Eccentric press

AITOR ARMM-EF

Condition: used, Thread Rolling Machine, Cold Rolling Machine, Thread Rolling Machine, Profile Rolling Machine Manufacturer: PEE-WEE Model: UPW 24 Serial No.: P07 Year of manufacture: 2007 Maximum rolling force: 24 tons Maximum tool diameter: 270 mm Roll spindle diameter: 69.85 mm Tool bore diameter: 70 mm (nominal diameter) Maximum tool/reception length: 180 mm Maximum workpiece diameter: 50 mm Hydraulic motor power: 3 kW Roll drive motor power: approx. 5.5 kW Electrical connection: 400 Volt, 50 Hz, 10 kW - Pivotable roll spindle for through-feed thread rolling - Roll spindle speed adjustable in 4 steps via gearbox shift - Hydraulic unit integrated in the machine base - Operating manual with electrical schematic Space requirements (L x W x H): 2,000 x 1,450 x 1,900 mm Weight: approx. 3 tons Very good condition Plunge Rolling: The thread rolling tools, having the same pitch as the workpiece, form the thread by penetrating the workpiece up to the nominal diameter. The maximum thread length is limited to the width of the rolling dies. Through-feed Rolling: Used when the thread length is greater than the width of the rolling dies. Through-feed tools are divided into three sections – entry, calibration, and exit. Knurling rolls have no pitch and are swiveled at the lead angle corresponding to that of the profile to be rolled. Dcsdpjuz If Nefx Apmjp Lead angle rolls differ from knurling rolls by having a pitch in the profile. The sum of the lead angle and swivel angle results in the effective lead angle in the workpiece.

Condition: ready for operation (used), Year of construction: 1999, Euromac hydraulic punching machine Type CX1000/30/2000 Capacity 30ton Y-axis reach 1000mm X-axis reach 2000mm X-axis range with repositioning up to 10000mm Control Euromac Eurowin Dedspmt Ttjpfx Apmscp 6-fold multitool + with 6-fold die holder

Condition: used, Year of construction: 2007, pressure 200 t throat 510 mm stroke 16 - 160 mm ram - range of adjustment 120 mm table surface area 1500 x 1000 mm table height over floor 900 mm hole in the table 800 x 250 mm ram surface 1000 x 700 mm tool hole in ram 65 x 110 mm T-slot - width 28 mm number of strokes adjustable 30 - 120 min oil volume Hydraulikaggregat 5 l daylight, max. stroke above - ram adjustment above 600 mm daylight (stroke down, ram adjustment above) 440 mm total power requirement 32,2 kW weight of the machine ca. 24 t dimensions of the machine ca. BxTxH 2,85 x 3,1 x 3,65 m - hydraulic clutch - fixed table - hydraulic overload protection in the ram - hydraulic connecting rod clamping - Motorized ram height adjustment 120 mm with digital display set ram height, rapid and slow speed - fully automatic stroke adjustment, adjustment range 16 - 160 mm - Ram weight compensation - electronic OT correction - Planetary gears - Oil circulation central lubrication - Separate control panel with SIMATIC S7/300 screen control - Press force measuring device - Reversing switch (return) - additional operating mode “set-up-creep speed” - electric stroke counter - electrical preset counter - electrical travel limitation of the connecting rod journal - electronic cam switch - continuously variable drive (frequency controlled) - 2 sockets - Clamping plate - Temperature monitoring main bearing / support bearing / connecting rod bearing - Operating hours counter - Oil cooler - Set of oscillating elements Additional equipment: Djdpsvbk Rwefx Apmocp Electronic roller feed ebu EVX 500 Passage width: 10 - 500 mm Material cross section: max. 1,600 mm² Material thickness: 0.2 - 5.0 mm Number of reels: 2 Roller diameter: 100 mm Intermediate ventilation: up to over 300 l/min Feed length: 1.0 - 9,999.9 mm Feed speed: max. 150 m/min

