Planer and thicknessing machine

Casadei PFS 520 Tersa

Condition: new, - Sturdy steel and grey cast iron construction - Large, ribbed planing tables made of cast iron - Smooth operation due to high own weight - Four feed speeds - Motorized thicknessing table adjustment with two speeds and digital readout - Segment pressure bar at the infeed - Precision-mounted four-knife cutterblock - Helical gear steel infeed roller for particularly consistent and gentle timber feed - Outfeed roller with rubber coating - Large alloyed fence, tiltable from 90° to +45° - Auxiliary fence included as standard - Powerful industrial motor - Pneumatic quick-change system with pneumatic lifting and lowering of the jointer table - The extraction port position remains the same for both planing and thicknessing; no need for additional extraction hoses or awkward repositioning around the machine This item is covered by the 3-year Stürmer warranty with online registration. Warranty is valid for retail customers in Germany and Austria only. Manufacturer: SCM Group S.p.A. Via del Lavoro 1/3 – PO Box 168, 36016 Thiene-Vicenza, Italy Dimensions and weights: - Length (product): approx. 2300 mm - Width/depth (product): approx. 1100 mm - Net weight: approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Jointer table width: 520 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt range: 90° – 45° Dust extraction connection: - Extraction port diameter, thicknessing: 120 mm Installation information: - Required length: 2300 mm - Required width/depth: 1610 mm - Explanation: Dimensions account for maximum travel and usable length - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm - Note: Please add the specified working area dimensions to the required machine footprint to determine the recommended free installation space Thicknesser: Ncedou T Hq Sspfx Abvjp - Thicknessing table width: 520 mm - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical data: - Main drive motor power: 7 kW - Supply voltage: 400 V - Mains frequency: 50 Hz Planer cutterblock: - Cutterhead type: TERSA - Cutterhead diameter: 120 mm - Number of knives: 4 - Cutterhead speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2024 Equipment and technical specifications: Maximum professional configuration, optionally with Tersa or spiral cutter block Equipped with TERSA cutter block for tool-free, second-fast planer knife changes TERSA planer knife system allows for exceptionally quiet operation Helically serrated steel infeed roller for consistent and uniform material feed Material feed with two speeds, powered by a separate motor Extra-long surfacing tables for easy and precise dressing of workpieces Work tables made from annealed and stress-relieved cast iron, robust and permanently flat Simultaneously rearward-opening surfacing tables for minimal setup times Thickness table adjustment via handwheel with numerical height display High machine weight ensures maximum precision and vibration-free operation Powerful industrial motor Robust steel/cast iron construction Chip removal starting from 0.2 mm (at minimum workpiece thickness of 3 mm) due to helically serrated feed roller (ideal for economical planing of precious hardwood) Nsdsw Rhkqspfx Abvscp Quality – Made in Europe Equipment details: Tersa cutter block No adjustments or screwing required Blade changes in seconds Self-locking Exceptionally quiet operation Material feed: Helically serrated steel infeed rollers for consistent wood feed without markings Multiple teeth engage simultaneously for powerful feed Wear-free compared to rubber infeed rollers Permanently mounted extraction hood: With the fixed extraction hood, there is no need to change the extraction hose during retooling This saves valuable working time Simultaneous opening of surfacing tables: Both surfacing tables can be tilted up together, spring-assisted, for fast and convenient conversion to thicknessing mode in seconds Thickness table adjustment: FS 41 elite s with thickness table adjustment by handwheel and integrated indicator The thickness table is guided on four large-dimensioned spindles providing maximum stability in all operating conditions. A special lifting device keeps the table position perfectly stable even without locking. Anti-kickback devices: Massive anti-kickback devices prevent kickback of workpieces The 4-knife cutter block ensures optimal planing results Anodized aluminium surfacing fence: Large size (1200 x 150 mm) Easily adjustable Tiltable from 90° to 45° with scale Supplied with auxiliary fence for safe planing of narrow workpieces Digital version: With electric thickness table height adjustment and digital display Scope of delivery: Jointing/edge fence with round bar guide 2 feed speeds Tersa cutter block Technical Data Overall surfacing table length: 2200 mm Surfacing infeed table length: Surfacing table height: Surfacing working width: 410 mm Surfacing maximum cutting depth: 5 mm Surfacing fence dimensions: 1200 x 150 mm Surfacing fence tilt range: Thickness table dimensions: 775 x 410 mm Min. thicknessing height: 3 mm Max. thicknessing height: 240 mm Min. thicknessing workpiece length: Thicknessing feed speeds: 6 / 12 m/min Cutter block speed: 5000 rpm Cutter block diameter: 95 mm Number of planer knives: 4 pcs. Electric...

