Arburg 820 S 4000-3200 (2005)

Arburg 820 S 4000-3200

Condition: ready for operation (used), Year of construction: 2005, clamping force: 4,000 kN, overall weight: 22,500 kg, Hydraulic injection moulding machine manufactured in 2005. This Arburg SELECTA 820 S 4000 - 3200 features a clamping force of 4000 kN and an opening stroke of 700 mm. The machine has a platen size of 1171 x 1171 mm and a maximum moving platen weight of 4500 kg. If you are looking to get high-quality injection moulding capabilities, consider the Arburg SELECTA 820 S 4000 - 3200 machine we have for sale. Contact us for further details. • Quantity available: 4 Hsdey A Ny Ejpfx Af Tjff • Clamping unit: • Opening force: 100 kN • Opening stroke: 700 mm • Minimum mould height: 350 mm • Maximum daylight: 1550 mm • Tie bar spacing: 820 x 820 mm • Platen size: 1171 x 1171 mm • Max. moving platen weight: 4500 kg • Ejector force: 100 kN • Ejector stroke: 250 mm • Injection unit: • Screw diameter: 70 / 80 / 90 mm • Screw L/D ratio: 23 / 20 / 18 • Max. screw stroke: 320 mm • Shot volume: 1323 / 1608 / 2036 cm³ • Max. shot weight (PS): 1215 / 1469 / 1860 g • Injection pressure: 2500 / 2000 / 1530 bar • Injection rate: 304 / 396 / 502 cm³/s • Plasticizing capacity: 1188 / 1552 / 1964 g/s • Screw speed: 350 rpm • Screw peripheral speed: 65 / 75 / 80 m/min • Screw torque: 2247 Nm • Nozzle contact force: 110 kN • Nozzle stroke: 600 mm • Drive and power: • Hydraulic pump motor: 55 kW • Total installed power: 96.2 kW • Heating: • Cylinder heating capacity: 6 zones (5500 + 4300 W) • Nozzle heating: 1250 W • Oil tank capacity: 590 l

Year of construction: 2005, condition: ready for operation (used), There are two BOY 55M available, both year of construction 2005. Clamping force: 550kN, screw diameter: 38mm, stroke volume: 196cm³, injection pressure: 2000bar, platen dimensions: 565mm/540mm, tie bar distance: 360mm/335mm. Workpiece height min./max.: 250mm/650mm, opening stroke: 400mm, max. platen distance: 1050mm, ejector stroke: 80mm, max. mold weight: 600kg. Dimensions X/Y/Z: approx. 3300mm/1200mm/2100mm, weight: approx. 2300kg, operating hours: 29664h, control: Procan MD. Robot interface Euromap 12 included. Hodpfotyaypex Af Teff

Condition: used, D-6886-Delford Type SP 800 Hfsdpjc Nlxpsfx Af Tjf Delford SP800, Film wrapping machine, Packing materials: stretch films 12,5 – 25 micron (50-100 gauge) P.V.C. or any suitable heat sealable types. Max. roll with 450 mm, max. roll dia. 250 mm. Speed of operation: 40 – 80 packs per minute. Max. Packs sizes: L 300 mm, W 200 mm, H 120 mm, Girth 420 mm, Min. Packs sizes: L 130 mm, W 90 mm, H 10 mm, Girth 200 mm, Dimension: 5290 x 1049 x 1430. Machine weight: approx. 1400 kg.

