Eccentric Press - Single Column

AMBOLD PEEV 40.4

Condition: good (used), Make: OMERA Type: R4 / 12-2 Year: 1976 Table length : 1900 Table width : 1000 Steady arm throath HOR : 670 Steady arm throath VER: 940 Stroke cylinder : 350 Column diameter : 200 Specifications Metric US Standard There are no specifications for this machine (yet). Dimensions (Estimate) Length 3000 mm Width 2200 mm Height 2500 mm Weight 2800 kg Please Note: The information on this page has been obtained to the best of our ability and belief, and from the manufacturers where possible. It is given in good faith, but its accuracy can not be guaranteed. Accordingly, it will not form a representation or constitute contractual terms. We advise you to check any vital details! Itjdpfxekvnume Agxog

Condition: used, Year of construction: 2014, functionality: fully functional, Make and Model: iDEAL BAS 340 Year of manufacture: 2014 Wood saw bands: From 25 × 0.6 mm to 120 × 1.2 mm Bimetal / tungsten-carbide saw bands: From 25 × 0.6 to 105 × 1.65 mm Stainless steel saw bands: From 25 × 0.5 mm to 50 × 0.8 mm Itedpfxjyr Idas Agxsg Band knives: From 30 × 0.4 to 120 × 1.1 mm Mild steel strip: up to 250 mm² Stainless steel strip: up to 150 mm² Clamping system: hydraulic Nominal power: 45.0 kVA (50% duty cycle) Dimensions (L × D × H): 1214 × 957 × 1982 mm Weight: 800 kg Control system: Central parameter control 99 program memory slots Servomotor-controlled jaw positioning 7-inch color touchscreen USB interface with Password protection Adjustable welding voltage Electronic piece counter Parameter deviation monitoring with automatic stop Hydraulic weld de-burring tool automatic system after welding Graphical annealing process display Infrared pyrometer with LED illumination and protection

Condition: new, pressure 25 t throat 200 mm Isdpeb U Hwpsfx Agxstg stroke 4 - 80 mm table surface area 520 x 400 mm no. of strokes 160 Hub/min ram surface 160 x 160 mm ram adjustment 40 mm ram hole 32 H7 mm hole in the table 200 x 150 mm clamping plate 500 x 380 x 60 mm total power requirement 2,7 kW weight of the machine ca. 1,9 t dimensions of the machine ca. 1,3 x 1,0 x 1,85 m

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF - with semi-automatic control - hydraulic pressure 40 to. Itjdpfxjqvm Uks Agxjg - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

Condition: new, Year of construction: 2022, feed rate X-axis: 20 m/min, feed rate Y-axis: 20 m/min, feed rate Z-axis: 15 m/min, overall weight: 7,400 kg, spindle speed (min.): 4,000 rpm, spindle speed (max.): 10 rpm, travel distance Y-axis: 1,500 mm, power: 22 kW (29.91 HP), DYAS Plate Drilling Center - DYAS PDC-1500 Number of Drilling Units 1 Vertical Motor Power 22 kW Spindle Torque 280 Nm Spindle Speed 10-4000 RPM Itedpfx Ajgbfaxogxog Automatic Tool Changing (ATC) 16 Units Maximum material weight 760 kg Max. Max. Drilling Capacity (mm) Ø40 mm

Condition: used, Year of construction: 1970, machine/vehicle number: 120895, pressure:63 t throat:250 mm stroke:8 - 100 mm no. of strokes:120 Hub/min table::715 x 500 mm dayligth:330 mm ram adjustment:63 mm clamping plate:700 x 480 mm hole in the table:240 mm Hole in clamping plate:110 mm dimension of ram:450 x 280 mm weight of the machine ca.:5,5 t Itedefx Hv Hspfx Agxog dimensions of the machine ca.:1,2 x 1,7 x 2,7 m hydraulic tilting single column eccentric press, tilting in 4 steps, opening to rear (325 x 500mm) and below (360x160mm) with central lubrication via hand pump, additional clamping plate 700 x 480 x 850 mm, two-hand operation, foot-trip operation possible, operating-mode selector for adjustment of continuous or single stroke, emergency cut-off, piece counter, various accessories

Condition: used, Gatter Saw Sharpening Machine Vollmer CNHV Year of manufacture: 1978 Gatter saw blade width: 60-160 mm Toothing length: max. 1450 mm Tooth pitch: 14 – 40 mm Tooth height: max. 25 mm Rake angle: 0° - 30° Blade thickness: 0 – 6 mm Grinding wheel: diameter 200 mm Working speed: 30, 50, 75 teeth per minute Tooth forms: 3 pcs Itjdpfx Asxvz R Hjgxsg Connected load: 2.1 kW Weight: 500 kg Including gatter saw set device Lorroch SGB 6 (similar to Meinert PH6D) year 1983

Condition: ready for operation (used), Erfurt Trimming press PKZe 500/1000 Ijdpfxsvbcxts Agxstg Power 500 to Table dimension 1020x1420 mm Stroke 400 mm No of strokes / min - 12 Main motor 41kw Movie available

Condition: used, Year of construction: 1980, machine/vehicle number: A-07/471A, sheet width - max.:130 mm straightening roll diameter:40 mm :5 :2+2 sheet thickness - min.:0,4 mm sheet thickness - max.:3,5 mm weight:0,4 t dimensions of the machine ca.:0,6x0,65x1,15 m with integrated, stepless adjustable Vari-drive, reversing, operating-mode switch for manual and automatic operation, introduction roller cage, position indicator of straightening rolls via analogue display, adjustment of straightening rollers via hand wheels, automatic swivel arm control, very good condition Iedpfjcxxx Rox Agxstg

Year of construction: 2025, condition: new, - Panel width 710 mm - Backgauge Itedpfx Ash Ramgsgxog - Adjustable stroke