Single Edgebanders

BRANDT KDF 1230 HIGHFLEX

Condition: used, Number of boring spindles 10 St. Working width 230 mm Working height 160 mm Feed motor 5,5 kW Feed speed 6-36 m/min. Hodjw H Iv Tspfx Aaask

Condition: used, Year of construction: 2008, Used machine Year of manufacture: 2008 Edge Control control system with 18.5" touchscreen color monitor 16:9 Swiveling operator panel, Program storage, Motorized pressure bar adjustment, Feed via transport chain, Feed speed: 8-18 m/min Extendable workpiece support, Infeed fence with motorized adjustment Jointing unit 1961, Diamond jointing cutter for climb and counter rotation, Automatic adjustment to workpiece height Edge feed 1903 Pre-trimming up to 3 x 45 mm (depending on material) Glue application system 1905 Multi-System Automatic glue height adjustment with sensor nozzle, Pressure regulator for adjusting the cartridge contact pressure, Use of PUR adhesives possible, Pressure unit 1913 MOT, First roller driven End trimming unit 1918 with pneumatic adjustment End trim saw pneumatically swiveling, Multifunction unit 1824 MOT 4 with multifunction cutter radii 1,2,3 mm Corner copying unit 1832 Corner copying up to 3 mm edge thickness Radius scraper 1929 MOT 2 With motorized adjustment of horizontal tracing rollers With pneumatic adjustment (top and bottom separate) Chip collection box for radius scraper, Surfacing scraper 1964 For removing glue residue for a clean glue line With extraction hoods Spray unit 1856 for infeed and outfeed area Buffing unit 1940 For finishing and edge polishing ----- Technical Data ----- Edge thickness roll material: 3 mm, Edge thickness strip material: 8 mm, Max edge thickness for corner copying: 3 mm, Workpiece thickness: 45 mm, Workpiece thickness for corner copying: 45 mm, Min. workpiece length: 180 mm, Hedpfx Aov Sv Enjaaok Feed speed: 8-18 m/min, Distance workpiece support: 470 mm, Support table diameter for edge material: 800 mm, End cut knife for coiled material up to: 3 mm, Heating time: 3.5 min, Jointing unit power: 2 x 2 kW, End trim saw power: 2 x 0.22 kW, Milling station power: 2 x 0.35 kW, Corner copying power: 0.22 kW, Extraction port jointing unit: 120 mm, Extraction port milling unit: 70 mm, Extraction port scraper unit: 70 mm, Total length: 5,350 mm, Dimensions (LxWxH): 5,350 x 1,669 x 1,940 mm Picture of operating hours taken from a recording in 2022 Availability: short term Location: Röllbach

Condition: used, machine/vehicle number: 007517, Type of edging: Thin edge, Thick edge, Solid wood Gluing System: EVA Hotmelt, Hot Air Premilling Unit: yes Corner Rounding Unit: yes Grooving Unit: yes Max feed speed: 18 m/min Hodjwuz E Rspfx Aaask Maximum panel thickness: 60 mm Operating Units: 9 nr

Condition: like new (used), functionality: fully functional, Panel Dividing System SCHEER FM 16 – DNC 3100 x 3100 As New – Machine No. 33542 The SCHEER FM 16 is a high-performance, electronically controlled panel dividing saw featuring advanced drive technology and an intuitive control interface. The machine has been fully overhauled and newly painted – its condition is virtually as new. Ideal for precise, automated cutting of wood-based panels in continuous industrial operation. Main Technical Data: • Cutting length: 3100 mm • Cutting depth / Blade projection: 80 mm • Saw motor: 7.0 kW • Scoring motor: 1.1 kW (can be switched off) • Feed speed: 2 – 40 m/min (steplessly adjustable) • Return: Rapid traverse, automatic lowering • Operator interface: SCHEERWIN, graphical, document-oriented (64-bit) on Windows 10 • Drive system: Küenle frequency inverter with Stöber synchronous servo drives incl. absolute encoder – for highest positioning accuracy and dynamic control Features & Highlights: • FM 16-3100 longitudinal cutting saw with hardened guides and automatic forward/reverse travel • HP 5021 material feed table with 6 clamping carriages, servo drive & measuring resolution of 0.05 mm • WP angular pressure system, 2400 mm adjustment range, fully automatic • SP 5000 remnant cutting device for offcuts down to min. 5 mm • HP 5024 miter fence table (1800 x 800 mm), steel angle with Pertinax overlay • HP 5025 workpiece support table (1800 x 800 mm), also with Pertinax overlay • Air cushion system in the front tables, including radial fan Saw blades included: • KSB 4005 for main saw (ø 305 mm, Z = 60) • KSB 4006 for scorer (ø 200 mm) Condition & Service: • Condition: Overhauled & as new • Functionality: Fully operational • Warranty: 12 months Reliability in Continuous Operation: This machine is in use worldwide – even under extreme conditions. Whether in the dry climates of Africa or the humid environments of Southeast Asia (e.g., Thailand), the SCHEER FM 16 operates reliably in 3-shift systems – 365 days a year – and stands out for its superior precision, stability, and durability. Warranty: We are so confident in the quality and robustness of our machines that we offer a 7-year warranty on the machine frame and guideways. (Excludes electrical supplier components and wear parts.) Flexibility & Customization: We offer various models and equipment options – to fit every budget. We also realize custom tailored solutions based on your individual requirements. 📞 Contact us for an individual offer or to arrange a viewing appointment. Hodpfxeunwk To Aaask Machine available from stock. Delivery, commissioning and training optionally available.

