Debarking machine with root reducer

Baljer & Zembrod

Year of construction: 1992, operating hours: 47,000 h, condition: used, We offer this used Baljer & Zembrod OB/30V-R.D. machine, year of manufacture 1992. Bwodeynwhtjpfx Aa Nsi Manufacturer: Baljer & Zembrod Model: OB/30V-R.D. Year of manufacture: 1992 Condition: used Category ID: 1382 type of crane: OB maximum reach: 13.2 m lifting capacity at maximum outreach: 1,800 kg with grapple operator cabin power cable wound on drum For any questions or to receive additional information, please send us a message or contact us by phone.

Condition: like new (used), Year of construction: 2023, operating hours: 990 h, functionality: fully functional, type of input current: three-phase, total height: 3,900 mm, input current: 63 A, total length: 9,500 mm, total width: 4,500 mm, power: 15 kW (20.39 HP), Equipment: documentation/manual, Pelletizing plant for a wide range of materials such as wood, miscanthus, agricultural by-products and waste (hay, straw, corn stover, etc.), as well as feedstuffs. This is a complete plant built on a base frame, consisting of the following components: - Raw material hopper 4 m³ incl. agitator. This was extended by approx. 3–4 m³ with wooden panels. - Intermediate screw conveyor to hammer mill - Hammer mill 11 kW for size reduction of wood chips or other materials - Inclined mixer for material homogenization, incl. moisture measurement, dosing, and level measurement - Dosing hopper for pressing aids feeds into the inclined mixer - Dosing screw conveyor for optimal material feed into the press (speed-controlled) - Press 15 kW including full indicator, temperature monitoring and discharge chute Bodpsxv Dkcjfx Aa Nswi - Conveyor belt to dedusting screen - Dedusting screen with material discharge at 3 m height The plant is designed so it can be easily expanded with a second 15 kW press. The entire system is centrally operated via Siemens PLC with touch display. All parameters are monitored so that the press will be shut down automatically in the event of a fault. The press can also be operated and monitored remotely from any PC. The chip dryer shown in photo 2 on the wall, including discharge and control system, is also available for purchase. For details, please contact us.

Condition: excellent (used), Baljer & Zembrod roundwood handling, sorting, transport and sawing vehicle Bwjdpfx Aaelimrij Noi - German production - measuring the length of the wood - automatic cutting cycle TECHNICAL PARAMETERS: - max log diameter 1000 mm - crane reach max 9200 mm - crane working angle 225" - rotating head 360 " - lifting capacity: 2000mm - 2560kg 7240mm - 1680kg 9200mm - 1330kg - dimension of the hauler 6000x2150 mm - hauler with two-sided hydraulic discharge - pump motor power 11 kW - feed motor power 8.6 kW - feed speed 90 m/min HOLTEC FS 121 SAW - log length measurement - working length 1000 mm - hydraulic stroke of the guide - manual and automatic operating mode - log lifting - integrated sawdust extraction 2.2 kW - drum for winding the cord Transport dimensions 12.5x2.4x2.4m weight 12000 kg

Condition: used, Year of construction: 2005, operating hours: 18,000 h, machine/vehicle number: RUW 1703, Year of manufacture: 2005 Machine number: 1703 Track, m: 2,75 Crane type: ASX II Reach: 13,0 m Lifting capacity without grab: 1.250 kg / 13,0 m Grab: included Crane arrangement: center cabin side: left at crane column !! Sale by customer order !!! Bodpfx Aemzawqja Njwi

Condition: excellent (used), Year of construction: 2010, operating hours: 122,471 h, functionality: fully functional, power: 1,095 kW (1,488.78 HP), fuel: domestic gas L, rotational speed (min.): 1,500 rpm, type of input current: three-phase, Jenbacher J320 GS Gas Generator – 1095 kW Main specifications: Engine model: Jenbacher J320 GS Rated power: 1095 kW (ISO 3046) Speed: 1500 rpm Engine weight: 5200 kg Year of manufacture: 2010 Running hours & performance: Total operating hours: 122,471 h Active energy produced: 11,781 MWh Reactive energy: 7,327.8 Mvarh Alternator: Manufacturer: Stamford (AC Generators) Bearing types: 6319 C3 / 6228 C3 Grease type: Kluber Asonic GHY72 Re-lubrication interval: every 4000–4500 hours Heat exchanger: Manufacturer: Tranter International AB Model: GXD-042 Year of manufacture: 2010 Max. operating pressure: up to 30 bar Max. operating temperature: up to 75 °C Connection material: steel Bwsdpexb D Hbjfx Aa Noi Condition: Equipped with Jenbacher DIA.NE control and monitoring system Fully serviced in line with OEM schedules by an official service centre Excellent working condition 📍 Location: England

Condition: excellent (used), Baljer&Zembrod track system 80 m, 14 units Bsdpfx Aasyhphfe Newi

Condition: used, Year of construction: 2003, operating hours: 36,000 h, functionality: fully functional, machine/vehicle number: 1658, arm reach: 13,000 mm, load capacity: 2,500 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2003 Machine number: 1658 Track width (m): 3.0 Crane type: OBX II Reach: 15.2 m Lifting capacity without grab: 1,900 kg / 15.2 m Grab: included Crane position: in front of the cabin Cabin side: left Saw: 1.3 m Alpha !! Sale on behalf of customer !! Bwsdpfjyglfdjx Aa Nei

