ARBURG A 470 H (S&P 3796)

ARBURG A 470 H (S&P 3796)

Condition: like new (used), Year of construction: 2016, Wittmann Battenfeld Eco Power 110/130 Unilog B6P electric (2016) Clamping force: 110 t Screw diameter: 22 mm Shot volume: 41 cm3 Screw L/D ratio: 20 Fedpfx Aheu Eki Sjpjpi Calculated stroke volume : 41,8 cm3 Correct injection pressure : 2,864 bar Max. screw speed : 500 min Screw tongue : 150 Nm Nozzle path contact force : 250/40 mm/kN Injection flow outside : 76 cm3/s Cylinder heating capacity : 6,3 kW Number of heating zones : 4 Working hours: 35.953 hours Type: Horizontal Drive: Electric

Year of construction: 2021, condition: ready for operation (used), An almost like-new injection moulding machine Arburg is available. Clamping force: 1600kN, tie bar distance: 520mm, clamping stroke: 364mm, ejector stroke: 150mm, ejector force: 40kN, injection unit: 400, injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 6000mm/1800mm/2200mm, weight: approx. 6000kg, control: Selogica, operating hours: approx. 67h. Includes enclosure with clean air supply FilterFanUnit and removal robot. Documentation available. An on-site inspection is possible. Fodpfow Rqwtjx Ahpopi

Condition: ready for operation (used), Year of construction: 2021, operating hours: 67 h, clamping force: 1,600 kN, screw diameter: 45 mm, overall weight: 5,900 kg, controller manufacturer: ARBURG, controller model: SEOLOGICA direct, This 3-axis Arburg Allrounder 520S 1600-400 was manufactured in 2021. It features a screw diameter range of 35-45 mm and a clamping force up to 1600 kN. The machine includes a removal robot and an enclosure with a FilterFanUnit, ensuring clean operations. Ideal for precision plastic processing, it offers a mold clamping height of 250 mm and platen spacing of 825 mm. Contact us for more information about this machine. Additional equipment • Cooling water connection: Max. temperature: 30 °C, Min. Δp: 1.5 bar | DN 25 Machine Benefits Technical Machine Benefits • Thermoplastic cylinder: 45 mm, high wear resistant • CrN coating (screw and non-return valve) • Standard screw coupling, square geometry • Open nozzle 45 mm • Larger holding pressure pump • Selogica direct control system • Technology level 2, servo-controlled with 2 control pumps • Ejector pressure P/Q controlled • Continuous oil cooling and filtration • Nozzle contact force controlled, programmable (1st injection unit) • Clamping plate set, central 125 mm • Machine raised by 100 mm (increased vibration elements) • 8 programmable digital inputs/outputs • 6 electric mould heating control circuits • 1 additional heating control circuit (nozzle or adapter) • 4 manually adjustable cooling circuits • Controlled machine cooling circuits • aXw Control ScrewPilot (1st injection unit) • Water-cooled control cabinet • Reinforced screw coupling with multi-spline geometry • Injection speed with ramp function (F90302 = 1) • Automatic heater standby switching • Sound pressure level: 70 db(a) | ± 3 Extra Information • Screw Diameter: 45 mm Fodpfx Ajx D E Dyehpepi • Injection Pressure (Max.): 1580 bar • Shot Weight (Max. g PS): 232 g • Heating Output 9.7 kW | 5 zones • Net Machine Weight: 5900 kg

Year of construction: 2012, condition: good (used), robot 40 RC 200 X= 700mm Y= tandem 1600mm Z= 3320mm B + C Servo year: 2012 Fjdpfx Asgkvtxehpjpi price: 8.900€ contact person: Mr. Rainer Eckerle

Condition: excellent (used), Hurco VMX50i (2014) 3-Axis Vertical Machining Centre Control: Hurco WinMax Travels & Capacity X Axis Travel: 1270 mm Fodpfxjyx H Rte Ahpopi Y Axis Travel: 660 mm Z Axis Travel: 610 mm Table Size: 1500 x 660 mm Max Table Load: 2000 kg

Condition: ready for operation (used), Year of construction: 2018, clamping force: 400 kN, screw diameter: 30 mm, injection weight: 79 g, Hydraulic injection moulding machine manufactured in 2018. This Arburg ALLROUNDER 270 S 400-100 features a maximum clamping force of 400 kN and offers screw diameter options of 15 mm, 20 mm, or 30 mm. It has a maximum injection pressure of 2,500 bar for the smaller screws and a maximum shot weight of 79 g for the largest. If you are looking to get high-quality injection moulding capabilities, consider the Arburg ALLROUNDER 270 S 400-100 machine we have for sale. Contact us for further details. • Tie bar distance: 270 mm • Injection unit: size 100 (per EUROMAP) • Operating hours: 4,261 h (automatic) • Screw diameter options: 15 / 20 / 30 mm • Max. swept volume: 18 cm³ (15 mm), 31 cm³ (20 mm), 71 cm³ (30 mm) • Max. shot weight (at 1.15 g/cm³): 20 g (15 mm), 35 g (20 mm), 79 g (30 mm) • Max. injection pressure: 2,500 bar (15/20 mm), 1,390 bar (30 mm) • Centering diameter: 125 mm Fpedpfsy Nkwljx Ahpji • Vacuum pump capacity: approx. 25 m³/h • Pneumatic flow rate: 1,000 l/min per circuit • Heating capacity per control circuit: 3.6 kW / 230 V (16 A fuse) • Drive motor voltage: 380–480 V (50–60 Hz)

