Used other lathes for sale (255)

Year of construction: 1977, condition: used, Offered is a conventional center lathe with lead screw and feed rod. Thread cutting: metric and imperial threads. Speed and feed selection: mechanically via gearbox. Workpiece clamping: three-jaw chuck. Tool holder: four-way tool post. Equipped with longitudinal and cross slides, tailstock with quill, lead screw and feed rod, digital position readout and work light. Inspection possible by arrangement. Nsds Afplujpfx Ah Sodc

Year of construction: 2016, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the item within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 0307-1866 Operating hours: 9,316 h Nodoz Uhydepfx Ah Sedc Control system: Siemens SINUMERIK 840 Dsl Working height: approx. 1,300 mm Electrical Data Operating voltage: 400 V Frequency: 50 Hz Rated current: 315 A Workpiece Area Workpiece length: min. 780 mm Workpiece length: max. 3,000 mm Workpiece diameter: min. 20 mm Workpiece diameter: max. 200 mm Workpiece weight: max. 250 kg Workpiece Drive and Clamping Workpiece drive/clamping: 2 × hydraulically actuated front chucks, manufacturer SAV Chuck bore: max. 210 mm Spindles Spindle power: 2 × 37 kW Speed: 2,200 rpm Cross slide NC1, left X1-axis: 450 mm Z1-axis: 1,980 mm Cross slide NC2, right X2-axis: 450 mm Z2-axis: 1,980 mm M-head slide Q1-axis, left: 1,980 mm Q2-axis, right: 1,980 mm Tailstock and steady rest slide W1-axis, left: 1,980 mm W2-axis, right: 1,980 mm Rapid Traverse Rapid traverse speed: max. 20 m/min EQUIPMENT Portal loading system PROMAT 2 loading units Chip conveyor Coolant system Matching VDI 50 tool holders Partially powered VDI 50 tool holders Chuck jaws Documentation

Year of construction: 2000, condition: ready for operation (used), functionality: fully functional, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period from November 16th to November 26th. TECHNICAL DETAILS General Information Machine Number: 00071830 Hours Read: 3,143 h Control System: Siemens Sinumerik Electrical Data Operating Voltage: 400 V Frequency: 50 Hz Control Voltage: 24 V Rated Power: 150 kW Working Area Maximum Height: 1,270 mm Number of Turrets: 2 Workpiece Length: min. 700 mm Workpiece Length: max. 2,400 mm Workpiece Diameter: min. 50 mm Workpiece Diameter: max. 200 mm Main Spindle Main Spindle Drive Power: 2 × 37 kW Chuck Bore: max. 210 mm Chuck Data Piston Stroke: 25 mm Stroke per Jaw: 11.1 mm Actuation Force: max. 52.5 kN Actuation Pressure: max. 30 bar Speed: max. 2,000 rpm Transport Transport: possible on a standard truck EQUIPMENT Loading System Large quantity of VDI 50 tool holders Partially powered VDI 50 tool holders Partially standard VDI 50 tool holders Workbench Workshop drawer cabinet Njdpfx Ao Aaqz Toh Ssdc Extensive documentation

Year of construction: 1996, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 9611-1806, No minimum price – guaranteed sale to the highest bidder! Submitting a bid obligates you to collect the machine within the period of November 16th to November 26th. TECHNICAL DETAILS General Information Machine number: 9611-1806 Control system: Siemens SINUMERIK Electrical Data Operating voltage: 380 V Frequency: 50 Hz Control voltage: 220 V Working Area Maximum turning height: 1,240 mm Maximum turning length: 2,000 mm Spindle bore: 130 mm Chuck diameter: max. 130 mm Torque: max. 460 Nm Cross slide travel: 200 mm Tool Holder Tool holder: VDI 40 Tailstock Taper: MK 5 Tailstock diameter: 90 mm Automatic tailstock quill travel: max. 150 mm Transport Transport: possible on a standard truck EQUIPMENT Workshop cabinet Nedoz Uql Aspfx Ah Ssdc Large quantity of VDI 40 tool holders Coolant system Loading system

