Condition: used, Opening: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Djhxowbhrdsznp Rekl Rotor diameter: approx. 560 mm

Year of construction: 2017, Condition: used, screw size 30 mm Capacity 1000 kg/h Doheb Niqhexznp Rekl Drive 240 kW L/D

Condition: good (used), Baler HSM V-Press 504 waste paper press Machine in perfect condition, like new. Machine purchased from a warehouse, unused. Description: -HSM TCS (TorsionControlSystem) for controlling the inclination of the press plate Modern microprocessor control with membrane keyboard and graphic text display Suitable for both cardboard and foil Automatic start of the pressing process after closing the door Massive pressure plate and extremely stable pressure plate guide To fill the press, the upper half of the door opens to the right Door lock with knee lever for quick and safe door opening Dohxzjwh Nqbjnp Rskl Manual bale strapping with polyester tape Pressure force: 40 kN Specific pressure force: 11.2 N/cm2 Drive power: 1.1 kW Voltage frequency: 230V / 50Hz Idle cycle time: 27 sec. Press capacity at idle speed (theor.): 3.75 m3/h Fill level: 661 mm Width x height of filling opening: 700 x 470 mm Bale length x bale width x bale height: 700 x 500 x 600 mm Bale weight: 60 kg Width x depth x height: 1020 x 812 x 1922 mm Weight: 290 kg Related product line: V-Press Consumable type: strapping tape

Condition: used, Year of construction: 2006, operating hours: 3,459 h, fuel: diesel, Year of manufacture: 2006 Colour: Green Field of application: Construction Drive: Wheel Empty weight: 6.500 kg CE mark: yes Dkehswazgfsxznp Rel Komptech Hurrikan. Year: 2006. Hours: 3459. Max weight: 6500 kg. CE Machine. Axle load: 600 kg Alko axle. 53 KVA. 400 V 63 A. New Perkins diesel engine. Tyres: 285/70R19,5 80%. German Machine including german street registration! ID NR: 391. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: excellent (used), Year of construction: 2019, operating hours: 8,000 h, Functionality: fully functional, machine/vehicle number: REFLEX 36290, cutting force: 650 t, power: 200 kW (271.92 HP), net weight: 56,280 kg, tool mount: 800 mm, filling weight (max.): 2,950,000 g, total width: 2,550 mm, total length: 15,176 mm, total height: 3,655 mm, overall weight: 62,080 kg, type of input current: three-phase, operating pressure: 315 bar, pressure: 350 bar, construction width: 4,290 mm, This is a fully functional machine that will be ready for delivery in December 2025. It includes a loading table - it has dimensions of 6000 * 2500 mm. The length of the chamber is 6000 mm. The expected status as of December 31, 2025 will be approximately 8,800 hours. The machine is located at: U Panelárny 461, Předměřice nad Labem. Djhewhnbfexznp Rekl

Year of construction: 2019, Condition: used, Functionality: unexamined, Selector 400 Basic Package Spiral Wave Screen Deck AA209-150 - 20 Waves Dkohxsv Sqg Hoznp Rol

Condition: used, Double-shaft shredder Djhxswbhqtsznp Rjkl Drive 37.50 KW

Condition: reconditioned (used), No.: 2587 1 used, functionally tested pelletizing-extrusion line, Dkjhsh Eydbsxznp Rjl output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 00 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 3000 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Condition: ready for operation (used), Percussion Mill MFL Type R-CI 100-100 Feed opening 1020 x 760 mm Power: 90 kW E-Motor Weight 9 Tons Dshswbbivsxznp Rekl

Year of construction: 2018, operating hours: 7,255 h, Condition: good (used), machine/vehicle number: 75070, Mnr. 75070 / Screen with 3 fraction - Fine fraction (mm): 0/10…25, Medium fraction (mm): 10…25/60…90, Coarse fraction (mm): 90…120 / 75 kV/A diesel generator / hopper volume: 7 m3 / Dkehxzogrn Aconp Rsl filling height (mm): 3.450 / filling length (mm): 3.750 / max. discharge height medium fraction (mm): 3.500 / max. discharge height coarse fraction (mm): 2.850 / weight ca. 21 to / transport length (mm): 11.500 / transport width (mm): 2.250 / transport height (mm): 4.000 / throughput depending on type of material till ca. 200 m3/h / ca. 6.000 h electric driven /

