CNC Sliding head lathe

CITIZEN Cincom M20C

Condition: used, Year of construction: 2011, Technical details: turning length: 310 mm swing diameter over bed: 500 mm swing diameter over bed slide: 290 mm centre distance: 500 mm x-axis: 190 mm z-axis: z1: 335 / z3: 370 mm y-axis: 80 mm revolution per minute: 6000 U/min Control: Heidenhain CNC Pilot 4290 spindle bore: 73 mm bar material dia.: 50 mm tool turret - number of stations: 12 tool taper: VDI 30 mm rapid traverse x + z axis: 30 m/min operating hours - idle run: 36443 h spindle hours: 8545 h interface: ja total power requirement: 20 kVA kW dimension swarf conveyor LxWxH: 3,2 x 0,45 x 1,5 Bsdpfxsw S Efzj Am Tswr CNC inclined bed lathe With a 3-jaw chuck Ø 160mm with matching flange (max. speed 4500 rpm) and 2 additional sets of spare jaws. Turret head for 12 tools all with tool drive; Sauter disk turret (C-axis = 300 rpm) Torque main spindle: 95 Nm at 100% and 127 Nm at 40% Chip conveyor 450 K-1/250; year of manufacture 2000 Electric cabinet with Rittal cooling The machine does not have a hydraulic chuck. A manual chuck has been installed by the previous owner. The machine is not functional and is for sale. The machine has an unknown malfunction in the turret, meaning that reference travel and axis movements are not possible. Machining functionality is therefore currently not possible. The machine is for sale and in need of repair! i.D. *

Condition: used, Year of construction: 1980, grinding length 500 mm grinding width 200 mm workpiece height 290 mm Machine from the German Federal Institute of Physics and Metrology - geometrically revised - electrics tested, fully functional, relevant parts replaced - all wear parts replaced - colour light grey, colour condition good Equipment: - electro magnet 500x200mm - grinding spindle overhauled 2-axis display for Y and Z axes Automatic delivery for Y and Z axes Y-axis with zero shutdown Manual hand dresser Stepless speed for grinding wheel V-constant via disc wear Paper band filter system, used Max. height with 250 disc diameter 290mm max. grinding area 600x250mm max. load incl. magnet 100kg Warranty: 1 year on geometry and electronics, Germany-wide Delivery: ex works Shipping time: immediately Payment: before pickup Bwsdpfjwb Hygex Am Tjr Acceptance at our premises Shipping according to your specifications

Condition: used, Year of construction: 1997, The bending press was manufactured in 1997 in England by EDWARDS PEARSON. The folding press is in good condition, sold with tools. Always serviced and maintained on time. The machine tools are connected and can be tested and inspected. Specification: Model: EDWARDS PEARSON 100/3100 PR6 Year: 1997 Bodpfx Amorfx Uto Tjwr Working length: 3 100 mm Bending capacity: 100 T Travel: 172 mm Distance between table and frame: 450 mm Working speed: 100 mm/s Return speed: 110 mm/s Axes: auto X1, X2, Y1, Y2, Z1 , Z2 , R Tools: Available Weight: 7 T Other: New screen recently replaced, keyboard attached for ease of use. If you have more questions, we will be happy to answer.

Year of construction: 2014, condition: good (used), For sale: a Nilfisk compact safety industrial vacuum cleaner Type CTS40 M Z22 400 V 4 kW 9 A 50 Hz 114 kg Explosion-proof The vacuum cleaner is in good condition and ready for immediate use. Machine buying and selling WE BUY/SELL PRODUCTION AND METALWORKING MACHINES, AMONG OTHER THINGS. Do you need a high-quality, yet affordable, metalworking machine for your production? Or would you like to sell yours? For more information or to contact us, please visit our website. Bjdehu Sf Hjpfx Am Tjwr

Condition: used, Year of construction: 2019, power: 30 kW (40.79 HP), volume flow: 4.95 m³/h, pressure (max.): 12.75 bar, Atlas Copco AQ30VSD FF Air Compressor Manufacturer: Atlas Copco Model: AQ30VSD FF Year of manufacture: 2019 Country of origin: Belgium Maximum pressure: 12.75 bar Power: 30 kW Free air delivery: 4.95 m³/min Air flow rate: 82.5 l/s, 174.8 cfm, 4.95 m³/min Motor power: 40 HP Motor speed: 8,600 rpm Weight: 702 kg Power supply: 400 V, 50 Hz, 3 phase Bedpfxjxk U Ars Am Tjwr Design: Oil-free ISO class: 8573-1 Class 0 Control system: Elektronikon Graphic Equipment: SMARTLINK Origin: Made in Belgium No liability is accepted for the accuracy, completeness, or timeliness of the information provided.

