Condition: new, Year of construction: 2026, Machine with special rotor Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm Chsdpfx Abedv Eu Hored hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Condition: ready for operation (used), Year of construction: 2006, functionality: fully functional, total length: 6,500 mm, overall weight: 18,000 kg, rotor length: 1,700 mm, Crushing plant, twin-shaft shredder, slow-speed model, Drive: electro-hydraulic, electric motor 200 kW, Hydraulic unit with control cabinet and operator panel, Chedpfxozv U Ifo Abred 2 brand-new rotor shaft bearings and labyrinth seals on the drive side. Discharge conveyor belt recently replaced.

Condition: ready for operation (used), Year of construction: 2018, functionality: fully functional, machine/vehicle number: 600-797, overall weight: 1,000 kg, filling opening length: 93 mm, filling opening width: 385 mm, roll width: 400 mm, rotational speed (max.): 1,770 rpm, TECHNICAL DETAILS Roller width: 400 mm Rotational speed: 1,770 rpm Infeed opening width: 385 mm Infeed opening length: 93 mm Number of axles: 2 Codpfjzuwu Esx Abrehd Number of fixed blades: 18 Screen perforation: 20 mm MACHINE DETAILS Main motor power: 22.2 kW Dimensions & Weight Dimensions (L x W x H): 2,400 x 1,200 x 1,000 mm Unladen weight: 1,000 kg Number of transport packages: 1

Condition: used, Year of construction: 2006, Doppstadt DW 3060 E Büffel – Electric Shredder We are offering the following used Doppstadt shredder for sale: Technical data and equipment: Manufacturer / Model: Doppstadt DW 3060 E Büffel Year of manufacture: 2006 Drive: Electric motor, 315 kW Roller configuration: 21 teeth Control cabinet Lower conveyor belt Side conveyor belt, 9m Remote control Feed hopper with extension Cedpjz Ntcgefx Abrehd Dismantling and loading: The machine will be dismantled and loaded. If you are interested, we will be happy to provide you with further information, photos, or arrange a viewing.

Year of construction: 2026, condition: new, Screen drums – highest quality across Europe – compatible with all common screening machines We offer screen drums in top European quality, suitable for the following models: Doppstadt SM 314 / SM 414 / SM 518 / SM 618 / SM 620 / SM 720 / SM 725, Cedjz Rfz Rjpfx Abrohd Terra Select T4 – T7, Komptech Maxx, Mustang, Nemus, Cribus, Pronar, Terex, Neuenhauser, and many other types. Technical features & designs Manufactured according to your individual specifications Perforation: variable, round or square Arrangement: staggered or straight Minimal webs for maximum screening performance Welded-in spiral for optimal material transport Various material thicknesses available Sharp-edged perforated sheets made from high-grade special steel Your benefits Top quality throughout Europe Many models available immediately from stock Delivery within Germany (EU-wide delivery on request) Short lead times and fair prices Contact us for your individual offer!

Condition: used, Year of construction: 2013, operating hours: 30,000 h, functionality: fully functional, overall weight: 9,500 kg, rotor diameter: 446 mm, number of blades: 36, total length: 2,990 mm, total height: 2,100 mm, total width: 2,250 mm, rotor length: 1,560 mm, power: 132 kW (179.47 HP), rotational speed (max.): 1,485 rpm, Redoma RC 130 – Single-shaft pre-shredder, rotor 1560mm, used and in working condition For sale is a Redoma RC 130 single-shaft pre-shredder in used, but functional condition. The machine is suitable for pre-shredding various materials in industrial and commercial applications. Scope of delivery: Redoma RC 130 single-shaft pre-shredder Associated control cabinet Various spare parts The machine is sold in used, functional condition. Ideal for companies looking for a used pre-shredding system or wishing to expand their existing machinery. If you are interested or have any further questions, please do not hesitate to contact us. Chodpfx Aboz N Ev Sjrod

