Edgebander

CEHISA Dynamic 9C - Motion

Condition: new, Year of construction: 2024, New machine Year of construction: 2024 Equipment and technical data: Nwodpfjt Hagnex Ah Uor Right-hand version Technical data: Overall dimensions: 1,900 x 1,410 mm Hopper opening: 1,044 x 1,044 mm Hopper height: 1,010 mm Hopper capacity: 1.1 m³ Drive power: 5.5 kW Briquette diameter: 50 mm Hydraulic oil: 160 l Throughput: up to 50 kg/h (depending on material) Paint finish: Weima Standard Connected load: 400 V +/- 5 % / 50 Hz including: Press mechanism with filling cylinder, main cylinder, gripper cylinder Connecting part for transport line Chrome-plated tongs Hydraulic tank 160 l with pump motor + valve control Safety switch for oil temperature Base plate 1,040 x 1,040 mm with agitator + motor and screw channel Screw channel Discharge screw + motor Side walls standard height 1,010 mm Base frame with rubber feet Switch cabinet on hopper and electrical control system Briquette length monitoring Automatic end position of all cylinders Manual control Automatic "On/Off" with level switch Material: Wood shavings, sawdust from solid wood, loose, clean and free of foreign matter*/ Dimensions: max. 12 mm Throughput capacity: approx. 50 m³/year/ * Specification foreign matter: Everything except wood, pieces of wood larger than 12 mm. The throughput capacity is highly dependent on the material. Average values are given. Depending on mixing ratio, moisture and material properties! Application not or not fully known/specified. Machine is sold appropriately and sold by the specialist dealer in accordance with the solution. In the event of heat build-up, the running time can be drastically reduced in accordance with the heating. Availability: short term Storage location: Solingen

Year of construction: 1998, condition: good (used), I sell the multiple drilling machine with inserting KOCH Sprint-PTP Year: 1998 Number of drilling spindles 1 Number of inserting heads 1 Programming Nwsdpfxsd Exwgs Ah Uor CNC-driven Z-axis Working width 1200mm Working height max. 36mm Available immediately

Year of construction: 2011, condition: excellent (used), Operating hours 1,523 hrs. - Edge thickness max. 8mm - PLC control (program controlled) Nwsdpfx Ahsma Sg Re Usr - glue height max. 60 mm - Joining unit in synchronous and counter-rotation (with diamond tools) - Gluing station cartridge - Pneumatic pressure unit - cross-cutting station pneumatic swiveling to 10 - Milling station motor adjustable (MOT4) DIA- tool - Keying station vertical pneumatic adjustable - swiveling pneumatic - Corner copying unit (diamond tool) - Radius scraper with motorized adjustment (MOT 2) - Surface scraper Dimensions: 454 cm length 120 cm width 161 cm height (upper edge of control panel)

Condition: used, Year of construction: 2013, Technical data Machine length: 6060 mm Machine width: 1555 mm Machine height: 2300 mm Weight: 2600 kg Total power input: 21 kW (30 A) Compressed air: 6 bar Air consumption: approx. 350 l/min Extraction: 2820 m³/h (at 28 m/s) Technical features and equipment General functions Workpiece thickness: 8–60 mm Max. feed speed: 18 m/min Double pressure from above for stability of the part Electronic thickness control Frequency converter for feed Automatic lubrication of the feed chain Automatic motor calibration Touch control system Emulsion spray at the inlet and outlet Edge preheating Nodpfx Ahsv Szt De Uswr Pre-milling unit Tool diameter: 100 mm Tool height: 63 mm Diamond tool with replaceable knives Motorized removal adjustment Gluing unit Glue and hot air application Heated application roller Quick exchange of the entire unit Automatic position adjustment via motor 3 pressure rollers Edging speed: 14 m/min Cutting unit Twin-motor unit with automatic tilting Tilt up to 15° THK prismatic guide Radius milling unit 2 tools Automatic adjustment in two axes Automatic overlap adjustment Copying unit (2 motors) Automatic tool position change by servo motor Electromagnetic horizontal movement Vertical hydraulically damped movement