Condition: good (used), BRANDT highflex 1440 edgebanding machine well equipped, possibility to check before buying pre-cutters application of glue pneumatic pre-application guillotine pressure rollers pre-cutting balls top and bottom pre-milling unit 2 x earning-multifilling unit profile cyclin flat cyclin polisher machine has nc cutter control and pneumatic package max workpiece height 60mm max thickness of veneer in a roll 3mm Hedpfx Ast Hxxpoaajk feed rate max 14m/min Machine well maintained in very good condition

Condition: used, Holz Her STREAMER 1057 FÜ + PU Edge thickness: 0.4 - 6 mm Modern control system with selector switch for aggregate adjustment Pre-milling unit for precise workpiece preparation before the gluing section Fully automatic edge magazine for coil and strip materials GLU-JET cartridge adhesive application station + PU gluing Adhesive application via nozzle technology Workpiece height: 6–60 mm Automatic glue height adjustment High-quality 3-roller pressure unit, 1st roller motorized Hjdpfx Ajyg H Hijaaek Pneumatic end trimming unit for coil and strip material up to 6 mm edge thickness With pneumatic adjustment for 0–10° inclination of the end saws Milling unit for flush trimming up to 6 mm, radius milling and bevel milling up to 15° Corner rounding unit for edges up to 3 mm thickness Scraper unit for bevels and radii, equipped with 2 scraper holders Flat scraper unit for finishing Spraying device – PU Machine equipped with all processing tools Machine is WORKSHOP-TESTED and in TOP CONDITION Available from stock in Lieboch

Condition: used, machine/vehicle number: 008395, X axis working area: 3050 mm Y axis working area: 1250 mm Main Electrospindle power: 10 KW Number of controlled axes: 3 axes Hsdpfxjygtcqo Aaaek Total number of drilling spindles: 27 Total number of tool changer positions: 8

Condition: excellent (used), Maggi Boring System 35 Multi-spindle Drill Hjdpfxevx Aqde Aaajk Number of spindles 35 Spacing between spindles 32mm Distance between first and last spindle 1088mm Maximum drilling depth 85mm Spindle speed 2800r.p.m Number of pneumatic clamps 4 Machine working pressure 6-8bar Air demand per cycle 15l Number of motors 2×1.5kw Weight 450kg CE certificate

Condition: used, Year of construction: 2004, machine/vehicle number: P 04-09-002, neu U05 10 001, Spraying machine Venjakob VEN SPRAY-K All pictures only for example - Producer Venjakob - Year of construction 2004 - Current condition: not refurbished - Offer price for refurbished condition - Working width 800 mm (1000) mm - Operating side, right - Duo gun drive system - Dry filter system 4.000 m³/Std. - Diameter exhaust air pipe 400 mm Hsdpfxjumvr To Aaask - Transport belttransport System - Feed speed adjustable 3 - 8 m/min - Lacquer reclaiming system with v-belt - Gun control system LS 1 - Number of installed lacquer circles 1 Stk. - Airless spraying system 4 Stk. Krautzberger KAA 1300 - Number of lacquer pumps 1 Stk. - Producer lacquer pump Wagner 35-70 - Suitably for solvent based lacquer - Suitably for water based lacquer - Total connection power 7 kW, Stromaufnahme 17 A , Absicherung 35 A - Location, on stock - Voltage fluctuation max. +/- 5 % _____ Optionally, we can also provide you with a quotation for the assembly and start-up of the system, as well as training for your employees. We also offer regular maintenance and servicing of the machine on request. For further information, get in touch with us!

Condition: new, MAIN FEATURES OF THE MACHINE: -Single head drilling machine for drilling in the range of 0 - 90 °. -Pneumatically adjustable head angle -Cast-iron spindles -Spindles adapted for quick-connections -Pneumatic material clamps -Cast iron working table -Fast and accurate adjustment -Precision drilling STANDARD EQUIPMENT OF THE MACHINE: -2 1.5 m long aluminum rulers (right and left) with two stoppers Hjdsp Ecdgepfx Aaaok -5 quick-action chucks Technical data: Number of spindles: 21 Distance between first and last drill bit: 640 mm Number of pneumatic presses: 2 Distance between centers of individual spindles: 32 mm Max drilling depth: 65 mm Air consumption: 10 l/cycle Max workpiece size: 915 x 3000 mm Max workpiece thickness: 70 mm Working pressure: 6 - 7 bar Rotation: 2800 rpm. Motor power: 1.5 kW Noise level: 76.1 dB Overall dimensions: Length: 1030 mm Width: 1030 mm Height: 1285 mm