Forging press

Beche KGH 4B

Condition: used, Year of construction: 1969, grinding height 60 mm grinding width 120 mm grinding wheel diameter 600 mm grinding length mm workpiece height 60 mm total power requirement 50 kW weight of the machine ca. 7000 kg dimensions of the machine ca. m D I S K U S (Germany) Double Side Vertical Spindle Surface Grinder, C-Frame Design, with Rotary Workpiece Feeding System and Automatic Dressing Device Model DDS 600 CR-A Year 1969 Serial-No. 6672 _____ Grinding wheels Ø x bore, each 600 mm Grinding wheels height x width, approx. 60 mm Workpiece dimensions: Grinding height x grinding width, approx. 60 x 120 mm Vertical adjustment of each grinding head 150 mm External Ø of workpiece carrier disk, approx. 810 mm Feeds of rotary workpiece feed system 14 – 145 mm/sec Grinding wheel speeds, each, infinitely variable 765 rpm (24 m/s) Grinding spindle drive, each 22 kW Total electrical load, approx. 50 kW - 380 V - 50 Hz Total weight, approx. 7,000 kg Accessories / Special Features: * Rotary workpiece feed system with infinitely variable speed adjustment prepared with workpiece carrier disk approx. dia. 800 mm with relevant workpiece shaped pockets and after the grinding the parts will be automatically sorted out and collected in a collector box. * IONIC – Size Control Unit Model Nr. 9 So with measuring probe for the ground workpieces and with signal for the hydraulic infeed of the grinding wheel when size is not in order. * Automatic Dressing Device for the grinding wheels, hydraulically operated and with the automatic return of the grinding wheels after dressing cycle to the previously adjusted position and to continue the working cycle. Dressing cycle can be presetted by a timer or a manual release. * Manually operated infeed device of the Spindle slide to optimal workpiece thickness. * Spindle drives controlled by Ampere-Meters. Iasdpst Hw N Hofx Apnjt * Separate switch cabinet. * Separate hydraulic unit. * Various carrier disks, etc. * Safety covers. * Central lubrication. * Large Coolant device with paperbandfilter This machine is ideal for double-sided simultaneous grinding of parallel workpiece surfaces by continuous method, for maximum output and accuracy in mass production (e.g. Piston rings, washers, hydraulic parts, and other punched parts.) Condition : Good . Machine can be inspected under power. Delivery : Ex stock, as inspected. Payment : Net, after conclusion of contract.

Condition: used, Year of construction: 1984, x-travel 2500 mm y-travel 750 mm z-travel 1000 mm table surface area 2550 x 800 mm Isdotqqnwjpfx Apnoat spindle taper SK 50 control HEIDENHAIN, TNC 150 B weight of the machine ca. 16 t

Condition: as good as new (ex-display), 3000 kg welding rotary table, hydraulically height adjustable Speed 0.05-0.6 U/min Table diameter 1200 mm Iasdsdvn E Uspfx Apnet Inclination 0-120° Total height 700 mm Height adjustment with vertical pane until the mid- 960 mm ~ 1910mm Horizontal disc mass 1200mm up to 1900mm

Condition: good (used), Year of construction: 2007, Parts shown by hand not come. Technical details shown on picture. Iajdpfxerpn Dvo Apnot

Condition: ready for operation (used), Year of construction: 1985, A thread and worm grinding machine Reishauer AG is available. Grinding length: 450mm, clamping length: 700mm, max. grinding diameter: 200mm, max. pitch: 80mm, max. workpiece weight: 100g, max. lead angle: +/-25°, grinding wheel diameter: 275mm/350mm, speed: 1850rpm. Machine dimensions X/Y/Z: approx. 2600mm/1800mm/1600mm, weight: approx. 3400kg. Including oil centrifuge, hood, oil mist extraction and various accessories. The splash curtain is slightly hardened. Documentation available. An on site inspection is possible. Isdpox Dm Dnofx Apnoat

Condition: used, Year of construction: 1987, pressure / t stroke / mm table-size / mm weight of the machine ca. 65000 kg Make: Shepherd Type: SVRM 4-roller bending machine: Year of construction: 1986 Working width: 3000cm Smallest pipe diameter with 600 mm roller: Ø 720 mm Smallest tube diameter with 360 mm roller: Ø 460 mm Iajdpfxeuddcas Apnst Sheet thickness up to (depending on the material): 50 mm Material SA- 738 B Working width: 2500 mm Material SA- 738 B Material thickness: 35 mm conical bending: Except for the top roller, all rollers can be moved in an inclined position for conical bending. The roller positions can be read on display instruments. For semi-automatic or fully automatic operation of the machine, the bearing jewels of the rollers are equipped with scale bars and slide cams for limit switch actuation. This allows the rollers to return to the same set position over and over again, giving a very high level of uniformity in the shot wefts being bent.

Condition: used, Year of construction: 2006, Technical details: x-travel: 800 mm y-travel: 800 mm z-travel: 800 mm turning speeds: 12.000 1/min tool taper: SK 50 control: SIEMENS 840D shopmill tool change unit: 240 fach size of pallet: 630 x 630mm mm spindle: 52 kW / 430Nm total power requirement: 87 kVA weight of the machine ca.: 15 t horizontal machining center, NC-round-table pallet-changer (2 pallets), Internal Coolant Supply 40 bar, prepared for Infrared Touch Probe Renishaw MP 10 without probe, tool-breakage control (mech.), Iasdpfx Aopumdcepnjt MQL, airblast through spindle, oilmist suction, TRANSMIT funbction, accuracy package, mode 4, glass window right door, incl. FASTEMS FPC 1000 pallet pool for 14 pallets, incl. setting up station, control, and 10 pallets approx. 98.500 h main switch on apprax. 45.500 Spindle hours *

Condition: used, Grindermak 150-06 Grindermak 150-06 New Punch press tool grinder based on the Amada Togu CNC grinder Grindermak 150 06 / For sale Table Stroke/movement 180mm Distance between table and wheel (max) 230mm Z movement 0,0001-20mm Cutting wheel Diameter (max) 150mm Cutting wheel rotation 3400 D/dk Cutting wheel power 1,1kw-3000 D/dk Stroke engine (z) 400W Complete with touch screen. In stock. Amada Togu / Trumpf quick sharp type grinder / Quick grind / Quick set / Quick load/ Iaodsfuakcopfx Apnot

Condition: used, Year of construction: 2014, INDEX C200 CNC Lathe 3 Turrets 2 spindles Fanuc Control: 31i-Model B Axial Motorized Switches: 6 pcs Radial Motorized Switches: 13 pcs Tool Holders: 11 pcs Boring Bar Holders: 21 pcs Pin: 1 pcs Loader Bushings + Sleeves: Ø51/Ø46/Ø41 New MBL loader bushings: 2 sets 2 optical scales overhauled by HEIDENHAIN 1 Balluff Socket Gantry Arms Box with various sensors and proximity switches and cables Motorized Belts: 6 pcs Set of anti-vibration bushings for MBL loaders Start-up time: On time: 37946 Hydraulic hours: 37,500 Iaodpfjxxm Hfex Apnot Production time: 26,500 With MBL Bar Feed

Year of construction: 2013, condition: excellent (used), functionality: fully functional, 2013 Maximum width: 370 mm 10 colors Rail Combo laminator on rail Web turn bar Chilled drums Chiller Iedpfx Apsw Sw Rpeneat 2 die-cutting stations 5 x Hot Air dryers Tooling