Used Wood shredder for sale (382)

Condition: good (used), Year of construction: 1991, power: 22 kW (29.91 HP), suitable for pallets or other residual material Cob Hhst Tvk Aot Riorb Rotor width = working width 98 cm 22 kw motor with discharge auger

Condition: excellent (used), Year of construction: 1999, operating hours: 730 h, Functionality: fully functional, power: 15 kW (20.39 HP), Schuko single-shaft chipper in perfect condition! Ceb Hht Rswfubmsiorb Operating hours approx. 730

Condition: used, Year of construction: 2014, operating hours: 1,400 h, tire size: 650/55-26.5, Used JENZ 360 wood schredder - incl. Veenhuis tipping trailer Crob Hjv Egbgoht Riob - year 2014 - 1400 h - dimension tipping part: 4000 x 2000 x 2000 mm

Condition: repair required (used), Year of construction: 1992, Feed opening: 600 x 1,000 mm Hopper capacity: 0.6 m³ Throughput: 2.0 - 3.5 rm/h depending on material and screen Rotor diameter: 250 mm Rotor length: 600 mm Number of tools: 20 teeth Ceb Hjv Npf Ajht Rijrb Screen perforation: Hydraulic push floor: Yes Suction nozzle: 160 mm Air speed: 23 m/sec Motor power: 15 kW The machine's bearings need to be replaced. The machine needs to be overhauled. Therefore, it is being sold at a reduced price. Location: From stock, 54634 Bitburg - available immediately -

Condition: new, Universal use (diverse wood, pallets with nails and pins, particle boards, waste and scraps, veneer, MDF plates, cardboard boxes, plastics, textile etc.) Power: 18,5 kW Shaft length: 550 mm Shaft diameter: 222 mm Crob Hht Rjgw Sxzsiob Shaft RPM: 120 rpm Number of cutting knives: 14 Granulation: 10-30 mm Capacity: up to 4 m3/h (depending on the wood) Material discharge opening: 160 mm Material: Plastics, cardboard, wood (chipboards, MDF boards, waste,...) Filling opening: 946 x 567 mm Dimensions L/W/H: 1880/1120/1670 mm Weight: approx. 1250 kg 2 years warranty or 2000 working hours Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: used, Year of construction: 2022, Functionality: unexamined, machine/vehicle number: 0500800070, overall weight: 742 kg, fuel type: electric, The machine presented for inspection was purchased new in 2022. It is in good technical condition on the outside, there are visible scratches from use on the external casings, traces of use, local corrosion centers on the conveyor belt casings. During the inspection, it was not possible to connect to a power source and check the machine in operation. Electric motor 400V Motor power: 9500 W 18.4 A Splitting force: 20 tons Max. cutting length: 500–550 mm Max. wood diameter: 500 mm (minimum 100 mm) Splitting wedge speed: 5 cm/s Splitting wedge return speed: 4 cm/s Saw guide length: 55 cm Chain saw / splitter drive: Hydraulic Chain: C3621 000 0077 / 0.375 / 1.5 mm Conveyor belt length: 3.2 m Max. loading height: 2.0 m Conveyor speed: 0.8 m/s Ceb Hjwhw Izsht Risrb Conveyor belt drive: Hydraulic Weight: 742 kg (632 kg + 110 kg conveyor) Dimensions (W / L / H): 2200 / 1050 / 1250 mm Dimensions - belt feeder (W / L / H): 1850 / 450 / 570 mm

Condition: good (used), Year of construction: 1996, Powerful chipper with large rotor and 30 kw motor Working width 800 mm Year of manufacture 1996 fully functional Ceb Hht Rsv D D T Deiorb

Condition: excellent (used), Functionality: fully functional, Very sturdy RE screening machine/vibrating screen. Crjb Hht Rsv Tn Hgoieb Channel length: 8.0 m. Total length: 9.0 m. Screening zone: 1000 x 5700 mm. Screen perforation: 8 mm. Reinforced triple eccentric drive with 7.5 kW motor. The screen was overhauled two years before dismantling. A completely new eccentric drive and vibrating elements were installed at that time. A second screen deck can also be installed.

