Condition: used, Year of construction: 2010, operating hours: 9,100 h, Hello, I have for sale a Doppstadt AK 630 high-speed hammer shredder/chipper with a sieve from 2010. Mileage is 9,100 mth. The machine is in very good condition. I invite you to purchase. Dceljv Unq Ujiqm Sbeg

Condition: used, Year of construction: 2002, Functionality: fully functional, machine/vehicle number: 22924, Exhaust air dedusting system Dolov Scfusiqm Sbjcg You are welcome to visit us by appointment.

Condition: used, Year of construction: 2021, operating hours: 200 h, Functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Djliqmjvnq Trs Sbjcg Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Crushing system size L (8 teeth) Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running

Condition: used, The company sells SPE Renergi Low Temperature Dryer -The Renergi Dryer is used for drying of sawdust and other materials for production of biofuels. -The dryer can dry sawdust, bark or wood chips from a humidity level of about 50% to a level of approximately 10 %. This low-temperature dryer utilizes warm (or hot) water from a recommended temperature of 65°C and higher. Maximum water temperature - 110°C. -Power supply safety: The dryer must only be fed by 3x400 V AC (630 A) 50/60 Hz with a separate Protective Ground conductur. -Power supply Data: -Voltage 400 V AC, three phase -Recommended fuses in supply line: maximum 3x630 A -Typical power consumption: 200kW -The dimension of the Dryer are roughly 17,4 by 5,7 meters, with a height of 10,7 meters. The floor space required is approximately 21,4 by 8,0 meters. A ceiling height of at least 15 meters (or 4 meters above the top of the media inlet). -Air supply: at least 24 kg gas/s fresh air is required for the operation of this machine. This corresponds to 20nm3/s, or 72 000 nm3/h. -Airflow: max 200 liter/min -Air pressure: min 4,5 bar, recommended 6,0-8,0 bar -Water supply: hot water supply, with a flow of 32 dm3/s. -Water pressure: min 1.5 bar, max 6.0 bar -Operating temperature range: -Incoming air temperature: -20°C to 50°C -Relative humidity: 0% to 60% -Raw material/media: -Relative humidity: 45% to 55% by wieght -Requested relative humidity: 8% to 15% in the dried material -Capacity: -The dual-cell, 4 m wide dryer can typically handle 2400 kg of material with a moisture content of 55% by weight in each load -The dryer is capable of drying 6000 kg raw material, with a water content of 55% to 10% in approximately one hour. -SRE’s dryer is desinged in accordance with European directives. The equipment is designed to conform to the essential requirements of: -The Machinery Directive 2006/42/EC -LVD 2006/95/EC -EMC 2004/108/EC Dcslsrb A R Njiqm Sbsg -The dryer is located in Straupe parish, Cēsis district, LV-4152, Latvia. Available for viewing on working days, 08:00 to 17:00, by prior agreement on the viewing time. -The dryer is already dismantled -All electrical schematics, manual, operating instructions available -Upon request, we can provide a contact person with this type of working dryer for consultation

Condition: like new (used), Year of construction: 2023, operating hours: 185 h, Functionality: fully functional, machine/vehicle number: 910, warranty duration: 12 months, power: 140 kW (190.35 HP), Features: - Dust suppression - Raised filling area Dceliqm Sotwmnnobsg - Flat bottom plate on tracked chassis Application: Classification of pre-crushed waste wood (see German waste wood classes: A1-A4), mainly as a mixed fraction, with foreign matter - ideal for thermal recycling, with full flexibility in use. Density: 200 - 300 kg/m³, moisture: < 30 %, length: max. 500 mm

