Lathe

Bernardo Solid 460 x 1500 Pro Vario

Condition: new, functionality: fully functional, machine/vehicle number: 8153336470, overall weight: 616 kg, volume flow: 399 m³/h, pressure (min.): 4 bar, pressure (max.): 13 bar, noise level: 67 dB, type of cooling: air, Equipment: documentation/manual, refrigerant dryer, type plate available, We are a company specializing in the compressed air industry for over 20 years. Professional level of service and high quality goods offered by our company - "proven" on the market - guarantee successful cooperation with you. We offer NEW screw compressor Atlas Copco GA37VSDs FF (variable speed with built-in dryer) Machine equipped with frequency converter (inverter), manufactured based on the latest technologies, which translates into greater efficiency and performance: On average 20% lower unit energy consumption (SER) than in previous models of the GA VSD series. Ecological and efficient VSD+ variable speed drive system reduces energy consumption by an average of 50% compared to models that operate at idle speed. Regardless of energy savings, efficiency (FAD) increases by up to 12%. Efficient fan motor (compliant with the ERP 2015 directive) reduces energy consumption and noise level. Superior Motor Efficiency (iPM) up to 94.5% exceeding IE3 efficiency levels. Built to work hard for your success. The industry-leading GA Series oil-injected rotary screw compressor delivers unmatched efficiency, high productivity and low cost of ownership – even in the harshest conditions. Technical data: capacity at 4 bar: 15.69- 13.75 l/s / 0.94-7.85 m3/min capacity at 7 bar: 15.67-129.35 l/s / 0.94-7.76 m3/min capacity at 10 bar: 15.68-110.79 l/s / 0.94-6.65 m3/min Max pressure 10 bar (13 Bar variant on request) Voltage 400 V Motor 37 kW Noise 67 dB(A) Weight 616 kg Cjdpfx Aswlp Hdsbrshd Motor with internal permanent magnets (IPM) Compression element Direct drive Innovative fan Separator/oil filter with durable construction Electronic water drain valve that does not cause compressed air losses Controller Elektronikon Inlet valve VSDs module Manufacturer code: 8153336470 If you are not sure whether the device is right for you, you have not found the right compressor, CALL! We will advise you on the right choice of device. We invite you to familiarize yourself with our full offer.

Condition: excellent (used), functionality: fully functional, machine/vehicle number: 70.0961.000.253, TECHNICAL DETAILS: Turning diameter: - Over bed: 800 mm - Over carriage: 560 mm - Diamter of face plate: 750 mm Height of centers: - Over flat ways: 380 mm - Over Vee ways: 358 mm Chodeup A Rzspfx Abrjd Gap, bed and gap piece: - Turning diameter in gap: 980 mm - Width of gap in front of face plate: 380 mm - Swing in gap: 1040 mm - Width of gap in front of face plate within swing diamter: 330 mm - Width of bed: 560 mm Headstock spindle: - Diameter of spindle bore: 90 mm - Spindle diamteres in front bearing: 145 mm - Taper in spindle: 6 Morse Spindle speeds: - Number: 18 - Spindle speed ranges: 7,1 - 355 RPM 9,0 - 450 RPM 11,2 - 560 RPM Power required: 7,5 - 14 kW Feeds: - Number: 32 - Sliding feeds per revolution: 32 longitudal feeds: 0,071 - 2,5 mm/rev. 32 cross feeds: 0,04 - 1,4 mm/rev. Extras: additional equipment, manuals for machine

Year of construction: 2017, condition: ready for operation (used), Offered is an OptiMill MF 4V milling machine, almost new, 100h. Year of construction 2017, travel ranges X/Y/Z: 800mm/320mm/400mm, stepless spindle speed 9-6750rpm in 8 speed ranges, with electronic speed control, quill stroke: 127mm, 3-axis digital display DPA21, right/left rotation reversing switch, drilling depth stop, cross table X/Y 1244mm/230mm T-slot 16mm, chuck guard, coolant system, manual central lubrication, universal compressed-air tool clamping system ISO 40, stepless table feeds in X/Y, weight approx. 1200kg. Viewing is possible by arrangement. Chedpfjxyk Ucsx Abred

Condition: ready for operation (used), Year of construction: 2010, controller manufacturer: MAZATROL, controller model: MATRIX, This 3-axis Mazak QTN 250 M X 1000 horizontal turning machine was manufactured in 2010. If you are looking to get high quality turning capabilities consider the Mazak QTN 250 M X 1000 machine we have for sale. Contact us for more information. Machine Benefits Technical Machine Benefits Codpjyalpcefx Abrehd • Max. Capacity: 640 • X-axis rapid traverse speed: 36000 / z-axis rapid feed speed: 36000 / c-axis rapid feed speed: 555 • Machinable diameter: 380 • Maximum machinable length: 600 • Bar capacity: 76 • Self-centring dimensions (main spindle): 250 • Stroke: 1000/cone: cm 4 • Coolant tank: 300 l

Condition: used, Year of construction: 2020, workpiece weight (max.): 5 kg, table width: 267 mm, table length: 1,466 mm, table load: 159 kg, tool diameter: 89 mm, Used Machining Center Brand: Haas Model: TM-2P Year: 08/2020 Serial Number: 1170479 Operating hours: Spindle on time: 12,000h Specifications: - Travels (X, Y, Z): 1016mm, 406mm, 406mm - Spindle to table distance (Min. - Max.): 102 - 508mm - Spindle speed: 6000 rpm - Spindle power: 5.6 kW - Taper: BT 40 - Tool changer carousel: 10 positions - Maximum tool diameter: 89mm (adjacent) - Maximum tool weight: 5.4kg - Coolant pump kit - HAAS CNC - Table dimensions: 1466x267mm - Maximum table load: 159kg Chjdpjxqc H Sofx Abrod - Maximum feed rates on all three axes: 10.2m/min.