Year of construction: 2019, operating hours: 4,525 h, condition: ready for operation (used), functionality: fully functional, machine/vehicle number: 12, BAR PEELING MACHINE AND BAR STRAIGHTENING MACHINE IN SET The equipment is in perfect working condition and can be inspected under power. Fully retrofitted in 2019 (completely new mechanics and electronics) Working range: Ø 20 – Ø 80 mm Bars length: 2.5 – 6.0 m Processing tolerance: ISO h9 (possible h8) Peeling depth: up to 3.5 mm, depends on the steel type Steel types: carbon steel, bearing steel, spring steel, etc. Feeding speed: digitally adjustable 0.5 – 12 m/min Cutting head revolutions: up to 1700 RPM Cutting tools: two sets of 4 knives each with automatic digital positioning (triangular and long knifes) Automotive loading table with bar counter Feeding roller with motorized height adjustment Infeed pressure rolls – 4 vertical rolls with inverted DC motor Peeling machine, consists of: Bwsdpfewqb Scox Am Tsr - Front guiding system - Peeling head with 4 knifes - Rear guiding system Bar extraction carriage Main motor and transmission Output pressing rolls - tween Unloading table with motorized height adjustment Collector with counter and automatic collection of finished bars Hydraulic unit – completely new Electric cabinet – new of two modules.

Condition: excellent (used), Year of construction: 2007, STAR ECAS 12 CNC Swiss-type lathe TECHNICAL DATA Maximum machining diameter: 13mm Max. headstock stroke: 205 mm Maximum drilling capability: Stationary tool: 10 mm Power driven tool: 8 mm Maximum tapping capability: Stationary tool: M8 x P 1.25 Power driven tool: M6 X P1.0 Maximum milling capability: 10mm Maximum die cutting capability: M8 x P1.25 Maximum slotting capability: 1.5 x 4 mm Feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Maximum turning feed rate: Z1, X1, Y1, Z2, X2, Z3, X3, Y3: 18,000 mm/min C1, C2: 194,400°/min Minimum input increment: X1, X2, X3: 0.001 mm Z1, Z2, Z3, Y1, Y3: 0.001 mm C1, C2: 0.001° Spindle speed: 12,000 rpm Indexing angle: 0.01° Dimensions: 2588 x 1150 x 1765 mm Center height: 1040 mm Weight: 3500 kg SCOPE OF OFFER INCLUDES (list not exhaustive): Star Ecas 12 CNC lathe Coolant tank / pump High-pressure system Bedpfxowf Acle Am Towr Transformer Operating documentation Exact scope of offer as shown in the photo gallery No liability is assumed for the accuracy, completeness, or timeliness of the information.

Condition: reconditioned (used), Round table polishing machine make Bula, model MP81 for sale. Continuously turning machine for polishing, brushing, grinding and deburring a wide variety of workpieces. 6 workpiece holders mounted in a pitch circle of 250 mm. 1 processing station, drive power 2.2 kW, with Bula Quick Lock system of the polishing wheels. Polishing shaft diameter 25 mm The machine has been completely overhauled, machine body sandblasted, primed, repainted, new bearings, new motors, new gearbox, new V-belts, new handwheels, new pulleys, completely new control cabinet, and all drives are controlled by frequency converters. Bwsdpelccvmjfx Am Ter Subject to prior sale. Optionally, the system could also be supplied with a polishing paste system - liquid, consisting of 1 high-pressure dosing pistol WIDOBERG HDP-2, brackets, timer, etc. and pressure container.

Condition: good (used), GENERAL CHARACTERISTICS Max. Ø to be ground 120 mm Grinding wheel width 250 mm Minimum Ø to be ground 1 mm Ø drive grinding wheel 304 mm Ø working wheel 508 mm DIMENSIONS AND WEIGHT Height 1,700 mm Width 1,500 mm Length 2,750 mm Weight 4,000kg ELECTRICAL CHARACTERISTICS Grinding head motor power 15 Kw Spindle head motor power 1,8kw Bedpforpnf Asx Am Towr Hydraulic motor power 1,1kw Total power 20 kW Voltage 220/380 V

Condition: excellent (used), Year of construction: 2009, functionality: fully functional, MAZAK QUICK TURN NEXUS 100-II MSY Max. machining diameter: 280 mm Max. machining length: 400 mm Max. milling speed: 4,500 rpm Max. spindle speed: 6,000 rpm Max. bar diameter: 42 mm Machine is equipped with: Bodoy S A Rijpfx Am Tswr - CNC control: Mazatrol Matrix - KITAGAWA 3-jaw chuck B-206 for main spindle - KITAGAWA 3-jaw chuck B-205 for 2nd spindle - Tool Eye - C-axis - Y-axis - Interface for bar loader magazine - Automatic parts catcher - Reinforced coolant pump - 8 units of fixed tool holders - 2 units of powered tool holders