Condition: ready for operation (used), Year of construction: 2010, Working width: 1600mm, infeed cross-section X/Y: 1600mm/2300mm, main drive: 75kW, 1500rpm, rotor flight circle: 600mm, rotor speed: approx. 85rpm, number of cutting tools: 42, screen design: perforation 40mm. Dimensions X/Y/Z: 5015mm/2650mm/2935mm, weight: approx. 14000kg. Documentation available. Dobvctnetpp Hpjnscg

Year of construction: 2023, Condition: new, Functionality: fully functional, This machine, type KM13, cuts electrical cables from 20 to 120 mm in diameter. The different diameters are easily adjusted by turning the hand wheel up and down. The machine has a speed of 25 mtr/min. The dimensions are: length 600 mm, width 600 mm and height 1600 mm. The weight of this machine is about 200 kg. This machine is powered by a 380V-50HZ, 3KW electric motor with a gearbox cabinet. The cable is cut from 2 sides so the copper core falls out easily. Debvctnoq E Ti Honjcg Spare parts such as blades, drive, bearings etc can also be supplied. If required we can also perform maintenance on these machines A machine that is ready to use and easy to operate. If you want to try it, please bring cable.

Condition: ready for operation (used), Year of construction: 2008, operating hours: 23,200 h, Functionality: fully functional, machine/vehicle number: MH 3729, cutting force: 800 t, power: 300 kW (407.89 HP), net weight: 120,000 kg, Very fast and high-throughput machine Dcobvcev Ditvjtnneg TECHNICAL DETAILS Cutting force: 800 t / 7,740 kN Cutting width: 950 mm Cutting height: 650 mm Rammer force: 90 t Number of shear strokes: 4 - 5 1/min Throughput for mixed scrap: 15 - 30 t/h Filling bed length: 7,100 mm Filling bed width: 2,400 mm Width of the closed filling bed: 880 mm Height of the closed filling bed: 600 mm Side cylinders per cover: 3 pieces Maximum cover force (per cover): 300 t / 3,000 kN Feed force: 160 t / 1,600 kN Oil tank: 6,000 l Maximum working pressure: 360 bar Control: PLC Main motors: 4 x 75 kW Motor for pilot pump: 1 x 4 kW Motors for cooling circuit: 1 x 5.5 kW Motors for cooling fan drive: 2 x 1.1 kW MACHINE DETAILS Overall length: 18,500 mm Overall width: 3,300 mm Dimensions of cabin: 1.5 x 1.5 m Weight: approx. 118 t EQUIPMENT - Hold-down device - Central lubrication system - Radio control & operation from control panel possible - Control panel, mounted in cabin, containing: Emergency stop piping button Selector switch for manual or automatic operation Control elements for manual operation Control elements for automatic operation

Year of construction: 2020, Condition: excellent (used), cistern with conveyor in it with in front a dosing auger length 9 meters width 2 meters Dcebvcjilqfqotnnjg

Condition: used, Included container 28,5 m3 Debvcov Hpn Sstnnecg

Condition: ready for operation (used), Year of construction: 2016, operating hours: 100 h, -complete line with 2T/h capacity for copper cables -1x shredder MTB BDR 1245 / bearings / rotor just 12 months 75kw -2x MTB BAT 1000 shredder / bearings / rotor just 12 months 75kw -conveyors X 3 -hopper X 1 -ELDAN densimetric separation table -Plastic and copper screens X2 -available 6 months - ready for production -Electrical cabinet and dust collector available for additional supply Dsbveq Rfiisctnnocg

Year of construction: 2007, Condition: ready for operation (used), A Stummer bale opener is available for opening compressed fiber bales for subsequent feeding. Output basic PES: approx. 1100kg/h, feed conveyor belt length: 5000mm, machine dimensions X/Y/Z: approx. 3550mm/2400mm/3000mm, weight: approx. 5000kg, operating hours: approx. 10200h. On-site inspection is possible. Dcebvcevu Dfhotnnjg

