Engine/lead screw lathe, lathe

AYEL-TECH C6236/1000

Condition: like new (used), functionality: fully functional, Weiler Commodor Lead and Feed Screw Lathe with 3-axis K&C Digital Readout, newly overhauled, with acceptance protocol for tolerances equivalent to new machines. Technical Data: >> Machine Serial No.: 2268-87 >> Centre Height: 180 mm >> Distance Between Centres: 1000 mm >> Spindle Speeds: from 13 to 2000 rpm >> Spindle Bore: 56 mm >> Short Taper Spindle Nose DIN 55029 Camlock >> Tailstock Morse Taper 4 >> Feed Rates: 0.026 to 0.888 mm/rev >> Thread Cutting Capability: Metric, Inch, Module, and Diametral Pitch >> Metric Thread Pitches: 0.35 to 12 mm >> Weight: approx. 1500 kg >> Spindle Brake can be engaged >> Drive Power: 2.0/4.0 kW >> Dimensions (LxHxD): 2.2 m x 1.5 m x 1 m Equipment and Accessories: >> 3-axis K&C Digital Readout, new, with 12-month manufacturer’s warranty and manual >> NEW 3-jaw chuck, 200 mm, with 2 sets of jaws >> Multifix size B with 3 new tool holders >> Bed stop >> Machine feet >> Coolant system >> LED machine light Safety Features: >> Electronic spindle guard >> Spindle brake >> 2 emergency stops Optional: Lead and feed screw covers available on request Bsdpoymznhjfx Am Tswr About the machine: For sale is a Weiler Commodor lead and feed screw lathe in geometrically overhauled condition. The ways have been reground or hand-scraped. Acceptance is according to inspection protocol. Finished in 2K gloss white paint. Multifix toolpost and chuck are new. For safety: The machine is equipped with a brake motor, electronic spindle guard, and two emergency stops, making it an as-new lathe. Even at high spindle speeds, the Weiler runs very smoothly. This newer generation of Weiler lathes is extremely user-friendly and is capable of producing ground-like surface finishes. Take advantage of the opportunity to inspect the machine under power on-site and see its condition for yourself.

Condition: ready for operation (used), Year of construction: 2012, operating hours: 7,474 h, travel distance X-axis: 508 mm, travel distance Y-axis: 406 mm, travel distance Z-axis: 356 mm, controller manufacturer: HAAS, table load: 227 kg, spindle speed (max.): 10,000 rpm, number of axes: 3, This 3-axis HAAS Mini Mill 2 was manufactured in 2012. It features an X-axis travel of 508 mm, Y-axis travel of 406 mm, and Z-axis travel of 356 mm. The machine includes a table size of 1,016 × 356 mm and a maximum table load of 227 kg. If you are looking to get high-quality machining capabilities, consider the HAAS Mini Mill 2 vertical machining centre we have for sale. Contact us for further details. • Table: • Size: 1,016 × 356 mm • T-slots: 3 × 16 mm • T-slot spacing: approx. 110 mm • Feed rates: • Max cutting feed: 12.7 m/min • Rapid traverse: 15.2 m/min • Electrical: Bodpfxjzbh U Ds Am Tewr • Power supply: 360–480 V / 3 Ph / 50–60 Hz Technical Specification Taper Size BT 40

Condition: like new (used), Year of construction: 2020, functionality: fully functional, Center height 230 mm Center distance 1500 mm Swing diameter over bed 465 mm Swing diameter over cross slide 270 mm Swing diameter in bed bridge 690 mm Bed bridge length 240 mm Spindle bore diameter 58 mm Spindle head CAMLOCK D1-6 Spindle bore taper Morse 6 Speed ​​range 25 – 2000 rpm (12 speeds) Tailstock taper Morse 4 Tailstock sleeve travel 128 mm Motor power 5.5 kW Machine weight 1720 kgs Machine dimensions: 2700 x 1080 x 1370 mm Accessories - 3-axis DRO system - 3-jaw chuck - 4-jaw independent chuck - Faceplate - Steady rest - Traveling rest - Wrenches - Cooling water equipment - MULTIFIX knife holder with inserts - Tool case - Tools, wrenches - Cutting tools - Manuals and CD Bjdey Duy Hepfx Am Tjwr The lathe is in near-new condition and has hardly been used. It is powered up in our workshop.