Year of construction: 2021, Condition: ready for operation (used), Functionality: unexamined, Basic package Selector 800 Lower belt BB 1350 mm AA 6.4m -profiled belt- Dkjhxevm Upnsznp Rjl SPIRAL SHAFT SCREEN COVER AA254-150 - 16 shafts

Condition: used, Steep screw conveyor, screw tube stainless steel Djhxznpswbhqas Rekl Factory new screw helix mild steel, factory new bearing with plug screw With drainage area, screen approx. 2,5 mm perforation Motor 4,00 kW, 53 rpm Screw helix diameter 560 mm, length 7540 mm, clear length of screw tube 7570 mm Inlet 900 long x 740 mm wide Outlet 400 mm diameter Previously used for shredded plastic waste

Year of construction: 1996, Condition: reconditioned (used), No.: 2590k 1 used compounding-pelletizing line – output up to 1200 kg/h depending material, equipped with: Extruder Twin-screw THEYSOHN Type TSK 90 Screws 2x Ø 90 mm – 36 LD co-rotating intermeshing Segmented screws-and Cylinder, Water / Medium cooled Extruder Motor 255 kW-DC / Screw speed up to 300 r.p.m. 1x Side feeding extruder TSD 75 twin-screw with 3 kW Dkjhogbffvexznp Rsl 3x venting ports 1x Melt-Filter No. 1 type K –HS- Y sieve/Mesh 176 mm incl. Hydraulic Pack 1x Melt-Pump with motor 22 kW 1x Melt-Filter No. 2 type K-SWE 180 RS back-flush self-cleaning 1x Strand die-head with holes 32 x Ø3,5 mm 1x Strand cooling bath 620 x 5000 mm 1x Strand pelletizer SG 300 with 11 kW ResoTec Monitor control Board Inspection visit / demonstration shortly possible - date on appointment You´re welcome. More compounding pelletizing lines ex pour workshop available, > find our most-recent stock-list online on our homepage.

Year of construction: 2014, Condition: reconditioned (used), Screen with 3 fraction Fine fraction: 0/10...25 mm Middle fraction: 10...25/60...90 Dohxznpod H E Ias Rokl Coarse fraction: 60...90 mm Coarse fraction extended (mm): 90/120 / 64 kVA generator / possible in grid operation with 125A plug /

Condition: used, Dryer / centrifuge / dry cleaner Dohxznewbhppjp Rjkl Previously used for centrifugal drying of plastic waste. Throughput capacity 300 to 1000 kg/h depending on the type of plastic and wall thickness Drive power 30 kw

Condition: reconditioned (used), stock-No. 2452 1 used, partly overhauled and functionally tested pelletizing line capacity up to 500 kg/h depending material, equipped with: Kreyenborg Force-feeder SW 100, motor 7,5 kW Extruder BKG single-screw Ø 100 mm – 35 LD, motor 132 kW – AC Djhxzed Sg I Ienp Rokl Screw speed up 143 r.p.m. screw depth 14 mm heating power installed 35 kW 1x athm. venting port ( vacuum-pump optional ) Kreyenborg K-SWE 160 RS screen-pack-changer back-flush self-cleaning with filter surface 244 cm² BKG underwater pelletizing unit AH 300, complete with : diverter-valve , hydraulic unit pelletizer, motor 4 kW incl. die-plate and knife-holder Water pump 2,2 kW By-Pass System, Process water tank heating power 9 kW Heat-exchanger BKG pellet spin-dryer TWE 300 with motor 3 kW pellet classifier sieve control-board and Siemens Touch operation panel (updated ) OPTIONAL against additional price ᐳ * Vacuum pump ᐳ ,material feed conveying, Big-Bag filling Station ᐳ chiller – cooling unit More pelletizing lines ex workhop Wuppertal-Germany available, ask for our most recent machine-stock-list or visit us, you´re welcome.