Condition: good (used), Manufacturer: SBM Dcjbovum Dyevctnnjg with grinding track Including subframe, electric motor (approx. 50 kW) Available immediately

Condition: new, Year of construction: 2023, Functionality: fully functional, machine/vehicle number: WPZ, Impact shredder, model: WPZ This is a powerful machine that is ideal for shredding different material streams (e.g. electronic waste, biomass, plastic and metal composites). A shredding shaft is driven by a 7.5 kW motor. The disks arranged there shred the materials. An adjustable opening defines the outlet size of the materials. Dobvctsuw Sc Rsnnocg -- AVAILABLE IMMEDIATELY-- SUBJECT TO PRIOR SALE -- THE PICTURE IS AN EXAMPLE REPRESENTATION --

Condition: excellent (used), Year of construction: 2017, Functionality: fully functional, overall weight: 1,300 kg, rotor diameter: 250 mm, number of blades: 14, total length: 1,975 mm, total height: 980 mm, rotor speed: 250 rpm, rotor length: 600 mm, power: 11 kW (14.96 HP), rotational speed (max.): 750 rpm, input voltage: 400 V, fuel type: electric, color: white, Efficient wood processing: The Vecoplan VAZ 60 was specially developed for the requirements of the wood processing industry as well as for craft businesses such as joiners, carpenters and carpenters. This robust and durable machine offers you an efficient solution for introducing wood waste into the processing process. Debvcsvugy Uotnnscg With its powerful single-shaft shredder, the VAZ 60 processes a wide variety of materials and quantities - directly and without additional steps. An ideal choice for companies that value cost-effectiveness and reliability.

Condition: excellent (used), 1,5kW weight of machine 235 kg Djbov Hpl Dovctnnocg

Year of construction: 2020, Condition: new, New machine, packed! Never used! Everything that is shown in picture coming with device. Hoses, pipes pump, etc. Dcobemfu R Sevctnnog Ready for transport.

Year of construction: 2011, Condition: ready for operation (used), A Gross Apparatebau GmbH shredder, which was used in the wood industry, is available. Feed opening X/Y: 600mm/800mm, hopper volume: 0.6m³, rotor diameter: 252mm, rotor length: 600mm, rotor speed: 90rpm, drive power: 18.5kW, number of knives: 14, screen perforation: 10mm-40mm, suction nozzle diameter: 160mm, machine dimensions X/Y/Z: approx. 1800mm/1200mm/1650mm, weight: approx. 1300kg, operating hours: 4578h. Documentation available. On-site inspection is possible. Dcebvctnou Nlkxonsg

Condition: ready for operation (used), Functionality: fully functional, Structure of the machine: - 3 separating stages with 2 separating cubes each (6 separating cubes in total) Functional sequence: - Shredding and feeding: -Plastic regrind (ABS, PS, PO) is shredded and fed into the separating system - Electrostatic charging: -Plastic regrind is charged in the electrostats via friction -The differing chemical and physical properties of ABS, PS and PO lead to different charges -Positively and negatively charged particles are created -Special "mirrors" concentrate the electric field in the separating cubes - Deflection and separation: -Positively and negatively charged particles are deflected in different directions by the electric field - Collection of the separated materials: -The differently charged plastic particles are bagged by type into big bags at the end of the separation section In addition to the electrostats, the following system components are available on request: - Rubber separator - dryer - Material hopper - 3 power supply units Dcjbvceu Tulkotnnsg - 2 switch cabinets - Screw conveyors

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: Modelle: 55/500; 75/800; 35/450, WiPa conveying blowers of type WRTG, in the models: 55/500; 75/800; 35/450. These are used for the pneumatic conveying of shredded plastic material. Unlike the WTG conveyor fan, the WRTG conveyor fans are equipped with a belt drive that transfers the motor drive line to the impeller. The type WRTG is used, for example, in washing systems in which moist materials are to be transported pneumatically. As the drive unit is separated from the impeller by a belt drive, no water can penetrate the motor. The bearing unit of the impeller is protected against the ingress of water and dirt. A generously dimensioned maintenance door makes cleaning and maintenance work very easy. Also available as a wear-protected version. -- AVAILABLE IMMEDIATELY-- SUBJECT TO PRIOR SALE Djbvctjuw Sbysnnjcg -- THE PICTURE IS AN EXAMPLE REPRESENTATION --

Condition: new, length 1900 mm Dcebvcshx Halstnneg width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 Contents 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device - Drainage device - Anti-tip device and forklift pockets.