Condition: new, With a 520 mm planing width, motorized thickness table adjustment, and comfort switching - Stable steel and cast iron construction - Large, ribbed jointer tables made of cast iron - Smooth operation due to high dead weight - Four feed speeds - Motorized thickness table lift with two speeds and digital display - Segmented pressure beam at the infeed - Precision ball bearings on the four-knife cutterblock - Helical, hardened steel infeed roller for especially consistent and gentle wood feed - Outfeed roller with rubber coating - Large tiltable fence, adjustable from 90° to +45° - Standard auxiliary fence included - Powerful industrial motor - Pneumatic quick-change system with pneumatic raising and lowering of the jointer table - The extraction port remains in the same position for both jointing and thicknessing operations—no need for additional extraction hoses, inconvenient switching, or rerouting around the machine Scope of delivery: Technical Data: Dimensions and Weights: Ncedpoxnqyhsfx Abvop - Length (product): approx. 2300 mm - Width/Depth (product): approx. 1100 mm - Weight (net): approx. 980 kg Jointer: - Total table length: 2300 mm - Infeed table length: 1200 mm - Working height: 930 mm - Max. planing depth: 6 mm - Fence length: 1200 mm - Fence height: 190 mm - Fence tilt: 90 – 45° Extraction connection: - Extraction port diameter, thicknesser: 120 mm Installation Information: - Space requirement, length: 2300 mm - Space requirement, width/depth: 1610 mm Explanation: Max. travel paths or usable lengths are taken into account. - Machine body length: 1235 mm - Machine body width/depth: 850 mm - Working area length: 1000 mm - Working area width/depth: 3500 mm Note: Please add the working area to the space requirement to determine the recommended free installation space for the machine. Thicknesser: - Min. working height: 3.5 mm - Max. working height: 250 mm - Max. cutting depth: 8 mm Electrical Data: - Main drive motor power: 7 kW - Connection voltage: 400 V - Frequency: 50 Hz Cutterblock: - Cutterblock type: TERSA - Cutterblock diameter: 120 mm - Number of knives: 4 - Cutterblock speed: 5000 rpm - Max. planing width: 520 mm Feed: - Feed speed: 5/8/12/18 m/min

Condition: new, Year of construction: 2024, New machine Year of manufacture: 2023 Approximate dimensions: Length: 2,300 mm Width/Depth: 1,100 mm Weight: 980 kg Total table length: 2,300 mm Infeed table length: 1,200 mm Working height: 930 mm Maximum cutting depth: 6 mm Fence length: 1,200 mm Fence height: 190 mm Fence tilting range: 90° - 45° Thicknesser extraction port diameter: 120 mm Main motor: 7 kW Space requirement length: 2,300 mm Space requirement width/depth: 1,610 mm Space requirement explanation: The dimensions include maximum travel paths or usable lengths. Machine body length: 1,235 mm Machine body width/depth: 850 mm Length: 1,000 mm Width: 3,500 mm Note on working area: Please add the specified dimensions to the space requirement to determine the recommended clear installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Maximum cutting depth: 8 mm Connection voltage: 400 V Phases: 3-phase Nedpfxjxtgz Ee Abvjcp Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5,000 rpm Maximum planing width: 520 mm Feed speeds: 5/8/12/18 m/min Availability: short-term Location: Solingen