Condition: used, Offered is a conventional shaft lathe with tailstock. Swing over bed: 630mm. Swing over cross slide: 360mm. Center height above bed: 286mm. Spindle bore: 60mm. Spindle diameter at front bearing: 140mm. Number of spindle speeds: 30. Number of longitudinal feed steps: 41. Number of cross feed steps: 41. Longitudinal feed: 0.064-6mm/rev. Cross feed: 0.025-2.32mm/rev. Maximum workpiece weight according to manufacturer: 6000kg. Metric thread pitches: 0.219-48mm. Equipped with a large chuck, tailstock, four-way tool post, longitudinal and cross slides, as well as mechanical control levers and handwheels. Inspection possible by arrangement. Neds Afpk Ropfx Ah Sedc

Condition: used, Offered is a facing lathe with a large faceplate. Swing diameter over foundation plates: 2480mm. Center height above foundation plates: 1250mm. Faceplate diameter: 1600mm. Maximum faceplate torque: 14000Nm. Main spindle bore: 100mm. Front main spindle bearing diameter: 240mm. Turning tool shank cross-section: 50 × 50mm. Equipped with four chuck jaws, movable bed-mounted carriage, cross slide, tool holder, mechanical control levers and handwheels. Ndsdpfxe Afplhs Ah Sjc

Condition: used, Offered is a single-column vertical turret lathe with tool turret. Equipped with a large rotary table with radial clamping slots, clamping brackets, vertical tool slide with turret head, digital position readout, work light and separate control panel. Inspection possible by arrangement. Node Afplbopfx Ah Ssdc

Condition: used, Offered 250mm. Feed steps: 12. Cross-bed feed: 0.05-3mm/rev. Carriage and rotating section feed: 0.04-2.5mm/rev. Feed motor speed: 1000rpm. Feed motor power: 2.2kW. Permissible workpiece weight, cantilevered with a center of gravity distance of 300mm: approx. 5000kg. Permissible workpiece weight between centers, without additional support: 20000kg. Equipped with a large faceplate with clamping devices, cross-bed support, movable tool slide and mechanical lever controls. Inspection possible by arrangement. Nodpfx Ahj Afpkqs Sedc

Year of construction: 1955, condition: used, Union model L.2.A.S. 5" x 24" Lathe. Backgeared and Screwcutting lathe with a detachable gap bed. A practical and characterful old lathe that works well and has plenty of capacity in a compact size. From the family agricultural engineering workshop, which is now sold, hence the lathe is for sale. 3-phase 415v, so ideal for conversion to variable-speed drive from a 1-phase to 3-phase inverter (not included). 3-jaw chuck, faceplate and a collection of changewheels for screwcutting. It works. I can send a video of it running. Buyer to arrange and fund the shipment. Ndodpfxoz Hifds Ah Sjc Foklifting onto your van / truck may be possible with the agreement of the new property owner. Please contact me if you would like to arrange this. Location is near Kings Lynn, Norfolk, UK. If you have any questions or need more information, feel free to send us a message or give us a call.

Condition: used, Year of construction: 1982, functionality: fully functional, total length: 2,575 mm, total width: 1,110 mm, total height: 1,450 mm, type of input current: three-phase, overall weight: 1,550 kg, Accessories: 200 mm chuck, rotating center for the tailstock, micrometer stop for longitudinal feed, chip and coolant emulsion tray including pump, lighting, technical documentation. Basic technical parameters: Swing over bed 400 mm, Swing over carriage 220 mm, Swing in gap 600 mm, Gap width 230 mm, Turning length 1000 mm, Spindle bore 50.5 mm, Spindle taper Morse 6, Tailstock center taper Morse 5, Spindle speeds: Number of steps 12, Range 1st range 45-2000 rpm, 2nd range 22-1000 rpm, Maximum tool section 30 x 20 mm, Max. workpiece weight clamped in centers 300 kg, Main motor power 5.5 kW, Machine dimensions L x W x H: 2575 x 1110 x 1450 mm, Machine weight 1550 kg. The machine can be viewed and fully tested in our warehouse in Přerov by prior arrangement. Ndodez Tdcfspfx Ah Sjc