Year of construction: 2024, Condition: new, ZIGZAG air separators Application description: ZIGZAG type air separator is a device designed to purify materials in the waste recycling process. The separator separates light fractions from heavy fractions by pneumatic method. It works well with a wide range of waste materials of 0-150mm size. Air separators of this type are used for pre-ground, jagged or very fine materials. Thanks to our unique design, the separator has the ability to adjust at many points that are important for the purity of the received fractions. ZIGZAG type separators are used in many areas: weight classification of metal granules purification of shredded scrap from the light fraction (films, plastics, paper) removal of volatile fraction during recycling of WEEE purification of plastics, rubber purification of municipal waste, glass removal of dust Construction description: The ZIGZAG separator consists of individual components mounted on a common support structure. In the first part, the ZIGZAG module is installed. The module has an inspection hole and regulation of the material stream passage gap. In the second part there is a cyclone discharging the light fraction. Underneath the cyclone there is a variable speed sluice for ejection of separated materials. A fan with electronic speed control is located on top of the structure. The structure is designed in part for loading and unloading by conveyor belts. The separator has a control cabinet equipped with a safety system. Doleua D Alsiqm Sbjcg

Condition: used, HSM V-Press 605 waste paper baler - used The HSM baler is a compact device for reducing packaging waste by up to 95%. It is designed to compact and crush cardboard (paper sacks, waste paper, offcuts) and film (stretch film, plastic sacks). It enables them to be disposed of economically. The waste paper baler has a graphic text display informing of the machine's stage of operation and a large waste loading opening. All this contributes to the comfort of use of the baler and its easy intuitive operation. Advantages of the HSM V-Press 605 baler: - Compact size - contributes to space saving. Djliqm Sjwcpvaebecg - Crushing force of 57 kN (approx. 6 tonnes) - allows bales of up to 70 kg with dimensions of 80 x 60 x 60 cm to be formed. - Low noise level - 60.1 dB (A) - Material support claws - increases loading volume and therefore increases baling capacity. - Mechanical ejector - makes bale removal easier. - Large loading aperture - increases user comfort. - Quick and easy assembly. The offer concerns the HSM V-Press 605 waste paper baler: - Manufacturer: HSM - Product condition: used - Year of manufacture : 2018 - Model: V-Press 605 - Width: 119 cm - Depth: 81.5 cm - Height: 198 cm - Weight: 485 kg - Power: 1500 w - Voltage: 400 v Net price : €3499.00 each * I have large quantities, prices can be negotiated for larger orders. * Transport throughout Europe possible. * The above offer does not include transport costs. * Location: Chmielów/Tarnobrzeg, Poland.

Condition: excellent (used), Year of construction: 2015, operating hours: 289 h, Functionality: fully functional, tank capacity: 32,000 l, filling opening length: 1,320 mm, filling opening width: 1,700 mm, power: 15 kW (20.39 HP), usable tank capacity: 32,000 l, transport height: 2,600 mm, Hello, we are offering you, subject to change, a used wood screw compactor with primary crusher and front press container from the manufacturer Ludden & Mennekes Entsorgungs-Systeme GmbH, Germany, type SVS 15. The following technical data was taken from the manufacturer's operating instructions and brochures, for which we cannot guarantee their accuracy or completeness. Technical data for the screw compressor: Dimensions of the filling opening 1320 x 1700 x 1100 mm (W x D x H) Dimensions of the base body 2445 x 2492 x 1430 mm (W x D x H) Dimensions of the complete screw compressor 2445 x 2492 x 2530 mm (L x W x H) Diameter of the outlet opening 700 mm Height of the clamps 750 mm Speed of the screw min. 16 rpm. Diameter of the screw 500 - 750 mm Torque of the screw 8,400 Nm Throughput approx. 90 m³/hour Drive power 15 kW, with 63 A Cekon plug Technical data for the front press container: Manufacturer Ludden & Mennekes Entsorgungs-Systeme GmbH, Germany Type PCS 6500 Year of manufacture 2015 Front press container 6500 (7170) x 2500 x 2600 mm (L x W x H) Volume of front press container 32 m³ Front press container empty weight 3820 kg Permissible total weight of the front press container 15000 kg Dsliqm Sevza Dgebocg The machine documentation is available in German. A viewing is possible by appointment. We would be pleased if this machine is of interest to you. Your service team Mertens & Frowein GmbH

