Condition: excellent (used), Year of construction: 2022, Functionality: fully functional, Technical data on the EPS (Polystyrene) press: Manufacturer FZ-Recycling GmbH & Co. KG, Germany Type FZR 320 Year of construction 12/2022 Drive power shredder 4 kW Drive power of compactor screw 7.5 kW Drive power hydraulic unit for the holding clamp in the press channel 1.1 kW Total connected load 12.6 kW Current consumption 32 A Compaction ratio of the compacted blocks to the original product approx. 50:1 (depending on material) Block weight after compaction approx. 300kg/m³ (depending on material) Block dimensions 320 x 320 mm, variable length Throughput approx. 100 kg/hour, depending on material Achievable density approx. 250 - 300 kg/m³ The pressed blocks are stacked approx. 1400 mm high on pallets and stretch-wrapped. Machine dimensions approx. 4,600 x 1,400 x 1,980 mm (l x w x h) Transport weight press 1,325 kg Condition of the baler: Djbvsu Thkajbd Tijkl The press was only used sporadically, is in very good condition and available at short notice. Due to the low weight of the machine and the forklift shoes in the transport frame, the press is mobile and can be used directly on the construction site where the material is produced. The electrical connection is made via a CEE 32 A plug. Scope of delivery for the baler: 1 piece EPS press, ready for connection and use Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: good (used), Manufacturer: MBT Djbvbd Tshzr U Ieiekl Tip: MV-250 S Motor: 5,5 kW hopper size: 780 x 600 mm Housing size: 3500 x 1000 x 2200 mm

Condition: excellent (used), Year of construction: 2000, operating hours: 3,700 h, Functionality: fully functional, total width: 2,500 mm, total length: 6,000 mm, number of blades: 2, overall weight: 22,000 kg, The Komptech Crambo 5000 shredder is in perfect condition. The Mercedes-Benz V8 engine is 435 PK/320 KW and has 2 turbos, making the machine more fuel efficient and powerful. The engine's working hours are 3700 hours. The machine includes documentation regarding the inspections and history of the shredder. Additionally included are the schematics of all parts in the shredder and the manual of the engine. Dkebvov T I Anjbd Tiol If there are additional questions or the wish to inspect the machine then feel welcome to contact us.

Year of construction: 2018, operating hours: 6,387 h, Condition: used, Type of fuel: Diesel Year of manufacture: 2018 Dobvev Uyhxjbd Tiskl Colour: Blue Field of application: Construction Drive: Track Empty weight: 24.000 kg CE mark: yes Terra Select T60. Year: 2018. Hours: 6387. Weight: 24.000 kg. CE Machine. Radio Remote Control. JCB engine. 2 way side belt. 2 way convenyor. Central greasing system. Pads: 400 mm. UC: 80%. 35x35 mm. ID NR: 125 C. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: good (used), Functionality: fully functional, power: 22 kW (29.91 HP), overall weight: 2,600 kg, Year of construction: 2006, Eric Schomberg ES 60/120 Shredder in good condition for sale year of manufacture: 2006 Cutter width 600 mm Cutter length 1200 mm Cutter shaft center distance 250 mm Cutter shaft speed approx. 16 rpm Cutter shaft torque approx. 17,000 Nm Filling hopper 1,200 mm x 2,400 mm Dkjbvbdstzbvyo Tiel Drive power 2 x 11 kW Total drive power 22 kW Weight 2,600 kg

Condition: excellent (used), Year of construction: 2015, Functionality: fully functional, pressing force: 60 t, input voltage: 400 V, bale weight: 550 kg, Used HSM V-Press 1160 Plus vertical press from 2015. The device is regularly serviced by an authorized service center. The press is fully functional and in very good technical and technical condition. Crushing force: 594 kN Voltage / required: 400 V / 50 Hz Width x height of the loading opening: 1195 x 650 mm Bale length x width x height: 1200 x 1100 x 1200 mm Width x height x height of the machine: 1780 x 1568 x 2985 mm Machine weight: 2403 kg Pressed material: foil, mixed paper, cardboard, cutting machine waste Freight costs depend on the weight, volume and above all on the distance, the following information is relevant for inquiries: Delivery address (postcode and name of the town), but further details require a telephone call, so we ask you to inquire about transport costs and other delivery modalities to contact us by phone. Dkjbewh Rdpovbd Tijl Our contact details can be found under the legal information of the seller. We sell and export worldwide, due to our very large storage capacity we can also deliver larger quantities flexibly and quickly. We issue intra-community invoices - excluding VAT. Opening hours Mon-Fri: 8 a.m.-4 p.m. sat .: closed

