Condition: used, Year of construction: 1994, pressing force: 50 t, power: 22 kW (29.91 HP), We sell baler BAUER Technical data: Djbu Tiev R Dtdo N Sjkl Installation of the secondary raw material baler Manufacturer BAUER Model 401 Year of production 1994 Power 22kW Compressive force 40-50 t The dimensions of the press are 10300 x 2000 x 3000 mm Tipping weight ~ 400 kg PRICE ON REQUEST!

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Heavy Duty Type Inclined Vibrating Screens are designed for the classification of all kind of materials such as medium size aggregates and finished products. • Model: FABO TE-1340 • Type: Vibrating Screen • Size: 1300 x 4000 mm • Deck size: 2-3 • Motor: 11 kW Bearings: Heavy duty SKF-FAG • Capacity: 60-90 TPH • Including chassis, motor and safety guards. Dkebu Tswhu Hzei N Ssl FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Year of construction: 2024, Condition: new, *Only the neodymium overbelt magnet is offered, not the conveyor belt underneath. *Neodymium magnets are among the strongest magnets in the world. They have an extreme pulling power and cannot be compared to ferrite magnets. Extremely high degree of separation, depending on the bulk height and the starting material. Probably the most compact overband magnet on the market. The competition often uses the less powerful ferrite magnets to save costs. Dkebu Tedubpuoi N Sjl dimensions approx. Length: 104cm Width: 22cm Height: 28 cm (at the motor) *Without controller Surcharge for simple manual start/stop control + 495 € A high-performance industrial neodymium magnet is installed. High-performance neodymium magnet approx. 600x68x36.5 mm * So nails are attracted to a length of 600 mm and thrown off to the side, in the area that is no longer magnetic. This overbelt magnet should be mounted approx. 5 - 9 cm above the material flow. *Assembly/suspension on site Ideal for separating nails from wood chips. Optionally also in a single-shaft shredder that is sucked off Requirements: *Your belt width or useful width inside (of the existing conveyor belt) should ideally be narrower than 55 cm *Suitable for separating nails from material flows that are less than 12 mm high and with a chip length of less than 25 mm. ----- Optional at extra charge: Cross and ascending belt demonstrators from € 7,995 net

Condition: ready for operation (used), Year of construction: 2018, operating hours: 5,300 h, Pronar screening machine 20.55 Year of manufacture 20.55 Dsbujvxiz As Ti N Sjkl 5300 operating hours

Condition: ready for operation (used), Year of construction: 2016, FEEDER VIBRATOR Brand: SPALECK Dkebevdkxtou Ti N Sjl Type : SFLU 1600 Including chassis Perfect condition, ready for use. Available unless sold in the meantime.

Year of construction: 2022, operating hours: 500 h, Condition: as good as new (ex-display), machine/vehicle number: 22-014, Very good metal separator (inductive sorter) for separation of all kinds of metal (incl. stainless steel). Can be used before ECS, behind or stand alone. Ejecting of all metals larger 0.5 / 1 mm possible. Reasonable using for material up to 60 % metal content. Unique flap technology, no pressured air necessary. Machine is ready for using, can be visited or tested. If wished can be equipped with camera. If the machine is too small we can build also bigger. Dkebusqabm Es Ti N Ssl It is our demonstration machine. Throughput / capacity depending on material and purpose. Price on negotiation!

Condition: used, Year of construction: 2002, pressing force: 115 t, power: 150 kW (203.94 HP), For sale: Paal Konti 425 D horizontal baler Dksbsv R Dqcju Ti N Sjl Technical specifications: Manufacturer: Paal Type: Konti 425D Year of manufacture: 2002 Feed opening: 102 x 200 cm Drive power: 2 x 45, 2 x 75 kW Pressing force: 115 t Settings: Horizontal, fully automatic Roll weight: 550-850 kg Pressing weight: 36 t PRICE ON REQUEST!