Condition: new, Year of construction: 2026, HIGH-QUALITY SCREENING DRUM – OPTIMIZED DESIGN Suitable for Doppstadt SM 620 / SM 518 and Komptech Nemus 620 Robust construction – optimized hole geometry – high screening performance Are you looking for a powerful and durable screening drum for professional use? Our screening drum has been structurally optimized to combine high stability, reliable material flow, and the lowest possible tendency to clog. Suitable for processing: Compost Topsoil Biomass Wood and organic materials other bulk materials – depending on the selected hole size ----- WHAT MAKES THIS SCREENING DRUM SPECIAL? Trapezoidal hole design – 18 to 21 mm The openings are laser-cut in a trapezoidal shape and widen from approximately 18 mm to 21 mm. Due to this special geometry, material components that become lodged in the opening during the screening process can more easily exit. The result: ➡️ fewer clogged openings ➡️ reliable material flow ➡️ uniform screening process. As a result, the drum is not only designed for the largest possible screening area but also for the stresses of daily professional use. ----- Cedpfez N Al Rjx Abrehd A special structural advantage: Reinforced screw conveyor In the area of the screw conveyor, there are no openings on either side for approximately 15–30 mm. This keeps the highly stressed area closed and provides greater material stability. ➡️ higher load-bearing capacity ➡️ less weakening of the material ➡️ robust design of the screw conveyor ➡️ designed for demanding continuous use Rectangular alignment of the holes in the direction of material flow This ensures that the material is guided in a controlled manner across the screening area, and the available screening area is used efficiently. ----- YOUR ADVANTAGES ✅ Optimized screening performance ✅ Lower tendency to clog ✅ Uniform material flow ✅ Large open screening area ✅ High mechanical stability ✅ Reinforced screw conveyor ✅ Robust and durable construction ✅ Professional manufacturing ✅ Suitable for demanding recycling and processing operations ----- We specialize in the manufacture of metal assemblies, screening drums, and components for machinery and recycling technology. If you have any questions about the right drum, design, or hole size, we will be happy to assist you. SUITABLE FOR Doppstadt SM 620 SM 518 Komptech Nemus 620 QUALITY FROM PROFESSIONAL MANUFACTURING The result is a robust screening drum for users who value performance, service life, and reliable operation. ----- INDIVIDUAL HOLE DESIGN POSSIBLE Depending on the application, different hole sizes or mesh widths may be of interest. Do you need a different hole size or a special design? Please contact us. We will be happy to check the suitable design for your application. MANUFACTURER RKS Metallverarbeitung GmbH, 48336 Sassenberg

Condition: used, Year of construction: 2004, functionality: fully functional, pressing force: 59 t, filling opening width: 1,190 mm, filling opening length: 600 mm, bale length: 1,200 mm, bale width: 730 mm, bale height: 1,100 mm, bale weight: 500 kg, total width: 1,047 mm, total height: 3,079 mm, total length: 1,850 mm, type of input current: three-phase, input voltage: 400 V, overall weight: 2,300 kg, input frequency: 50 Hz, Strautmann PP 1207 Plus Baler – Year of manufacture 2004 Used vertical baler, Strautmann PP 1207 Plus, for the efficient compaction of cardboard, paper, film and other suitable recyclable materials. Technical data: Manufacturer: Strautmann Model: PP 1207 Plus Year of manufacture: 2004 Pressing force: 580 kN / approx. 59 tons Motor power: 4 kW Power supply: 400 V / 50 Hz Bale dimensions: approx. 1,200 x 1,100 x 730 mm Bale weight: approx. 400–500 kg, depending on the material Feed opening: approx. 1,190 x 600 mm Machine weight: approx. 2,300 kg Dimensions: approx. 1,850 x 1,047 x 3,079 mm (L x W x H) Transport height: approx. 2,170 mm Noise level: below 80 dB(A) The machine is suitable for volume reduction and compaction of cardboard, paper and film. Csdpfoz Ht Ezex Abrshd For transport, the machine can be partially disassembled. The hydraulic ram must then be reassembled professionally. Inspection possible by appointment. All information without guarantee. Subject to prior sale.