Condition: new, Year of construction: 2025, Compacto's 40x40x23mm hollow-ground cutting crowns are suitable for many shredding machines from Weima, Gross, and Votecs. Our cutting crowns are characterized by their special manufacturing in an electronically controlled, special hardening facility. The cutting crowns are manufactured in Germany. They impress with their robust workmanship and high durability and performance. Advantages: Ceb Hhtjwcmk Ij Rierb • Reduced risk of breakage through the use of special materials and adaptation of the hardness to the customer's material • Longer service life thanks to an optimized hardness of 52 to 59 HRC • A lower hardness is used for shredding materials with a metal content to reduce the risk of breakage • Perfect fit thanks to precise machining • Short delivery times thanks to high inventory levels • Highest quality at fair prices As a manufacturer of single-shaft shredders, compacto also supplies blades suitable for shredders from other manufacturers such as Amis, Reinbold, Weima, Gross, Votecs, Mewa, Mawera, mütek, Osmeka, RSN, Zeno, Zerma, Zerbrik, or Untha. Manufacturing other blades according to drawings or supplied samples is also possible.

Condition: as good as new (ex-display), Year of construction: 2024, Functionality: fully functional, EXHIBITION MACHINE new Due to the special shape of the rotor, the highest efficiency is achieved with comparatively low motor power (11kw). Specially designed for: * Hardwood * softwood * chipboard * and all products similar to wood - most modern technology-robust quality Cjbob Dwk Ns Hht Risrb - space-saving construction - powerful with low connected load - special cutting rotor for maximum throughput - multiple usable cutting tools - tooth plate made of special steel - 2000 hours warranty on the high performance gear - exchangeable screens with different hole sizes - intelligent SPS control system with interfering material cut-off (incl. 5m cable) dimensions 1.150x1.130x1.930 mm

Condition: excellent (used), Year of construction: 2002, Residual wood shredder / chipper Year of construction 10/ 2002 Hopper opening approx. 600 × 800 mm Hopper capacity 0.6 m³ Profile rotor with 14 round knives Hydraulic feed Rotor length 600 mm Rotor diameter 252 mm Rotor speed 90 rpm Motor power 15.0 kW CE Dimensions L x W x H approx. 1800 x 1200 x 1610 mm Weight approx. 1,300 kg NEW CUTTING BLADES NEW ROTOR BEARINGS NEW ROTOR BLOCKS NEW SLIDER GUIDES NEW V-RIEMS NEW GEAR OIL Automatic star-delta start-up Switch cabinet with PLC control and 5 meter cable harness Crjb Hht Rjqxbc Deiob Automatic shutdown when hopper is empty Safety package with gearbox limit switch Vibration-damping machine feet Note on used machines: - Subject to errors in technical specifications and prior sale. - Prices quoted are ex location - free loading! - The machines have been cleaned and functionally tested. - All machines are purchased as seen without any warranty. The buyer is free to inspect the machines on site. - Special agreements are only possible in written form. (Inquiries will only be answered with your address and telephone number).

Condition: new, Year of construction: 2024, New machine Year of construction 2024 Technical data: Hopper opening : 600 x 800 mm Hopper capacity: approx. 0.6 m³ Working width of the rotor: 600 mm Rotor diameter: 260 mm Drive power: 15 kW Rotor speed: 90 rpm Number of knives: 14 pieces + 2 pieces Type and size of blades: concave / 40 x 40 mm, reversible cutting crowns concave / 30 x 30 mm, broaching knives Sieve perforation: 15/20 mm Paint finish: RAL 5010 / 7016 Power supply: 400 V +/- 5 % / 50 Hz Included: Switch cabinet (Rittal) incl. 5 m cable Electrical control unit (Moeller / Siemens) Star-delta start-up Rubber oscillating elements E-rotor with blade pockets milled into the profile Cjb Hovymdwsht Risrb Gear limit switch 1st row of blades Hold-down device on the pusher for long and large parts Special broaching blade to prevent lateral jamming Weight: 1100 kg Availability: short term Storage location: Hochheim

Condition: good (used), Year of construction: 1993, operating hours: 3,000 h, Functionality: fully functional, power: 15 kW (20.39 HP), Slow runner with moving floor Rotor width 1 m Motor 15 kw Perforated sieve 20 mm Creb Hhtev Ilvho Rieb

Condition: as good as new (ex-display), Year of construction: 2023, Functionality: fully functional, power: 11 kW (14.96 HP), Untha LR 520 wood chipper Year of manufacture 12/2023, exhibition machine Crsbevw T Uws Hht Rijb 35 operating hours