Condition: used, Year of construction: 2001, Wood dimensions to be processed: Input lengths min/max 500 - 6500 mm Full optimization up to max. 1500 mm Input widths min/max 40 - 300 mm Input thicknesses min/max 15 - 120 mm Wood cross-sections max. 300 x 40 mm max. 200 x 120 mm Fixed lengths after sawing min. 510 - 2800 mm Special application: Cutting blocks, length min/max. 100 - 200 mm (Caution: Multiple block lengths at the sorting line; blocks are transported to the end of the sorting line and fall into the customer's grid box). Cutting/cutting tolerance +/- 0.8 - 1.5 mm (for wood types with minimal resin content and an even surface. Tolerance up to 1 m fixed length, max. tolerance for longer pieces up to 2.5 m). Thickness tolerance +/- 3 mm. Curvature of the wood in all directions: max. 10 mm per meter in length. Wood types: soft or hardwood. System performance: Feed speed, continuously adjustable up to max. 230 m/cutting cycle 0.6 - 1. To obtain the practical output per day, an effectiveness factor dependent on the customer's production conditions must be calculated. Infeed and saw height: 900 mm (placed on customer's platform, saw requires concrete base). Sorting working height. 2000 mm Connection values: Total electrical connection value approx. 18 kW Operating voltage 380 Volt / 50 Hz Voltage fluctuations max. 5% Air consumption approx. 1200 NL/operating pressure approx. 8 bar Extraction speed approx. 30 m/nd Color pebble gray RAL 7032 and blue NCS 5030-R 80 B POSITION OVERVIEW: Item 1 Infeed and marking station with 1 side support table, adjustable 1 table as stop edge Item 2 Support roller without drive, front side in front of sheet metal table for easier feeding Item 3 Length measuring station with built-in fluorescence camera for detecting error markings Item 4 Automatic width measurement, contactless Item 5 OptiCut 304 optimizing cross-cut saw - right-hand version with built-in waste chute including equipment package for large wood cross-sections Graphic input terminal (16 x 40 characters, Numeric keypad) with software package for optimization and system control. Available for processing: - max. 16 product groups - max. 8 grades per product group - max. 200 fixed lengths per product group Item 6: Outfeed conveyor as sorting station with drive unit, length 7500 m Item 7: 2 ejectors mounted on the outfeed conveyor Bjdpfx Aew Sy T Hja Newi Storage location: Nattheim

Year of construction: 1994, condition: good (used), Baljer Zembrod root reducer Bedpon Skz Tsfx Aa Nowi with radio remote control

Condition: used, Year of construction: 2002, operating hours: 37,000 h, machine/vehicle number: 1651, arm reach: 15,200 mm, load capacity: 1,900 kg, track width: 3,000 mm, Equipment: cabin, crane, Year of manufacture: 2002 Machine number: 1651 Bwjdpjv Hwk Usfx Aa Noi Track, m: 3.0 Crane type: OBX II (year of manufacture 1997) Reach: 15.2 m Load capacity without grab: 1,900 kg / 15.0 m Grapple: included Crane arrangement: behind the cabin Cab side: middle !! Sold on behalf of the customer!!

Year of construction: 2011, condition: like new (used), For sale is 1 roller conveyor incl. one geared motor each: Technical data: Year of construction: 2011 Length: 12,75m Width: 1.40m Height: 1.00m Loading: 4 tons possible Gear motor per roller conveyor: SEW-EURODRIVE R87 DREE90L4 (for further details see picture on the type plate) Three of the four roller conveyors have a wooden wall on one side over the entire length and one roller conveyor has a side wooden wall with a length of 5.20! Bwjdoihpn Nspfx Aa Nji Two of the four roller conveyors are each equipped with 3 lateral removal systems. (see pictures)

Condition: good (used), Year of construction: 2007, Fast root de-sharpening in cross-feed mode 75 kW milling shaft Including hydraulics Bedeyaty Njpfx Aa Nowi

Condition: excellent (used), Year of construction: 2007, operating hours: 239 h, functionality: fully functional, The machine originates from our own sawmill, which is now being gradually decommissioned. With only 238 operating hours, the root reducer is in exceptionally good technical and visual condition. Technical Data Bwodpfx Aaex N Sfks Nsi Machine type: Root Reducer Manufacturer: Baljer & Zembrod Model: WRP / SEB Year of manufacture: 2007 Operating hours: approx. 238 Condition: used, fully functional Visual condition: very good (approx. 8/10) Description As the sawmill has not been operating full-time in recent years and the focus has shifted to other business areas, the root reducer has only been used occasionally and therefore exhibits minimal wear. The hydraulics, electrics, and mechanics are all fully functional. The machine operated reliably until decommissioning and was regularly inspected and professionally lubricated. Due to the planned closure of the sawmill and structural changes at the site, the machine is now being offered for sale.

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Bwsdpjhclffsfx Aa Nji Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them.

Condition: used, Equipment: crane, Baljer & Zembrod, ASX I, slewing ring from Baljer & Zembrod renewed, price 13,000 EUR ex works. Bwsdsxb Upmjpfx Aa Nji