Condition: like new (used), Year of construction: 2022, functionality: fully functional, HOMAG EDGETEQ S-500 (OPTIMAT KAL 375/16/V25) Year of manufacture: 2022 Serial number: 0-200-73-4868 Nwodpfxsxwurye Ah Uer Excellent condition – used only for demonstration and sample production. The machine has been professionally maintained and is immediately available for inspection in Slovenia. Technical specifications and equipment: - Continuously adjustable feed speed: 16–25 m/min - Workpiece thickness: 8–60 mm - Fixed fence on the left-hand side - Adjustable working height - Pre-installed for LOOPTEQ O-200 / O-300 return system - Feed lock system - Workpiece alignment at infeed with roller support - Top pressure unit - Sizing package with DIA joint trimming cutter set WD40 - Gluing package with preheating up to 60 mm thickness - Adhesive application system with emptying function - Edge magazine with two vertical roll holders - Pressure zone - PERFORMANCE2 package - End trimming unit PK25 - Rough trimming unit BF10 (I-HM straight cutter set) - Profile trimming unit FF32 top/bottom WD60 with FLEXTRIM quick-change system (2 radii) - Multi-scraper MN21 automatic with profile knife set - Cleaning agent spraying unit - Glue joint scraper FA20 BASIC - Buffing unit FP10 top and bottom - PowerControl PC23 PowerTouch control system - TAPIO Ready - Ethernet network connection - Wired manual control for setup operation - WOODCOMMANDER software package with MMR data logging, ToolManager, speed adjustment for track control, and full diagnostic functions - Documentation in Slovenian (digital and paper format) - Remote service enabled

Condition: used, Year of construction: 2011, total length: 4,000 mm, total height: 1,600 mm, total width: 970 mm, Weight: 1.300 kg Price: On request - Year: 2011 - Documentation available: No - CE marking present: Yes - CE certificate present: No - Serial number: AH/115214 - Number of units [pcs]: 6 - └ 1st unit type: Pre-milling unit - └ 2nd unit type: Glue unit - └ 3rd unit type: Cap unit - └ 4th unit type: Rough milling unit - └ 5th unit type: Radius scraping unit - └ 6th unit type: Flat scraping unit - Max. edge band thickness [mm]: 6 - Max. panel thickness [mm]: 60 - Min. panel length [mm]: 140 - Max. feed speed [m/min]: 11 - Voltage [V]: 400 - Current consumption [A]: 23 - Transport dimensions: 4000mm x 975mm x 1600mm (l x w x h) - Transport weight [kg]: 1300kg - Transport packages [pcs.]: 1 Financial information VAT: The price shown is exclusive of VAT Nodpswnickefx Ah Uswr VAT/margin: VAT deductible for entrepreneurs Delivery and trade-in always possible for everything in the industrial sectors Yorick Diebels

Condition: excellent (used), Year of construction: 2023, functionality: fully functional, Morbidelli X 400 cnc machine with flat (nesting) table Nedpfx Asxqzm Doh Uewr

Condition: good (used), Code: 0247 Brand: SCM Model: L'INVINCIBILE SI 6000 - CE Standard Automatic panel saw with TOUCH SCREEN VANGUARD electronic control and tilting blade with scoring unit for precise cutting of panels, furniture, custom-made furnishings, kitchens, window frames, doors, plastics, composite materials, and various - CE Standard Sturdy structure to ensure maximum working precision Cast iron worktop with extension top Patented SCM sliding carriage in extruded aluminum with large section, rigid and with closed lattice structure for maximum resistance even with heavy loads Parallel guide with precision at 25 m/min Automatic adjustment of scoring unit 2 digital displays on the square guide VANGUARD TOUCH SCREEN control - Manual, semi-automatic, and automatic modes - Operator assistance system - 12-inch color video and Touch Screen function Full Support frame tiltable from + 50° to - 50° for angled cuts with panels of any size Overhead control panel Start/stop buttons integrated into the carriage Technical data: Carriage length 3200 mm Extendable fence for square cuts up to 3200 mm Cutting width with parallel fence 1500 mm Blade diameter 400 mm F30 Scoring blade diameter 120 mm F20 Max cutting height at 90° 130 mm Max cutting height at 45° 92 mm Blade motor power 7,5 Hp Scoring blade motor power 0,75 hp Suction port diameter mm 120/100 Overall dimensions of assembled machine mm 3400 x 4300 x 1720 h Overall dimensions for transport mm 3400 x 2350 x 1720 h Nedpoxz Ekbefx Ah Ujwr Weight kg 1380

Condition: excellent (used), Year of construction: 2002, functionality: fully functional, input voltage: 380 V, extraction connection diameter: 120 mm, saw blade bore: 30 mm, cutting depth: 110 mm, main saw diameter: 400 mm, extraction nozzle diameter: 120 mm, length stop: 3,200 mm, working width: 1,100 mm, Equipment: motor brake, Format 4 x motion in excellent condition, always worked on by 1 person Nwsdpfx Ahsv Aywpj Usr

Condition: excellent (used), SCM F520 CE leveling machine Nodpfx Ahondhdtj Uowr Working width 520mm 4kw motor 4 knife shaft Traditional knives Hydraulic lifting and lowering of the work surface Main fence adjustable up to 45 Tops length 3000mm CE certificate