Condition: as good as new (ex-display), Year of construction: 2024, operating hours: 25 h, Functionality: fully functional, total height: 3,850 mm, total width: 2,060 mm, total length: 4,680 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 1,800 kg, power: 4 kW (5.44 HP), The TUKSTON Stone Trap was developed to offer cost-effective removal of foreign matter. The inclination, speed, and feed area can be continuously adjusted to achieve optimal separation efficiency. Simply combine your existing screening machine with TUKSTON and TUKWIND and separate foreign matter such as metals, stones, and plastic. The screening machine remains completely mobile and can therefore be easily moved for cleaning. Dsbvbswhkrtsd Tiokl Easy separation of: - Rollable foreign matter (stones) - Ferrous metals (optional magnetic roller with 2-20 kg pulling force) - Lightweight materials such as plastic film, wood chips, hard plastic, Styrofoam, etc. (optional TUKWIND wind sifter) A 16A CEE power connection with only 4 kW power is required for operation!

Year of construction: 2015, Condition: good (used), Output: 1200m3/h motor: 2.2 kW Debvbderlm Ebs Tiekl

Year of construction: 2024, operating hours: 100 h, Condition: used, Field of application: Construction Serial number: 5xxxx Please contact ATS Norway AS for more information Please provide reference number upon request: 19395 Specifications: - 2024 model - Hours: approx. 100 - Weight: 14,860 kg - Good lines - Comes with extra cloths - Undercarriage (see pictures) - Watch video - Ready for delivery Description: 2024 Portafill MR-5 sights with extra cloths. The cloths have a value of NOK 20,000. Only 75 hours. Dobvbd Tevgx Iujijkl Ready for delivery. Hours: 100 Total Weight: 14860

Year of construction: 2017, operating hours: 7,359 h, Condition: used, Type of fuel: Diesel Year of manufacture: 2017 Colour: Blue Field of application: Construction Drive: Track Empty weight: 28.000 kg CE mark: yes Terra Select T70. Dkjbvbdjv Uygbo Tisl Year: 2017. Hours: 7359. Weight: 28.000 kg. CE machine. Radio remote control. Central greasing system. JCB engine. Pads: 400 mm. UC: 80%. 2 way side belt. 2 way convenyor. 20x20 mm. ID NR: 285. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: good (used), Year of construction: 1994, Functionality: fully functional, Electromagnetic belt separator Steinert length: 1500mm width: 900mm Year of manufacture: 1994 Protection class of magnetic housing IP44 Magnet power 2,2 kW; Dksbvbd Tjvyuy Heiel Material flow rate 1.8 m/s; Drive power 2,2 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; weight: 2200kg

Condition: used, rotor length: 1,300 mm, power: 55 kW (74.78 HP), rotor flight circle: 370 mm, Inlet opening: 1,350 x 1,450 mm Rotor flight circle: 370 mm Dkjbjr T Ny Rsvbd Tiel Drive: 55 kW

Year of construction: 2004, Condition: excellent (used), Drive power: 250 kW Rotor length: 1600 mm Rotor diameter: 1200 mm New wear parts in 2024, new main engine bearings Underframe, hydraulic unit, Dsbvjuqyr Esbd Tijkl complete with control cabinet and control panel, top condition, ready for use Total weight approx. 18 t