Condition: used, Slow-speed pre-shredder for rubber, plastic, cables, composite materials Well-suited for material composite separation, e.g. tires, scrap cables With integrated safety shear coupling for protection against foreign objects Csdpfx Absz Hxirjrjhd Rotor: 600 mm diameter x 1450 mm working width Enclosed rotor with staggered segment knives, mounted on cassettes 24 rotor knives, 2 stator knife rows Swiveling screen basket, perforation as required With feed device (pendulum arm) Drive power: 90–200 kW

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Cjdpfx Abez Hxixorehd Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Drive motor 11 kW (on request max. 30 kW)

Condition: used, Cutting mill for high loads (heavy duty) Cedpfx Aoz Hxmwobrehd Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Year of construction: 2015, operating hours: 6,000 h, condition: like new (used), functionality: fully functional, machine/vehicle number: 1448380811, Set including: Chsdpjz Icw Aefx Abrod Centrifuge Hydraulic unit 2 feed pumps 1 flocculant pump 1 flocculant preparation tank 1 electrical control panel

Condition: used, Year of construction: 2017, operating hours: 3,706 h, overall weight: 20,000 kg, Doppstadt DW 2060K Biopower - Year of manufacture: 2017 - Engine: Mercedes-Benz OM 926 LA / 326 hp - AD BLUE system - Weight: 20,000 kg - Remote control - Humidification system - Rear conveyor belt, 5 m - Overband magnet - Tracked chassis - Roller: 2000 mm x 600 mm Chsdpoz Idb Nofx Abrod - Teeth: 24

Condition: excellent (used), X-ray sorting system. Manufacturer: TITECH TOMRA Model: X-TRACT 1200 Year: 2012 The machine is in very good condition. Complete machine overhaul carried out. Source renewed: €35,000 All sensors replaced: €29,000 Belt replaced. Areas of application: - Metal sorting - Sorting of wood, production of refuse-derived fuels (RDF) - Sorting of organic waste Chjdpfx Abey Ra D Rorjd

Condition: new, functionality: fully functional, Year of construction: 2022, Wearing parts SPECIAL OFFER for e.g. SBM 10/10/4 SM, consisting of: 1 pc. grinding plate 160790 Cedpfxoy Au Ihe Abrshd 4 pcs. spreader segment (2 x right / 2 x left) 05628 4 pcs. spreader segment (2 x right / 2 x left) 05629

Year of construction: 2013, operating hours: 25,254 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: S40302, TOMRA AUTOSORT 4 optical sorting system equipped with VIS/NIR technology for the automatic separation of materials based on polymer and/or color. • Working width: 2,000 mm • Hour counter: 25,254 hours • Condition: operational until December 2025 • Current status: disassembled and available for inspection The hour counter indicates 25,254 hours, although a significant portion of these corresponds to periods in standby mode, meaning the actual operating hours of the scanner are lower. Cedpfezbtvtex Abrohd Suitable for sorting plastics and other materials using VIS/NIR identification, enabling separation by polymer type and by color.

Condition: used, machine/vehicle number: 14038, Rotor diameter: 260 mm Chedpjyr Tzdsfx Abrod Rotor width: 260 mm Number of rotor blades: 3 Number of stator blades: 2 Inlet cross-section: approx. 350 x 550 mm Drive motor: 7.5 kW

Condition: ready for operation (used), Crushing force: approx. 700 kN (approx. 70 tons) Engine power: approx. 11 kW Power supply: 3 × 400 V / 50 Hz Chsdpfx Aera Dddobrod Weight of a single bale: up to approx. 600 kg Bale dimensions: approx. 1100 × 1100 × 1200 mm Machine dimensions: approx. 5.9 m long, 2.5 m wide, approx. 2.6 m high Machine weight: approx. 7 tons Cycle time: approx. 45–47 s Design features: large opening for loading cardboard option for automatic feeding (e.g., with a conveyor) manual wire binding (4 wires) pallet locking and hydraulic door for bale removal Advantages of this press: large bales = fewer transport trips high crushing force designed for continuous operation Available production years: 2017-2018

