Sliding table saw

Altendorf F45 ElmoDrive

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: Werksüberarbeitungsnummer: WÜA20101490328170, cutting length (max.): 3,800 mm, cutting width at rip fence: 1,300 mm, saw blade diameter: 450 mm, table length: 840 mm, power: 6.5 kW (8.84 HP), Equipment: scorer, Used machine GM010.0256 Year of manufacture: 2020 F45 ElmoDrive Machine height: 910 mm Eye-level control panel Dual-sided tilting ( + /- 46°) Maximum blade diameter: 450 mm 6.5 kW (8.8 HP) motor 3-axis scoring unit with dual-sided tilt Table extension: 840 mm Double roller carriage, carriage length 3800 mm On/Off switch on double roller carriage Angle and miter stop CNC parallel fence: 1300 mm Laser cut line indicator Ltodpfx Ahjw Imvmj Uja Spraying device

Condition: used, Year of construction: 2018, machine/vehicle number: Werksüberarbeitungsnummer: WÜA18031207013284, cutting length (max.): 3,000 mm, cutting width at rip fence: 1,300 mm, table length: 840 mm, main saw diameter: 450 mm, power: 7.5 kW (10.20 HP), Equipment: rotational speed infinitely variable, Used machine GM010.0399 F45 Pro Drive Year of manufacture: 2018 Template holder Max. saw blade diameter: 450 mm Motor: 7.5 kW Vario DRW: 3000 mm TPL: 840 mm Ltedjw Nii Sspfx Ah Usa WGA Digit-L PA 1300 mm CNC Front support roller Air cushion table

Condition: new, Year of construction: 2024, functionality: fully functional, cutting length (max.): 3,200 mm, cutting width (max.): 1,300 mm, cutting width at rip fence: 1,300 mm, cutting height (max.): 200 mm, saw blade diameter: 550 mm, power: 5 kW (6.80 HP), sliding table length: 3,200 mm, Exhibition machine F 45 Elmo Drive - Swivel + / - 45 ° - Cutting height 200 mm - Preparation for scoring unit no. M24038 - Double roller carriage with 3200 mm - Angular mitre fence 3200 mm Digit L - CNC rip fence 1300 mm - Duplex mitre fence 1350 mm manual - Template holder Lsdjuh R R Eepfx Ah Ueta - On/Off switch on the double roller carriage - Front support roller

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20-11-14-007, cutting length (max.): 3,430 mm, cutting width (max.): 1,300 mm, saw blade diameter: 500 mm, table length: 1,200 mm, Factory-refurbished Altendorf F45 with ElmoDrive control and parallelogram cross-slide! Ledpfx Ahjxc Uhfo Usta TECHNICAL DETAILS Maximum cutting length: 3,430 mm Maximum cutting width: 1,300 mm Saw blade diameter: 500 mm Table length: 1,200 mm Saw blade projection 90° with single-sided tilting: 179 mm 90° with double-sided tilting: 179 mm +45° with single-sided tilting: 123 mm +45° with double-sided tilting: 123 mm -45° with double-sided tilting: 96 mm MACHINE DETAILS Dust extraction connections Extraction at the top: Ø = 80 mm Extraction at the bottom: Ø = 120 mm Vacuum pressure: 1,200 Pa at total suction port, Ø = 140 mm Air consumption: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Reinforced TPL support 1,200 mm On/off switch on DRW Extendable cross-slide extension Front support roller Laser - kerf indicator

Condition: excellent (used), Robland 3200 silver line format saw with a trolley scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout Ltodjv S Hy Aopfx Ah Usa up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Branded machine in very good condition,

Condition: reconditioned (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 20-11-14-902, cutting length (max.): 3,200 mm, cutting width (max.): 1,000 mm, saw blade diameter: 450 mm, table length: 840 mm, Equipment: rotational speed infinitely variable, Manufacturer-refurbished Altendorf F45 with ElmoDrive control & Digit L display! TECHNICAL DETAILS Maximum cutting length: 3,200 mm Maximum cutting width: 1,000 mm Saw blade diameter: 450 mm Table length: 840 mm Saw blade projection 90° single-sided tilt: 154 mm 90° dual-sided tilt: 154 mm +45° single-sided tilt: 105 mm +45° dual-sided tilt: 105 mm -45° dual-sided tilt: 78 mm MACHINE DETAILS Power: 5 kW Dust extraction connection Upper extraction: Ø = 80 mm Lower extraction: Ø = 120 mm Suction pressure: 1,200 Pa at total extraction port, Ø = 140 mm Airflow: v_min = 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Continuously variable speed Ltsdpfoxc T Tmox Ah Uoa Dual-sided tilting Scorer preparation Template holder Digit - L PA 1,000 mm - CNC Front support roller