Condition: used, Year of construction: 2021, operating hours: 4,540 h, Functionality: unexamined, Equipment: Basic package Inventhor Type 9 MTU diesel engine 6R1300, 390 kW at 1,700 rpm meets EUROMOT V emissions standard Dcoliqovnmldjm Sbeg Additional hydraulic connection 30 l/min and 70 l/min Roller drive via planetary gear 380 kW – VARIO - Load sensing system Fuel tank 950 liters Longitudinal belt: belt length 4,450 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control Additional electric pump for operating the following functions when the engine is not running. Raise/lower/fold rear belt, open/close comb flap, open/close comb, raise/lower optional permanent magnet belt, raise/lower optional folding funnel Radio remote control complete Large side GRP maintenance doors Maintenance-friendly engine compartment with LED light Hydraulically reversible fan wheel Loading protection on both sides Fire extinguisher Maintenance ladder Tool box Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Special equipment: 500 mm chain chassis unit Chain chassis 500 mm flat Crushing system size "L" -VARIOMAT Size "L" - "Limiter" (20 pieces) Rear conveyor length 7 m 1200 mm wide LED light package engine compartment and rear Irrigation with funnel attachment H=300mm Frame for overband magnet Overband magnet 2 t permanent

Condition: excellent (used), Year of construction: 2005, Shreder twin-shaft machine ANDRITZ MeWa UC120 Machine after technical inspection. Dceliqm Ssquuryobog

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 8455, overall weight: 44,000 kg, rotor speed: 87 rpm, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-2 with 315 kW - Cutting system 116PR - PG190 screen (can be changed on customer request) - Feed chute - Dust suppression - Electrical central lubrication - Hydraulic safety guard - Overband magnetic separator Neodymium - HP Dolsugf Dwoiqm Sbscg - Rubberized bolted floor plates on tracked chassis

Condition: used, Year of construction: 2017, operating hours: 6,584 h, Functionality: unexamined, Equipment: Basic version DW 3060-F "Buffalo" (carrier machine) Central axle trailer chassis with 3 axles, 80 km/h road approval Braking system including ABS and lighting in accordance with EC directive 50 mm EC towing eye including slip-on shoe Hydraulically adjustable support leg Splash guard (inside and side fenders) Permissible total weight 25,000 kg Tires 385/65 R22.5 Dcoljvnmfqsiqm Sbsg Mercedes-Benz/MTU diesel engine 6R1300, 360 kW at 2,000 rpm, meets EUROMOT IV emissions standard Reinforced planetary gear 380 kW Additional hydraulic connection 20 l/min Hydraulic preparation for drive Fuel tank 2 x 300 liters Rear conveyor: conveyor length 5,500 mm, conveyor width 1,200 mm, hydraulically foldable, with anti-magnetic middle section Longitudinal belt: belt length 3,300 mm, belt width 1,000 mm Centrally arranged lubrication strips 24 V electric control Reversing of the roller using an electric motor when the engine is stopped Automatically reversible fan wheel Chassis with level control Acoustic start-up warning Doppstadt telematics system Paint: RAL2011 deep orange Additional equipment: Hydraulic drive SHREDDING SYSTEM SIZE "L" 600/4 KPL. Additional hydraulic connection 70 l/min Radio remote control Comb extension size "L" limiter Mounting comb extension limiter size "L" Overband magnet for rear belt Frame for overband magnet Moistening device

Condition: refurbished (used), Year of construction: 2007, The shredder is intended for stationary use in recycling plants. The machine can work inside plants, in halls, industrial buildings, in specially prepared facilities under a roof, but it is also adapted to work outside. Input material: The machine is adapted to granulate: • pre-sorted household and industrial waste, • paper and cardboard, • textiles, • foils, plastics and other materials with high calorific value, suitable for the production of alternative fuels, • wood and wood-like waste, • shredded passenger and truck tires and rubber waste, • cables and electrical bundles, • steel and aluminum chips from milling, • oil filters, • electrical and electronic waste, small motors and transformers Manufacturer's catalog data: - specific gravity of the light fraction 2125 kg/m³, - specific gravity of the input fraction 2350 kg/m³, - humidity 8-12% (max. 25%) The UNI-CUT UG 2008 MSL universal granulator is able to process a single, unhardened metal with a maximum cutting surface of 625 mm². This corresponds, among others, to materials: 25 × 25 mm iron bar or 3 mm thick sheet metal with a cutting length of 200 mm. Efficiency: Approx. 1.0 - 18.00 t/h The given values are indicative because they are influenced by many factors: - type and quality of waste and its bulk density, - content of mineral and metal fraction, - granulating sieve and its hole diameter (grain size from 10mm to 150mm is determined by the perforation of the replaceable sieve under the cutting mechanism of the granulator) - method of dosing the material, - proper service and operation of cutting knives Technical data: Technical Specifications: Manufacturer ANDRITZ MeWa GmbH Type/model UNI-CUT UG 2008 MSL Serial numer ……… Doliqm Selpckgobocg Year of manufacture 2007 Gross weight 28,900 kg Color to choose from the RAL palette Power supply Rated voltage 400V Electricity type 3/PE, 50Hz Rated power 220 kW (2 x 110 kW) Rated electricity 562 A Dimensions: Granulator height +- 4800 mm height with extended clamp +- 6580 mm width +- 2900mm length +- 5000mm The exact dimensions of the machine are available with technical drawings for those interested.

