed to allow feeding of the long and bulky parts. This is why ZERMA has developed the GSP series. Thanks to the almost horizontal feed hopper, long parts can be conveniently fed and the risk of blockage is eliminated as the machine doses automatically. In the event of overfilling of the grinding chamber, no further material is accepted until work can continue without motor overload. Dcjlsghgftjqunpgsg ZERMA also offers a wide range of options such as exhaust systems, conveyor belts, metal detectors, fines separators, etc.

Condition: new, machine/vehicle number: GSH, The ZERMA GSH series granulators are extremely stable machines for the toughest demands and tailored to the versatile requirements of a modern recycling operation. The housings, manufactured in heavy steel/welded construction, withstand even extraordinary loads. Bearing, blade mounting and rotor shaft are far oversized and therefore extremely resilient. By simple retooling, massive lumps and thick-walled pipes as well as hollow bodies and foils can be shredded effortlessly. Depending on the individual task (and also for temperature-sensitive materials), different rotor variants are available, but they all have one thing in common: the modern and superior V-cut technology. All machines of the GSH series always deliver a high-quality regrind - whether from bottle crates, profiles, sheets, foils, or start-up lumps and tubes. They are economical, very reliable, easy to clean, and have a long service life. In combination with the extensive range of ZERMA options, accessories (such as extraction systems, conveyor belts, metal detectors, fines separators, roller feed systems, etc.) as well as spare parts, an individually optimized size reduction system is created. The advantages are shown in a considerably reduced effort in terms of costs, time and personnel. Sophisticated housing design The housing is divided diagonally in the middle and the upper part with feed hopper can be opened hydraulically so that the rotor is completely exposed for knife changes and cleaning. The sieve insert is also held by a hydraulically swiveling sieve basket, and accessibility is thus optimal for removal and installation of the sieve. Reversible sieve insert. Djlqsghgfleunpgjcg Robust external bearing Another well thought-out design feature is the bearing arrangement outside the machine. Robust roller bearings in steel bearing housings guarantee a long service life and are ideal for the toughest conditions. The external bearing prevents grease from entering the grinding chamber, and vice versa, grinding material or fines from entering the bearing. This is another significant advantage, especially when the machine is operated in wet conditions. Flywheel In order to compensate for shock loads during comminution, a flywheel is available as an option. For attachment, the rotors have a second shaft end as standard. High operational reliability All granulators comply with EC machinery directives and are CE marked. Accident safety is ensured, for example, by overrun protection devices with limit switches and hydraulically unlockable check valves.

Condition: new, The Zerma ZCS Shredder integrates leading shredder and granulator technology into a single compact unit. With the development of the shredder and granulator combination, ZERMA has successfully continued the expansion of its product portfolio. By combining the proven design and high torque of the single shaft shredder with an extremely effective granulator, ZERMA can deliver a reliable and compact pre-shredding system. The shredder and the granulator are driven individually, which contributes to better control of the whole process. To increase the efficiency, ZERMA Smart Drive System is used to constantly control the load and adjust the amperage accordingly, resulting in reduced power consumption. The ZERMA ZCS can be used in any application where predictable quality in size reduction and granulation is required. Typical applications include, but are not limited to, the following: Injection Molding Thermoforming Dolqoghgd Seunpgecg Blow molding Recycling Extrusion Waste

Condition: new, The solution for shredding large, long pipes and profiles. The ZRS series has been specially developed for shredding pipes with diameters of up to 1,300 mm and made of different materials such as PE, PP, PVC. These machines can directly shred plastic pipes up to a length of 9 meters without prior cutting or sawing. At the heart of the machines are rotors with diameters of up to 1,500 mm, which can be equipped with up to 206 cutting crowns and gently shred the material at low speed. Dcolqsghgd Ieunpgeg The pipe is fed into a closed feed trough in which the pipe is pressed against the rotor by means of a hydraulic ram. The pre-shredded material is then fed from the shredder to a granulator via a conveyor belt. The granulator grinds the material into a directly processable regrind. The entire plant is operated automatically via a central control unit. Another advantage of the plant is the low energy requirement, the avoidance of power peaks, and the minimization of accident risks during pre-shredding.

Condition: new, General: The single shaft shredders of the ZTS-/ZTTS-series have been specially developed for the shredding of whole or pre-shredded tyres. Both the ZTS and ZTTS shredders have a large rotor diameter of 760 mm and working widths of 1500 to 3000 mm. Both types are equipped with oversized external bearings and double drives. The tangential infeed ensures optimum feeding of the input material without the need for an additional hydraulic pusher. All tyre shredders have special wear protection in all relevant machine areas. ZTS and ZTTS differ in the number of rows of stator knives and in the screen perforation installed. Applications: Machines of the ZTS series have one stator knife row and are therefore used for the first stage in the pre-shredding of car tyres or other large, solid parts to a final fineness of approx. 150 mm. For the second stage a ZTTS shredder is used, which grinds the material to approx. 20 mm. The well thought-out machine design together with the adjustable blade gap allow an optimal separation of rubber and steel fractions. In a further stage, the steel fractions can be separated via a strong magnetic separator. Dolqunjghgd Dopgscg