Condition: new, Year of construction: 2025, *All of our products are made with care and covered for 1 year warranty! *Installation and Operator Training FREE Fabo tracked jaw crusher FTJ 11-75 is a complete mobile system which moves on hydraulically driven tracked system with 1 km/h speeds and combination of a vibrated grizzly feeder, 1070x760 mm jaw crusher, foldable stockpile conveyors, control unit and electric generator. In today's conditions and technological processes, businesses are beginning to think about how to make their field of activity more efficient. As they make it more efficient, they always take into consideration factors such as the operationally of the machines they use, their low cost and staffing needs. Our Tracked Crushers can crush with high performance even on the most demanding mine sites with its specially designed body and compact structure. Customization can be done to our tracked systems by Jaw Crusher, Primary and Secondary Impact or Cone Crusher. All necessary equipment for the process is combined only single chassis and processing equipment is driven by electrical motors. Overall production capacity is 150-300 tph Advantages of Tracked Crushers; -Heavy-duty walking tracks can reach places where ordinary machines cannot reach. -It has the appropriate dimensions and sound level to crush construction waste in the city. -The fuel consumption of the generator and walking track units are very economical. -System maintenance and management is very easy with latest technology control software. TECHNICAL SPECIFICATIONS: -Model: FTJ 11-75 -Production Capacity: 150 – 300 tons per hour -Maximum Feeding: 700 mm -Crusher Type: Jaw Crusher -SIZE: 1070x760 mm -Generator: 300 kva -CSS Setting: 45 – 160 mm -Weight: 55 tons -Dimensions: 2900x3500x14.500mm – Low investment and operation cost Djbetpgh Dou Ti N Sskl – Zero substructure preparation – Easiness at usage and maintenance – Easy assembly and disassembly advantages. FOR FURTHER INFORMATION PLEASE FEEL FREE TO CALL US!!!

Condition: as good as new (ex-display), Year of construction: 2024, Primary crusher Basic machine starting from € 29,950 net *Options against surcharge Ideal for pre-crushing bulky materials such as pallets, boards, beams, fruit crates, polystyrene, plastics and much more. For the production of wood chips, the primary crusher can also be installed directly above a single-shaft shredder Machine in pre-production * Special options available at extra cost Your advantages: + Volume reduction of up to 70 + Significantly lower transportation costs + Low disposal costs + Production of fuel material + Also ideal upstream of a single-shaft shredder for the production of wood chips Weight: 1,200 kg Dimensions 2050x850x1600 mm Cutting unit opening 1300x700 mm *Optionally also available in 1600x700 mm (motor then 11 kW) (surcharge + 4.995 € net) Throughput: up to 50 pallets/pieces per hour *depending on material Motor: 7.5 kW Options: Industrial top hopper (closed on 3 sides) + € 4,950 net Extra emergency / off button + 495 € net 200 mm extension + 497 € net Requirements for the raw material: - Moisture content less than 30 % ATRO - The machine must be installed in accordance with CE guidelines or secured on site against access from below (into the cutting unit) - Pallets up to a dimension of 1200x800 mm can be processed Longer parts also work on edge Djbu Tofd Icisi N Sskl

Condition: new, Year of construction: 2025, Functionality: fully functional, machine/vehicle number: ME 1650, total height: 4,500 mm, total width: 3,800 mm, total length: 10,800 mm, overall weight: 18,000 kg, power: 22 kW (29.91 HP), ME 1650 Mobile Screening Plant 130 / 250 Tons per hour capacity. The GNR ME1650 Mobile Screening Plant can be fed with loaders in sand or mines, or connected by a belt to another crushing screening plant in use. Dkebu Ti Nswhpf So Sel GNR ME1650, which can be operated with a generator or mains power, is capable of screening sand in all conditions. The most important advantages are low-cost transportation, easy installation in a short time, and wide usage area. FOR MORE INFORMATION, PLEASE CONTACT US!

