Workshop press

AYEL-TECH WP-HD 160

Condition: new, functionality: fully functional, Fervi T047/400VDA Gear-Driven Milling and Drilling Machine with Tapping 400V 1.5kW BRAND NEW “CE” CERTIFIED Promo price – single unit available while stocks last. The machine can be used for: Milling Drilling Tapping Drilling capacity in cast iron (with pilot hole): ø 40 mm Max drilling capacity in steel (with pilot hole): ø 32 mm Milling capacity with indexable cutter: ø 80 mm Milling capacity: ø 25 mm Tapping capacity: Ø 22 mm Taper: MT 4 Quill stroke: 130 mm Quill diameter: ø 76 mm Column diameter: ø 115 mm Head tilt: ± 60° Spindle speed: (12) 75 ÷ 3200 rpm Three-phase motor: 400 V 50 Hz 1.1 – 1.5 kW Table dimensions: 585 x 190 mm T-slot: 12 mm Base dimensions: 648 x 412 mm Overall dimensions: 740 x 790 x 1960h mm Weight: 390 kg. Hedjg Npiwspfx Apnjfg

Condition: good (used), Year of construction: 1988, operating hours: 9,999 h, functionality: unexamined, overall weight: 3,500 kg, fuel type: diesel, color: blue, output voltage: 400 V, output frequency: 50 Hz, nominal power: 360 kW (489.46 HP), nominal power (apparent): 450 kVA, total length: 3,200 mm, total width: 1,340 mm, total height: 1,800 mm, rotational speed (max.): 1,500 rpm, type of cooling: water, Brand: Mercedes Benz - Stamford Model: 450 kVA diesel generator Year of manufacture: 1988 Serial number: On request Operating hours (read): Unknown Capacity (kVA): 450 Capacity (kW): 360 Engine brand: Mercedes Benz Engine model: OM444A Fuel: Diesel Alternator brand: Stamford Hfodpfxjydk Dgo Apnsg Alternator model: HC534C Voltage: 220 - 380 V Frequency (Hz): 50 RPM: 1500 Amperes (A): 684 Dimensions LxWxH (mm): 3200 x 1340 x 1800 Weight (kg) approx.: 3500 Units in stock: 1 Manufactured in: Germany Comments: Really good visual condition, operating hours unknown, twin turbo.

Condition: good (used), Year of construction: 1962, High speed radial drilling machine, radial drilling machine, drilling machine, boom drilling machine, high speed radial drilling machine -Clamping table: 400 x 1100 mm Hodpfxsirax Uo Apnjfg -Projection: 930 mm -Taper mount: MK4 -Engine power: 1.35/1.8 kW -Speed: 41-1700 rpm -Columns: Ø 200 mm -Spindle stroke: 125 mm -Thread cutting device: YES -Feed: 0.075 - 0.3 mm/rev -Dimensions: 1800/1235/H2240 mm -Weight: 1500kg

Condition: used, Pillar drilling machines Hodpfx Aob N Ezrepnefg

Condition: new, capacity 90 degrees: round 240 mm capacity 90 degrees: square 240 mm 165 x 310 mm saw band length 2725 x 27 x 0,9 mm mm table height 890 mm band speed 35 / 70 m/min total power requirement 1,1 kW weight of the machine ca. 0,35 t Dimensions (LxWxH) 1,7 x 0,75 x 1,8 m The Z252/DG has the following equipment: - hydraulic cylinder, - emulsion pump, Hsdpfx Apehpktvsnofg - eccentric clamp, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use.

Condition: used, Year of construction: 1982, spindle diameter 90 mm x-travel 900 mm y-travel 900 mm z-axis 1200 mm w-axis 800 mm table surface area 900 x 1200 mm rotation movement 360 Grad table load 6,0 t turning speeds 25 - 1400 U/min spindle taper ISO 40 voltage 380 V / 50 Hz drive milling spindle 9,2 kW total power requirement 35 KVA weight of the machine ca. 10 t dimensions of the machine ca. 4,5 x 2,8 x 2,5 m • Machine had been completely refurbished in 1994 by the manufacturer • new switch cabinet, • new Servo-drive BOSCH and HEIDENHAIN-control TNC 360,(3D control) • valve plate Ø 600 mm. • traverse distance: 150 mm Hjdpfjtv H Ucox Apnefg The machine is currently not ready for demonstration due to a fault in the electrical system.

Condition: new, Year of construction: 2023, Horizontal bending machine AH 40 - ZOPF Hfodjqvm Ukspfx Apneg - with semi-automatic control - hydraulic pressure 40 to. - length of stroke - bending speed adjustable - max. working speed 10 mm/sec. - return speed 20 mm/sec. - hydraulic pressure adjustable - maximum bending high 250 mm - motorcapacity 3,0 KW - 400 V 50 hz 3 ph. - working height 900 mm - closed table - replaceable wear plate - weight 950 kg - bending capacity: flat material max. 150x22 mm round tube up to 60 mm

Condition: new, Year of construction: 2026, For sawing e.g. stainless steel, tool steel, hollow sections and solid materials Two-pole drive motor enables saw band speeds of 30 and 65 m/min Monitoring of saw blade tension electromechanically via microswitch When the saw arm is raised, the lowering cylinder locks in the upper position via the solenoid valve - additional locking at the cylinder is therefore not required Saw arm inclined by 25°, thus longer service life of the saw band Precise and robust band guides with adjustable HM plates After completion of the cutting process the saw band stops automatically in the lower end position Lowering of the saw arm by gravity or manually With infinitely adjustable, constant saw arm lowering speed via hydraulic cylinder Dimensions and weights Hjdpfeg U Uv Rox Apnefg length approx. 1200 mm width/depth approx. 650 mm height approx. 1800 mm Weight approx. 270 kg Electrical data Supply voltage 400 V Mains frequency 50 Hz Machine data Saw band speed(s) 30 / 65 m/min Speed levels 2 Saw band length 2450 mm Saw band width 27 mm Saw band thickness 0,9 mm Material feed Table height material feed 925 mm Cutting range 0° round (tube) 220 mm 0° round (solid material) 120 mm 0° rectangular lying (hollow profile) 230 x 150 mm 0° bundle (tube) 230 x 120 mm -45° round (tube) 160 mm -45° round (solid material) 85 mm -45° rectangular lying (hollow profile) 160 x 90 mm -60° round (tube) 90 mm -60° round (solid material) 55 mm -60° rectangular lying (hollow profile) 90 x 90 mm Art. No.: 3680001 S

Condition: used, machine/vehicle number: 87 54 41 57, Grinding wheel Ø: 200 mm grinding wheel width: 30 mm grinding wheel bore: 51 mm grinding wheel speed: 3000 rpm Hfjdpfxedc Swuo Apnsg electrical connection: 380 V, 630 W space requirement: 600 x 260 x 320 mm Weight approx.: 23 kg

Year of construction: 1993, condition: excellent (used), 2 centrifugal pumps Manufacturer: KSB Model: WKF 50/7 Flow rate: 5.5 l/s (19.8 m³/h) Head: 214 meters (21.4 bar) Max. temperature: 130°C Seal: Mechanical seal with flushing water connection Electric motor: VEM Drive power: 30 kW Speed: 2935 rpm Hfsdpfeibwarex Apneg ! Price per unit !