Condition: used, Year of construction: 2000, operating hours: 15,036 h, Machine is available immediately, if you are interested please contact us and arrange a viewing appointment Dcebvctnev Incdjnsg

Year of construction: 1994, Condition: ready for operation (used), Motor power: 37kW, rotor diameter: 500mm, rotor width: 790mm, cross-section: approx. 500mm/790mm, stator blades: 2-row, rotor: 6 blades left and right. Including cyclone, pipes, blower, 3 sets of knives and sieves with a diameter of 6mm/8mm/10mm. Grinding capacity: 6 sieve: 150kg/h, 8 sieve: 300kg/h, 10 sieve: 400kg/h. Documentation available. On-site inspection is possible. Dcobvctnsui R Rcjnsg

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: Modelle: 55/500; 75/800; 35/450, WiPa conveying blowers of type WTG, size: 55/500; 75/800; 35/450. These are the standard for pneumatic conveying in the plastics recycling industry. The material is sucked in by the blower, accelerated by the impeller and conveyed into the pipeline. The motor is bolted directly to the housing wall and picks up the impeller via the motor shaft. A generously dimensioned maintenance door makes cleaning and maintenance work very easy. Also available as a wear-optimized version -- AVAILABLE IMMEDIATELY-- SUBJECT TO PRIOR SALE -- THE PICTURE IS AN EXAMPLE ILLUSTRATION -- Dcebvctnouw Sbgjneg

Condition: new, length 1900 mm width 810 mm height 860 mm internal dimension 1,5 x 0,74 x 0,78 Contents 600 l The containers are chip bins !!! - powder-coated in RAL 6011 green. - tilting device Dcobvctefrztfonnsg - Drainage device - Anti-tip device and forklift pockets.

Year of construction: 2020, operating hours: 1,850 h, Condition: excellent (used), Functionality: fully functional, This is a complete plant with MULTISTAR screening deck, infeed belt, undersize collection belt, oversize cross belt, return belt undersize discharge belt (according to plan documents). Dsbem Uybijvctnnocg

Condition: ready for operation (used), Year of construction: 2004, One shredder is available, blade width: 3x 46mm, power: 30kW. Dobsh A Rqusvctnnscg

Condition: new, Year of construction: 2024, Functionality: fully functional, machine/vehicle number: DEWS500, Double soaking auger, model: DEWS500. Power per screw: 7.5 kW With the Wipa double soaking screw, heavy materials can be separated from material streams to protect downstream machines. By pre-wetting plastic material streams, downstream units achieve better performance results. All components are easily replaceable so that you can react quickly in the event of material changes or damage. -- IMMEDIATELY AVAILABLE -- SUBJECT TO PRIOR SALE -- THE PICTURE IS AN EXAMPLE ILLUSTRATION -- Dcjbsuw R R Hsvctnnsg

Year of construction: 2020, Condition: ready for operation (used), Six (6) identical pneumatic knife-gate valves Watergates are available. Housing: stainless steel, valve blade: stainless steel, max. operating pressure: 4bar, medium temperature range: -35°C-120°C, machine length: approx. 1873mm, machine diameter: approx. 382mm, weight: approx. 280kg. Documentation available. On-site inspection is possible. Dcobvctnsugmwlonjg

Year of construction: 1995, Condition: ready for operation (used), A Big Komet 12 press is available. Pressing force: 120kN, dimensions X/Y/Z: approx. 4000mm/1100mm/1100mm, weight: approx. 5000kg. Dobvctnetva Dgjnocg