Condition: used, Year of construction: 1979, SKF cylindrical grinding machine with internal grinding attachment, hydraulically operated. Cjdpfx Abegt Ea Rsrehd

Condition: excellent (used), Year of construction: 1990, Force 25tons Throat 160mm Daylight 500mm Table size 650x650mm Ram size round 140mm Cedpfx Asfcw Apebrehd Stroke 130mm requested power 4 KW Weight 2000Kg height 2100mm width 1100mm depth 1500mm

Condition: like new (used), Year of construction: 2021, functionality: fully functional, Weiler Praktikant VCD Precision Lathe (2021) Manufacturer: Weiler Model: Praktikant VCD Precision Lathe Year of manufacture: 2021 Condition: Used, excellent, like new, incl. new maintenance and measurement protocol prior to sale Centre distance: 650 mm Centre height: 160 mm Swing over bed: 320 mm Swing over cross slide: 190 mm Cross slide travel: 150 mm Top slide travel: 110 mm Top slide swivel range: +/-65° Bed saddle guideway length: 350 mm Bed width: 205 mm Tool shank cross-section (H x W): 20 x 20 mm Height from top slide to turning centre: 30 mm Spindle head according to ISO DIN 702-3 (DIN55027) size 5 Spindle diameter in front bearing: 70 mm Spindle bore: 43 mm Main spindle taper metric 50 Drive power: 6 kW Speed range: 30 – 4,000 rpm Number of gear stages: 1 Number of speeds: stepless Number of feeds: 24 Longitudinal feed: 0.02 – 0.63 mm/rev Chjdpfx Aboztyrqsred Facing feed: 0.006 – 0.2 mm/rev Quill diameter: 40 mm Quill stroke: 85 mm Quill taper: 3 Morse taper Weight, without packaging and accessories: approx. 1,150 kg Dimensions (L x W x H), net: 1,720 x 890 x 1,700 mm Headstock / Rear cover / Sliding guard: Light grey RAL 7035 Machine base / Machine bed: Basalt grey RAL 7012 Display housing: Blue NCSS 4550-R80B

Condition: used, Year of construction: 2008, x-travel 400 mm y-travel 300 mm z-travel 400 mm spindle taper ISO 40 spindle turning speed range 40 - 2.000 U/min table-size 750 x 320 mm feeds -stepless- 10 - 380 mm/min rapid traverse 1.200 mm/min power capacity 2,2 kW quill stroke 80 mm voltage 400 V total power requirement 4,7 kW weight of the machine ca. 1,1 t dimensions of the machine ca. 1,15 x 1,40 x 1,85 m - Serial-No.: 148373 - 3-axis digital display Codpfx Ajxa Hf Rjbrjhd - Horizontal milling device - Milling head swivels ±45° - Coolant device

Condition: excellent (used), Year of construction: 2015, operating hours: 2,200 h, functionality: fully functional, machine/vehicle number: G3158-0645, HYUNDAI WIA MODEL L300C 2 AXIS CNC LATHE WITH FANUC 0i-T. Very Low hours usage -2200 hours cutting time COOLANT SYSTEM - HIGH PRESSURE 20 BAR PARTS AUTOMATION - BARFEED INTERFACE CHIP CONVEYOR - SIDE HINGED CNC CONTROL OPTION - MANUAL GUIDE-I (NC FANUC 0i) PROBING - QUICK TOOL SETTER - MANUAL TRANSFORMER - 35 KVA AND CABLE MACHINE CONSTRUCTION & FEATURES • One Piece Heavy Duty Cast Iron Bed Construction for High Accuracy & Rigidity • 3,000 Rpm High Power Main Spindle • Heavy Duty Cutting with Excellent Performance • 12 Station Rigid Turret • 20 x 24 m/min Rapid Traverse • Hardened & Ground Solid Box Guide Ways MACHINE CAPACITIES Swing Over the Bed Ø 750 mm Swing Over the Carriage Ø 480 mm Maximum Turning Diameter Ø 560 mm Maximum Turning Length 720 mm Bar Capacity Ø 90 mm SPINDLE Chuck Size Ø 305 mm Spindle Bore Ø 102 mm Spindle Speed (rpm) 3,000 rpm Motor (Max/Cont.) 26/22 kW Torque (Max/Cont.) 1,098/929.7 Nm. Spindle Type Belt + 2 Step Gear Spindle Nose A2-8 FEED Travel X 335 mm Travel Z 750 mm Rapid Speed X 20 m/min Rapid Speed Z 24 m/min Slide Type Box TURRET Number of Tools 12 Tool Size - OD 25 mm² Tool Size - ID Ø 50 mm Indexing Time 0.3 Sec/Step TAILSTOCK Taper MT 5 Quill Diameter Ø 100 mm Quill Travel 120 mm Travel 750 mm TANK CAPACITY Coolant Tank 220 L Lubricating Tank 1.8 L POWER SUPPLY Electric Power Supply 30 kVA Thickness of Power Cable Over 35 mm² Voltage 415 V / 50 Hz / 3 Ph MACHINE Floor Space (L x W) 3,506 x 2,002 mm Height 1,997 mm Weight 6,400 kg Codpfx Abew Dcdyorohd STANDARD SUPPLIED MACHINE FEATURES • Ø 305 mm Hollow 3 Jaw Power Chuck • 220 L Coolant Tank • Door Interlock • Chuck Clamp Foot Switch • Total Splash Guard • Quill Type Tailstock • Call Light • Standard Live Centre • Quick Tool Setter • Levelling Pads • Operation Manuals • Electrical & Mechanical Drawings