Condition: refurbished (used), Functionality: fully functional, machine/vehicle number: 4054065, The following completely overhauled and ready-to-use compact system is for sale This self-cleaning separator WSPX 303TGP-71 is mainly used for the concentration of water-based coolants or the purification of washing liquids such as lye baths or dirty water / rainwater. The maximum hydraulic flow rate is 1500 l/h. The motor is a two-pole motor with 50 Hz at 2.2 kW. The drum has a speed of 9510 rpm at 69 dB (A). The control water consumption per discharge is 0.5 l/discharge. Sediment chamber volume approx. 0.63 liters. Discharge volume min 0.8 liter, max 0.9 liter. Separation takes place in the separator bowl which is driven by the electric motor via a flat belt. The separator can be used as a concentrator with a large heavy phase (e.g. water) and a small phase (e.g. oil) as well as the sludge phase. The separator can also be used as a cleaning separator ( clarifier ) with only the sludge separation. The system as such is a completely overhauled compact system. All functions are controlled via contactors and time relays. All pipes that come into contact with the product are made of stainless steel. This also applies to the feed pump (Speck), the air-controlled three-way valve (APV) and the two switchable pre-filters (AWH). The damped pressure gauges and the sight glass holders are also made of stainless steel. The sludge tank has a pump control and a suction pump for heavily contaminated waste water. An additional CIP pipe has been installed to prevent the pipes and separator from becoming contaminated. All pipes and filters are shut off with special flap valves. The pipes are formed welded. Dkjbvbd Tjqzxy Ueisl The compact unit stands on five feet for easier transportation and a better working height. A set of reel tools, documentation and wiring diagram are included.

Condition: used, Year of construction: 2010, Type of fuel: Diesel Year of manufacture: 2010 Field of application: Agriculture Dksbvbd Tjv Ux Udeiel Drive: Track Empty weight: 26.700 kg CE mark: yes Komptech Terminator 5000 S. Year: 2010. Weight: 26.700 kg. CE Machine. 328 KW Caterpillar engine. 2 way convenyor. Pads: 500 mm. UC: 80%. REPAIR OBJECT! ENGINE IS RUNNING! HYDRAULIC DOESNT WORK! ID NR: 310 E. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, Year of construction: 1995, Functionality: limited functionality, cutting force: 800 t, net weight: 190,000 kg, type of input current: three-phase, Arnold HS850 Scrap & Metal Presse Die Maschine befindet sich derzeit in transportbereitem Zustand. master cylinder cylinder force: 850 t press: 0.08m/s hold-down cylinder cylinder force: 100t / per cylinder feed cylinder: cylinder force:100t cover cylinder: cylinder force:100t main dimensions total length:16175mm total width:5200 total height: 6420 mm Dimensions: Passage width at the scissor stand: 800mm passage height at the scissor stand: 800mm total height: 6000mm weights: scissor stand with cutter bar: 60 ton feed device approx: 85 ton total weight: about 170 tons required amount of oil: 5200 liters Dksbvbsh T Dctod Tisl connection value of the machine: 220kw If you need more information. We are here to help! Please contact us using the contact form or give us a call Your ad has been automatically translated. Translation errors are possible.

Condition: used, rotor length: 1,000 mm, power: 15 kW (20.39 HP), rotor flight circle: 250 mm, Inlet opening: 1,050 x 1,200 mm Rotor flight circle: 250 mm Drive: 15 kW Dkjbsr T I Tlsvbd Tisl

Condition: ready for operation (used), Separator mounted on a stainless steel frame, with feed pump, discharge pump, sludge pump, circulation tank, stainless steel pipes and valve, wired with control box. For the purification of contaminated water. Large water phase, small light phase and dirt phase. No emptying machine !!! Must be opened for cleaning. Time: approx. 5 min. Ready for immediate use. Dkjbvbdjqzxzgo Tisl We are happy to answer further questions by e-mail!

