Eccentric presses Berrenberg EPr 160t 1963

Berrenberg EPr 160t

Condition: used, functionality: fully functional, Various electric motors in stock Different renowned German manufacturers Ppedpfx Aox Nh S Tsaaop From 1 to 160 kW All electric motors function tested

Condition: used, Eccentric punch press HAULICK + ROOS type RVD 125 double column - eccentric press Machine No. 212560 Year of construction 1981 pressure force 125 ton. table size 880 x 800 mm table opening 470 x 140 mm column width 900 mm column width lateral 415 mm ram stroke 45 mm slide adjustment travel 0-80 mm Installation height on the picture 340 mm Stroke rate 50 to 300 strokes/min. Motor power main drive 22 kW Mains connection 380 volt, 50 Hz - Double connecting rod drive with 4-fold eccentric shaft for off-center ram pressure load - adjacent electrical cabinet - NC roll feed EBU, width 250 mm, year 2003 - adjacent control panel for roll feed Ppjdjhlnzkspfx Aaaep - strip running direction from left to right space requirement (press) L x W x H 3000 x 2000 x 3020 mm transport height 2950 mm weight of the press approx. 11 ton.

Condition: good (used), Year of construction: 1975, working width: 3,100 mm, sheet thickness steel (max.): 10 mm, sheet thickness stainless steel (max.): 6 mm, back gauge: 700 mm, overall weight: 6,000 kg, total length: 3,400 mm, total width: 2,200 mm, total height: 1,800 mm, cutting length (max.): 3,100 mm, throat depth: 300 mm, Cutting length 3100 mm, cutting capacity 10 mm, motor 15 KW, working high 800 mm, back gauge 700 mm motorised, footpedal, 3 frontarms, fingerstop, pneumatic back support, cutting angle adjustable, dimension 3400x2200x1800 mm, weight ca. 6000 kgs Ppjdpfxsvvwdye Aaajp

Condition: used, Year of construction: 1989, pressure 250 t stroke 20 - 190 mm no. of strokes 24 / 48 /min throat 500 mm passage to the back 1000 mm dayligth 615 mm table surface area 1400 x 880 mm hole in the table 450/500 mm table height over floor 800 mm ram surface 1380 x 620 mm ram adjustment 125 mm power requirement 29,0 kW Weight 27,0 t Ppsdovut Ncopfx Aaaop dimensions of the machine ca. 2,0 x 2,6 x 4,1 m x m x m permitted for manual loading according to the German Safety Regulations (UVV) with motor with 2 speeds, pneumatic clutch/brake combination, hydraulic overload protection in ram, pneumatic counterbalance in ram, motoric ram adjustment, semi-automatic stroke adjustment, motoric centralized lubrication, two-hand operation can be inspected in running function in our warehouse

Condition: refurbished (used), Year of construction: 2013, functionality: fully functional, machine/vehicle number: D91402707010001/2013, overall weight: 1,500 kg, Electric motor for sale For description, see nameplate and pictures Sale only within EU member states! Not a private sale The MAE is available for inspection. We accept no liability for any warranty claims. We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations. Ppodpewittpofx Aaajp We assume no liability for the accuracy of the technical data and year of construction, for the completeness of accessories and tools, as well as for compliance with all safety and environmental requirements mentioned in the accident prevention regulations.

Condition: used, Year of construction: 1973, pressure 200 t chamfer lenght 3600 mm distance between columns 2650 mm dayligth 500 mm throat 300 mm stroke 250 mm working feed 10,5 mm/sec return speed 100 mm/sec ram stroke speed 150 mm/sec table height 900 mm oil volume 500 l total power requirement 37 kW Pjdpfx Aaot I D U Ejaopp weight of the machine ca. 17800 kg dimensions of the machine ca. 3710 x 1800 x 3390 mm Equipment: - Controlled axes Y1 + Y2 - Manual X-axis with digital position display - Set of upper and lower tools - 2x stop fingers - 2x front support arms - Hand and foot controls - Side + rear safety guard - Operating instructions

Condition: excellent (used), Year of construction: 2018, Geared motor, electric motor, electric geared motor, spur geared motor -Manufacturer: SEW-Eurodrive, helical gearmotor -Type: R97/II2GD EDRN160L4/3GD/TZF/AL i18.24 -Speed: 1474/81 rpm at 50 Hz, see photo type plates -Power: 15 kW -Shaft: Ø 60 x 120 mm Ppodpot Drkysfx Aaajp -Protection class: IP54 -Dimensions: 970/400/H370 mm -Weight: 231 kg

Condition: good (used), Year of construction: 1985, functionality: fully functional, overall weight: 1,450 kg, total length: 1,620 mm, total width: 930 mm, total height: 920 mm, gear ratio: 200:1, torque: 21,400 Nm, shaft diameter: 160 mm, power: 14 kW (19.03 HP), 6 industrial helical bevel gearboxes from Flender / ASUG / Penig TGL 21815 maximum continuous torque: 27280 Nm Gear ratio: i= 200:1 max. power: 14 kW at 1250 rpm 20 kW at 1400 rpm Oil filling: 170 kg Weight: 1450 kg Shaft diameter d1: 40 mm Shaft diameter d2: 160 mm Shaft height h1: 500 mm Total height h2: 925 mm Ppjdpfxsrvg N De Aaaop Also available sprocket 48B3 17 Z and 48B3 35 Z

Year of construction: 1995, condition: used, pressure 125 t stroke 10-80 mm no. of strokes 240 Hub/min ram - range of adjustment 80 mm Ppodpfx Aaslp U Nqsaop table surface area 850x600 mm ram surface 760x550 mm hole in the table 850x130 verstellbar mm table height 1100 mm tool hole in ram Ø 50 mm total power requirement kW weight of the machine ca. 13 t dimensions of the machine ca. BxTxH: 3000x2000x3300 mm

Year of construction: 1982, condition: used, pressure 150 t throat 350 mm stroke 20-120 mm no. of strokes 40-60 Hub/min ram - range of adjustment 85 mm table surface area 1050x690 mm Psdpfxelp U Iwo Aaajpp ram surface 650x320 mm hole in the table 325x200 mm table height 850 mm tool hole in ram Ø 50 mm weight of the machine ca. 8,6 t dimensions of the machine ca. 2500x2500x2900 mm