Year of construction: 2018, condition: used, Control system Okuma OSP P300L (OSP Suite, 15") MACHINE Number of axes: 2 Max swing over bed: Ø670 mm Max swing over cross slide: Ø480 mm Max turning length: 1500 mm Max turning diameter: Ø480 mm SPINDLE Spindle diameter, front bearing: Ø140 mm Spindle bore: Ø91 mm Spindle nose: JIS A2-8 Speed range: 42–4200 rpm Front spindle bearings: Roller bearings, axial angular contact ball bearings Torque: 700 Nm Spindle material: CrMo X-AXIS Travel: 300 mm Rapid traverse: 25 m/min Z-AXIS Travel: 1590 mm Rapid traverse: 30 m/min TURRET Type: V12, NC turret Number of tools: 12 Indexing time: 0.24 s/station Tool mounting: MQ TAILSTOCK Quill diameter: Ø100 mm Stroke: 1530 mm Taper: MT No. 5 MOTORS Spindle motor: PREX 30/22 kW (30 min/cont.) X-axis: BL 3.5 kW Z-axis: BL 4.6 kW MACHINE DIMENSIONS Height: approx. 2200 mm Floor space: approx. 4200 × 2400 mm Weight: approx. 8500 kg (standard machine) STANDARD EQUIPMENT - MQ turret, 12 stations (excl. tool holders) NC-controlled tailstock MT No. 5, live center MT No. 4 Coolant system with high-pressure pump Work light Fully enclosed chip and splash guard Chuck open/close via M-code and foot pedal ("double type") Manual Touch Setter Central lubrication (monitoring type B-1) Hand tools Built to IEC standard incl. CE marking and EMC - Conversational programming One Touch IGF-ME kit INCLUDED OPTIONS Spindle orientation Cutting load monitoring "Load monitor" for all axes and spindles Nsdpe Aa At Ijfx Ah Sedc Automatic door C1500, left + right Shower/flush coolant type B (M-code) Air blow for chuck and tailstock (quill) Hydraulic quill movement 60 mm, built-in quill MT No. 4 - Prepared extraction port - Absoscale for X- and Z-axis Turcuite for X- and Z-axis incl. "0.1 micron control" Steady rest SMW-Autoblok SLU-X 3.1 Ø20–165 mm with automatic tow-along positioning Grundfos pump 12 bar CR1-9 Cromar chip conveyor (hinged belt), chip discharge to the right

Condition: not inspected (used), machine/vehicle number: 42893, Lead screw and feed spindle lathe, manufacturer: ZMM/Bulgaria, type: L400 TS, serial number: 42893, year of manufacture: unknown, turning length: 1,000 mm, up to 2,180 rpm, 3-axis digital display, manufacturer: Facor, Multifix steel tool holder, coolant system, tailstock, light, splash guard, 3 steady rests, 4-jaw chuck, accessories. Nsdpfx Aoz R Nalsh Sodc

Condition: used, Year of construction: 1989, functionality: fully functional, workpiece weight (max.): 13,000 kg, PARALLEL LATHE used, 500x5000mm, TIANSHUI SPARK mod. CW61100E, year '89: Center height mm 500, Max turning diameter on bed mm 1000, Max turning diameter on carriage mm 680, Distance between centers mm 5000, Bar passage mm 140, Spindle nose attachment: ASA 11, Spindle speed: 5 - 400, Spindle power: 36 Kw, Overall dimensions mm (LxWxH) 7100x2500x1700, Machine includes: 4-jaw independent self-centering chuck mm 1000, Fixed steady rest, Fixed steady rest mm 460, Ndjdpfx Ahozg Tz Ss Sjc Traveling steady rest mm 220, Tailstock with Metric 80 taper, Tool turret type: rotary, fixed, Coolant system.