Condition: excellent (used), Robland 3200 silver line format saw with a trolley scoring saw with a separate engine, trolley length 320cm main engine 7KW 3 speeds max disc 450mm 0-45 tilt electrically adjustable with readout up-down saw electrically adjustable without readout culaga on the right side motorically adjustable up to 1240mm digital readers on the culaga on the trolley angle device included Nodov S Hy Aopfx Abvscp Branded machine in very good condition,

Condition: new, Year of construction: 2023, New machine Year of manufacture: 2023 Approx. length: 2300 mm Approx. width/depth: 1100 mm Approx. weight: 980 kg Total table length: 2300 mm Infeed table length: 1200 mm Working height: 930 mm Max. cutting depth: 6 mm Fence length: 1200 mm Fence height: 190 mm Tilting range of jointer fence: 90 - 45° Thicknessing extraction port diameter: 120 mm Main motor: 7 kW Required space, length: 2300 mm Required space, width/depth: 1610 mm Required space explanation: Dimensions include maximum travel distances or usable lengths. Machine body length: 1235 mm Machine body width/depth: 850 mm Length: 1000 mm Width: 3500 mm Working area explanation: Please add the specified dimensions to the required space to obtain the recommended free installation area for the machine. Minimum working height: 3.5 mm Maximum working height: 250 mm Max. cutting depth: 8 mm Connection voltage: 400 V Phases: 3~ Current type: AC Mains frequency: 50 Hz Type: TERSA Diameter: 120 mm Number of planer knives: 4 pcs Speed: 5000 rpm Max. planing width: 520 mm Ncedpfxew I U Nue Abvop Feed speed: 5/8/12/18 m/min Availability: Short-term Location: Solingen

Year of construction: 2018, condition: excellent (used), Maximum component weight: 75 kg Maximum moment load of the work table: 1250 g/mm Dimensions of work table: 800 x 890 mm Height of working table: 731 mm Measuring height: 500 mm Ncodpfxji Dagkj Abvsp Total height: 1675 mm

Condition: new, Year of construction: 2026, Technical specifications: • Extraction capacity ~ 5200 m3/h • Motor power 3.0 kW • Speed 3000 rpm • Voltage 400V, 50Hz • Suction connection 250/200mm • Filter area 13.7 m2 • Speed 28m/sec. • Number of filters 28 • Dimensions 752 x 1982 x 2144 mm • Weight 300kg • Category of filters G • Polyester filter material • Noise 80 dB without connection, 65 dB when connected to the machine via a pipe Delivery: - Fulfill H-2 Norms - 5 micron polyester filter - 2 containers - Running gear Ncjdpfjd H Rf Tjx Abvsp - Filter cleaning using a controlled vibration system + 850 euros for the models with fire extinguisher (Safe System)

Condition: new, GEOMET-2000 flow bench for calibrating a variable nozzle turbocharger without shaft rotation. This flow bench can calibrate the geometry of vacuum, air and electronically controlled turbochargers. Ncjdpfxen E N E Eo Abvop The equipment is adapted to the needs of workshops for repairing turbochargers of trucks and cars. It is also designed to work with large-sized or non-standard turbocharger designs; Flowbench GEOMET-2000 will allow a regular workshop to provide professional turbine repair services, thus gaining more customers. HIGHLIGHTS Adjusting the end stop position of the air flow control mechanism (variable geometry) will eliminate the "overblowing" effect, which is detrimental to the engine. Adjusting the length of the actuator rod to adjust the actuation timing of the air flow control mechanism. Evaluating the spring elasticity of the actuator for in-depth diagnostics of vacuum and pneumatic actuators. Checking the operation of the N75 valve for turbines with vacuum valve, which is involved in controlling the turbocharger on the vehicle. Tuning of electronically driven turbos is done by connecting to an external tester ATP-1000. Vertical position of the turbocharger and free working area - comfortable and efficient work with all types of turbochargers. KEY FEATURES • More than 6200 turbo references database • Creation of a test plan for a new turbine from the manufacturer. • All measurements are done in real time. • Calibration of the test bench before starting work • Automatic atmospheric pressure and temperature compensation • N75 valve testing function • Built-in blower pump to create a constant airflow • Self-developed Turbo Test software. • Creation and printing of reports on the tuning process. • Quick turbine installation thanks to magnetic adapters • Self-diagnostics SPECIFICATIONS Maximum productivity of the vacuum pump 180 m3 Required pressure in the pneumatic system 0,6 – 0,8 MPa Power supply 220V, 1Ph, 50Hz Power input 1,5 kW Dimensions 1190 х 520 х 1730 mm Weight 255 kg