Condition: excellent (used), Year of construction: 2005, functionality: fully functional, machine/vehicle number: 0500071, SPECIFICATION Table Size 600 x 320mm X axis traverse 450mm Y axis traverse 350mm Z axis traverse 380mm Spindle BT40 Spindle Speeds 0-8000rpm Spindle Motor 10kW Rapid feed rates all axes 30m/min Toolchanger capacity 12 Tools Toolchanger change time 8 Seconds Approximate Weight 2000Kg   Bwsdpfx Amstylazs Tjr Machine equipped with:- Siemens 810D Shopmill CNC Control Swarf auger Lighting Coolant system Enclosed guarding

Condition: used, machine/vehicle number: 1 284 066, Feed diameter: 200 mm Through-hole: 50 mm Mounting, short taper according to DIN 55027: Size 6 Outer diameter of the clamping cylinder: 290 mm Overall height (clamping cylinder to the front of the chuck, without jaws): 150 mm Bsdpocm Tgkofx Am Tjwr pneumatically actuated

Condition: reconditioned (used), Year of construction: 2015, functionality: fully functional, With 3-axis digital display Year of manufacture: 2015 Spindle bore: 54 mm Distance between centers: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm, stepless speed control with display on screen Including the following accessories: Multifix tool holder Coolant system Three-jaw chuck Ø 200 mm Four-jaw chuck Ø 250 mm Collet chuck complete with collets up to Ø 32 mm Chuck guard Chip guard with lighting Fixed steady rest Ø approx. 150 mm Travelling steady rest Ø approx. 100 mm Bwodpfx Ameyybxnj Tsr 4 pcs. height-adjustable machine feet 1 pc. live center Operating manual

Condition: new, Bernardo Standard 165 D Lead and Feed Lathe Technical Specifications Distance between centers: 1000 mm Distance between centers over bed: 350 mm Distance between centers over cross slide*: 450 mm Distance between centers over compound slide: 190 mm Bed width: 180 mm Spindle bore: 40 mm Spindle mount: DIN 55029, D1-4 Speed range: (8) 70 - 2000 rpm Range of longitudinal feeds: (40) 0.053 - 1.29 mm/rev Range of cross feeds: (40) 0.013 - 0.31 mm/rev Metric threads: (32) 0.4 - 7 mm Inch threads: (36) 4 - 60 TPI Tailstock travel: 110 mm Tailstock mount: MK 3 Motor output power: S1 100% 1.5 kW (400 V) Motor input power: S6 40% 2.2 kW (400 V) Machine dimensions (W x D x H): 1730 x 700 x 1340 mm Weight approx.: 514 kg * Bed length can be extended Scope of delivery • 3-axis digital display i200 with LCD • 3-jaw chuck DK11-160 mm / D4 • Faceplate 200 mm / D4, according to DIN 55029 • Fixed steady rest – bore diam. max. 60 mm • Follow rest – bore diam. max. 60 mm • Clamping plate 250 mm • Four-way tool holder • Shaft locking device • Protective device for tool holder • Slip clutch • Micrometer length stop • Coolant system • Extendable chip tray • Motor with magnetic brake according to CE standard • Foot pedal with braking function according to CE • Splash guard • Threading dial • LED machine light • Reducing sleeve Bwedpod Ri Ezjfx Am Tjr • Change gears • 2 centering points • Base frame • Operating tools

Condition: used, Manual lever lathe SCHAUBLIN Type 102 Precision mechanic lathe Machine no. 208322 Year of manufacture: approx. 1970 Total bed length: 650 mm Center height over bed: 102 mm Center height over carriage: 53 mm Bwodpfew Iq Umex Am Tor Medium spindle speed: approx. 2,800 rpm (3 speed stages) Drive motor: 0.37 kW, 2800 rpm Power supply: 380 Volt, 50 Hz - Manual lever parting and grooving slide with precisely adjustable stops - Tool holder with precise height adjustment - Collet chuck device (only one collet included) - Speed change by shifting the drive belt Space requirement with stand: L x W x H 1150 x 600 x 1200 mm Weight with stand: 130 kg Good condition

Condition: new, Year of construction: 2025, functionality: fully functional, machine/vehicle number: ZCVS250, total width: 1,100 mm, total height: 950 mm, overall weight: 350 kg, input voltage: 380 V, warranty duration: 24 months, nominal power: 1.13 kW (1.54 HP), power: 1.13 kW (1.54 HP), workpiece width (max.): 190 mm, workpiece length (max.): 190 mm, Equipment: CE marking, ZCVS 250 CIRCULAR TYPE OF VIBRATORY MACHINE * Net 250 liter volume (Capacity between 125lt to 1250lt is available up to request) * Highly wear resistant P.U.Lining (90 Shore) * Dosing pump included. * Changeable valf for the wastewater decharging *According to requested diameter size for seperator MOTOR: * High performance three phase current drive motor. * 1,1 kW 1500 rpm (Italian OLI) * The motor is lubrication free. You don’t need motor lubrication. CONTROL PANEL: * Main switch and emergency stop switch. * Timer and working hours timer * Control box with switch for engine right/left running * CE safety standard PAINTING: *Colour in RAL 5003 & RAL 7001 Bjdpfx Amsrkmv Sj Tewr *Epoxy paint is used to ensure long life of the paint.

Condition: used, steel cabinet with diverse SK 40 toolholders Bwsdevb Dl Ijpfx Am Ter *