Year of construction: 1995, condition: used, Machine description This used SOMAB TRANSMAB 500 CNC lathe, built in 1995 in Moulins (France), is a horizontal CNC turning machine weighing 8,100 kg. It features a NUM CNC control with NUM Servomac drives, a 12-station tool turret fitted with Kennametal tool holders, a jaw chuck and a tailstock operated from the control panel. Installed power is 30 kW on 400 V three-phase, 50 Hz. The panel includes an electronic handwheel, spindle and feed override dials and manual or automatic coolant control. Applications Njdpfx Asz H Rc Roh Sjdc This CNC lathe machines turned parts, one-off or in batches: turning, boring, facing and threading of metal parts. It suits general engineering workshops, industrial subcontractors, hydraulics, toolmaking and maintenance shops. Key features / Advantages SOMAB is a French CNC lathe manufacturer based in Moulins. The NUM control is widely used in France, which makes maintenance and finding skilled operators easier. At 8,100 kg, the TRANSMAB 500 is a heavy machine suited to medium to large workpieces. The 12-station turret and tooling are already in place, so it is easy to put back to work. Second-hand CNC lathe for sale at All Metal, specialist in used industrial machinery. Depth: 240 Height: 250 Length: 380 Weight: 8100

Condition: used, Year of construction: 1996, operating hours: 22,400 h, functionality: fully functional, machine/vehicle number: 474, -Weiler -E50/1 -No.: 474 Ndjdpfey U Iqgsx Ah Sec -Year of manufacture: 1996 -Operating hours: approx. 22,400 -Voest-Alpine Steinel control system (the control system likely operated via a separate desktop PC) -Includes chip conveyor, various tool holders, and tools Shipping possible upon request. Sale only to commercial businesses. Stated purchase price = net price plus 19% VAT = €9,282.00 gross.

Year of construction: 2020, condition: ready for operation (used), functionality: fully functional, WMW Niles, Czech Republic Made, CNC(Siemens Controls, Retrofitted in 2020) Floor Type Heavy Duty Lathe ,With heavy Duty Tail Stock, Steady Rest, Rollers, and with 6000 MM X 4000 MM Floor plates Nodpfxjzww R So Ah Ssdc

Condition: like new (used), Year of construction: 2021, FMT Tarnów LZ 400S – 2021 – 1000 mm – excellent condition For sale: FMT Tarnów LZ 400S universal lathe, manufactured in 2021. The machine has been used very little and is in very good technical and visual condition. It features a modern, robust design from the Polish manufacturer, Fabryka Maszyn Tarnów. The lathe is equipped with an ISKRA NP-20T-V digital position readout, a cooling system, and a quick-change tool clamping system with additional toolholders. The machine is ready for operation. TECHNICAL DATA Working parameters: * Center distance: 1000 mm * Swing over bed/cross slide: 390 mm * Swing over carriage: 225 mm * Bed width (upper part): 260 mm * Maximum workpiece weight in centers: 200 kg * Coolant tank capacity: 20 l Headstock: * Spindle nose: DIN 55027-6 (PN-C6) * Spindle bore: 62 mm * Spindle internal taper: DIN 228 ME70 * Spindle speed range: 30–3000 rpm * Main drive motor power: 7.5 kW Tailstock: * Quill travel: 110 mm * Quill diameter: 60 mm * Quill taper: Morse 4 Feeds: * Longitudinal feed range: 0.025–2.0 mm/rev * Cross feed range: 0.012–1.0 mm/rev Threads: * Metric threads: 0.2–14.0 mm * Whitworth threads: 80–1.5 tpi * Module threads: 0.1–7.0 * Diametral Pitch threads: 200–3.5 EQUIPMENT * ISKRA NP-20T-V digital position readout * 3-jaw chuck * Quick-change tool post * Several additional quick-change toolholders * Tailstock * Drill chuck for tailstock * Cooling system * Additional jaws and accessories as shown in the pictures * Work area lighting * Documentation DIMENSIONS AND WEIGHT Nodpfx Ahoz D T T Hj Sedc * Length: 2100 mm * Width: 1080 mm * Height: 1520 mm * Weight: 1800 kg * Power supply: 400 V * Total installed power: 9 kW Manufacturer: Fabryka Maszyn Tarnów (FMT) Model: LZ 400S Year of manufacture: 2021 Turning length: 1000 mm Serial number: 40S213438 The machine is in very good condition and shows only minor signs of use.