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: 8241, overall weight: 11,700 kg, rotor speed: 105 rpm, rotor length: 1,525 mm, power: 110 kW (149.56 HP), warranty duration: 12 months, Features: Delijtzll Seqm Sbscg - installed screen: SK60 (can be modified on customer request) - Feed chute - Wear protection carapace armoring - Rotor cooling preparation (connections) - Hydraulic oil cooling up to +45°C - Hydraulic protection fuse - Bus connection to external control system Application: Pre-shredding of plastics, ideal for feeding plastic recycling plant / sorting plant, hard plastics

Condition: good (used), Year of construction: 2020, operating hours: 590 h, Functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-link Additional hydraulic connection 70 l/min 24 V electric control Doliqovnq Rkem Sbecg Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with position sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Rubber quick-change pad Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 8172, total length: 8,000 mm, total width: 2,550 mm, total height: 3,200 mm, warranty duration: 12 months, power: 250 kW (339.91 HP), Features: - built-in cutting unit SR-8.8 scrap+ASK+NBB SR tines - Side elevation cutting chamber +300mm (1-piece) - Lateral elevation tilting hopper +300mm (1-piece) - Overband magnetic separator Neodymium - HP - Dust suppression Dceliqm Sjtwwf Debeg - Belt speed control

Condition: good (used), Year of construction: 2020, operating hours: 881 h, Functionality: unexamined, Equipment: Methor chain basic package Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min Dcelisvnmmzsqm Sbog 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding funnel with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Fuel tank 300 liters Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the roller Irrigation LED work lighting Additional electric pump for operation when the engine is not running Fire extinguisher GN 9 A-3 DIN EN 3

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 8330, total length: 7,000 mm, total width: 2,530 mm, total height: 2,900 mm, overall weight: 18,500 kg, warranty duration: 24 months, rotational speed (max.): 28 rpm, rotational speed (min.): 10 rpm, power: 257 kW (349.42 HP), - URRACO 75D-3 - Cutting unit HW-6.7 + scraper comb + smooth secondary breaker bar - Overbelt magnetic separator - Dust suppression Dcoliqsugf U Nem Sbjg - Wheel axle and drawbar - Belt speed control

