Center lathe

Colchester Mastiff 1400

Condition: used, greates pass round over bed 540 mm swing diameter over face slide 370 mm centre distance 3000 mm centre height 270 mm turning dia. in gap 815 mm bed width 344 mm spindle bore 88 mm spindle diameter in front bearing 133 mm spindle taper 11" D1 Camlock turning speed range 18-1400 U/min turning speeds 16 3-jaw chuck Röhm Ø 315 longitudinal feeds: 0,06-1,0 mm face feeds 0,03-0,5 mm metric threading 0,4-14 mm inch threading 2-72 G/1" thread - module 0,3-3,5 mm thread - DP 8-60 Pitch tailstock quill diameter 75 mm Lhsdpfxoxnqzxs Ah Ujr quill stroke 230 mm taper of tail spindle MK 5 slide valve travel 280 mm upper head travel 150 mm Overall size ca. 4700 x 1100 x 1400 mm weight ca. 3200 kg power capacity 9,4 kW Accessories: 3-axis digital display Fagor Röhm wedge bar chuck Ø 315 mm Multifix steel holder size C incl. 6 interchangeable cassettes Rotating center point Turning chuck guard Rear chip guard Coolant device Work light manual available

Condition: ready for operation (used), functionality: fully functional, HURON NU-4 is equipped with several buttons, switches and levers to control its operations. x-travel: 1100 mm y-travel: 700 mm z-travel: 500 mm spindle/table distance: 9-509 mm spindle head - swivelling: 360°. spindle taper: SK 40 Meziv spindle speed range: 30 - 2066 rpm spindle speed steps: 27 feed rates: 1.6 - 820 mm/min Ljdperiulgsfx Ah Ushr feed steps: 27 table surface: 1435 x 460 mm rapid traverse on X and Y axes: 2.8 m/min rapid traverse on Z axis: 1.4 m/min total power requirement: 10 PS(HP) weight of the machine approx.: 3.1 t dimensions of the machine approx.: 2.36 x 1.65 x 1.45 m (w x h x d)

Condition: new, Year of construction: 1970, turning diameter over bed 540 mm turning diameter over slide rest 365 mm turning length 2000 mm turning diameter in the gap 800 mm turning speeds 18 - 1400 U/min centre height 270 mm spindle bore 90 mm Lhodpfxexpiz To Ah Uor total power requirement 11,0 kW weight of the machine ca. 2,6 t dimensions of the machine ca. 3,7 x 1,4 x 1,8 m - Multifix Size B - 3-Jaw Chuck 315mm - Chuck Guard - Emergency Stop Device - Foot Switch - Chip Tray - Centering Center

Condition: refurbished (used), Gap Bed machine Between centers: 60” Swing over bed: 22" Spindle speeds: 18 - 1400RPM Spindle bore: 3 1/2" Diameter 90mm Chuck mounting: D1 - 11 Tailstock taper: No 5 Morse Tool Post: Quick Change 4 holders & Keys New 3 Jaw Chuck Coolant New 2 Axis DRO System Chuck guard TBC Lsdpfx Asq N Ay Aoh Uohr 6-month warranty

Condition: excellent (used), Year of construction: 2022, functionality: fully functional, Options: Chip conveyor Renishaw RMP 60 15 bar coolant Air blow-off Performance package 8 MB memory expansion 2 additional M codes Central partition Portable handwheel Lodjwnbn Sopfx Ah Ushr 4th axis preparation 3-color lamp

Condition: good (used), Colchester Mastiff 1400 lathe for sale. The machine comes from a workshop that has ceased operations. Fully operational and ready for use. Ledow Al T Uspfx Ah Ujhr For more information, please contact us.

Condition: reconditioned (used), Modernized machine with new LTG-StoreControl P control system Control system expansion available optionally External dimensions: Height 8,700 mm Width 3,500 mm Depth 1,580 mm 51 supports with a payload of 350 kg each In the clear usable dimensions: H = 255 mm W = 3,050 mm Lhodpsd Spf Rsfx Ah Ujr D = 520 mm Chain pitch 305 mm 51 galvanized intermediate shelves Total payload up to 19,000 kg Storage table at 990 mm above floor level with stainless steel worktop, 315 mm deep Color: gray Drive motor power: 1 x 3.8 kW / 400 volts Subject to errors and technical changes, Surfaces cleaned, signs of wear and minor deformations possible Delivery & installation currently mainly in Germany, Austria and other neighboring countries

Condition: excellent (used), Year of construction: 2000, Colchester Student 2500 3-axis digital readout Collet chuck setup Lodpew R S Awjfx Ah Ujhr Various accessories

Condition: excellent (used), Year of construction: 2016, operating hours: 9,738 h, functionality: fully functional, travel distance X-axis: 1,020 mm, travel distance Y-axis: 610 mm, travel distance Z-axis: 610 mm, controller manufacturer: Fanuc 31 iB, table width: 600 mm, table length: 1,200 mm, table load: 500 kg, spindle speed (max.): 15,000 rpm, spindle motor power: 18 W, number of slots in tool magazine: 48, Manufacturer Matsuura Model VX-1000 Year 2016 Control Fanuc 31iB Data: Table size 1200 x 600 mm Table load 500 kg Traverses X/Y/Z 1020/610/610 mm Rapids X,Y/Z 40,40/36 m/min. Spindle taper ISO 40 Spindle drive motor 18,5/15 kW AC Spindle speeds 40 – 15000 rpm Tool taper BT-40 Big plus Tool magazine positions 48 station Tool diameter with/without adjacent tools 96/150 mm Tool length 350 mm Tool weight 10 kg Machine dimension LxWxH 2,52 x 2,85 x 3,4 m Lhodpfxswtfu Ho Ah Uor Machine Weight 8.000 kg Equipment: Chip conveyor, coolant through the spindle 20 bar, 8 extra M-Functions, Renishaw Probe OMP 60, Tool breakage control.

Condition: good (used), Lead and feed spindle lathe Matra SM-3000 Country of origin: Spain Lhjdpfovq I Npex Ah Usr Turning diameter over bed 600 mm Turning diameter over support 370 mm Turning length 3000 mm Turning diameter in the crank 900 mm Length of the crank 280 mm Spindle bore 72 mm Speed range 17-1,652 rpm Spindle speed levels 36 Main motor, power 9/11 kW Rapid traverse longitudinal-transverse Tailstock MK5 Machine weight approx. 4 t Dimensions (LxW) approx. 4800x1300mm Equipment/accessories: - Fixed steady rest with rollers/max. Workpiece diameter 220 mm - Coolant system - Bed stop - Röhm lathe chuck D500mm - Digital display 2-axis SINO - Multifix C base holder The machine is in very good, fully operational condition. Price net, free loading from warehouse