Condition: used, Year of construction: 2013, functionality: limited functionality, machine/vehicle number: 105032, Technical characteristics: Work Area - Maximum clamping plate diameter: 160 mm - Maximum turning diameter: 160 mm - Maximum machining diameter: 100 mm - Maximum workpiece length: 150 mm - X-axis travel: 700 mm / Rapid traverse in X: 60 m/min - Z-axis travel: 375 mm / Rapid traverse in Z: 30 m/min - Standard integrated automation (number of loading nests by workpiece diameter: 14/(80...200), 18/(30...160), 30/(30...85)) Main Spindle - Spindle according to DIN 55026: Size A5 - Maximum spindle speed: 6,000 rpm - Spindle power (100%/40% duty cycle): 18.1 / 13.9 kW - Spindle torque (100%/40% duty cycle): 77 / 59 Nm Tool Turret with Driven Tools - Tool holders according to DIN 69880: 12 positions - BMT65 - Maximum tool length including holder: 190 mm - Maximum tool speed: 6,000 rpm - Maximum torque: 27 Nm (10% duty cycle), 14 Nm (100% duty cycle) Electrical Equipment - Operating voltage: 400–480 V, 80 A - Connected load: 27 kVA Dimensions - Overall dimensions: Length = 4,350 mm (with chip conveyor), Width = 1,600 mm, Height = 2,500 mm - Weight: 5,500 kg Main Features and Capabilities: - Vertical Design: Optimised for chip evacuation and easy loading/unloading - Control: GE Fanuc FS 32i B - High Precision: Positioning accuracy on X and Z axes ±0.001 mm, Haidenhain linear scales - Main Spindle: High power output and wide speed range Ndjdpfoxxwztjx Ah Sec - In-process Control: Marposs T25 measurement probe - Automated Loading/Unloading: Parts are automatically loaded and unloaded by integrated automation - Live Tooling: Capable of drilling and milling with driven tools - Tool Life Monitoring with Sister Tool Management - Chip Conveyor, Coolant System, Switchable Dual Cartridge Filter, High Pressure Pump (15 bar) - Fully Enclosed Work Area, Work Area Lighting - Documentation: Electronic available; paper manual not complete Machine Condition: WORKING - Operator panel safety switch is broken

Condition: used, Year of construction: 2016, functionality: limited functionality, machine/vehicle number: MW127, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Max. speed: Left spindle 3000 rpm - Power at 100% duty cycle: Left spindle - 15 kW / Right spindle - 7.5 kW - Max. swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Counter-Spindle: - Spindle speed: 6000 rpm - Max. bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Tool Holder with Driven Tools - Tool interface: Okuma interface Nodpfjxxihfsx Ah Sjdc - Number of tool stations: 12-position lower turret, all positions driven - Max. speed: 4500 rpm / Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V 3-phase, fused at 151A - Connected load: 22.5 kVA Machine Dimensions - Dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities - Horizontal design: optimized chip evacuation, parts catcher and custom-made parts conveyor - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measuring system (Q Setter) - Broken tool detection: Load force auto-learning analyzer controlled by OSP-P300L-R - Part detection at counter spindle: low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and in printed format Machine Status: Currently operating with main spindle only - sub spindle requires repair OPTIONAL: Bar feeder: TopAutomazione model Fu352 SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg

Condition: used, Year of construction: 2016, functionality: fully functional, machine/vehicle number: MW141, Technical characteristics: Work area # Maximum turning diameter: 300 mm # Maximum workpiece length: 276 mm # X-axis travel: 250 mm / Rapid traverse X: 24 m/min # Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min # W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle # Spindle mount: A2-8 # Maximum spindle speed: Left 3000 rpm # Continuous power (100% duty cycle): Left - 15 kW / Right - 7.5 kW # Max workpiece diameter over bed: 520 mm # C-axis indexing accuracy: 0.001° # Bar capacity: Left spindle - 80 mm / Right spindle - 53 mm Ndsdpfx Ahjxxifko Soc Counter-Spindle: # Spindle speed: 6000 rpm # Max bar diameter: 53 mm # C-axis indexing accuracy: 0.001° # Travel: 520 mm Motorized Tool Turret # Tool interface: Okuma interface # Number of stations: 12-position lower turret, all stations powered # Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical equipment # Supply voltage: 400V 3-phase # Connected load: 22.5 kVA Dimensions # Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm; Weight: 5500 kg Main features and capabilities: # Horizontal design: optimal chip evacuation, parts catcher + custom parts conveyor belt # Additional coolant tank with 10 bar pressure for cutting tool cooling # CNC control: OSP-P300L-R # Chip conveyor # Fire protection system # Tool measuring system (Q SETTER) # Broken tool detection: Load force auto-learning analyzer managed by OSP-P300L-R # Workpiece detection on counter-spindle: Low-pressure compressed air sensors # Spindle cooling system # Documentation: Available electronically and as hardcopy Optional: Bar feeder: FMB model Turbo 10-72XT/3200/A # Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm; Weight: 1500 kg Machine status: In operation