Condition: new, Year of construction: 2024, Advantages BOVER_BASIC intelligent control system Power set (electric motor, reduction gear and belt transmission) Filling hopper Hydraulic pressure unit Robust and adjustable Hardened knives with four cutting edges with an extended service life Hardened cleaning knives Hardened cutting racks HARDOX sieve The engine start-up is controlled by the star/triangle system Basic characteristics FILLING HOLE (mm): 1445 × 1345 ROTOR WORKING LENGTH (mm): 650 ROTOR DIAMETER (mm): 270 SIEVE HOLE DIAMETER (mm): 14 CAPACITY (m3/h): 3 – 5* POWER (kW): 22 WEIGHT (kg): 1750 * Depending on the material and diameter of openings in the sieve OPTIONS on request: Adjustable sieve rails Suction sink with Ø160 mm attachment Screw/snail conveyor (price for 1 meter) Hi-Lo "TURBO" hydraulic power unit Customized hopper Bover Premium with remote access Crob Hshbdg Ueht Riob Additional Sieve/Screen Heavy-duty gearbox (22/30 kW) Secondary cutting blade HARDOX toothed strip on pusher rack Hydraulic oil cooler system Ethernet PLC plug-in Advise used machines: • Technical data without obligation, mistake and intermediate sale reserve. • Price is considered ex-location price • All articles or machines are bought as seen without any entitlement on warranty. • It is left to the choice of the buyer to view the machines before at its location. • Special arrangements are possible but only valid in written form. (We answer your inquiries only with stated address + telephone number!)

Condition: good (used), Year of construction: 1994, power: 30 kW (40.79 HP), Drum chipper with horizontal infeed Cjb Hhtsu Ezp Aj Rierb max. feed width 300 mm max. feed height 85 mm Motor 30 kw

Condition: new, operating hours: 2 h, Special, patented shape of the ROTOR! Motor power: 11/ 15/ 18 kW, 400 V, 50 Hz Rotor width: 595 mm Rotor speed: approx. 45 rpm Rotor diameter: 280 mm Sieve: hole size 7 to 30 mm (optionally hardened special steel) Cutting crowns: 34 pieces 25×25 mm (hollow ground, 4-way reversible, hardened special steel) Counter blade: up to 2 pieces (2-way reversible, optionally hardened special steel) Throughput*: up to 2 m3/h (*depending on material) Material feed opening approx.: 600 x 350 mm Creb Hhjhq T Udst Riob Solid main bearings compact control cabinet with modern PLC control & 5m cable length Suction diameter: 200 x 200 mm Dimensions L x W x H approx.: 1,050 x 1,180 x 1,890 mm Weight: approx. 900 kg 2000 hour guarantee on the high-performance gearbox

Condition: used, Year of construction: 1995, Functionality: fully functional, power: 37 kW (50.31 HP), overall weight: 5,200 kg, Large chipper, ideal for pallets or similar. Built like a tank, weighs 5 tons. Rotor width 1300 mm. Cjb Hhou Apkist Rierb Motor 37 kW. Travel to rotor approx. 1.3 m. With discharge screw.

Condition: good (used), Year of construction: 1994, Chipper without moving floor 'Rotor width 600 mm Crjb Hhter Eh Nkj Rijb motor 15 kw large rotor diameter with new rotor bearings Gearbox with new bearings

Condition: good (used), Year of construction: 2001, power: 22 kW (29.91 HP), Low-speed rotor with push floor Rotor width 102 cm Cjb Hhtotqfrce Rijrb Motor 22 kw 40 knives on rotor

Condition: good (used), Year of construction: 1993, Rotor width 800 mm 22 kw motor 20 knives on rotor 25 mm concave Crsbjp H Sv Dj Hht Rieb There is also a wooden frame to put the chipper higher so that a conveyor belt fits in below

Condition: good (used), Year of construction: 1993, Low-speed rotor with push floor 800 mm rotor width Cob Hht Rshrmzvoijrb

Condition: good (used), Year of construction: 2006, Drum chipper, high-speed with horizontal infeed max. infeed width 450 mm max. infeed height 140 mm Motor 75 kw with frequency converter for variable speed no vibrating chute included Cjb Hht Rou Rl Rujijrb

Condition: good (used), Year of construction: 1994, Drum chipper, high-speed chipper with horizontal infeed max. infeed width 300 mm max. infeed height 85 mm Cjb Hht Reu Rl Sfjijrb Motor 18.5 kw frequency-controlled for variable speed without vibrating chute

Condition: good (used), Year of construction: 2000, Chipper with horizontal feed , but vibrating chute is not included Crobok Twl Te Hht Rijb working width 350 mm Motor rotor 30 kw