Condition: good (used), Year of construction: 2018, operating hours: 4,620 h, Axtor 10 / machine number: 249037 / CAT C15 T4F Stage IV / 433 kW / 589 HP / Overbelt magnetic system / Radio remote control / Pre driving device / Shredding or chipping mode with free-swinging tools and chipper or shredder blades / Material: good for green waste, bark, round wood, slabs and waste wood / 2 drum speeds 460 / 810 rpm (modification for free swinging tools) / Drum width 1.543 mm / Drum diameter 1.108 mm / 32 knifes or tools / Weight: ca. 25 to / Feeding height: 2.800 mm / Screen baskets: 60x60, 80x80, 100x100, 125x125 ect. possible/ Screen baskets according to your wishes possible / Throughput depending on the material and feeding (operator) between 100 and 300 m3/h / Feeding hopper over 4 m long / noise emission: 122 dB (A) Djhxzsd N Hpnsnp Rekl weight: ca. 25.000kg Transport dimensions: length: 11.700mm width: 2.500mm height: 3750mm draw bar eye: 50mm

Condition: used, kW: 30 Rotor diameter: 500 mm Rotor width: 1200 mm Dshjwbhn Esxznp Rskl

Condition: reconditioned (used), No.: 2587k 1 used, functionally tested pelletizing-extrusion line, output approx. up to 600 kg/h depending materials, equipped with: 1 volumetric material blender ( Dosing unit ) Extruder Plastmachines Type PME 100 Single-screw Ø 100 mm – 35 L/D Motor 134 kW – DC 1x venting port Melt-Filter BKG Type K-SWE 121 RS – back-flush self-cleaning incl. Dkohxznpeiyy I No Rel Hydraulic pack 3 kW Strand die-head with holes 20 x Ø 3,5 mm Strand cooling bath 400 x 4000 mm incl. strand guiding rollers Strand blower Strand pelletizer SG 300 ResoTec Control cabinet Inspection visit shortly possible, date by appointment. More extrusion lines ex our Workshop / stock Wuppertal - Germany available.

Year of construction: 2021, operating hours: 988 h, Condition: like new (used), machine/vehicle number: 26236, diesel engine 55 kW / hopper volume 5 m3 / dimensions: L = 11.250 mm, W = 2.550 mm, H = 4.000 mm /simple drum change without tools / for all-purpose: compost, wood biomass, bark, sand, gravel, houshold and residual waste / weight: 16 t Djhxjh Ea Dkeznp Rskl

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw A total of four dryers of this model are available. Djhxzewbhnxonp Rjkl

Year of construction: 2023, Condition: new, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Dehxzsd Hqa Ijnp Rokl Visit us at our Wuppertal plant.

Condition: good (used), Year of construction: 2021, operating hours: 5,871 h, machine/vehicle number: 447202, CAT® C13 / Motor Tier 4 Final, Stage V / magnetic separator / Bio cutting unit / Radio remote control / pre-driving device / Material: good for green waste, root stocks and all kind of residual and waste wood / central lubrication / weight ca. 25 to / basket screens: possible 80 mm round, 100 x 100, 125 x 125 mm or 250 x 250 mm square or size at customer´s option / 1.900 rph / drum length: 2.820 mm / drum speed: 1. gear 22 rpm, 2. gear: 34 rpm Dohelbmmwjxznp Rokl

Condition: used, Year of construction: 2023, HERBOLD zigzag classifier (gravity classifier) Dkjhowbhnfsxznp Rol Type SZS 630/175 Sifting channel 630 mm wide With blower 7.5 kw Material: mild steel Condition: unused Year of construction 2023

Year of construction: 2023, Condition: new, We offer, successfully since more than 12 years, installed in all over EU, our new compounding extruders/lines : e.g. Type Alphatec AD-.S 75 with: Screw diameter 73 mm Segmented, Co-Rotating intermeshing, cylinder water / medium cooled Throughput performance up to 1000 kg/h - depending on the material Drive 132 kW - 250 kW L/D Ratio - according to processing needs Dshxznpsi Dtbqs Rjkl Degassing zones - as desired Side feeder type ZS-B - as desired OPTIONAL: > Melt filter/screen changer > Pelletizing systems: strand ST- , water ring WRG or Underwaterpelletizing UWP > Screw configuration according to your needs > Material dosing: volumetric or gravimetric > further accessories Visit us at our Wuppertal plant.