Edge banding machine

BRANDT O KDN 200 Ambition 1200

Condition: refurbished (used), Year of construction: 2025, operating hours: 50 h, machine/vehicle number: 3018-04, Country of manufacture: Switzerland Voltage: 380/50/3 Net weight: 3100 kg Overall dimensions: 230x155x170 cm Installed power: 13 kVA Gtsdpsw T Sd Tjfx Aadou Customs tariff position: 8460.2920 TECHNICAL SPECIFICATIONS MAIN DIMENSIONS Distance between centers: 650 mm Grinding capacity SpW+bs: -80 Stroke: 700 LONGITUDINAL SLIDE Max stroke: SpW+50 mm Minimum automatic feed: 1.5 mm Speed: 50-5500 mm/min Reversal delay: 0-6 sec Maximum table swivel: 12°/10°/8.5°/6° Pneumatic relief for table and workhead CROSS SLIDE Max stroke: 300 mm Rapid traverse: 60 mm Plunge grinding depth in diameter: 3.4 mm Feed 1: 0.012-6 mm/min Feed 2: 0.012-1.2 mm/min Feed per pulse: 0.001-0.05 mm GRINDING WHEEL HEADSTOCK Left-side wheel, external grinding: 400x80x127 mm Drive power: 5.5 kW Peripheral speed: 35 m/s RPM: 1670/2110 min-1 Internal grinding device for belt-driven spindles, including drive unit: 1.5 kW WORKHEAD Swivel range: 0-90° Continuously variable RPM: 30-1000 min-1 Internal taper: Morse 5 Collets: W-25 Drive power: 0.55 kW Maximum workpiece weight between centers: 130 kg Grinding load between centers: 100 Nm TAILSTOCK Internal taper: Morse 3 Quill stroke: 35 mm Fine adjustment for cylindricity correction: ± 40 μm TECHNICAL CHARACTERISTICS: GUARANTEED WORKING ACCURACY Straightness of the generator over 630 mm: 0.003 mm Roundness during chuck grinding: 0.0003 mm CONNECTION VALUES Maximum absorbed power: 13 kVA Maximum permitted voltage fluctuation: -15%/+10% Maximum permitted frequency variation: ± 3% Required compressed air pressure: 5 bar Unless otherwise stated or in case of error or omission, these technical details are provided without engagement.

Condition: as good as new (ex-display), Year of construction: 2025, Spindle swivels: No Height adjustment: Handwheel Pivot adjustment: - Milling jaw adjustment: manual height indication: mech. counter Swivel angle display: - Milling stop indicator: mech. counter Milling spindle diameter: 30 mm speeds: 3000, 4500, 6000, 7000, 10000 Motor power: 7 kW Motor brake: Yes, automatic Suction connection: 2 x 120mm Machine length: 2599mm Machine depth: 900mm Gsdpegzlpkofx Aadotu Weight: 655kg

Year of construction: 2022, condition: new, Altendorf WA 6 manual height adjustment, double roller carriage length 2000 mm scoring unit, swiveling, cantilever table, angular miter fence, automatic brake, lowerable below table height ----- Technical data ----- Swivel range: 0 - 45 °, cutting width at rip fence: 1.000 mm, max. cutting height: 87 mm, max. saw blade Ø: 315 mm, Swivel range miter fence: up to 49 °, Speeds: 4,200 rpm, Engine power main motor: 5.5 hp / 4 kW, motor power scoring motor: 0,5 hp / 0,37 kW, Working table height: 910 mm, suction nozzle Ø: 1 x 100 / 50 mm each, weight: 450 kg Gjdpfoihahmjx Aadetu Large suction hood Location: Ex stock 54634 Bitburg - immediately available - Location: Ex stock 54634 Bitburg - free on truck - - immediately available -

Condition: good (used), Year of construction: 2015, functionality: fully functional, edge thickness (max.): 12 mm, ENGLISH: Heavy duty edgebander OLIMPIC (SCM Group) in rich configuration suitable for custom made and series production. Machine is equipped with aggregates with servomotors (ABS R1+R2mm + thin edge + solidwood). Model: Olimpic K800 TERL Manufacturer: SCM Group Production year: 2015 State: good Edgebanded edges: 238.800 meters Main technical parameters: - feeding speed: 12/18 m/min. (including rounding) - panel thickness: 10-60 mm (including rounding) Equipment and configuration of the machine: - control panel with LCD touch screen STARTOUCH - internal lightning of working area - automatic lubrication of the feeding chain - electronic top pressure adjustment - glue pot with quick change of the glue color Working units: - antiadhesiv spray - pre-milling unit (2x DIA cutter) - glue pot with roller "VC/1000" (glue pot with quick-release system) - pressure rollers (4 pcs) with timed intervention - 2 motor end cutting unit "K/SEL" with pneumatic tilting of the blades - radius trimming unit "RI/800" R1mm + thin edges + solid wood (12mm) (3 position pneumatic kit) - 2 motor rounding unit "ROUND K MULTI EDGE" R2mm + thin edge Gtodpfewxt Tbsx Aadou (each motor has: 2 electronic axis with servomotor) - radius edge scrapers "RAS/S 2P" MULTI-EDGE R1+R2mm (each unit has: 2 electronic axis with servomotor) - cleaning spray - glue scrapers "RCA/2C" - brushes"SP/F"