Condition: reconditioned (used), Year of construction: 2022, functionality: fully functional, machine/vehicle number: GM010.0310, cutting length (max.): 3,300 mm, cutting width (max.): 1,300 mm, saw blade diameter: 550 mm, input frequency: 50 Hz, power: 7.5 kW (10.20 HP), Manufacturer-refurbished Altendorf F45 with comprehensive ElmoDrive control system! TECHNICAL DETAILS Carriage Lengths and Cutting Lengths Carriage length (double roller carriage): 3,400 mm Cutting length with angle fence: 3,300 mm TIP-SERVO-DRIVE: 2,990 mm Max. blade diameter: 550 mm Saw Blade Blade diameter: 550 mm Blade projection at 90°: 204 mm Blade projection at +45°: 141 mm MACHINE DETAILS Electrical Data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Fuse protection: 25 A Dust Extraction Connection Extraction (top): 80 mm Lsdow I Rtcepfx Ah Ueta Extraction (bottom): 120 mm Negative pressure: 1,200 Pa at main extraction port, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air Cushion Table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) EQUIPMENT Extendable cross-slide table widening Display DIGIT L

Condition: new, Year of construction: 2022, New machine Year of manufacture: 2022 Standard Equipment: - Electrically powered height and tilt adjustment (0–46°) with automatic correction of cutting height during tilting - Eye-level, swiveling control panel - Double roller carriage, carriage length 3,000 mm - Manually adjustable rip fence with scale, including manual fine adjustment, max cutting width 1,000 mm - Crosscut fence with fixed 90° position, manually adjustable via scale up to 3,200 mm - Max saw blade projection: 150 mm - Max saw blade diameter: 450 mm - Drive power: 4 kW (5.5 HP) at 4,000 rpm - AKE main saw blade clamping system - Working height: 91 cm Motor 5.5 kW (7.5 HP) with VARIO F45: - Stepless speed control from 2,000–6,000 rpm Lsdpfew I Uxcjx Ah Ujta - Precise speed adjustment to the material increases cutting quality and blade service life Extended Cutting Height for Single-Side Tilting: - This option enables single-side tilting with a large extraction hood for max blade Ø 550 mm and a blade projection of up to 204 mm - In combination with a scoring unit: max blade Ø 500 mm / max cutting height 179 mm - Only available in conjunction with at least 5.5 kW (7.5 HP) drive power 2-axis Scoring Unit for Tilting: - With motorized height and lateral adjustment, programmable scoring blade height with quick lowering and raising - Drive motor 0.75 kW (1 HP), 8,200 rpm - Retrofitting only possible on machines prepared for the scoring unit LED Lighting: - Highly energy-efficient LED technology for clear marking of the scoring area The Altendorf double roller carriage is renowned for its smooth operation and precision run. It can be locked steplessly in any position. The large double rollers, precision-manufactured from hardened steel, ensure the upper carriage remains absolutely accurate in conjunction with the lower carriage on the hard-chromed guide bars. This running quality is maintained even after decades of heavy use and exposure to dirt. The carriage construction features a highly rigid, torsion-resistant multi-chamber design. The table surface is finely planed and anodized. A hard-chromed round bar in the upper carriage serves as both the mount for the cross-slide and the interface for various accessories. The entire unit is low-maintenance and does not require lubrication. On/Off Switch on Double Roller Carriage: - The on/off switch on the double roller carriage is always within easy reach. With four buttons, both the main saw blade and the scorer can be switched on and off, saving time and increasing safety. Angle/Mitre Fence, Crosscutting up to 3,500 mm: - This Altendorf-patented fence with integrated length compensation makes it easier to cut angles and mitres precisely in a single operation. In both positions, the swivel angle is steplessly adjustable by up to 49° and displayed on a scale. The play-free and robust stop flaps can easily be moved and adjusted as a single flap over the entire area up to max. 3,500 mm.

