Condition: used, Rotor width: approx. 300 mm Dodpfxjxgtips Ah Rscn Rotor diameter: approx. 300 mm Stator knives: 6 Rotor knives: 9

Condition: new, Klanke Supercut roll splitter for efficient shredding of reject rolls. Features: -Automatic safety lock -Emergency stop rip cord -Siemens SPS Technical data: Blade length: 3000mm Cutting channel opening: 1200mm Motor power: 15kW Cutting force: 50to Order goods Dcsdpfx Ahsn I Rgps Rjn Price and further information on request. We will be happy to make you a non-binding offer.

Condition: reconditioned (used), Year of construction: 2014, operating hours: 5,612 h, functionality: fully functional, pressing force: 48 t, filling opening width: 1,020 mm, filling opening length: 1,250 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 550 kg, total height: 2,800 mm, overall weight: 12,000 kg, transport height: 2,800 mm, oil tank capacity: 300 l, power: 30 kW (40.79 HP), net weight: 12,000 kg, volume flow: 332 m³/h, Technical information baler: Manufacturer HSM GmbH + Co. KG Typ VK 4812 Year of construction 2014 Hours of operation 5,612 hours, stand August 2025 Press power main press 48 tons Specific press capacity 58,2 N/cm² Feed channel 1,250 x 1,020 mm Theoretic cycle time 11.2 sec. Theoretic throughput rate 332 m³/hour Bale size 1,100 x 750 x 600 up to 1,200 mm Driving motor 30 kW Connected load 32 kW Rated current 59 A Tying system 4-fold horizontal, fully automatic Throughput rate at a bulk weight of 20 kg/cbm up to 6 tons/hour bulk weight of 50 kg/cbm up to 13 tons/hour Bale weight up to 550 kg, depends on material SPS controller Siemens SIMATIC S7-200 Operating panel Siemens HMI Touch Panel Filling quantity hydraulic oil tank 300 L Oil type HVI 46 Machine installation dimensions with bale chute 10,046 x 4,387 x 2,705 mm (l x w x h) Transport dimensions baler 8,500 x 2,500 x 2,750 mm (l x w x h) Machine weight press approx. 12 t Dcodpfx Aovtpq Hoh Ren Scope of delivery: Baler HSM VK 4812, without hydraulic oil, without conveyor system. Two wire reel boxes for 8 pieces 40 kg wire reels, without wire Bale chute Machine documentation in German Comments: The press is equipped with an oil cooler and potential-free contacts for external control. The control cabinet is operated from the left in the direction of pressing, the needle unit is located on the right-hand side and can be folded back for transport. The press was partially overhauled and tested in our workshop, see photos. The documentation (operating instructions, CE declaration, electrical/hydraulic circuit diagrams) is available in German. Viewing is possible by appointment. We accept no liability for the technical details or any errors.

Condition: excellent (used), Year of construction: 1998, functionality: fully functional, cutting force: 500 t, power: 110 kW (149.56 HP), net weight: 60 kg, total length: 15,000 mm, cutting length (max.): 1,200 mm, year of last overhaul: 2020, Hydraulic scrap shear Taurus SM540 Cutting force: 500 t Drive: 2x 55 kW Machine ex location South-Germany Dsdpfx Ahemx Twro Rocn Dismantling and loading: On request by personnel IUT Beyeler AG Year of construction: 1998 Availability: end of february 2024December 2023 Machine can be visited in operation near DE - 66111 Saarbrücken Price including dismantlin and loading on trucks ( all expenses at our side )

Condition: used, machine/vehicle number: 13386, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 Stator knives: 3 rows Dsdpsxgi Syofx Ah Rocn Infeed cross-section approx. 1200 x 800 mm Drive motor: 132 kW

Condition: used, Cutting mill / Cutting mills Dcodpfxexgth Ej Ah Rsn Manufacturer: HERBOLD Meckesheim GmbH Type: SMS 45/60 Heavy-duty series Infeed opening 600 x 680 mm Drive motor 75 kW