Year of construction: 2014, operating hours: 2,838 h, Condition: used, Type of fuel: Diesel Year of manufacture: 2014 Colour: Orange Field of application: Construction Drive: Track Empty weight: 10.000 kg CE mark: yes Portafill 2000 CT. Year: 2014. Hours: 2838. Weight: 10.000 kg. CE machine. Deutz TCD 2011 engine. Double deck screener: - 100 mm. - 25x25 mm. UC: 80%. German machine! ID NR: 147. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices. Dkobvbd Tov Uwaroiel

Year of construction: 2007, Condition: excellent (used), Functionality: fully functional, Electromagnetic belt separator IFE MEL 1400 Dkjbopcf Etjvbd Tiel length: 3200mm width: 1200mm Year of manufacture: 2007 Protection class of magnetic housing IP65; Magnet power 7.55 kW; Material flow rate 1.8 m/s; Drive power 4 kW; Control voltage 230 V; Operating voltage 3x400 V; Frequency 50 Hz; cylinder diameter: 500mm Total weight: 6480 kg Adjusting the device belt and tension

Condition: used, Year of construction: 2018, operating hours: 7,273 h, power: 276 kW (375.26 HP), Type of fuel: Diesel Year of manufacture: 2018 Field of application: Agriculture Drive: Track Empty weight: 22.800 kg CE mark: yes Lindner Urraco 75 D. Year: 2018. Hours: 7273. Weight: 22.800 kg. CE machine. 276 KW Scania engine. Radio remote Control. Magnetbelt. 3 way convenyor. Tippable hopper. Ad Blue. Pads: 400 mm. Dsbsv Uv Rvsvbd Tiskl UC: 80%. ID NR: 253. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, Year of construction: 2018, operating hours: 6,586 h, power: 276 kW (375.26 HP), Type of fuel: Diesel Year of manufacture: 2018 Field of application: Agriculture Drive: Track Empty weight: 23.200 kg Dkobvsv Uv Rpebd Tiol CE mark: yes Lindner Urraco 75 DK. Year: 2018. Hours: 6586. Weight: 23.200 kg. CE machine. 276 KW Scania engine. Radio remote Control. Magnetbelt. 3 way convenyor. Tippable hopper. Ad Blue. Pads: 400 mm. UC: 80%. ID NR: 278. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Year of construction: 2020, operating hours: 286 h, Condition: used, Type of fuel: Diesel Year of manufacture: 2020 Debvbev Uvyked Tijkl Colour: Yellow Field of application: Construction Drive: Track Empty weight: 15.600 kg CE mark: yes Anaconda DF 410 Tracked Screener. Year: 2020. Hours: 286. Weight: 15.600 kg. CE Machine. Remote Control on cable. Pads: 300 mm. 2 way convenyor. 2 x Sidebelt. Double Deck Screener: Deck 1: 55x55 mm. Deck 2: 20x20 mm. UC: 90%. ID NR: 380. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, Year of construction: 2020, operating hours: 1,990 h, power: 129 kW (175.39 HP), Type of fuel: Diesel Year of manufacture: 2020 Colour: Orange Field of application: Agriculture Drive: Track Empty weight: 14.500 kg CE mark: yes Reference number: 70 Arjes Impaktor 250 EVO. Year: 2020. Hours: 1990. Weight: 14.500 kg. CE machine. Debvbd Tov Upxmeiekl Volvo Penta TAD 581 VE engine 129 KW. Tracks + Hooklift system. Belt. Radio Remote Control. Magnetbelt. German Machine! ID NR: 70. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.

Condition: used, Year of construction: 2012, operating hours: 2,685 h, power: 390 kW (530.25 HP), Type of fuel: Diesel Year of manufacture: 2012 Colour: White Field of application: Agriculture Debvbdsv Upk Ne Tiokl Drive: Wheel Empty weight: 33.000 kg CE mark: yes Reference number: 53 Metso M&J 4000. Year: 2012. Hours: - engine hours: 2685. - shaft hours: 2302. Weight: 33.000 kg. CE machine. 3 way convenyor. 390 KW Mercedes Benz V8 engine. ID NR: 53. The General Terms and Conditions of Heinhuis are applicable to all adverts, offers and quotations by Heinhuis, all agreements entered into by Heinhuis and the negotiations preceding them. By any form of response you accept the applicability of the General Terms and Conditions of Heinhuis and you declare that you have taken note of these General Terms and Conditions. Our prices are export netto prices.