Condition: used, The lot consists of: (1) 5 m3 buffer tank FV310T; Foras; 2.2 kW; 3 x 400 V; 200-900 l/min (1) Flocculant mixing system CHU-F 0.5; Vodatech; Serial No. 683; 2014; 0.5 m3 solution tank; 1 m3 storage tank Chjdpe Ahhqbefx Abred (1) Chemical dosing pumps TR 63B4; Bonani; Acid and coagulant dosing pumps (1) Air blower 1015; Vodatech; Serial No. 014-14; 2014; Max. 6 bar; operating temperature 40°C (1) DAF wastewater flotation unit UF-60; Vodatech; 2014; 15 m3; 15.25 kW; approx. 5.7 x 2.9 x 2.8 m; 2,600 kg empty / 17,600 kg filled

Condition: used, Year of construction: 2015, The lot consists of: Regrind dryer SCR-2500U-CE SHINI; S/N 2CR14080001; 2014; 2,500 kg capacity; 128 kW heating; 15/17.2 kW blower; 2,790 kg Gravimetric feeder DBW-G1-350N-100 Brabender; max. pressure 2 mbar; 230/400 V; < 70 dB(A) Extruder drive motor ELIN MKH831C04 Elin Motoren; S/N 50667613001; 277 kW; 300-1,960 rpm; approx. 1,400 kg DESCH clutch PPF-142RA1-Kado08E2 Extricom; S/N 13063840; 180 kg; release torque 2,022 Nm; max. 2,500 rpm Gearbox RE5XP PGL41,5 Eisenbeiss; S/N W_K 706419/10/1; 2013; 255 kW; 1,961 rpm input / 400 rpm output; 200 l oil capacity; 2,750 kg 12-screw extruder with vacuum system Extricom; 2015; RE5 XPV-28D; 5,360 x 1,380 x 2,410 mm; 3 x 400 V; max. 400 A; 8,500 kg (technical details – download PDF in "Essential information") Melt pump GPE 90/90-03 Nordson; S/N 26837/B; 2014; 66.3 kW Continuous screen changer K-SWE180-4K/RS Nordson; S/N 26837/d; 2014; 1,500 kg/h; max. 500 bar; max. 300 C Underwater pelletizer PoDV 6 TM Gala; S/N 11430294; 2015; 740 kg Vibrating crystallizer WR 16/6-DV Vibrotechnik; S/N 5818001; 2014; 1,900 mm length; 1,600 mm diameter Bagging unit Double/Small/P R&K; S/N 100004/2014; approx. 3,153 x 1,800 x 3,180 mm Extrusion control cabinet MX Multi-Eco 4V315-S1136 Schneider Electric; S/N 1411738; control cabinet Csdpo Ahhwdefx Abrehd Technical Details: 2,500 kg capacity; 128 kW heating; 15/17.2 kW blower; 2,790 kg

Condition: used, functionality: fully functional, overall weight: 2,800 kg, total length: 2,750 mm, total width: 1,500 mm, total height: 1,800 mm, input voltage: 400 V, rotor diameter: 730 mm, rotor width: 600 mm, Hammer mill with swing hammers for secondary size reduction of cable scrap, aluminium, e-scrap and non-ferrous metals. Technical data: – Rotor: hammer circle diameter approx. 730 mm, width 600 mm, rotor discs Ø 520 mm – Hammers: plate type 215 × 100 × 13 mm, bore 35 mm – Screen: replaceable perforated screen, one fitted – Drive: V-belt, ABB motor frame 225 (approx. 37–45 kW), 400 V / 50 Hz – Electrics completely renewed, new control cabinet included – Hinged upper housing – Dimensions approx. 2,750 × 1,500 × 1,800 mm incl. motor and hopper, weight approx. 2,800 kg Scope of delivery: mill with motor, belt guard and control cabinet; new complete wear part set (hammers, pins, spacer rings, unused); discharge belt conveyor with gear motor. Chedpfxez I I Hvs Abrsd Nameplate missing, manufacturer unknown. The machine runs without problems. Inspection and test run by appointment on site (Cheb, Czech Republic). Loading onto truck on site. Sold as is, price net plus VAT.

