Eccentric Press - Single Column

BEUTLER NOVA CR 2500 (UVV/CE)

Condition: used, Year of construction: 2007, pressure 63 t stroke 8 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 440 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm Lrjlhcowc U Insdw Hon ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,2 t dimensions (WxDxH) 1,3 x 1,8 x 2,8 m permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination, light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, central lubrication, two-hand and foot operation

Condition: excellent (used), Year of construction: 2007, Press force: 2,000 kN Table surface: 2,300 x 1,100 mm (W x D) Through-hole openings: 2 x 700 x 300 mm Distance between Columns: 2,460 mm Ram clamping area: 2,300 x 1,100 mm Side clearance: 740 mm Installation height: 550 mm (lower stroke, upper adjustment) Stroke rate: 30 - 140 rpm, continuously adjustable Stroke: 20...220 mm Ram adjustment: 150 mm (motorized) Main drive: 30 kW Weight: approx. 27,500 kg Design: • Siemens + Beckhoff control system • 8-way sliding guide • Motorized oil circulation lubrication • Automatic ram adjustment • Hydraulic overload protection • Pneumatic ram weight compensation • Electric motorized stroke adjustment • Siemens + Beckhoff control system • Beckhoff panel visualization • T-slots in table and ram (28 mm, 300 mm spacing) • Vibration-damping machine feet • 4 tool locks + 4 cam outputs • Ram with 20 mm wide center groove • Hydraulic tool clamps on the table and ram • Hydraulic roll blocks for tool changes Kemmerich strip processing system, consisting of: Decoiler Type: V 5000 A – SH – 600 - S Load capacity: 5,000 kg Strip width: 100 - 600 mm Spreading range: 470 - 520 mm Coil – outer diameter 2,000 mm • Motorized auxiliary drive • Pneumatic disc brake • Hydraulic spreading via sliding wedges • Rear support disc and 3 attachable limit arms at the front • Hydraulically operated and driven pressure roller, laterally adjustable via handwheel • Loading chair (stationary, reel moves hydraulically), lifting height 770 mm with 4 limit bars Straightening Machine Type: RMBMZ 50.600 UF Strip Width: 40 - 600 mm Strip Thickness: 0.5 - 4.0 mm Straightenable Cross Section: 1,200 mm² Number of Rollers: 9 Diameter of Straightening Rollers: 50 mm Lslhcdjv T Anlsw Horn Number of Pulling Rollers: 2 Diameter of Pulling Rollers: 100 mm Speed: 3 - 25 m/min Design: • Rollers hardened, ground, and hard-chrome-plated • Lower straightening rollers and feed rollers driven by gears • Motorized adjustment of the roller frame via motors, adjustment accuracy 1/100 mm, values can be saved • Upper rollers can be lifted by 100 mm • Feed roller can be lifted pneumatically • Lateral strip guidance at the inlet with handwheel and Threaded spindle • Outfeed roller cage and loop bridge • Loop control via ultrasonic transducer • Hydraulically operated insertion aid, consisting of a table with an extendable tongue and an upper bending roller Roller feed Strip width: max. 600 mm Design: • Hardened, ground, and chrome-plated rollers • Driven by gear motor • Hydraulically liftable upper roller • Hydraulic height adjustment • Lateral strip guide at the inlet with handwheel • Roller cage Additional design: • Pneumatically pivoting loop bridge between the straightener and feeder • Safety fence around the entire system • Coiler and straightener on a shared base frame • Various replacement rollers for the straightener

Year of construction: 2003, Condition: used, pressure 100 t stroke 10-130 mm Lelora Rr Ejhcdw Hjrn no. of strokes 30-90 Hub/min throat 330 mm ram - range of adjustment 100 mm table surface area 950x660 mm ram surface 540x440 mm hole in the table Ø 230 mm table height 1000 mm tool hole in ram Ø 50 mm total power requirement 7,5 kW weight of the machine ca. 7 t

Condition: used, Year of construction: 1995, pressure 063 t throat 260 mm stroke 12 - 120 mm Stroke rate 30 - 130 / min Distance table/ram, max. stroke up, adjustment up 495 mm Table surface area 800 x 560 mm Hole in the table 220 mm table height over floor 800 mm Passage to the back 270 mm Ram surface 450 x 360 mm Ram adjustment 120 mm Lolhcdwjvut Ewj Horn Power capacity 5,5 kW Weight 5,0 t Dimensions (WxDxH) 1,8 x 1,5 x 2,7 m only permitted for automatic mode according to the CE Regulations with infinitely variable drive, pneumatic clutch/brake combination, mechanical overload protection in ram, fix table, two-hand operation can be inspected in running condition in our warehouse

Condition: used, Year of construction: 2003, pressure 63 t stroke 10 - 120 mm no. of strokes 40 - 120 /min throat 280 mm passage to the back 325 mm dayligth 430 mm table surface area 820 x 580 mm hole in the table 200 mm table height over floor 830 mm ram surface 470 x 340 mm ram adjustment 100 mm power requirement 4,0 kW Weight 5,20 t Lolhcdovzxttow Hjrn dimensions of the machine ca. 1,3 x 1,7 x 3,1 m x m x m THE PRESS IS READY FOR USE IMMEDIATELY ! permitted for manual loading according to the CE-norm with infinitely variable drive, pneumatic clutch/brake combination (NEW IN 2025), light guard (make Sick), hydraulic overload protection in ram, pneumatic counterbalance on ram, manual stroke adjustment, manual ram adjustment, two-hand and foot operation