Condition: ready for operation (used), Year of construction: 2020, functionality: fully functional, cutting length (max.): 2,900 mm, saw blade diameter: 550 mm, power: 7.5 kW (10.20 HP), Altendorf F45 with comprehensive ElmoDrive control equipment! TECHNICAL DETAILS Carriage lengths and cutting lengths Carriage length (double roller carriage): 3,000 mm Cutting length with angle fence: 2,900 mm TIP-SERVO-DRIVE: 2,590 mm Maximum blade diameter: 550 mm Table extension: 840 mm Saw blade Saw blade diameter: 550 mm Saw blade projection at 90°: 204 mm Saw blade projection at +45°: 141 mm Ledpjwynhpjfx Ah Ujta MACHINE DETAILS Electrical data Motor power: 7.5 kW Voltage: 380–420 V Frequency: 50 Hz Circuit protection: 25 A Dust extraction connection Extraction top: 80 mm Extraction bottom: 120 mm Negative pressure: 1,200 Pa at connection, 140 mm Air consumption: min. 1,110 m³/h at 20 m/s Air cushion table Compressed air consumption: 200 l/min at 1 bar (max. 400 l/min at max. 3 bar) Dimensions Working height: 910 mm EQUIPMENT Template holder directly at the control Preparation for 2-axis scorer Extended cutting height with one-sided tilt

Condition: like new (used), Year of construction: 2020, functionality: fully functional, machine/vehicle number: 0-240-75-0703, input frequency: 50 Hz, type of input current: three-phase, Equipment: CE marking, NEW PRICE ONLY 99,000 EURO!!! Price valid only until December 31, 2025. Don’t miss this opportunity! Ltedpjw Exk Eefx Ah Usa We invite you to purchase a NEW and outstanding HOMAG SAW-TEC B-400 Pro Line panel saw—extended version with automatic storage handling capabilities. The SAWTEQ B-400 model is a HOMAG panel saw featuring automatic loading, capable of performing cuts at exceptional speeds. Designed for high-volume panel processing, the SAWTEQ B-400 ensures top-quality finish cuts and is distinguished by its reliability, precision, high power, and fast operating speed. The saw we offer is BRAND NEW. It was purchased from HOMAG POLSKA Sp. z o.o. in 2020 and delivered directly from the manufacturer to our facility. The machine was only started up by the HOMAG POLSKA Sp. z o.o. service team and has not been used since. In the industry, neither this model nor the Homag brand needs introduction—Homag is recognized globally as a leader in the production of state-of-the-art, high-quality equipment. Our model comes exceptionally well-equipped and is nearly fully loaded. For reference, a similar saw in the basic version costs between 100,000–110,000 EURO net (425,000–467,500 PLN net)*, while our extended model, compatible with automatic storage and additional equipment, costs around 190,000 EURO net (807,500 PLN net)*. Advantages: - High throughput enabled by automatic loading and substantial saw blade extension. - High efficiency with relatively low space requirements. - Designed for optimal material flow and precise logistics. - Engineered for integration with networked production processes. We maintain direct contact and support from the HOMAG manufacturer if installation and commissioning are required at the new owner’s site. We believe that the discount we offer—over 45% off the new price—provides an extremely attractive option for buyers seeking a modern saw compatible with automatic storage, or for those who may utilize this feature in the future. This translates to a saving of roughly 90,000 EURO net or approximately 400,000 PLN net*. The saw can, of course, also be operated without an automatic storage system. General terms of sale: - The machine is BRAND NEW, produced in 2020, but we do not provide a warranty or guarantee. - No returns are accepted. - The price quoted does not include VAT (23% for Polish buyers), which will be added to the invoice—please ensure you verify how we display pricing in the listing. - Single ownership. * Price in EUR converted at the NBP exchange rate – 1 EUR = 4.25 PLN. Welcome to all Machineseeker users. We are new to Machineseeker. Please note, we are not a furniture producer, manufacturer, or machinery trading company. We are a property developer in Warsaw (the capital of Poland) and own numerous properties locally. The machinery we list is our property, obtained through settlements with tenants from the furniture industry. We know the machines’ history and their condition matches our descriptions. We are in direct contact with the machines’ manufacturers—Homag, Otto Martin, OMC Machinery, and FANUM—for any additional support that may be needed. Since we do not require these machines, our prices are very attractive, especially as these machines are virtually unused. We can assist with transport anywhere in Poland or within the EU. We invite you to inspect the equipment before purchase. Kind regards.