Condition: ready for operation (used), Year of construction: 1974, machine/vehicle number: 74-4-10, functionality: fully functional, ALTENDORF F90 sliding table saw, year of manufacture 1974 Machine no.: 74-4-10 Manufacturer Altendorf Germany Saw length mm: 2600 cutting width mm: 1.300mm Cutting height max mm: 130 Gtjdpfxeipvrbs Aadsu Saw blade diameter max. 400 mm Main motor 5.5 KW with scorer 4 speed levels Saw blade height adjustment: manual Weight approx. kg: 780 Technical data subject to change

Condition: used, Chipping roundwood: 100-150 m3/h Chipping small waste: 50-100 m3/h Weight: 3165 kg Max log diameter: 254 mm Söderhamn Eriksson 670-56 CC chipper with electric motor. Söderhamn Eriksson 670-56 chipper is intended for the production of chips for pulp, fibreboard and chipboard manufacture. Both roundwood and sawmill waste may be used as raw material. Chipper 670-56 feed is horizontal, at an angle of 37,5 grades to the grain. The chips, of consistent high quality, may be discharged at the bottom or blown straight upwards. Be one of those woodworking companies that wisely manage the resources available to them. Gtedpfx Ajhclffsadou

Condition: new, Best price 4499 Eur (EXW Jonava, Lithuania) Dimension of sliding table- 2200x375mm Gross cut capacity- 1500mm Width of cut between saw blade and rip fence - 1140mm Saw blade diameter - 400mm Height of cut (90°) - 115mm Height of cut (45°)- 105mm Speed of main saw spindle - 4500/6000rpm Main spindle diameter - 30mm Tilting saw blade - 0-45º Saws lifting, up and down, electrical control. Main motor - 5,5 kW Scoring saw blade diameter - 120mm Godpfx Aodnxydeadotu Speed of scoring saw blade - 7000-8000rpm Scoring saw diameter - 20mm Scoring motor - 1,1 kW Weight: 700 kg * Using the blade 400mm, the smaller should be removed. Reduced saw blade should be used with not more than 350 mm main shield.

Condition: as good as new (ex-display), Year of construction: 2023, functionality: fully functional, Numerically controlled machining centres WINLINE Gjdpfxownx Ago Aadotu WINLINE is a modern and innovative machining centre dedicated to the production of wooden windows and doors components. WINLINE is performing the entire working cycles including the load /unload and the positioning of the parts for each needed operation, under the direct control of the NC. This new level of integrated automation can afford the highest level of precision. The machine is a real “one-man factory”: controlled by a single operator, performs the complete process on each component without the need of second passes, from squared planed all round parts to finished parts ready for assembly and painting process. It also gives the operator time to perform any further processing regarding the construction of a window: molding, sizing, assembly of the elements at the clamping machine, assembly of the hardware, assembly of the glass etc. WINLINE can produce any kind of window component, with any type of jointing (negative profile and dowels, mechanical fixing, open tenons, closed tenons...). The machine can perform the highest achievable level of productivity in each single case. Locking devices are engineered to ensure pieces stability and the highest level of precision, top constant quality surface in each operation and eliminates all kinds of marks and friction abrasions on finished parts, that in traditional systems may be caused by friction and sliding of the pieces on the handling device. WINLINE operating groups are engineered for heavy duty operations with high reliability. The machine can totally integrate with any cad/cam system allowing a direct transfer “from the project directly to the execution and production”. The base machine includes: Mobile gantry structure and double Y axis with independent carriages Pieces manipulator: loading, unloading and clamp exchange Automatic lubrication system Multizone system Automatic movement of panel supports Belt conveyor for chips and off-cuts removal Numerical control Personal computer desktop with 3D video card and LCD Electrical equipment conditioned air Documentation Maintenance equipment Remote keyboard Industry 4.0 - Integration with factory systems

Condition: used, _____ Description: Year of manuf. : 2020 Control : Sonstige WEISS CNC Centre width : 6 mm Gtsdpfov Armcox Aadou In Generel: ear of construction:2020 Control system:WEISS CNC Centre width:6 mm Centre height:200 mm Grinding wheel dimensions:400x60 mm + 0x60 mm Workpiece headstock: Speed:1 rpm Workpiece weight max.:25 kg Sanding diameter max.:390 mm Mounting:MK4 Grinding headstock: Peripheral speed:2 m/s Grinding disc dimensions right:0 x 60 mm Grinding disc dimensions left:400 x 60 mm X-axis:380 mm Z-axis:1,1 mm B-axis:torque motor, infinitely variable Tailstock: Pinole diameter: mm Pionole stroke:45 mm Mounting:MK 4 Cylinder fine adjustment:+/- 0.04 mm Equipment: Positioning sensors:Direct scales Grinding spindles:2x grinding spindle (left/right) GAP / Crash Controll:Structure-borne sound (Sensotronik) Balancing:MPM balancing device Workpiece measurement:Marposs PF ME Automation:Robot interface prepared Set-up mode:Electronic handwheel Emulsion mist separator:Mechanical Dresser:For external grinding wheel left/right Accessories:Various grinding discs + flanges

Condition: good (used), Swivel Spindle Milling Machine, Table Milling Machine, Bench Milling Machine Gsdpfxoh Nvyzj Aadotu -Spindle adjustment: height and angle -Swivel: -3° to 45° -Drive: 4.5/5.5 kW -Speed: 3000/4500/6000/9000/12000 rpm -Feed apparatus Holz-Her 3 rolls -Useful shaft length: 100 mm -Spindle: Ø 30 mm -Max. Milling cutter: Ø 220 mm -Dimensions: 1540/1100/H1520 mm -Weight: 962 kg