Condition: used, Year of construction: 2006, functionality: fully functional, machine/vehicle number: M301809, Technical characteristics: Work Area # Maximum turning diameter: 270 mm # Maximum machining diameter: 215 mm # Maximum workpiece length: 780 mm # Distance between spindle noses: min. 250mm/max. 1100mm # X1/X2 axis travel: 195 mm / Rapid traverse X: 30 m/min # Z1/Z2 axis travel: 780 mm / Rapid traverse Z: 30 m/min # Y-axis (Upper Turret) travel: +/- 60 mm / Rapid traverse Y: 30 m/min # B-axis travel (Right Spindle): 850 mm / Rapid traverse B: 30 m/min Spindles # Spindle DIN 55026: Size A26 # Max speed: Left 4,500 rpm / Right 4,500 rpm # Power with 100% ED: Left – 15 kW / Right – 15 kW # Main spindle feature: Optional dual-stage clamping cycle # Bar capacity: Left spindle - 80 mm / Right spindle - 80 mm Tool Holder with Driven Tools # Tool interface: BMT55 # Number of positions: 12-station disc turret, all positions driven # Max speed: 3,600 rpm, Milling drive power: 5.5 kW Electrical Equipment # Operating voltage: 400V 3-phase, fuse 217A GL # Connected load: 71.9 kVA Dimensions Ndedpfoxxv A Asx Ah Sec # Machine dimensions (L×W×H): 4,059 × 2,314 × 2,225 mm # Weight: 14,000 kg Main Features and Capabilities: # Horizontal design: Optimal chip evacuation and straightforward loading/unloading # CNC Control: Fanuc 18i-TB 2CPU, 2-channel control # Upgraded hydraulic unit: Hazabal S.L. GH1018/008 # Chip conveyor # Bar feeder interface # Automation interface available # Documentation: Electronic and hard copy available Machine status: Operational (in production)

Condition: used, Year of construction: 2017, functionality: limited functionality, machine/vehicle number: MW149, Technical specifications: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse in X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse in Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse in Z: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left spindle 3000 rpm - Continuous power (100% duty cycle): Left spindle – 15 kW / Right spindle – 7.5 kW - Maximum swing over bed: 520 mm - C-axis indexing accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Sub-Spindle (Counter Spindle) - Spindle speed: 6000 rpm - Maximum bar diameter: 53 mm - C-axis indexing accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-position lower turret, all driven stations - Maximum speed: 4500 rpm, Milling motor power: 4.5 kW Electrical System - Operating voltage: 400V 3-phase, fuse protection 151A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3200 × 2200 × 1900 mm - Weight: 5500 kg Main Features and Capabilities: - Horizontal design for optimal chip evacuation - Parts catcher and custom-made parts conveyor strip - Additional emulsion tank with 10 bar pressure for cutting tool cooling - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system - Tool measurement system (Q SETTER) - Broken tool detection: Load force auto learning analyzer, controlled by OSP-P300L-R - Part detection at sub spindle with low-pressure compressed air gauges - Spindle cooling system - Documentation: available electronically and as manual Option: Bar feeder: TopAutomazione FU352SX - Bar feeder dimensions (L×W×H): 3500 × 800 × 1200 mm - Weight: 1500 kg Ndedpfxjxxiiie Ah Ssc Machine status: Machine operational only with main spindle – sub spindle requires repair.