Condition: good (used), Year of construction: 2012, functionality: fully functional, CNC machining center with edge banding for shaped workpieces Working dimensions for Y1 axis: X axis: 4,300 mm X axis pendulum operation: 1,620 mm Y axis: 1,320 mm Working dimensions for Y2 axis (edge processing): X axis: 3,300 mm X axis pendulum operation: 600 mm Y axis: 1,240 mm Work table: 8 ATS workpiece supports with 3 vacuum cups each 8 rear workpiece stops, program-controlled lowering, each mounted in one support 8 workpiece stops, 670 mm from rear, each mounted in one support 2 + 2 lateral workpiece stops 4 removable center stops 6 lift rails, pneumatically program-controlled lowering, for positioning heavy workpieces Automatic positioning of workpiece supports and vacuum cups via EPS (Electronic Positioning System) Automatic central lubrication Vacuum system divided into 2 separate work zones along the X axis Vacuum assist system for clamping templates Chip conveyor integrated into the machine table Vacuum pump 90 cbm/h Processing head equipment: Mounted on Z2 axis Drilling head BH 26 2L with: 16 vertical drilling spindles, individually selectable 2+2 horizontal drilling spindles in X direction 2+2 horizontal drilling spindles in Y direction Grooving saw, diameter 120 mm, fixed in X direction Grooving saw, diameter 120 mm, fixed in Y direction Milling spindle 13.2 kW (11 kW in S1 operation), HSK 63 F Mounted on Z1 axis Speed range 1,000 – 24,000 rpm Clockwise and counter-clockwise rotation C axis 360 degrees for adapter units Cleaning nozzle for cleaning the milled edge before the edge banding process Tool magazine for 16 tools Edge banding unit for workpieces up to 60 mm thickness Edge banding unit CNC controlled, with 360 degree endless rotation Glue application for hotmelt adhesive Double pressure roller, interchangeable and can be switched off Heating lamp for preheating edge band material End trim unit to cut the edge band material at an 8-degree angle to the workpiece edge using circular saw blade Technical data: Plastic edge thickness 0.4 – 3 mm (*) Solid wood edge thickness 0.4 – 2 mm (*) (Best results achieved using wood edges with primer from 0.4 – 1.2 mm) Max. edge height 64 mm Panel thickness min. 14 mm, max. 60 mm Min. inside radius 18 mm for edge thickness less than 1 mm Min. inside radius 30 mm for edge thickness 2 mm Min. panel size for edge banding: 300 x 300 mm Min. size for edge banding of internal cutouts: 350 mm, with plastic edge max. 1 mm thickness and max. panel thickness 18 mm Edge magazine for 2 rolls, positioned outside the machine—this solution limits pendulum processing. Roll diameter for edge material: 800 mm Ncedpjxraimefx Abvop Safety equipment: * Safety mats in front of the machine * Safety fence on the right with access door Without tools Control system: PC control with BIESSE WORKS ADVANCED Restart after emergency stop BIESSE WORKS office version Units: - Flush/radius trimming unit - Combination profile/flat scraper unit - Sawing unit