Condition: excellent (used), Year of construction: 2015, operating hours: 19,750 h, functionality: fully functional, pressing force: 100 t, filling opening width: 970 mm, filling opening length: 1,800 mm, bale width: 1,100 mm, bale height: 750 mm, bale weight: 750 kg, oil tank capacity: 2,000 l, net weight: 33,000 kg, volume flow: 643 m³/h, Technical data baler: Manufacturer HSM GmbH + Co. KG, Germany Type VK 8818 R-FU Year of construction 2015 Operating hours 19,750 hours, as of July 2025 Number of bales pressed: 24,760 bales, as of July 2025 Main press force 1000 kN Specific pressing force 120 N/cm² Pressing force cutting edges free rammer 121 kN Dimensions of feed chute 970 x 1,800 mm Theoretical cycle time in idle mode 8.3 seconds Theoretical throughput capacity 643 m³/hour Bale dimensions 1,100 x 750 mm, the length is variable 600 up to 2000 mm Drive power 2 x 45 kW frequency-controlled Connected load 110 kW Total current consumption 213 A Fuse protection 250 A slow-blow 5-fold horizontal tying, fully automatic Throughput rates with a bulk density of 20 kg/cbm 12.86 t/hour Bulk weight of 50 kg/cbm 32.15 t/hour Bale weights with a bale length of approx. 1.2 m 650 up to 750 kg/bale, depends on materiel Hydraulic oil tank capacity 2000 litres PLC control Siemens S7-300 Siemens TP 700 control panel Press dimensions assembled 12,130 x 4,800 x 3.270 mm (l x w x h) Press dimensions with conveyor system 35,000 x 8,480 x 7,745 mm (l x w x h) Transport weight baler approx 33 t (Main press approx. 12 t, press channel with bale clamp approx. 10 t) Special machine equipment: Access locking by means of key transfer system Electro-hydraulic locking of the press carriage during the tying process so that the press plunger does not change position with highly expansive materials Additional optional equipment ordered: Frequency-controlled main drive, 2 x 45 kW, with up to 40 % energy savings compared to the standard motorisation 2 x 45 kW, with the same power output Manual switch-off or switch-on of the number of strapping wires to save on strapping wire for non-expansive material Cutting-edge frei rammer with 121 kN pressing force Sensory wire monitoring, with press switch-off in the event of wire breakage or wire end Bale chute Visual warning signal, mounted on the control cabinet Djdpfxjxb Dvve Ah Rocn Condition of the baler: The entire baling system (baler and conveyor belt) is in good, operational condition and is cleaned, lubricated and maintained by the operator on a weekly basis in accordance with the manufacturer's specifications. Technical data for the chain belt conveyor: Manufacturer Stadler Anlagenbau GmbH Typ chain belt conveyor KF 1800 Year of construction 2015 Belt speed 0,36 m/sec. Length feeding conveyor 7,000 mm Length elevating conveyor 14,500 mm Length goose neck 1,550 mm Grade 30° Nominal width 1,800 mm Effecting width 1,638 mm Height conveyor over all 7,745 mm Pit dimensions to conveyor belt 11,200 x 3,000 x 1,250 (l x w x h) Scope of delivery: The conveyor belt, the transverse distribution belt and the baling press are for sale, with bale chute but without wire pulling stations and without wire. Comments: The documentation (Manual, CE-declaration, electr./hydr.-drawings), are completely available. Inspections are possible after agreement. We will not assume liability for the given technical data and possible errors.

Condition: used, Rotor diameter: 800 mm Rotor width: 1200 mm Rotor knives: 7 Stator knives: 3 rows Infeed opening approx. 940 x 1154 mm Dcsdpfsxgi Stsx Ah Ron Drive motor: kW

Condition: used, Cutting mill Manufacturer: HERBOLD MECKESHEIM Type: SMS 80/160 Dodpfoxgthrjx Ah Rscn Rotor 800 x 1600 mm wide Drive motor 250 kw

Condition: used, machine/vehicle number: 13260, Rotor diameter: 600 mm Dcjdpfx Asxgi Smjh Rsn Rotor width: 1000 mm Rotor blades: 5 Stator blades: 2 rows Infeed opening approx. 720 x 980 mm Drive motor: 75 kW