Condition: good (used), Year of construction: 2020, functionality: fully functional, Horizontal baler Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2020 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2020 Drive power: 11 kW, 400 V / 21 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Press cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 4-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Machine weight: approx. 8,000 kg Chedpoz A Ty Djfx Abrjd Materials: Paper, cardboard, film Note: The baler is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. This offer is subject to change, prior sale, and can be revoked at any time. Inspections are possible by appointment. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2016, operating hours: 1,030 h, functionality: fully functional, Horizontal baling press Dixi 80 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2016 Manufacturer: Dixi Type: Dixi 80 SLD Year of manufacture: 2016 Operating hours: 1030 Drive power: 11 kW, 400 V / 23 A Feed opening: 1,040 x 1,110 mm (W x L) Pressing force: 80 t Pressing cycle: approx. 35 s Capacity: approx. 1000 kg/h Bale size: 1,120 x 1,120 x 1,200 mm (W x H x L) Bale weight: approx. 500-600 kg Tying: 3-strand, manual Machine dimensions: approx. 4,320 x 1,830 x 2,620 mm (L x W x H) Chodpfxsz A Tzbs Abrod Machine weight: approx. 8,000 kg Materials: Paper, cardboard, film Note: The press is in very good condition. It has been inspected and tested by us in 28816 Stuhr. You can find the video on our website or our YouTube channel. The hydraulic hoses should be replaced. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or any errors. The offer is non-binding, subject to prior sale, and may be revoked at any time. Inspections are possible by arrangement. The sale is made against advance payment, ex works, without warranty.

Condition: good (used), Year of construction: 2012, functionality: fully functional, Horizontal baling press Dixi 60 SLD, with lifting/tilting device, semi-automatic, year of manufacture 2012 Manufacturer: Dixi Type: Dixi 60 SLD Year of manufacture: 2012 Drive power: 7.5 kW, 400 V / 16.5 A Csdoz A T Dcjpfx Abrshd Feed opening: 990 x 1,110 mm (W x L) Pressing force: 60 t Pressing cycle: approx. 47 s Bale size: 800 x 1,100 x 1,200 mm (W x H x L) Bale weight: approx. 370-410 kg Tying: 3-fold, manual Machine dimensions: approx. 4,150 x 1,725 x 2,035 mm (L x W x H) Machine weight: approx. 5,420 kg Material: Paper, cardboard, film Note: The press is in good condition. It has been inspected and tested. A video can be found on our website or YouTube channel. An operating manual is available. Please note: All technical data refer to the manufacturer's specifications. We assume no liability for the information provided or for any errors. The offer is non-binding, subject to prior sale and can be revoked at any time. Inspections are possible by arrangement. The sale is made against prepayment, ex works, without warranty.

Condition: reconditioned (used), functionality: fully functional, screw conveyor diameter: 65 mm, Stock No. 2845 1 used, overhauled, and functionally tested compounding and granulation line, ADS-STS Coperion 65 – Throughput up to approx. 400 kg/h – Material-dependent, consisting of: Volumetric material dosing twin-screw extruder, 2 x Ø 50 mm, drive 1.1 kW Twin-screw extruder / compounder – Co-rotating Screws 2x Ø 65 mm – 40 L/D, segmented screws and cylinder (water-cooled) Screw speed up to 600 rpm, extruder drive 90 kW – AC adjustable 2x degassing zones, 1x with vacuum pump 1.5 kW and condensate separator 1x side-fed twin-screw extruder ZSB, 2x Ø 35 mm, drive 0.75 kW Screen changer, screen area 125x70 mm with hydraulics 1.5 kW Die head with flanged connection, holes 13 x Ø 3.2 mm Codsz A Sz Hepfx Abrshd Strand cooling tank, stainless steel, L 4000 mm x W 350 mm Strand granulator SG 100, drive 3 kW Control cabinet with relay control, ABB frequency inverter. Gravimetric dosing system OPTIONAL, available at an extra charge. Test run with your material possible in the short term, appointment by arrangement at our Wuppertal plant. We have other compounding lines and accessories in stock and ready for delivery.