Condition: as good as new (ex-display), Year of construction: 2021, operating hours: 10 h, Functionality: fully functional, machine/vehicle number: GSE 30602103001, ZERMA shredder Type: GSE 300/600 + DUST CYCLONE Includes spare parts, knives, counter-knives. Djbujvdkw No Ti N Sekl Like new, only used for a few hours

Year of construction: 2015, operating hours: 8,500 h, Condition: ready for operation (used), Drum screening system with various drum sizes. Debu Ti Nevw T Epj Sjkl

Condition: used, Year of construction: 1994, pressing force: 30 t, power: 22 kW (29.91 HP), Horiontal Baller Paal LIKON 200C Technical data: Engine power - 22 kW Year of production - 1994. With oil cooler Horizontal binding x 4 times Pressing force - 30 tons Overall dimensions of the press: 10000x2000x2750 mm Weight of the press: 10 tons. Dimensions of the loading opening: 1400 x 700 mm Bundle dimensions - 700x1100x1000-1200 mm variable length With hydraulic oil Without binding wire Without conveyor belt, it worked in a print shop, only with dry shredded print waste! Motorcycle hours - 62639 The press is in good condition, ready for operation Dkobu Tev R Dn Uji N Ssl PRICE ON REQUEST!

Condition: used, Technical information: - Engine power - 11 kW - Maximum engine diameter - 690 mm - Minimum engine diameter - 150 mm -Two types of clamping jaws - Foot switch - Weight - 1250 kg - Dimensions - 2950 × 1150 × 1250 mm - Control panel with an electrical security system Debu Tsvuqn Noi N Sekl For further information please refer to the technical data sheet or request it.

Condition: good (used), Technical data: Briquetting press RUF RB 440 Press capacity when pressing wood: up to a maximum of 440 kg/hour Material moisture: maximum 15 % Motor power: approx. 30 kW Dkebu Ti Njt H D Ezs Ssl Briquette size; rectangular: 150 x 60 mm Length: 40 - 110 mm Dimensions approx. 1680 x 1800 x 2000 mm Weight: 3000 kg

Condition: used, Year of construction: 1998, pressure:8 t box opening:750 x 500 mm box depth:450 mm material:Pappe,Plaste - cardboard Feed opening:690 x 500 mm voltage:230 / 50 V / Hz transport measurements machine:900 x 600 x 2150 mm Fully automatic hydraulic CHANNEL BALL PRESS for recycling with conveyor unit/conveyor belt LxW: 4500x1000mm motor driven with automatic binding unit 3-fold bale count display/counter bale chamber LxWxH: 1800x800x800mm with 1,2m³ volume bale size LxWxH: 800x800x300-1600mm Filling opening LxW: 1200x730mm: Filling height 1200mm Hopper size LxWxH: 1200x1200x1400mm; filling height 2500mm Djbu Tieufudws N Sokl

Year of construction: 2011, Condition: used, Capacity 20 m3 5,5 kW Djbusiinrye Ti N Sskl 400 A Weight 5650 kg

Year of construction: 2012, operating hours: 13,500 h, Condition: ready for operation (used), Functionality: fully functional, Sieve drums 8 mm, 10 mm, 20 mm, 40 mm available. Djbuovw T Dfo Ti N Sskl

Condition: used, Year of construction: 1992, pressing force: 30 t, power: 15 kW (20.39 HP), Technical specifications: Dkobu Tijv R Di Eo N Sel Manufacturer: Homa Type: BP3000P Year of manufacture: 1992 Filling opening: 1050 x 820 mm (L x W) Drive power: 15 kW Pressing force: 30 t Settings: horizontal, fully automatic Bale size: 800 x 900 mm Bale weight: ~ 300 kg Machine weight: approx. 5,650 kg PRICE ON REQUEST!