Condition: used, Cutting mill for high loads (heavy duty) Make NETZSCH CONDUX Type CS 500/600-4 Inlet opening approx. 600x600 mm Dedpfx Aoxgthloh Rscn Semi-open 5-knife rotor, 4 stator knives Drive motor 75 kw

Condition: used, machine/vehicle number: 13334, Rotor diameter: 600 mm Rotor width: 650 mm Rotor knives: 8 Stator knives: 3 rows Dcedpjxgi Sgsfx Ah Ron Infeed cross-section approx. 650 x 600 mm Drive motor: 75 kW

Condition: used, The Herbold PU 500 fine grinder is suitable for fine grinding of plastics and soft to medium-hard materials. Dcjdpfjxgtgzsx Ah Ron Drive power 55 kw Grinding disk diameter 500 mm Throughput capacity approx. 200-800 kg/h depending on material and fineness

Condition: used, machine/vehicle number: 12979, Rotor diameter: 300 mm Rotor width: 200 mm Rotor knives: 3 Stator knives: 3 Infeed opening approx. 220x320 mm Drive motor: 5.5 kW Dcjdpfx Asxgi Sajh Rjn

Condition: used, Refurbished granulator, heavy-duty series, hard-faced Can be used for dry and wet shredding Typical applications: Plastic hollow bodies, secondary shredding of pre-shredded waste, Dcjdpfx Aexgtgnjh Rjn Rotor 800 mm diameter x 1600 mm width Open F7 rotor with replaceable blade supports Drive power 160-250 kw With forced feeding by 3 load-dependent controlled feed screws Hydraulically hinged, hydraulically swiveling screen basket Throughput capacity up to 5 t/h depending on material and grain size

Condition: used, HERBOLD PU800 pulverizers Dcjdoxgtf Rspfx Ah Rsn Suitable for soft to medium-hard materials Used so far for fine grinding of plastics Diameter of grinding disks: 800 mm Drive motor: 90 kw

Condition: used, Condux Granulator type CS 300/600-4 WK Rotor diameter: 300 mm Rotor width: 600 mm Rotor knives: 3 Housing with 4 stator knives Dcsdjxgtfwepfx Ah Ren Drive motor 11 kW (on request max. 30 kW)

Condition: used, Pressing screw REG-MAC for drying films and fibers, and for compacting foam (e.g. polystyrene, EPS) Drive motor 55 kw Dodjxgtd Hjpfx Ah Rscn

Condition: used, Opening: approx. 1600 x 1600 mm Rotor width: approx. 1600 mm Rotor diameter: approx. 560 mm Dcodpfexgtdaex Ah Ron

Condition: used, Double-shaft shredder Drive 37.50 KW Dcodpfx Aoxgtcvsh Rsn

Condition: used, Rotary valve, rotary airlock Manufacturer: TrennSo Type: AS 600x1400-6 Working width: approx. 1400 mm Dcsdpfx Ahexgr Sve Rsn Rotor with flexible, replaceable rubber lips With free shaft end, without drive Condition: unused

Condition: used, kW: 30 Dodpfexgr Rlox Ah Rscn Rotor diameter: 500 mm Rotor width: 1200 mm

Condition: refurbished (used), Dry cleaner/ Friction cleaner with 110 kW drive power. Dodpfoxgr Rfjx Ah Recn Throughput max. 4t/h depending on type of plastic and material thickness

Condition: used, Can be used for pre-shredded plastic waste (hard plastic, film), Throughput approx. 0.5-2 t/h depending on material type Drive power 30 kw Dodoxgr Hgopfx Ah Rjcn A total of four dryers of this model are available.

Condition: used, Year of construction: 2023, HERBOLD zigzag classifier (gravity classifier) Type SZS 630/175 Sifting channel 630 mm wide Dcsdpfjxgrzwex Ah Ron With blower 7.5 kw Material: mild steel Condition: unused Year of construction 2023