Condition: used, Year of construction: 1979, Technical details: pressure: 250 t slide stroke: 40-160 mm throat: 545 mm ram adjustment: 110 mm Table dimensions: 1250x800x100 mm biggest distance between table & ram: 670 mm drawing capacity: 16 to table height over floor: 1000 mm surface area of ram: 900x670x100 mm distance between columns: 500x400 mm total power requirement: 23 kW weight of the machine ca.: 16,6 t dimensions of machine: 2,8x1,4x3,7 m dimensions electric cabinet LxWxH: 1,15x0,6x2,1 m Ejector and counter holder force: 16t Table size with 4x T-slots parallel running (1250x800x100mm) Ram plate with 4x T-slots radially running Data at bottom dead center UT: largest stroke: 510mm smallest stroke: 570mm Accessories: - Steel plate 1170x860x80mm * Dcsdpju Nfinsfx Apmsp

Year of construction: 2017, condition: like new (used), 2D Wire Bending Machime Year - 2017 Dodpfx Asmqk Tpopmjcp Manufacturer - VIBRA Wire diameter - 1-4 mm Capacity - 30pieces/ min Power - 3,5 kw

Condition: used, functionality: fully functional, Year of construction: 2011, load capacity: 450 kg, lifting height: 9,900 mm, empty load weight: 2,300 kg, fuel type: electric, tire condition: 70 %, drive condition: 75 %, maximum load weight: 454 kg, Self-propelled scissor lift SKYJACK SJ III 4632 11.7 m working core. 317kg thr personal lift SKYJACK SJ III 4632 scissor lift for sale in excellent condition personal lift, work stand with extendable platform. Manufacturer: Skyjack year of manufacture: 2011 load capacity: 454 kg Working height: 11.7 m Dodpfx Ajugtlispmscp Raised platform height: 9.7m Total width: 1.9 m Total length: 2.3 m Gross weight: 2300 kg non-marking tires operating hours: 374 TROJAN MOTIVE batteries in good condition. built-in battery charger

Condition: refurbished (used), Year of construction: 2009, functionality: fully functional, total height: 8,025 mm, total width: 3,405 mm, total length: 2,810 mm, load capacity per storage section: 250 kg, construction height: 50 mm, warranty duration: 12 months, Equipment: safety light barrier, Table preselection control with article management. Device comes from a lift system. Side shaft claddings have been retrofitted. No side access door. 4 units available. Machine height is adjustable. Storage lift including delivery, installation, DGUV acceptance & warranty. Dcedpow S Udyjfx Apmop

Condition: used, Year of construction: 1967, grinding length 1650 mm grinding width 700 mm workpiece height 600 mm table surface area 1500 x 500 mm table speeds 0 - 20 m/min cross feed autom. 0 - 20 mm/Hub grinding spindle speed 2000 U/min grinding wheel diameter 300 mm total power requirement 19 kW weight of the machine ca. 5 t Dcjdpett S Uajfx Apmsp dimensions of machine L x W x H 5,92 x 3,12 x 2,65 m Accessories: 2 magnetic plates, each 750 x 600 mm; grinding wheel with flange, various grinding wheels and flanges separate, wet grinding attachment

Condition: used, Payload: 0/4 Kg Arm reach: 1.50 mmNumber of Axis: 6 Repeatability: 0.05 mm Robot weight: 250 Kg Mounting: Floor Dodpfxoh Au Ine Apmscp

Condition: refurbished (used), Year of construction: 2007, functionality: fully functional, total height: 6,000 mm, total width: 1,750 mm, total length: 2,820 mm, load capacity per storage section: 500 kg, construction width: 1,300 mm, warranty duration: 12 months, – Tabular control panel with item management – Unit comes from a lift system – Side lift shaft cladding reproduced – 2 units available – 1300x825mm tabular panel, 500kg payload each Dcjdszaqibjpfx Apmjp