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, travel distance X-axis: 1,050 mm, travel distance Y-axis: 560 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 40,000 m/min, rapid traverse Y-axis: 40,000 m/min, rapid traverse Z-axis: 32,000 m/min, controller model: Okuma OSP-P300MA-e, table width: 560 mm, table length: 1,300 mm, overall weight: 7,500 kg, Travel X-axis travel: 1,050 mm Y-axis travel: 560 mm Fsdpfjzf A R Hex Ahpspi Z-axis travel: 460 mm Distance from table surface to spindle nose: 150 – 610 mm Distance from column front to spindle center: 720 mm Table Dimensions: 560 x 1,300 mm Working area: 560 x 1,300 mm Table surface: 4 T-slots (width: 18 mm, pitch: 125 mm) Distance from table surface to floor: 800 mm Max. table load: 900 kg Spindle (Cabezal) Spindle speed: 50 – 15,000 rpm Speed ranges: Two ranges, infinitely variable speed Motor: 22 / 18.5 kW (10 min / continuous rating), VAC type Torque: 199 N·m Spindle taper: 7/24 taper, No. 40 Spindle bearing inner diameter: 70 mm Feedrates (Avances) Rapid traverse rate (X, Y axes): 40,000 mm/min Rapid traverse rate (Z axis): 32,000 mm/min Cutting feedrate (X, Y, Z axes): 1 – 32,000 mm/min Automatic Tool Changer - ATC Changer type: Twin-arm type (Double-arm) Tool shank: MAS BT40 Retention knob (Pull stud): MAS Type 2 Magazine capacity: 32 tools, random memory Max. tool diameter (adjacent): Ø 90 mm Max. tool diameter (without adjacent tools): Ø 125 mm Max. tool length: 300 mm Max. tool weight: 8 kgf Dimensions and Weights Machine height: 2,750 mm Floor space (Footprint): 2,470 x 3.105 mm Machine weight: 7,500 kgIncluded Options Chip conveyor: MAYFRAN MT 10 (Rear side discharge) Coolant through spindle - CTS: (15 bar, 20 L/min) Workpiece measurement probe: RENISHAW Tool length measurement and breakage detection probe: RENISHAW Tool Life Management function Helical cutting function Rigid tapping DNC-T1

Condition: used, Year of construction: 2011, functionality: fully functional, travel distance X-axis: 760 mm, travel distance Y-axis: 440 mm, travel distance Z-axis: 460 mm, rapid traverse X-axis: 24 m/min, rapid traverse Y-axis: 24 m/min, rapid traverse Z-axis: 24 m/min, feed rate X-axis: 10 m/min, feed rate Y-axis: 10 m/min, feed rate Z-axis: 10 m/min, controller manufacturer: Fagor, controller model: 8055 iA/MC, total height: 2,500 mm, total length: 2,200 mm, total width: 2,100 mm, table width: 410 mm, table height: 820 mm, table length: 900 mm, table load: 350 kg, overall weight: 3,630 kg, spindle speed (max.): 8,000 rpm, coolant supply: 2.7 bar, number of slots in tool magazine: 16, tool length: 300 mm, tool diameter: 100 mm, tool weight: 8,000 g, type of input current: three-phase, Equipment: chip conveyor, documentation/manual, Used machining center – Micromill MM 430 - Control system: Fagor - Spindle – 8000 rpm – mount DIN 69871 40 ISO - Semi-automatic with manual feed control - Automatic with cycle function - DIN ISO programming - 10.4" color display - Large memory for created programs - Motorized spiral chip conveyor system - Tool changer (carousel) for 16 tools - Linear roller guides in all 3 axes - Automatic central lubrication - Spindle orientation - Work table, precision-ground with 4 T-slots Fodpszc Htuofx Ahpepi - Precision-ground ball screws in all 3 axes - Complete machine enclosure with 2 front sliding doors - Coolant system with chip flushing system - Telescopic guide rail cover for all 3 axes - Low-voltage system - Oil separator - Rigid tapping - Servo motors (direct drive) for feeds - Electronic handwheel for all 3 axes - Ethernet connection - Spindle blow-out function - Work area lighting The machine can be inspected under power at any time.

Condition: used, Year of construction: 1980, pressure:24 t table length:1060 mm table width:650 mm Fpsdpfx Aheufufbspsi Smallest opening:165 dimensions of the machine ca.:1300 x 700 x 1500 mm This Millutensil die spotting / tryout press has a capacity of 24 tons, this machine you can use for die en mould spotting press. This kind of machines are used for splitting, adjusting, maintenance and try-out operations on dies and moulds. This machine is produces by Millutensil s.r.l. in Italien.

Condition: new, Year of construction: 2025, functionality: fully functional, travel distance X-axis: 1,000 mm, travel distance Y-axis: 550 mm, travel distance Z-axis: 500 mm, spindle speed (max.): 12,000 rpm, Work area Travel range X: 1,000 mm Travel range Y: 550 mm Fjdpfx Ahozf Hupjpopi Travel range Z: 500 mm Clamping area (L x W): 1,100 x 502 Table load: 700 kg Spindle Speed: 12,000 rpm Power: 20.9 kW (25% duty cycle) Torque: 178 Nm (25% duty cycle) Tool holder: BBT 40 (conversion to SK 40 possible) General Tool changer: 30-position (double gripper) Machine bed: High-strength Meehanite casting Rapid traverse rate: 36 / 36 / 30 m/min Equipment Chip management: Chip conveyor incl. chip flushing in the work area Coolant management: Internal coolant supply (IKZ 30 bar) Cooling air: Programmable external cooling Temperature management: Cooling unit for spindle oil Run-in assistance: Electronic handwheel Network connection: Ethernet interface 4th axis: PLC-side preparation Conversion kit to SK 40: Included