Condition: new, ZXS 1500 – 2x75kW – Working cross-section: 1500 x 1490mm ZXS 2000 – 2x90kW – Working cross-section: 1500 x 1900mm ZXS 3000 – 2x110kW – Working cross-section: 1500 x 2700mm ZXS series: The single-shaft shredder for demanding shredding tasks. The machines are extremely robust and achieve high throughput rates. Working widths from 1500 to 3000 mm and rotor diameters of 750 mm are available as standard. Wide range of applications for the ZXS series: Many other materials can be shredded with the ZXS series and prepared for recycling, such as: B. Old cables, PET bottles, paper and cardboard, etc. Get advice on how your material can be shredded and recycled. Dslqunjghgdyspgocg

Condition: new, GENERAL Typical of the single-shaft shredders in the ZIS series are their voluminous grinding chambers, the stability of which is ensured by their welded steel construction. The rotor diameter is also generously dimensioned at 457 mm. The rotor widths are 1200, 1500 and 2000 mm. The ZIS series retains all the advantages of the ZSS series: drive via an oversized gearbox, reversible blades, screwed blade holders, robust, external bearings, hydraulic screen basket, easy handling and technically sophisticated control systems. APPLICATIONS The ZIS series was primarily developed for large-volume hollow bodies: IBCs, garbage cans, pallets, rain barrels, etc. The machine can also be used universally for countless applications in the plastics and wood industries. Like all Zerma shredders, the machines in the ZIS series can also be equipped with various wear options. ADVANTAGES Dcslqunpeghgdvegog 35% larger grinding chamber volume compared to the ZSS series Internal hydraulic slide Increased slide speed in the return movement Compact dimensions Knife holders screwed into rotor pockets

Condition: new, ZERMA single shaft shredders of the ZPS series have universal application possibilities. They are suitable for shredding heavy and massive parts that cannot be directly shredded on a granulator. The large and heavy rotor of the shredder series ZPS , the low rotor speed as well as the high torque ensure low current peaks and thus avoid high energy costs. Single-shaft shredders from the ZPS series are designed for a wide range of applications. Depending on the task, the shredded material can be used directly in the manufacturing process, or it can be subsequently ground in a granulator. The shredders from the ZPS series are equipped with a 2-step hydraulic system that prevents the rotor from blocking. Knives and knife holders are completely screwed into the rotor. Generously dimensioned, externally located rotor bearings and a hydraulically swivelling screen basket are part of the standard equipment of every shredder. The machines can be extended or upgraded with numerous options, such as rotor cooling or Hardox wear armouring. Compared to the ZSS shredders, the machines of the ZPS series have a higher contact pressure device, which optimises the acceptance behaviour between the pusher and the rotor, especially with large-volume parts or pipes. Djlqunpeghgdnogocg

Condition: new, ZHS 600 - 18.5/22 kW Rotor diameter: 400 mm Working cross-section: 520 x 470 mm ZHS 850 - 30 kW Rotor diameter: 400 mm Working cross-section: 800 x 820 mm ZHS 1100 - 37 kW Rotor diameter: 400 mm Working cross-section: 1,080 x 1,040 mm ZHS 1400 - 55 kW Rotor diameter: 400 mm Working cross-section: 1,400 x 1,380 mm ZHS 1500 - 90/110 kW Rotor diameter: 600 mm Working cross-section: 1,360 x 1,430 mm ZHS 1700 - 75 kW Rotor diameter: 400 mm Working cross-section: 1,640 x 1,550 mm ZHS 2000 - 2 x 90 kW Dolqunpoghgdkegocg Rotor diameter: 400/600 mm Working cross-section: 1,920 x 1,550 mm ZHS 2600 - 2 x 90 kW Rotor diameter: 400/600 mm Working cross-section: 2,480 x 1,550 mm   ZHS - economical all-rounders The ZHS series has a load-dependent hydraulic slide that feeds the material to the rotor in a slightly inclined position in a horizontal movement. The material is cut between the rotor and stator blades until it falls through the sieve installed and screwed under the rotor. The replaceable sieve defines the final grain size. The shredded material can be discharged via a conveyor belt, a discharge screw or pneumatically using a suction system. The single-shaft shredders of the ZHS series are designed for light to medium-heavy loads in the plastics industry.   Technical details: Roller-bearing hydraulic slide with horizontal movement Screwed knives and knife holders Optionally with segment base for particularly thin parts and materials Aggressiveness of the rotor can be reduced or increased by screwing on filler pieces Can be combined in a 2-stage system with a cutting mill as a pre-shredder

Condition: new, With the cost-effective single-shaft shredders of the ZWS series, a wide range of shredding tasks can be realized, e.g. as a preliminary stage for subsequent briquetting, for the production of wood chips for firing or return to the particleboard industry. Depending on throughput and material, the machines can still be individually adapted to the task. Typical feed materials for shredding are: Large panel and board sections Wooden pallets Waste from carpentry workshops Packaging wood Construction and demolition wood Veneers, MDF and chipboard Dcslqjghgdgjunpgsg

Condition: new, machine/vehicle number: ZWS 600 SMART, The ZWS 600 SMART serves as a supplement to the ZWS series. The series was designed as a cost-effective solution specifically for shredding wood residues in small and medium-sized wood processing companies. Delquneghgdcjpgecg AT A GLANCE: Compact design Stable welded steel construction Large-volume hopper for material feeding Rotor made of solid steel with screwed knife holders PLC control for fully automatic operation Technical data SMART 600: Inlet 600 x 840 mm Motor 11 / 15 kW Rotor diameter 250 mm Rotor speed 80 - 120 13 rotor knives Technical data SMART 600 S: Inlet 600 x 840 mm Motor 18.5 / 22 / 30 kW Rotor diameter 250 mm Rotor speed 80 - 120 26 rotor knives