Condition: good (used), Year of construction: 2021, operating hours: 2,954 h, Functionality: unexamined, Equipment: Basic package AK 640 SA Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm Semi-trailer chassis with 3 axles, 80 km/h road approval Braking system including ABS and lighting in accordance with EC directive Tires 385/65 R22.5 Permissible total weight 32,000 kg Hydraulically adjustable support feet Splash guard (inside fender and side) Mercedes / MTU diesel engine 6R1500, 480 kW at 2,000 rpm meets EUROMOT V emissions standard Additional hydraulic connection 20 l/min Load-dependent control of material feed including automatic scraper floor reversing Separate drive of feed roller and scraper floor (twin drive) Fuel tank 2 x 450 Liter Feed roller: length 1,690 mm, diameter 510 mm, with attached tooth segments Four-row flail drum with 36 freely swinging cast steel flail holders and replaceable flail tips Standard: flail tip Streusel plus Baffle plate with teeth Centrally arranged lubrication strips Electric pump for operating the cylinder functions (e.g. Raise/lower support feet and open/close rear basket, fold/unfold rear conveyor, release drive) when the engine is stopped 24-V electric control Separate control box at the rear of the machine Hydraulically foldable fine shredding basket Multimesh (mesh size between 30 - 280 mm, gradation on request) including 1-part rear flap Rear conveyor: conveyor length 7,500 mm, conveyor width 1,500 mm, discharge height 5,200 mm hydraulically foldable and lowerable from 39 degrees to 30 degrees, including anti-magnetic middle section Lower conveyor: conveyor length 3,800 mm, conveyor width 1,400 mm Moistening device for external water connection Scraper floor with 71 strips Wear protection in the drum area Reinforcement plates on the filling funnel (made of wear-resistant steel) on both sides for Side wall Radio remote control complete Fire extinguisher Deliqevna Dasm Sbocg Acoustic start-up warning Doppstadt telematics system Paint: RAL 2011 deep orange Additional equipment: Hydraulic drive Scraper floor chain lubrication NEODYM overband magnet Frame for overband magnet Central lubrication Engine compartment protection plate Light package: engine compartment and rear conveyor

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 8348, warranty duration: 12 months, power: 257 kW (349.42 HP), Features: - built-in cutting unit HW-6.7 scrap + ASK scrap + NBB smooth - Overband magnetic separator - belt speed control - Dust suppression Dcsliqmotwwa Ue Sbog Area of application: Light scrap

Condition: ready for operation (used), Year of construction: 2021, operating hours: 500 h, Functionality: unexamined, Basic package Methor chain - Crawler chassis including 2 driving speeds - Chassis chain 400mm 3-bar - Additional hydraulic connection 70 l/min - 24-V electric control - Large radio remote control complete - Maintenance-friendly engine compartment with LED light - Folding hopper with path sensor and automatic control Dsliqm Ssvnah Ssbjcg - Hydraulically reversible fan wheel - Acoustic start-up warning - Paint finish: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Crushing system size L (8 teeth) Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on machine Additional electric pump for operation when the engine is not running

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: 8461, overall weight: 44,000 kg, rotor length: 2,800 mm, power: 315 kW (428.28 HP), rotational speed (max.): 87 rpm, - MERAK 2800-1 with 315 kW -Cutting system 172RP5 - Screen SK100 (can be changed on customer request) - Feed chute Dcoljugf H Eoiqm Sbjg - Dust suppression - Electrical central lubrication - Hydraulic safety guard - Overbelt magnetic separator Neodymium - HP - Flat bottom plate on tracked chassis

Condition: ready for operation (used), Year of construction: 2022, operating hours: 207 h, Functionality: unexamined, Basic package Methor chain Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Dcoliqmjvm U Tgs Sbjg Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Paint: RAL 2011 deep orange Special equipment: Crushing system size L (8 teeth) Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Frame for overband magnet Overband magnet Roller quick-change system on the roller Roller quick-change system on the machine Irrigation LED work lighting

Condition: used, Year of construction: 2021, operating hours: 5,300 h, Functionality: fully functional, overall weight: 35,000 kg, rotor diameter: 800 mm, rotor length: 3,200 mm, power: 310 kW (421.48 HP), rotational speed (max.): 100 rpm, rotational speed (min.): 20 rpm, If you are interested, just ask! Dcsliovt Suheqm Sbjg

Condition: used, Year of construction: 2021, operating hours: 1,345 h, Functionality: unexamined, Basic package Methor chain Track chassis including 2 driving speeds Chain 400mm 3-bar Additional hydraulic connection 70 l/min 24-V electric control Large radio remote control complete Maintenance-friendly engine compartment with LED light Folding hopper with path sensor and automatic control Hydraulically reversible fan wheel Acoustic start-up warning Dsliqjvm Uzdom Sbocg Paint: RAL 2011 deep orange Additional equipment: Engine Cat C7.1, 205 kW Rear conveyor 6.9 m Irrigation Crushing system size M (26 teeth) Roller quick-change system on the roller Roller quick-change system on the machine Frame for overband magnet Overband magnet