Condition: new, Description:  Screen deck system consisting of 2 decks for screening waste wood or wood chips  Input material 0-200 mm  Capacity approx. 80 m³/h (depending on material)  Material is separated into 2 fractions 0-25 mm and oversized particles  to be mounted on the customer's own impact walls or base frame Technical data  Screen deck 1: length = 5,200 mm; width = 1,215 mm o External dimensions: length = 5,500 mm width = 1,850 mm o Screen area 6.3 m², number of shafts 40 pieces o Drive 2 x 7.5 kW geared motors o Screen body polyurethane (star screen) D 166 / 12 fingers o Screen shafts as plug-in system (easy and cost-effective adaptation to other grain sizes possible) o External lubrication of the bearings, optional central lubrication possible for an extra charge Debu Teg I Uqiei N Sekl Delivery time approx. 16 to 18 weeks

Condition: good (used), Good, used condition Few operating hours Dsbujt Hxudj Ti N Sekl Motor: 11 kW Throughput up to a maximum of 200 kg / h Briquette: 150x60 mm

Year of construction: 2009, Condition: like new (used), Press with container Dkobu Ti Nofhb Tie Ssl Engine 5,5 kW 400 V

Condition: used, Year of construction: 1995, pressing force: 85 t, power: 170 kW (231.14 HP), BALLER PAAL KONTI 425 C Technical specifications: Manufacturer: Paal Type: Konti 425C Year of manufacture: 1995 Feed opening: 102 x 175 cm Drive power: 170 kW Compression force: 85 t Settings: Horizontal, fully automatic Roll weight: 500-650 kg Press weight: 25 t PRICE ON REQUEST! Djbu Tiov R Difs N Sjkl

Year of construction: 2023, Condition: new, Machine in preproduction machine available Advantages: + special rotor with reduced knife protrusion + Motor 22 kW + effective square knife * for pallets: up to 10 pallets per hour * depending on the sieve and material. With smaller residual wood, significantly more. Engine: 22 kW; 400 V - 50 Hz - 3 ph, Sieve: 15/20 mm hydraulically operated slide Current screen perforation (15/20 mm) * can be exchanged Extraction nozzle Ø 200 mm. Feed opening 1000x1000 mm Dimensions: 2000x1800x1645mm Example image above: The color of the system may vary Weight: 1920 kg. Included as standard: - Control cabinet with PLC control - automatic star / delta start - fast hydraulics - automobile. OFF when the rotor is idling - Speed ​​70-90 rpm for high throughput - cycle control to avoid idle times, - performance-increasing step control of the hydraulic slide, - Pertinax guides for hydraulic slides, - vibration-damping machine feet, - CE conform. Dkebuedv Eu Hs Ti N Sol The following options are available at an additional cost: - Additional row of knives + € 2,790 - segment bottom + € 6,890 (recommended for materials with a wall thickness thinner than 3 mm) - Special K-rotor storage + € 3,480 If necessary, consider shredding plastic with sieves smaller than 15 mm or with a lot of fines. If the bearings are lubricated with grease every approx. 4 weeks in operation, this is not necessary) - Raise the shredder by 30 cm (preparation for conveyor belt) + € 2.480 net - Angled conveyor belt (discharge height approx. 220 cm) + € 12.980 net - Overbelt magnet + € 5.980 net - Control conveyor belt and overbelt magnet + € 2.750 net (Start and stop synchronized with the hacker) - Exhibition hopper 1500x1500 mm + € 3.480 net Requirements for the raw material: - The moisture content (atro) must be below 30% - The loading must be free of metals and mineral impurities. This can result in damage to the tools and / or increased wear

Year of construction: 2007, Condition: like new (used), Press force 24 t 3 phase 3 x 400V, 50 Hz Bale size (W x D x H) 1500 x 800 x 1100 mm Cardboard up to 500 kg Loading aperture 1500 x 650 mm Dksbsfhb Tbsu Ti N Ssl Dimensions: (W x D x H) 2105 x 1190 x 3185 mm