Condition: used, Year of construction: 2015, functionality: limited functionality, machine/vehicle number: MW130, Technical characteristics: Work Area - Maximum turning diameter: 300 mm - Maximum workpiece length: 276 mm - X-axis travel: 250 mm / Rapid traverse X: 24 m/min - Z-axis travel: 460 mm / Rapid traverse Z: 24 m/min - W-axis travel: 520 mm / Rapid traverse W: 24 m/min Main Spindle - Spindle nose: A2-8 - Maximum speed: Left 3,000 rpm - Continuous power (100% duty cycle): Left – 15 kW / Right – 7.5 kW - Maximum swing over bed: 520 mm - C-axis positioning accuracy: 0.001° - Bar capacity: Left spindle – 80 mm / Right spindle – 53 mm Counter-Spindle: - Spindle speed: 6,000 rpm - Maximum bar diameter: 53 mm - C-axis positioning accuracy: 0.001° - Travel: 520 mm Turret with Driven Tools - Tool interface: Okuma interface - Number of stations: 12-station lower turret, all positions driven - Maximum milling speed: 4,500 rpm - Milling motor power: 4.5 kW Electrical Equipment - Operating voltage: 400V, 3-phase, fuse: 151 A - Connected load: 22.5 kVA Dimensions - Machine dimensions (L×W×H): 3,200 × 2,200 × 1,900 mm - Weight: 5,500 kg Main Features and Capabilities: - Horizontal construction: Optimal chip evacuation, parts catcher + custom parts conveyor belt - CNC control: OSP-P300L-R - Chip conveyor - Fire protection system Ndodpfx Ajxxrbbsh Soc - Tool measuring system (Q SETTER) - Broken tool detection system: Load monitoring auto-learning analyzer controlled by OSP-P300L-R - Workpiece detection on counter-spindle: Low-pressure compressed air gauges - Spindle cooling system - Documentation: Available electronically and as a hard copy Machine status: Operative only with main spindle – sub spindle requires repair Optional Equipment - Bar feeder: TopAutomazione model FU352 - Bar feeder dimensions (L×W×H): 3,500 × 800 × 1,200 mm - Weight: 1,500 kg

Condition: used, Including accessories. Inspection possible by prior arrangement. Njdpfxe Aalnuo Ah Sjdc

Condition: used, Year of construction: 1997, functionality: fully functional, machine/vehicle number: W301002, Technical characteristics: Work Area # Maximum turning diameter: 270 mm # Maximum machining diameter: 215 mm # Maximum workpiece length: 265 mm # Distance between spindle noses: 1080 mm Ndedpoxw Uh Iefx Ah Sjc # X1/X2-axis travel: 195 mm / Rapid traverse in X: 12 m/min # Z1/Z2-axis travel: 265/780 mm / Rapid traverse in Z: 24 m/min # B-axis travel (right spindle): 850 mm / Rapid traverse in Z: 24 m/min Spindles # Spindle as per DIN 55026: Size A2-6 # Maximum speed: Left & Right 50–5000 rpm # Power at 100% duty cycle: Left 11 kW / Right 11 kW # Main spindle special feature: Optional dual command clamping cycle for 2-stage chuck clamping # Bar capacity: Left spindle 51 mm / Right spindle 51 mm Two Tool Turrets # Tool interface: BMT55 # Number of stations: 12-position disc turret Electrical Equipment # Operating voltage: 200/220VAC +10%/–15%, single-phase, 50/60 Hz # Connected load: 54 kVA (connection 61 VA) Dimensions # Machine dimensions (L×W×H): 3645 × 1875 × 1970 mm # Weight: 10,800 kg Main Features and Capabilities: # Horizontal construction: Optimal chip evacuation and easy part handling # CNC control: Fanuc 6i-TT # Chip conveyor # Automation interface for gantry loader available # Main spindle fitted with Autoblock Chuck 265 TXS # Each turret equipped with 2 external tool holders # Documentation: Electronic not available / Hardcopy available Machine status: RUNNING/IN OPERATION