Condition: excellent (used), Year of construction: 2007, operating hours: 53,000 h, functionality: fully functional, machine/vehicle number: 206432, clamping force: 2,000 kN, screw diameter: 50 mm, clearance between the columns: 570 mm, displacement volume: 392 cm³, injection pressure: 2,000 bar, ejector stroke: 225 mm, overall weight: 7,450 kg, Equipment: documentation/manual, Here we, as a dealer in injection moulding machines, are offering the following well-maintained used injection moulding machine: Of course, we also purchase well-maintained injection moulding machines manufactured from 2010 onwards. We have been a wholesaler of used injection moulding machines for over 25 years. Current note – Tax notice and advantage for used machines: As of 01.07.2025, used machines will also be eligible for a special depreciation of 30% annually for tax purposes. Manufacturer: Arburg Model: 520C 2000-800 GE Serial number: 206432 Year of manufacture: 2007 Operating hours: approx. 53,000 Control system: Selogica Dimensions (L/W/H): 5.53 x 1.80 x 2.20 m Weight: 7,450 kg Functional condition: Fully operational Condition: Very well-maintained – German origin Extras: - Thermoplastic cylinder complete, 50 mm, highly wear-resistant - Screw in HC version instead of standard - Selogica direct control - Hydraulic system with 2 variable-displacement pumps - Anniversary model GOLDEN EDITION - Thermoplastic processing - Open nozzle 50 mm - Nozzle tip 50 mm extended - Heating band for open nozzle - Heating band for extended nozzle tip - Central clamping platen set 570, center Ø 125 mm - 2-piece air blast device with pressure regulator - Air blast device connection 1 - Selector unit connection - Core puller 1 for serial motion holding pressure via check valve - Conveyor belt connection via 5-pin socket - Robot interface (per EUROMAP 67), 50-pin - ARBURG host computer interface - Additional socket distributor: 1x CEE, 1x Schuko - Serial printer interface USB - CompactFlash interface for data set storage - Operation authorization with chip card per EUROMAP 65 - 1 additional heating control circuit for nozzle or adapter with socket - Dosing unit interface - Free cooling circuits, manually adjustable - Machine-specific cooling circuits controlled - Extended monitoring package - Extended motion package - Production control package - Optimization / operator assistance package - Quality assurance package - Documentation package Complete documentation included. Injection unit: Screw diameter: 50 mm Shot weight: 359 g/PS Injection pressure: 2000 bar Shot volume: 392 cm³ Clamping unit: Clamping force: 200 t / 2000 kN Tie bar spacing: 570 x 570 mm Mounting plates: 795 x 795 mm Mould installation height: 300 mm Max. platen distance: 950 mm Opening stroke: 650 mm Ejector stroke / force: 225 mm / 66 kN Clamping unit: hydraulic Motor power: 22 kW Heating power: 19.9 kW / 8 heating zones Hfedpjw Tt R Isfx Af Tef Total connected load: 45 kW The machine is available for immediate delivery at our warehouse in Hannover, Germany and has been tested. Warranty: Warranty until initial commissioning. Loading/shipping: Free loading onto the buyer's truck or free delivery within Germany (freight charge applies) Available from our warehouse in Hannover, Germany. For your information regarding our machines and company: - We sell only our own machines purchased from ongoing production at our Hannover warehouse. - All listed machines are inspected and tested prior to removal. - We do NOT sell insolvency assets – we are NOT brokers handling third party property. - All offered machines come from successful businesses where proper maintenance is standard practice. - All machines offered are available for viewing at our warehouse.

Condition: excellent (used), Boy 80M Year 1998 Closing 80 tons Scrow 36 mm Hjdpfxsmt Hh Ee Af Tjff Spray weighted 132 g spar distance 41x 35,8

Condition: used, Year of construction: 2005, travel distance X-axis: 1,020 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 600 mm, controller model: Heidenhain iTNC 530, total height: 2,770 mm, total length: 3,300 mm, total width: 2,687 mm, The Micron VCE 1000 Pro is a powerful and precise CNC machining center designed for demanding milling tasks. With travel distances of 1020 x 560 x 600 mm, it enables flexible machining of medium-sized workpieces. The machine is equipped with a Heidenhain iTNC 530 control, an ISO 40 tool taper, and a spindle speed of up to 10,000 rpm, making it ideal for high-precision, high-speed machining. Hfodpfxsxyig Re Af Tsf The robust table with a 1000 x 560 mm T-slot area supports workpieces up to 1,350 kg. Fitted with a chip conveyor, coolant pump, and a 18.5 kW motor, the VCE 1000 Pro offers a reliable combination of power and precision.

Condition: good (used), Year of construction: 2000, 20000 rpm, Hodpfx Afer Urm Se Toff tool measurement on table will come, Parts shown by hand not come.

Condition: good (used), Year of construction: 2002, Format trimmed: max 300 x 400 mm, min 85 x 115 mm Untrimmed format: max 320 x 460 mm, min 100 x 125 mm Output: max 6,600 c/h Equipment: - Fully automatic infeed with integrated stack counter - Cut counter - Cutting blower - 1 set of pressing plates and holders - 1 set of plate tables - 3 sets of cutting bars - 2 sets of knives - External device for knife change with setting gauge - Central lubrication - Operating instructions - Electrical circuit diagrams - Standard tools Hfedpfsqqkvqsx Af Tjf - Standard accessories

Year of construction: 2014, condition: ready for operation (used), Clamping force: 1600kN, weight: 9t, operational hours counter: 3638h, with Handling Robot ENGEL viper 20. Hfsdpfx Ajh Nypfef Tjf

Condition: good (used), Year of construction: 1997, travel distance X-axis: 1,000 mm, travel distance Y-axis: 750 mm, travel distance Z-axis: 750 mm, CNC control Heidenhain TNC426 30-fold tool changer electronical handwheel chip screw coolant device Technische Daten / technical details: Verfahrweg X / X-Travel 1000 mm Verfahrweg Y / Y-Travel 750 mm Verfahrweg Z / Z-Travel 750 mm Tischgröße / table size 1150x700 mm Werkzeugschaft / spindle taper SK40 Drehzahlbereich / spindle speed 12000 UpM /rpm Anzahl der Werkzeugplätze / tool places in ATC 30 Gewicht der Maschine ca. / weight ca. 10500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Hjdpfxjua S Hrs Af Tjff Technical data, accessories and description of the machine are not binding.